SlideShare a Scribd company logo
1 of 18
You can do it I will show you how!
You will Need:
          A tube of caulk
          Caulk gun
          Thin rubber gloves (optional)
          Sponge if using latex caulk
First determine which type of
caulk you need:
           There are two basic types of caulk
The two types of caulk
are:
Latex and Silicone
The Differences Are:
                                 Silicone
Latex
 Use on wood, walls & other      Use on wet surfaces (around
    dry surfaces                     sinks, faucets, tubs)
                                
    Dries fast (2 hours)             Mold & mildew resistant
                                
    Can be painted                   Won’t shrink or crack
                                
    Can be used to patch small       Use on ceramic tile, glass,
    holes and gaps                   metal, plastic & wood
                                
    Flexible but can shrink          Not paintable
Next    Be sure to follow package directions
           Temperature and weather are
            important!
        Clean area to be caulked
           Remove dirt, grease and moisture
           Remove old caulk
Bead Size
             The “bead” is the caulk that comes
             out of the tube

             The size of the bead depends on
             the amount of caulk you need to
             fill the gap or hole

             You can control the size of the
             bead by where you cut the nozzle
             on the tube of caulk
Bead Size
•The size of the bead
depends on where
you cut the nozzle.

•The closer to the
end the smaller the
bead.

•The further from
the end the larger
the amount of caulk.
Loading the Caulk Gun
  Push lever at end of gun and hold in place


  At the same time pull metal bar back to allow
  room for caulk tube

  You can now use nozzle (also called spout)
  cutter on the side of the caulk gun
Push Lever

 Pull metal bar
 to allow room
 for cartridge.
Ready to use
 The caulk gun
 is loaded and
 ready to go!
Applying Caulk
            Apply caulk to surface


            Smooth using gloved finger


            Try to avoid excess, use a small
             amount
Before
Note gap in corner of
moulding
After
Gap is filled.
Smooth it out!
        Latex-use a damp sponge
        Silicone use gloved finger
           Be careful silicone is sticky
Let Surface Dry

          For Latex allow 2 hours to dry
          For Silicone allow 24 hours to cure
Congratulations!

  By caulking your own projects you can:
     Avoid costly repairs
     Not have to rely on others to help you
     Be empowered because you can to it
      yourself!
You can do it!



Give it a try!

More Related Content

Similar to A Small Home Project-How to Caulk

Research into steps in making different kinds of sculptures
Research into steps in making different kinds of sculpturesResearch into steps in making different kinds of sculptures
Research into steps in making different kinds of sculptures
Chelsea-Ann Cook
 

Similar to A Small Home Project-How to Caulk (20)

Research into steps in making different kinds of sculptures
Research into steps in making different kinds of sculpturesResearch into steps in making different kinds of sculptures
Research into steps in making different kinds of sculptures
 
How to Build a Solar Bottle Bulb 3.0 (Latest 2013 Updated)
How to Build a Solar Bottle Bulb 3.0 (Latest 2013 Updated)How to Build a Solar Bottle Bulb 3.0 (Latest 2013 Updated)
How to Build a Solar Bottle Bulb 3.0 (Latest 2013 Updated)
 
Part 3 Exterior Painting and Restoration
Part 3  Exterior Painting and RestorationPart 3  Exterior Painting and Restoration
Part 3 Exterior Painting and Restoration
 
Impression techniques
Impression techniquesImpression techniques
Impression techniques
 
Paintyourguitarhotrod
PaintyourguitarhotrodPaintyourguitarhotrod
Paintyourguitarhotrod
 
steps of processing of complete denture (2).pptx
steps of processing of complete denture (2).pptxsteps of processing of complete denture (2).pptx
steps of processing of complete denture (2).pptx
 
Metal Shield Guide
Metal Shield GuideMetal Shield Guide
Metal Shield Guide
 
Metal Shield Guide
Metal Shield GuideMetal Shield Guide
Metal Shield Guide
 
Metal Shield Guide
Metal Shield GuideMetal Shield Guide
Metal Shield Guide
 
ppt
 ppt ppt
ppt
 
Peliculas delgadas pdf
Peliculas delgadas pdfPeliculas delgadas pdf
Peliculas delgadas pdf
 
Clay spec
Clay specClay spec
Clay spec
 
Quetico 2013 Artist Residency Presentation
Quetico 2013 Artist Residency PresentationQuetico 2013 Artist Residency Presentation
Quetico 2013 Artist Residency Presentation
 
Drywall Finishing Tips
Drywall Finishing TipsDrywall Finishing Tips
Drywall Finishing Tips
 
Fused glass Unit
Fused glass UnitFused glass Unit
Fused glass Unit
 
clay
clayclay
clay
 
Water etched clay
Water etched clayWater etched clay
Water etched clay
 
Water etched clay
Water etched clayWater etched clay
Water etched clay
 
Laboratory organization, management and safety methods - Chapter # 03 : LABOR...
Laboratory organization, management and safety methods - Chapter # 03 : LABOR...Laboratory organization, management and safety methods - Chapter # 03 : LABOR...
Laboratory organization, management and safety methods - Chapter # 03 : LABOR...
 
