The document specifies requirements for an electronic stopwatch that will be used to measure time during water discharge and pumping tests. It must have a stopwatch range over 59 minutes, count down range of 59 minutes, resolution of 0.1 seconds, and accuracy of 0.1 seconds over 1 hour. Additional requirements include an LCD display, water resistant enclosure, battery life of over 1 year, and instrument lifetime of over 5 years. It needs to operate from 0 to 50 degrees Celsius and survive drops on concrete.
1. 10.011 ELECTRONIC STOPWATCH
Approval Date: 20 May 1998
Reviewed on : 23 October 2007 Version: 1
Equipment Specification: ELECTRONIC STOPWATCH Version 1 10.011-1/2
Purpose
The electronic stopwatch will be used during discharge measurements with ‘rotating element’
current meters and during pumping tests. The revolution counter integration time and the time
lapsed from the starting of pumping at specified intervals of time will be measured with the
stopwatch.
Conditions & Requirements
• The instrument shall be compatible with the environment of operation.
• The instrument shall be adequate for the application and the mode of working.
Specifications
range stopwatch >59 minutes
range count down 59 minutes
resolution 0.1 s
accuracy 0.1 s over 1 hour
stopwatch modes lap time, split time
display LCD, good visibility in daylight
enclosure water resistant
power supply standard button cell(s)
battery lifetime >1 year
instrument life time >5 years of operation
temperature range 0 to 50 °C
robustness the instrument shall survive several drops on concrete
housing splash waterproof
Consumables
• batteries
2. 10.011 ELECTRONIC STOPWATCH
As per HP-I
Approval Date: 20 May 1998 Version: 1
Equipment Specification: ELECTRONIC STOPWATCH Version 1 10.011-2/2
Purpose
The electronic stopwatch will be used during discharge measurements with ‘rotating element’
current meters and during pumping tests. The revolution counter integration time and the time
lapsed from the starting of pumping at specified intervals of time will be measured with the
stopwatch.
Conditions & Requirements
• The instrument shall be compatible with the environment of operation.
• The instrument shall be adequate for the application and the mode of working.
Specifications
range stopwatch >59 minutes
range count down 59 minutes
resolution 0.1 s
accuracy 0.1 s over 1 hour
stopwatch modes lap time, split time
display LCD, good visibility in daylight
enclosure water resistant
power supply standard button cell(s)
battery lifetime >1 year
instrument life time >5 years of operation
temperature range 0 to 50 °C
robustness the instrument shall survive several drops on concrete
housing splash waterproof
Consumables
• batteries