More Related Content
Similar to Oil and Gas 75 Workshop Ana Paula Brambila Sep 2012
Similar to Oil and Gas 75 Workshop Ana Paula Brambila Sep 2012 (20)
Oil and Gas 75 Workshop Ana Paula Brambila Sep 2012
- 1. Maximo
Product Overview
Maximo Oil and Gas 7.5
© 2009 IBM Corporation
- 2. Maximo Oil & Gas
Agenda
O&G - Product Overview
Installation and Dependencies
Description of O&G Main Applications
Summary of Differences from O&G and HSE
References
© 2011 IBM Corporation
- 3. Maximo Oil & Gas
IBM Maximo for Oil & Gas
IBM Maximo for Oil & Gas helps manage assets, work and safety process related to
O&G industry.
IBM Maximo for Oil & Gas provides means for O&G companies to follow best practices to
help improve the productivity and efficiency of their critical assets.
Addresses the specialized needs of the oil & gas industry such as – failure codes, asset
specifications, location details, prioritization matrix, regulatory compliance, and condition for
work.
Manages assets with a single approach.
Manages each asset’s life cycle including acquisition, work management, inventory control,
purchasing, and preventive maintenance.
© 2011 IBM Corporation
- 4. Maximo Oil & Gas
Product Overview - Integrated operations and maintenance process architecture
Enterprise Capital Engineering Geo-Based Process Document
Financials Projects Systems Systems Control Sys Management
Open, Standards Integration / Interoperability Framework
Defect Incident Service Condition Preventive
Elimination Management Request Monitoring Maintenance
Operations Change Investigations / Maintenance Asset MRO Knowledge
Control of Work Compliance
Management Management Improvements Management Management Supply Chain Management
Management Hazards/Precautio MRO Contract
Operator Log Investigations Work Prioritization Locations Regulations Solution Search
Of Change ns Management
Operating Risk Continuous Condition For MRO Persons/Competen
MOC Request Assets Bulletin Board
Procedures Matrix Improvement Work Purchasing cy
Risk After Action Inventory Lessons
Operator Tasks Job Planning Operating Policy Non Conformance
Assessments Review Management Learned
Permit / Cert Linear Asset
Loss Reporting RCFA/FMECA Work Orders Invoicing Asset List Solutions
Planning Management
Material Action
Run Log Scheduler
Inspections Tracking
Drilling and Standard
Invoicing Actions/Groups
Completions
Integrated Operations and Maintenance Spatial / Mobile / Remote Offline Applications
Integrated Operations and Maintenance Scheduling
Integrated Operations and Maintenance Reporting / Analytics
© 2011 IBM Corporation
- 5. Maximo Oil & Gas
Integrated process
© 2011 IBM Corporation
- 6. Maximo Oil & Gas
IBM Maximo for Oil & Gas Customer Update
ADCO BP
Zadco Shell
Bluewater Placid Refining
SouthWestern Energy Pearl Oil
Petroci Williams Production
OMV Flint Hills Resources
Pasadena Refining Technip
Cornhusker Burren Energy
NCRA Korea National Oil Co
Talisman Energy Applied Petroleum Resources
Centrica Storage Repsol
Alinta Taqa
PlusPetrol Williams Midstream
Sonatrach/Statoil/BP FPCC
Takreer Trilogy Energy
BG Baker Hughes
Sunoco Skangass
Gulf Drilling Petroamazonas
Pharoanic Petroleum Kuwait Oil Company
Atwood Oceanics ADWEA
CNRL Mosaic
© 2011 IBM Corporation
Note: Partial list of customers
- 7. Maximo Oil & Gas
Installation and Dependencies
Installation is carried out on top of Maximo in the same way as any other Add-On
Make sure latest cumulative hot fixes are installed including those for other Industry
Solutions to be installed.
There are no additional hardware requirements for Maximo for Oil and Gas over and
above standard Maximo requirements.