A Natural Spring Water
A Natural Spring  WaterA Natural Spring  Water
A Natural Spring Water
 

Recently uploaded

+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHA...
+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHA...+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHA...
+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHA...
?#DUbAI#??##{{(☎️+971_581248768%)**%*]'#abortion pills for sale in dubai@
 
Architecting Cloud Native Applications
Architecting Cloud Native ApplicationsArchitecting Cloud Native Applications
Architecting Cloud Native Applications
WSO2
 

Recently uploaded (20)

FWD Group - Insurer Innovation Award 2024
FWD Group - Insurer Innovation Award 2024FWD Group - Insurer Innovation Award 2024
FWD Group - Insurer Innovation Award 2024
 
presentation ICT roal in 21st century education
presentation ICT roal in 21st century educationpresentation ICT roal in 21st century education
presentation ICT roal in 21st century education
 
Apidays New York 2024 - The Good, the Bad and the Governed by David O'Neill, ...
Apidays New York 2024 - The Good, the Bad and the Governed by David O'Neill, ...Apidays New York 2024 - The Good, the Bad and the Governed by David O'Neill, ...
Apidays New York 2024 - The Good, the Bad and the Governed by David O'Neill, ...
 
Repurposing LNG terminals for Hydrogen Ammonia: Feasibility and Cost Saving
Repurposing LNG terminals for Hydrogen Ammonia: Feasibility and Cost SavingRepurposing LNG terminals for Hydrogen Ammonia: Feasibility and Cost Saving
Repurposing LNG terminals for Hydrogen Ammonia: Feasibility and Cost Saving
 
MS Copilot expands with MS Graph connectors
MS Copilot expands with MS Graph connectorsMS Copilot expands with MS Graph connectors
MS Copilot expands with MS Graph connectors
 
Rising Above_ Dubai Floods and the Fortitude of Dubai International Airport.pdf
Rising Above_ Dubai Floods and the Fortitude of Dubai International Airport.pdfRising Above_ Dubai Floods and the Fortitude of Dubai International Airport.pdf
Rising Above_ Dubai Floods and the Fortitude of Dubai International Airport.pdf
 
Artificial Intelligence Chap.5 : Uncertainty
Artificial Intelligence Chap.5 : UncertaintyArtificial Intelligence Chap.5 : Uncertainty
Artificial Intelligence Chap.5 : Uncertainty
 
+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHA...
+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHA...+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHA...
+971581248768>> SAFE AND ORIGINAL ABORTION PILLS FOR SALE IN DUBAI AND ABUDHA...
 
Boost Fertility New Invention Ups Success Rates.pdf
Boost Fertility New Invention Ups Success Rates.pdfBoost Fertility New Invention Ups Success Rates.pdf
Boost Fertility New Invention Ups Success Rates.pdf
 
DBX First Quarter 2024 Investor Presentation
DBX First Quarter 2024 Investor PresentationDBX First Quarter 2024 Investor Presentation
DBX First Quarter 2024 Investor Presentation
 
TrustArc Webinar - Unlock the Power of AI-Driven Data Discovery
TrustArc Webinar - Unlock the Power of AI-Driven Data DiscoveryTrustArc Webinar - Unlock the Power of AI-Driven Data Discovery
TrustArc Webinar - Unlock the Power of AI-Driven Data Discovery
 
Polkadot JAM Slides - Token2049 - By Dr. Gavin Wood
Polkadot JAM Slides - Token2049 - By Dr. Gavin WoodPolkadot JAM Slides - Token2049 - By Dr. Gavin Wood
Polkadot JAM Slides - Token2049 - By Dr. Gavin Wood
 
Connector Corner: Accelerate revenue generation using UiPath API-centric busi...
Connector Corner: Accelerate revenue generation using UiPath API-centric busi...Connector Corner: Accelerate revenue generation using UiPath API-centric busi...
Connector Corner: Accelerate revenue generation using UiPath API-centric busi...
 
