Enmat v2.1 details of each chart

Daily Consumption

Copyright 2013 Envantage Ltd

Daily Consumption
The daily consumption graph
shows kWh consumption over
a specified time. It separates
different energy types by
colour and also by day/night
time hours which is set in
ENMAT’s tariff settings.

Daily Consumption
1 year in
daily data
sets


Daily Consumption
1 year in
weekly data
sets


Daily Consumption
2 days in 1
hourly data
sets


Average Power Factor


Average Power Factor
Power factor is a measure of how effectively
electrical power is being used. A high power
factor indicates efficient use of the electrical
distribution system while a low power factor
indicates poor use of the system.


Peak Demand


Peak demand shows Authorised
Peak Demand (ASC) from the
electricity distribution company.
The graph shows Actual Peak
Demand of the site against
Authorised Peak Demand.
If you exceed your ASC you may
be prone to power cuts, blown
fuses and general electrical
failure.


Maximum Demand


Maximum Demand
The Maximum Demand Chart is
showing usage data in Kw.
This chart is showing what is
being used on site.


Detailed Chart


Detailed Chart
The detailed chart shows kWh
over time. It is useful for
identifying gaps in readings or
for spike monitoring.


Energy Consumption Chart


Energy Consumption Chart
The Energy Consumption chart
shows kWh consumption over a
specified time. It separates
different energy types by colour
and also by day/night time hours
which is set in ENMAT’s tariff
settings. It is similar to the
Consumption Chart, but clusters
the energy types and day/night
splits side by side rather than
stacked on top of one another.


Cost per M2


Cost per M2
Cost per M2 provides a useful
costing analysis based on the date
range specified and a site’s tariff
against the surface area of the
entire site, or sub metered area.
The calculations used are the cost
divided by M2.


kWh per M2


kWh per M2
kWh per M2 is based on the date
range specified against a
company, site or sub meted area
against the surface area of the
entire site, or sub metered area. It
provides Energy Managers
information on the kWh output of
a specified surface area.


Power Factor Detail


Power Factor Detail
The Power Factor Detail
Chart shows two lines
through the chart over a
specified time. Line 1
illustrates power factor,
whilst line 2 illustrates kVA
(Kilovolt Amperes)


Power Factor Gauge


Power Factor Gauge
The Power Factor Gauge provides a useful
outlook on how effectively electrical power is
being used on site.

The value on the PF gauge is the average
power factor for the period date range
specified, scaled up by 100. It provides Energy
Managers with an overview of actual power
factor against a red, amber and green
guidance.
0.95 and above = Green
0.85-0.95 = Amber
0.85 and below = Red


Production per kWh


Production per kWh
Production per kWh graph
shows Energy Managers
the energy usage against
unit of production.
The unit of production
method is useful when the
property's value is more
closely related to the
number of units it
produces than the number
of years it is in use.
This graph is useful to
understand the optimum
throughput and the
minimum energy used to
achieve this.

Site Usage Summary


Site Usage Summary
The site usage summary
provides a useful kWh and cost
benchmark against a previous
time. It outlines YTD against
last year, depending on the
date ranges you specify and
then calculates the variance
differential based on red,
amber and green targets,
which are typically:
10% + = Red
0-9.9% = Amber
0% and under = Green


Co2 Emissions


Carbon Emissions Factors
ENMAT uses the DECC Carbon
Emissions Factors to provide a
more accurate reading of a site’s
carbon emissions.


Energy Target Setting


Energy Target Setting
ENMAT’s Energy Target Charts
allows the user to view the
following:
• Current Average
Consumption for period
selected
• vs past consumption (e.g.
last year) for period
selected
• vs the target that has been
set e.g. 10+ = red, 0-9% =
Amber, 05 or under =
Green


When you specify date ranges ENMAT averages the days specified from
last year against current year

Summary Pie Charts


Summary Pie Charts
Summary Pie charts
provide an overview of
the following:
• Breakdown of
day/night
consumption
• Week/weekend
consumption
• Breakdown of
consumption by site/
or sub meter areas
• Elec, Gas and Co2
Emissions breakdown
over day/night

Site Usage


Site Usage

The Site Usage Summary provides Energy Managers with a “Bird’s Eye View” of current
energy consumption against a previous time (benchmark) it can be used to compare
consumption on sites or sub metered areas.


Period Summary


Period Summary
The period summary provides a
useful outlook on electricity and
gas usage comparing static costs
against variable consumption
costs. It summarises day and night
energy usage differentials against
typical static costs such as standing
charges.


Bill Forecasting
ENMAT Calculates a customer’s Energy Bill by taking the kWh recorded and
calculating this against the following costs that are applied by the energy
supplier:
• Day Rate e.g. £15 per kWh
• Night Rate e.g. £17 per kWh
• Standing Charge - £50 P/M Also known as fixed charge, this typically covers the cost of
reading and maintaining energy supply meters, sending bills etc.

•
•
•
•

PF Threshold (Guidance) e.g. 11 kWh/KVARH
ASC (Available Supply Capacity) 300 KVA/Month
AC Charge e.g. £400 per kVA
AC Charge Type Fixed Monthly


Bill forecasting and Cost


Bill Forecasting
Now that we have
created the
predicted energy bill
we can also design
advanced graphical
interfaces


Degree Days


Degree Days


ENMAT uses HDD and has
taken an average of 15.5.
You then subtract the 2.7
degree day or whatever the
values are for each region
of each day which will give
you the recommended
heating value that you
need to heat to get the
building to 15.5 which is
the standard building
temperature for the UK.

The x axis is representative
of the total degrees needed
to heat the building, so it
could be that I needed to
produce 450 degrees in 3
months to heat my
building, for example

Main Dashboard


Main Dashboard
The Main dashboard is a
customisable dashboard allowing
users to choose the charts they
wish to view on one page.


Main Dashboard
Selecting the Edit Button as
highlighted takes the user into
the customise dashboard
options page.


Main Dashboard
Here users can drag available
dashboards from the right
hand side list, to the left
hand side of the screen. The
left hand side screen is the
list of graphs which will be
displayed on a single page.


Contact us today for more information
Envantage Ltd
8 Grange Lane
Didsbury
Manchester
M20 6RW
Tel: +44(0) 161 448 7722
Fax: +44(0) 161 448 7722
Email: info@en-mat.com
Web: www.en-mat.com

Enmat v2.1 details of each chart

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to Enmat v2.1 details of each chart

Similar to Enmat v2.1 details of each chart (20)

More from ENMAT Energy

More from ENMAT Energy (6)

Recently uploaded

Recently uploaded (20)

Enmat v2.1 details of each chart