2. Rev 6
ITEM
1
2
ITEM NAME
PLC
PROGRAMMING
FITTINGS
3
MOTOR
ITEM MANUFACTURER
ALAN BRADLEY/SIEMENS OR
EQUIVALENT
PARKER/REXROTH/VICKERS OR
EQUIVALENT
WONDER, STAFFA, PARKER OR
EQUIVALENT
SCOPE OF SUPPLY – 30T 8 POINT MOORING WINCH/10 TON ANCHOR WINDLASS
ITEM
ITEM NAME
SUB-ITEM
ITEM DESCRIPTION
QTY
1.
SPREAD
MOORING
SYSTEMS
1.1
30 TON SINGLE
DRUM HYDRAULIC
MOORING WINCH
WITH SPOOLING
DEVICE
8
1.2
LOCAL CONTROL
STATIONS
ATTACHED WITH
MOORING WINCHES
8
1.3
CENTRAL REMOTE
CONTROL
PANELFOR 8 POINT
MOORING WINCHES
(DROP IN TYPE
PANEL)
2 X 45 KW
ELECTROHYDRAULIC POWER
1
1.4
2
3. PACK
1.5
ELECTRIC MOTOR
STARTER PANEL
2
1.6
WIRE TENSION &
WIRE LENGTH
MONITORING
SYSTEM FOR 8
WINCHES
1
2
CCTV
2.1
SPLIT DISPLAY
WITH 10
CAMERAS(1
DISPLAY FOR 5
WINCHES)
2
3
CRANE
3.1
1
4
ANCHOR
WINDLASS
4.1
5T X 15M/10T X 10M
TELESCOPIC
SLEWING CRANE
10 TON X 10 M/MIN
ANCHOR WINDLASS
WITH ATTACHED
MANUAL CONTROL
4.2
BV CLASS
CERTIICATE
1
1
5
COMMISSIONING
5.1
COMMISSIONING
AND
INSTALLATION
SUPERVISION (1
MAN X 2
DAYS)ADDITIONAL
DAYS @
USD$800/MAN/DAY
1 LOT
6
MANUAL
6.1
OPERATORS
MAINTENANCE
MANUAL
3
SETS
TECHNICAL SPECIFICATIONS
The mooring winch mechanical operation will have the following features:
• Wire Drum have free fall mode
• Brakes to create tension and ensure smooth spooling operation during free fall
• Spooling Device disengages during free fall
4. •
Wire payout reset counter
ITEM 1 – 30 TON SINGLE DRUM HYDRAULIC MOORING WINCH
Single Drum mooring winch, two left and two right hand configuration. Each winch
comprises a single mooring drum, driven by a single displacement, low speed high torque
hydraulic motor via double stage spur gear reduction.
The winch is equipped with spooling assembly to ensure proper laying of wire rope on
the drum. The winch is completed with steel fabricated skid frame, to house all the parts and
components and is designed for deck mounting type.
The winches are to be powered by two units of electro-hydraulic power packs
Every winch is to be supplied with a local control stand. A central
control panel to be located in the wheelhouse is supplied for remotely control.
ITEM 1.1 – 30 TON SINGLE DRUM HYDRAULIC MOORING WINCH
Specification
Type
Hydraulic motor used
Drum Capacity
Drum Pull (1st layer)
Drum Brake Holding
Power Required
Brake
Drive
Clutch Type
Control
Bearing Type
: Single drum with automatic spooling device
: “Staffa” /Equivalent
: 800 M X 30mm dia. (SWR) 12 Layers
Duty
: 30 T X 0 – 6m/min.
: 45 T at 1st layer static
: Approx. 45kW
: Spring loaded, hydraulic release.
Fail Safe Type.
: Hydraulic motor via double stages
spur gear reduction.
: Hydraulic operated claw clutch
: Local & Remote Control
: Spherical Roller Bearing with mild steel housing
ITEM 1.2 – LOCAL CONTROL STATIONS AT MOORING WINCH
The panel control functions are:• Heave / Payout Joy stick.