Apidays New York 2024 - Scaling API-first by Ian Reasor and Radu Cotescu, Adobe
Apidays New York 2024 - Scaling API-first by Ian Reasor and Radu Cotescu, AdobeApidays New York 2024 - Scaling API-first by Ian Reasor and Radu Cotescu, Adobe
Apidays New York 2024 - Scaling API-first by Ian Reasor and Radu Cotescu, Adobe
 
Apidays New York 2024 - Passkeys: Developing APIs to enable passwordless auth...
Apidays New York 2024 - Passkeys: Developing APIs to enable passwordless auth...Apidays New York 2024 - Passkeys: Developing APIs to enable passwordless auth...
Apidays New York 2024 - Passkeys: Developing APIs to enable passwordless auth...
 
Axa Assurance Maroc - Insurer Innovation Award 2024
Axa Assurance Maroc - Insurer Innovation Award 2024Axa Assurance Maroc - Insurer Innovation Award 2024
Axa Assurance Maroc - Insurer Innovation Award 2024
 
Apidays New York 2024 - Accelerating FinTech Innovation by Vasa Krishnan, Fin...
Apidays New York 2024 - Accelerating FinTech Innovation by Vasa Krishnan, Fin...Apidays New York 2024 - Accelerating FinTech Innovation by Vasa Krishnan, Fin...
Apidays New York 2024 - Accelerating FinTech Innovation by Vasa Krishnan, Fin...
 
Architecting Cloud Native Applications
Architecting Cloud Native ApplicationsArchitecting Cloud Native Applications
Architecting Cloud Native Applications
 
Apidays New York 2024 - APIs in 2030: The Risk of Technological Sleepwalk by ...
Apidays New York 2024 - APIs in 2030: The Risk of Technological Sleepwalk by ...Apidays New York 2024 - APIs in 2030: The Risk of Technological Sleepwalk by ...
Apidays New York 2024 - APIs in 2030: The Risk of Technological Sleepwalk by ...
 
AWS Community Day CPH - Three problems of Terraform
AWS Community Day CPH - Three problems of TerraformAWS Community Day CPH - Three problems of Terraform
AWS Community Day CPH - Three problems of Terraform
 

A Small Home Project-How to Caulk

  • 1. You can do it I will show you how!
  • 2. You will Need:  A tube of caulk  Caulk gun  Thin rubber gloves (optional)  Sponge if using latex caulk
  • 3. First determine which type of caulk you need:  There are two basic types of caulk
  • 4. The two types of caulk are: Latex and Silicone
  • 5. The Differences Are: Silicone Latex  Use on wood, walls & other  Use on wet surfaces (around dry surfaces sinks, faucets, tubs)   Dries fast (2 hours) Mold & mildew resistant   Can be painted Won’t shrink or crack   Can be used to patch small Use on ceramic tile, glass, holes and gaps metal, plastic & wood   Flexible but can shrink Not paintable
  • 6. Next  Be sure to follow package directions  Temperature and weather are important!  Clean area to be caulked  Remove dirt, grease and moisture  Remove old caulk
  • 7. Bead Size  The “bead” is the caulk that comes out of the tube  The size of the bead depends on the amount of caulk you need to fill the gap or hole  You can control the size of the bead by where you cut the nozzle on the tube of caulk
  • 8. Bead Size •The size of the bead depends on where you cut the nozzle. •The closer to the end the smaller the bead. •The further from the end the larger the amount of caulk.
  • 9. Loading the Caulk Gun  Push lever at end of gun and hold in place  At the same time pull metal bar back to allow room for caulk tube  You can now use nozzle (also called spout) cutter on the side of the caulk gun
  • 10. Push Lever Pull metal bar to allow room for cartridge.
  • 11. Ready to use The caulk gun is loaded and ready to go!
  • 12. Applying Caulk  Apply caulk to surface  Smooth using gloved finger  Try to avoid excess, use a small amount
  • 13. Before Note gap in corner of moulding
  • 15. Smooth it out!  Latex-use a damp sponge  Silicone use gloved finger  Be careful silicone is sticky
  • 16. Let Surface Dry  For Latex allow 2 hours to dry  For Silicone allow 24 hours to cure
  • 17. Congratulations!  By caulking your own projects you can:  Avoid costly repairs  Not have to rely on others to help you  Be empowered because you can to it yourself!
  • 18. You can do it! Give it a try!