1. PROCESS JOURNAL
APRIL 1, 2011 FRIDAY
MEASURE, MARK OUT AND CUT THE LEG OF THE STOOL
WHAT I DID:
Today, i started to cutting the legs of the stool in the beginning of the class. Then
Mr. anderson find some people were not doing the right things. Like some of the people
didn’t used the right way to measure the legs and they started to cut. We need to cut the
legs with the bench, we need to use metal rule to carefully measure it, and we also need to
use try square to draw the lines around the legs. So i started to measure it again to make
sure that the length of my stool’s legs is right. I thought i can finished cutting the legs
today, but there were something wrong i did, so i only finished cutting one leg, i think i
need to catch up a little bit in next class.
WHY:
The reason why i measured everything again is that Mr. Anderson told us that if we
measure wrong everything will be wrong, so i carefully measured and marked everything
again. I think it was better to measured again, because i don’t want my project to be fail in
the end.
WHAT NEXT:
I think i will continued to cutting the legs of the stool and also measured it in the
next class. I think i really need to catch up next class.
EMOTION:
I think my emotion today was not really bad, because i didn’t have anything wrong,
and i had a really good time during the class, and i talk to my friend a lot of stuff about the
project, we gave suggestion to others. I feel really comfortable today.
CHANGES TO YOU PLAN:
The changes to my plan were that i thought i can finished cutting the legs today, but
i didn’t because i had measured and marked the legs again, to make sure that i will cut on
the right place.
2. AOI:
I think the AOI were related to our class
today were Healthy, because we all were
wearing apron to protect ourselves and some
of the students were wear the goggles when
they were used some of the bigger machine.
Community was also one of the AOI that was
related to our class, because we all were
talking to each other about our project and we
gave suggestion about the project to others.
This is a picture shows that i was using a
pencil and metal rule to measured the length
of the legs. I also used the bench to put the
leg on there.
This is a picture shows that i was using a
pencil and try square to drew the lines around
the leg. I also used the bench to put the leg on
there.
3. This is a picture shows that i was used a tenon saw to cut the leg. I used the bench to put
the leg on there too.