• Main system pressure gauge.
• Emergency STOP button.
• Brake open/close .
• Clutch in/out
5. ITEM 1.3 - CENTRAL REMOTE CONTROL PANEL FOR MOORING WINCH
The following control features would be incorporated:• Heave / Payout Joy stick.
• Pressure display for main system
• Emergency STOP button.
• Power Pack START / STOP button.
• Low oil level Audio & Visual Alarm.
• High temperature Audio & Visual Alarm.
• Dimmer.
• Brake-open/close indication.
• Clutch IN / OUT button with indication
• Control Station Selector Local / Remote.
ITEM 1.4 – ELECTRO-HYDRAULIC POWER PACK (2UNITS).
Electric Motor
Oil Cooler with pump
Hydraulic pump
Hydraulic Oil Tank
: 2 X 45Kw, 1 X 7.5Kw,Ip55, 440V, 3PH, 60Hz
With thermistor , space heater.
: Included
: “Parker” or “Rexroth” Or Equivalent
: 1500 litres capacity with tank accessories
Note : 4 winches operated together, the speed will be reduced half
ITEM 1.5 – ELECTRIC MOTOR STARTER PANEL
Electric Motor Starter Panel Specification (Per Unit)
2 X star delta for 45kW motor.
1 X DOL starter for 7.5kW motor.
ITEM 1.6 – WIRE TENSION & WIRE LENGTH MONITORING SYSTEM
•
•
Preset Tension/ length facilities will be provided
Over length/over tension alarm status will be provided
ITEM 2. 1 - CCTV SPECIFICATION
1. A CCTV monitoring system will be provided with 10 cameras to be mounted near to winches on board the
barge (customer to install CCTV and wiring on board vessel)
2. 2 Nos of 5 split screen for viewing cameras
1. CCTV-CAMERA, Fixed Stainless Steel 316 Camera Station, Mini Col. Cam,
IP68 PAL, Stainless Steel 316L.comes with 3m flying lead, mounting bracket and local junction Box IP66,
110 VAC input power supply, power distribution to 4 cameras and Quad
- 10 Nos
2. Mounting plate. Quad to be separately - 2 Nos
3
QUAD Video Unit 2 unit
- 2 Nos
4
10M Coax Cable Pre-fitted with Connectors - 2Nos
5
CCTV-MONITOR,18.1"Flat Panel Monitor w/resistive - 2 Nos
6.
Power Supply ,Input:110/220Vac,
47-63Hz,Output:12Vdc@6Amp,Ambient Range: 0+50degC - 2 Nos
6. Item 3.1 – 5 Ton x 15m/10 Ton X 10m Hydraulic Telescopic Slewing Crane
Specification
Model
Type
Safe Working Load
: IOCR-52-010T-010M
: Hydraulic, Single Stage Fixed Boom
: 10.0 Tons @ 10 meter
: 5.0 Tons @ 15 meter
Max Boom outreach
: 15 meter
Max Hoisting Speed
Operating conditions
Max Lifting Distance
Luffing Time / Sector
Slewing Speed / Sector
Slew Drive Unit
Hydraulic Power Pack
: 10 m/min
: 5º heel/ 2 º trim static
: 40 meter
: 60 sec / 0 deg to 70 deg
: 0- 0.5 rpm / 355 deg
: Hydraulic Motor with Planetary gear reduction
: Built into crane pedestal
Working Environment
: Safe Area
Operating Temperature : 0°C to 45°C
Local Control Panel
: SS316 Panel / Junction Box
: Weather proof Cover / IP 56 Protection
Safety Features
: Pressure Relief Valve built-in
: Auto brake on winch / slewing motors
: Mechanical limit for hook
Certification
: Maker’s Certificate, Designed in Accordance with ABS Rules for Lifting Appliance
Power Required
: 440V/60 HZ, 37KW
ITEM 4 – 10 TON ANCHOR WINDLAS BV CERTIFICATE
One (1) set electro-hydraulic anchor windlass, with local control at site suitable for specified diameter cable complete
with one single gypsy and one warping head are to be provided.