Requires Maximo Asset Management 7.5.0
Environments – fully supported on SQL Server, Oracle, DB2.
Environments – fully supported on WebSphere and WebLogic.
Environments – fully supported on same operating systems as standard Maximo.
© 2011 IBM Corporation
Note: Partial list of customers
- 8. Maximo Oil & Gas
Investigations / Improvements
Enterprise Capital Engineering Geo-Based Process Document
Financials Projects Systems Systems Control Sys Management
Open, Standards Integration / Interoperability Framework
Defect Incident Service Condition Preventive
Elimination Management Request Monitoring Maintenance
Operations Change Investigations / Maintenance Asset MRO Knowledge
Control of Work Compliance
Management Management Improvements Management Management Supply Chain Management
Management Hazards/Precautio MRO Contract
Operator Log Investigations Work Prioritization Locations Regulations Solution Search
Of Change ns Management
Operating Risk Continuous Condition For MRO Persons/Competen
MOC Request Assets Bulletin Board
Procedures Matrix Improvement Work Purchasing cy
Risk After Action Inventory Lessons
Operator Tasks Job Planning Operating Policy Non Conformance
Assessments Review Management Learned
Permit / Cert Linear Asset
Loss Reporting RCFA/FMECA Work Orders Invoicing Asset List Solutions
Planning Management
Material Action
Run Log Scheduler
Inspections Tracking
Drilling and Standard
Invoicing Actions/Groups
Completions
Integrated Operations and Maintenance Spatial / Mobile / Remote Offline Applications
Integrated Operations and Maintenance Scheduling
Integrated Operations and Maintenance Reporting / Analytics
© 2011 IBM Corporation
- 9. Maximo Oil & Gas
Incidents (Oil)
What is it?
– An application to record incidents occurring during plant operation and
maintenance
Use cases
– Failure of an isolation valve on a separator vessel causes a loss of
containment. Standard operating procedures require an Incident to be
raised and the cause of the containment incident identified
Business Value
– Improved process safety management
© 2011 IBM Corporation
- 11. Maximo Oil & Gas
Defects (Oil)
What is it?
– A defect reporting and tracking application
Use cases
– Operator notices a generator cooling system running hot at 40
degrees higher than design temperature. Is concerned that this
could impact long term reliability of the generator and raises a
defect
Business Value
– Drives enhanced maintenance and operational performance
© 2011 IBM Corporation
- 13. Maximo Oil & Gas
Investigations (Oil)
What is it?
– Supports investigations of incidents or defects
– A problem may be the result of one or many incidents
Use cases
– Could be initiated from an incident that requires further
investigation into the cause of the incident
Business value
– Improved process safety management
– A mechanism for initiating the recording of lessons learned by an
organization
© 2011 IBM Corporation
- 14. Maximo Oil & Gas
Investigations (Oil)
© 2011 IBM Corporation
- 15. Maximo Oil & Gas
Cause Analysis and FMECA
What is it?
– Extensions to the existing Investigations application to support cause
analysis and Failure Mode Effect and Criticality Analysis (FMECA)
Use Cases
– Conduct a 5 Whys root cause analysis against an investigation
– Add a FMECA to an investigation
– Document a cause and effect analysis within Maximo
Business Value
– Closely link analysis with follow up action
– Reduces need for additional specialist applications
© 2011 IBM Corporation
- 16. Maximo Oil & Gas
Cause Analysis tab
© 2011 IBM Corporation
- 17. Maximo Oil & Gas
Risk Matrices
What Is It?
