4. Saving running-configuration to
startup-configuration:
R1#copy run start
Destination filename [startup-config]?
Building configuration...
[OK]
5. Backup running-configuration to
TFTP Server:
R1>enable
Password:
R1#co
R1#copy runn
R1#copy running-config tftp
Address or name of remote host []? 192.168.1.15
Destination filename [r1-confg]? run-config
backup
!!
965 bytes copied in 19.340 secs (50 bytes/sec)
6. Restoring running configuration
on TFTP Server to router :
R1>enable
Password:
R1#copy tftp: running-config
Address or name of remote host [192.168.1.15]?
192.168.1.15
Source filename [run-config]? run-config
Destination filename [running-config]? running-config
Accessing tftp://192.168.1.15/run-config...
Loading run-config from 192.168.1.15 (via
FastEthernet0/0): !
[OK - 965 bytes]
Slot is empty or does not support clock participate
WIC slot is empty or does not support clock participate
965 bytes copied in 10.617 secs (91 bytes/sec)