Capacities - 10 Ton X 10 m/min for chain cables.
ITEM 4.1 - 10 TON X 10 M/MIN ANCHOR WINDLASS
Duty Pull
: 10 Ton at 10 m/min.
Overload Pull
: 15 Ton
Brake Holding
: 48 Ton at static
Brake Assembly
: Manual
Chain Gypsy
: 38 mm dia. U3 Type
Clutch
: Hydraulic Operated jaw clutch with
manual override Manual operated jaw
clutch
: 380mm dia.
: Hydraulic motor via spur gear
reduction with gear cover.
: Local stand
Warping End
Drive
Control
7. TERMS AND CONDITIONS
EXCLUSIONS
• Installation Equipment and Material.
• Crane Boom Rest.
• Supply of equipment foundation skid and installation of equipment on board.
• Interconnecting Electrical Cables / Hydraulic Hoses, Piping and Fittings outside of equipment.
• Supply and coiling of wire ropes (Crane comes with rope and hook block).
• Supply of hydraulic oil or lubricating oil.
• Flushing of hydraulic system (Is not supply with a build-in hydraulic system).
• GST and any other local government taxes.
DELIVERY PERIOD
• 16 - 18 weeks upon receipt of down payment.
• Delivery period may be extended by the amount of time that the implementation of the agreement is delayed by force
majeure.
• If delay in delivery is by force majeure, the delivery time is prolonged to the extent which is found reasonable
according to the circumstances.
• Unless expressly agreed otherwise by the Parties, the phrase “Delay Penalty”, or other similar phrase, shall mean the
compensation owed by the Vendor as liquidated damages for harm to the Buyer caused by a delay of delivery. The
“Delay Penalty” is exclusively attributed to the vendor or its subcontractors and shall not apply to the entire Order but
only to the Products affected by a delivery delay.
• A “Delay Penalty” included in an Order shall always apply: only to a delay exclusively attributable to the Vendor or
its subcontractors; only after prior written notice by the Buyer; and only after the expiration of a ten (10) calendar days
grace period, beyond he contractual delivery date, within which such a delay penalties clause shall be inapplicable.
The maximum of any such penalty for delayed delivery of Products shall never exceed five percent (5%) of said
Products’ Order price, before taxes.
The Buyer will have the right to terminate the contract by giving 10 days’ notice in writing to the Vendor party, if a delay
is exclusively attributable to the Vendor or its subcontractors as expressed in the “Delay Penalty” phrase, and the Buyer
shall have the right to terminate and fully compensated to the Products affected by the delivery delay date. Otherwise, a
termination is not allowed by the Buyer upon commencement.
PACKING
The equipment will be supplied complete and loose items plastic wrapped on wooden pallets suitable for seatransportation.
FACTORY ACCEPTANCE TEST
Test according to Maker’s standard and rules, Optional Class witness of Factory Acceptance Test.
SITE INSTALLATION SUPERVISION AND COMMISSIONING
All commissioning outside of Singapore will be based on Seller’s standard rate unless expressly agreed. All related
expenses, including travel, accommodation, and food etc., for all commissioning, inspection, testing, assembly and
installation works done outside of Singapore will be borne by the Buyer. All such expenses shall be reimbursable at cost
plus 10%. All travelling time requested by the Buyer or directly related to the scope of work will be billed at half the daily
rate. The Buyer will provide the necessary manpower to facilitate the testing and commissioning of the equipment.
Labour price quoted is for normal working hours and not inclusive of weekends, holiday or overtime charges. Any
additional requirements will be charged accordingly.
WARRANTY
8. 12 months after commissioning or up to 18 months from ex-factory basis whichever comes first.
(Seller’s standard terms and conditions to apply.)
QUOTATION VALIDITY
30 days from the date of this quotation.
rmation.