– Modelling of probability and consequences of events
– Configurable by severity – Safety, environmental, asset
– Works integrated with risk assessment application
Use cases
– Models a company risk matrix to determine risk ranking
– A customer wants to drive priority of work based on probability of an event
occurring and the consequences of the event eg RBI
Business value
– Improves the accuracy and consistency of risk assessment by using pre-
built matrices
– Leads to improved risk management
© 2011 IBM Corporation
- 18. Maximo Oil & Gas
Sample Consequence record
© 2011 IBM Corporation
- 19. Maximo Oil & Gas
Control of Work
Enterprise Capital Engineering Geo-Based Process Document
Financials Projects Systems Systems Control Sys Management
Open, Standards Integration / Interoperability Framework
Defect Incident Service Condition Preventive
Elimination Management Request Monitoring Maintenance
Operations Change Investigations / Maintenance Asset MRO Knowledge
Control of Work Compliance
Management Management Improvements Management Management Supply Chain Management
Management Hazards/Precautio MRO Contract
Operator Log Investigations Work Prioritization Locations Regulations Solution Search
Of Change ns Management
Operating Risk Continuous Condition For MRO Persons/Competen
MOC Request Assets Bulletin Board
Procedures Matrix Improvement Work Purchasing cy
Risk After Action Inventory Lessons
Operator Tasks Job Planning Operating Policy Non Conformance
Assessments Review Management Learned
Permit / Cert Linear Asset
Loss Reporting RCFA/FMECA Work Orders Invoicing Asset List Solutions
Planning Management
Material Action
Run Log Scheduler
Inspections Tracking
Drilling and Standard
Invoicing Actions/Groups
Completions
Integrated Operations and Maintenance Spatial / Mobile / Remote Offline Applications
Integrated Operations and Maintenance Scheduling
Integrated Operations and Maintenance Reporting / Analytics
© 2011 IBM Corporation
- 20. Maximo Oil & Gas
Hazards (Oil)
What is it?
– Oil and gas version of Hazards that adds new fields to support
regulations, certifications and classifications
Use cases
– Identify the hazards and the precautions associated.
Business value
– Improved process safety management
© 2011 IBM Corporation
- 22. Maximo Oil & Gas
Risk Assessment
What is it?
– Provides the ability to conduct and record risk assessments
Use cases
– Job Safety Analysis
– Assess risk associated with Work Orders, Job Plans, Incidents,
Investigations, Management of Change
Business value
– Improved process safety management
– Earlier identification of risk
© 2011 IBM Corporation
- 24. Maximo Oil & Gas
Risk Assessment on job plans
© 2011 IBM Corporation
- 25. Maximo Oil & Gas
Risk Assessment on Job Plan tasks
© 2011 IBM Corporation
- 26. Maximo Oil & Gas
Risk Assessment on Work Order Tracking
© 2011 IBM Corporation
- 27. Maximo Oil & Gas
Risk Assessment on Work Order tasks
© 2011 IBM Corporation
- 28. Maximo Oil & Gas
Risk Assessment on Incidents
© 2011 IBM Corporation
- 29. Maximo Oil & Gas
Risk Assessment on Investigations
© 2011 IBM Corporation
- 30. Maximo Oil & Gas
Risk Assessment on Locations
© 2011 IBM Corporation
- 31. Maximo Oil & Gas
Prioritization Matrix
What is it?
– A matrix based system of work or risk prioritization
Use cases
– Customers need to evaluate whether work needs to be carried out within
say 24 hours, 3 days, or 1 week, based on the type of work to be
performed, function and asset or location priority criteria
– Implements the Ranking Index for Maintenance Expenditure (RIME)
method of work prioritization
Business Value
– Ensures that critical assets are given priority maintenance
– Takes the emotion out of criticality decisions
© 2011 IBM Corporation
- 32. Maximo Oil & Gas
Sample Prioritization Matrix
Reason for Work
RFW6 RFW5 RFW4 RFW3
Imminent Safety Environment Routine
Danger
Asset/Loc Matrix Matrix Matrix Matrix Matrix Matrix Matrix Matrix
Index Priority Index Priority Index Priority Index Priority
Priority
5 78 5 65 4 58 4 50 3
4 77 5 59 4 51 3 45 2
3 76 5 52 3 41 3 38 2
2 75 5 45 3 39 2 36 1
1 74 5 40 3 37 2 35 1
© 2011 IBM Corporation
- 33. Maximo Oil & Gas
Prioritization Matrix – Reason For Work tab
© 2011 IBM Corporation
- 34. Maximo Oil & Gas
Prioritization Matrix – additions to Work Orders
© 2011 IBM Corporation
- 35. Maximo Oil & Gas
Improvements
What is it?
– An application to record suggestions for improvements to plant operation
and maintenance
– Supports Six Sigma or similar methodologies
Use cases
– Could arise from a defect identified by a maintenance technician or
operator
– Could be initiated from a Problem that requires improvement action to
address the cause
Business value
– A mechanism to drive continuous improvement
© 2011 IBM Corporation
- 37. Maximo Oil & Gas
Improvements – Plans Tab
© 2011 IBM Corporation
- 38. Maximo Oil & Gas
Permit and Certificate Types
What is it?
– Provides the capability to define permit types and certificates for
use on job plans, work orders and people applications
Use cases
– Permit planning
– Personal certifications
Business value
– Ability to support planning of permits
– Improved management of competency
© 2011 IBM Corporation
- 39. Maximo Oil & Gas
Permit and Certificate Types (Oil)
© 2011 IBM Corporation
- 40. Maximo Oil & Gas
Job Plans (Oil) Control of Work sub tab
© 2011 IBM Corporation
- 41. Maximo Oil & Gas
Job Plans (Oil) Task
© 2011 IBM Corporation
- 42. Maximo Oil & Gas
Work Order Tracking (Oil)
© 2011 IBM Corporation
- 43. Maximo Oil & Gas
Operations Management
Enterprise Capital Engineering Geo-Based Process Document
Financials Projects Systems Systems Control Sys Management
Open, Standards Integration / Interoperability Framework
Defect Incident Service Condition Preventive
Elimination Management Request Monitoring Maintenance
Operations Change Investigations / Maintenance Asset MRO Knowledge
Control of Work Compliance
Management Management Improvements Management Management Supply Chain Management
Management Hazards/Precautio MRO Contract
Operator Log Investigations Work Prioritization Locations Regulations Solution Search
Of Change ns Management
Operating Risk Continuous Condition For MRO Persons/Competen
MOC Request Assets Bulletin Board
Procedures Matrix Improvement Work Purchasing cy
Risk After Action Inventory Lessons
Operator Tasks Job Planning Operating Policy Non Conformance
Assessments Review Management Learned
Permit / Cert Linear Asset
Loss Reporting RCFA/FMECA Work Orders Invoicing Asset List Solutions
Planning Management
Material Action
Run Log Scheduler
Inspections Tracking
Drilling and Standard
Invoicing Actions/Groups
Completions
Integrated Operations and Maintenance Spatial / Mobile / Remote Offline Applications
Integrated Operations and Maintenance Scheduling
Integrated Operations and Maintenance Reporting / Analytics
© 2011 IBM Corporation
- 44. Maximo Oil & Gas
Operators Log
What is it?
– An application used by shift operators to record logs
Use cases
– Use to record events associated with a shift
– Downtime and meter recording
– Tracks personnel on shift
Business value
– Improved coordination between operations and maintenance
– Enhanced organizational learning
© 2011 IBM Corporation
- 45. Maximo Oil & Gas
Operators Log - Shift Log tab and Shift Team sub tab
© 2011 IBM Corporation
- 46. Maximo Oil & Gas
Operators Log - Typical log entry
© 2011 IBM Corporation
- 47. Maximo Oil & Gas
Operators Log - Production Loss tab
© 2011 IBM Corporation
- 48. Maximo Oil & Gas
Operators Log - Create Incident
© 2011 IBM Corporation
- 49. Maximo Oil & Gas
Run Log
What is it?
– Application to provide a log for activities associated with drilling, production
wells and process plant production data.
Use Cases
– User reports an incident associated with a downhole tool
– Reporting daily production data for a well
– Reporting data associated with a production run on process plant
Business Value
– Supports integrated operations between drilling, operations and maintenance
– Leverage existing Maximo infrastructure for wells and downhole equipment
© 2011 IBM Corporation
- 51. Maximo Oil & Gas
Operating Policies
What is it?
– Application to identify operating and maintenance strategies and link these
to maintenance actions and operating procedures
Use Cases
– Set up a Performance Standard and link to assurance activities
– Use to highlight a strategy driven by reliability centered maintenance
– Identify assets maintained using risk based inspection techniques
Business Value
– Supports compliance by clearly linking strategy basis to specific
assets/locations
– Avoid the need for additional external applications to track maintenance
strategy
© 2011 IBM Corporation
- 52. Maximo Oil & Gas
Operating Policy
© 2011 IBM Corporation
- 53. Maximo Oil & Gas
Operating Policies
© 2011 IBM Corporation
- 54. Maximo Oil & Gas
Operating Procedures
What is it?
– Application to document operating procedures within Maximo and link them
to operating policy
Use Cases
– Assign an operating procedure against a task carried out by operations
– Add an operating procedure to a Job Plan task
Business Value
– Integrated procedures shared by maintenance and operations
– Improved procedural compliance
© 2011 IBM Corporation
- 55. Maximo Oil & Gas
Operating Procedures
© 2011 IBM Corporation
- 56. Maximo Oil & Gas
Operating procedure lines
© 2011 IBM Corporation
- 57. Maximo Oil & Gas
Operator Tasks
What is it?
– An application to support and view operator maintenance tasks
Use Cases
– Add operator driven tasks
Business Value
– Simplifies operator access to maintenance tasks allocated to operations
© 2011 IBM Corporation
- 58. Maximo Oil & Gas
Operator Tasks (Oil)
© 2011 IBM Corporation
- 59. Maximo Oil & Gas
Drilling and Completion
What is it?
– Application to support work associated with drilling and completing a well
Use Cases
– Use to set up all drilling activities associated with a well
– Construction and completion activities associated with a well
– In conjunction with Maximo Scheduler, show a Gantt chart of drilling
schedule
Business Value
– Supports integrated operations between drilling, operations and
maintenance
– Use of Maximo existing infrastructure for wells and downhole equipment
© 2011 IBM Corporation
- 60. Maximo Oil & Gas
Drilling and Completion main tab
© 2011 IBM Corporation
- 61. Maximo Oil & Gas
Support for IS014224 (2006)/API 689
What is it?
– Updates existing Failure Codes and Asset Specification applications with
ISO14224/API 689 data
Use cases
– Customer already using ISO14224 (1999) wants to start using latest
ISO14224 (2006) data
– New customer wants to utilise latest international standard for failure
reporting
Business value
– More consistent failure reporting
– Improved availability of plant
© 2011 IBM Corporation
- 62. Maximo Oil & Gas
Organizations (Oil)
© 2011 IBM Corporation
- 63. Maximo Oil & Gas
Failure Codes
What is it?
– Contains the ISO 14224 (API 689) failure classes, problem, cause and
remedy tables for each equipment type listed in the standard
Use Cases
– New oil and gas customer does not have standard failure classes and
problem, cause, remedy structure. Wishes to use international standards
– Existing customer not using MAXIMO failure reporting capability and wishing
to do so.
Business Value
– Time take to gather and load failure classes, problems, causes and
remedies would be significantly greater than cost of solution
– Without standardized failure data, cannot implement reliability analysis
© 2011 IBM Corporation
- 64. Maximo Oil & Gas
Sample ISO14224/API689 Failure Codes
© 2011 IBM Corporation
- 65. Maximo Oil & Gas
Asset Specifications
What is it?
– Contains the ISO 14224 (API 689) Equipment Unit Subdivision and
Equipment Unit specific data tables for every equipment type listed in the
standard
Use cases
– New Oil and gas customer does not have standard asset specification
templates for locations or equipment. Wishes to use international standards
– Existing customer not using MAXIMO asset catalog capability and wishing to
do so with an industry standard methodology
Business Value
– Time take to gather and load asset specifications would be significantly
greater than cost of solution
– Standardized asset specifications facilitate comparisons of equipment
performance
© 2011 IBM Corporation
- 66. Maximo Oil & Gas
Change Management
Enterprise Capital Engineering Geo-Based Process Document
Financials Projects Systems Systems Control Sys Management
Open, Standards Integration / Interoperability Framework
Defect Incident Service Condition Preventive
Elimination Management Request Monitoring Maintenance
Operations Change Investigations / Maintenance Asset MRO Knowledge
Control of Work Compliance
Management Management Improvements Management Management Supply Chain Management
Management Hazards/Precautio MRO Contract
Operator Log Investigations Work Prioritization Locations Regulations Solution Search
Of Change ns Management
Operating Risk Continuous Condition For MRO Persons/Competen
MOC Request Assets Bulletin Board
Procedures Matrix Improvement Work Purchasing cy
Risk After Action Inventory Lessons
Operator Tasks Job Planning Operating Policy Non Conformance
Assessments Review Management Learned
Permit / Cert Linear Asset
Loss Reporting RCFA/FMECA Work Orders Invoicing Asset List Solutions
Planning Management
Material Action
Run Log Scheduler
Inspections Tracking
Drilling and Standard
Invoicing Actions/Groups
Completions
Integrated Operations and Maintenance Spatial / Mobile / Remote Offline Applications
Integrated Operations and Maintenance Scheduling
Integrated Operations and Maintenance Reporting / Analytics
© 2011 IBM Corporation
- 67. Maximo Oil & Gas
Management of Change
What Is It?
– An application to support management of changes process cycle, from
request to closure
Use cases
– Management of engineering and plant change requests
– Management of change associated with deferred work
Business value
– Greater process conformity through integration with work management
process
– Improves communication between operations and maintenance
© 2011 IBM Corporation
- 68. Maximo Oil & Gas
Full Cycle MOC
MOC Details
Risks and Projects
Review
Approve
Pre-MOC actions
Authorize
Post-MOC actions
Closure
© 2011 IBM Corporation
- 69. Maximo Oil & Gas
Management of Change Request screenshot
© 2011 IBM Corporation
- 70. Maximo Oil & Gas
Management of Change – Main tab
© 2011 IBM Corporation
- 71. Maximo Oil & Gas
Management of Change – Risk and Project
© 2011 IBM Corporation
- 72. Maximo Oil & Gas
Management of Change – Review and Approval
© 2011 IBM Corporation
- 73. Maximo Oil & Gas
Management of Change – Pre Start
© 2011 IBM Corporation
- 74. Maximo Oil & Gas
Management of Change - Authorize
© 2011 IBM Corporation
- 75. Maximo Oil & Gas
Management of Change – Post-Start
© 2011 IBM Corporation
- 76. Maximo Oil & Gas
Management of Change – Closure
© 2011 IBM Corporation
- 77. Maximo Oil & Gas
Compliance
Enterprise Capital Engineering Geo-Based Process Document
Financials Projects Systems Systems Control Sys Management
Open, Standards Integration / Interoperability Framework
Defect Incident Service Condition Preventive
Elimination Management Request Monitoring Maintenance
Operations Change Investigations / Maintenance Asset MRO Knowledge
Control of Work Compliance
Management Management Improvements Management Management Supply Chain Management
Management Hazards/Precautio MRO Contract
Operator Log Investigations Work Prioritization Locations Regulations Solution Search
Of Change ns Management
Operating Risk Continuous Condition For MRO Persons/Competen
MOC Request Assets Bulletin Board
Procedures Matrix Improvement Work Purchasing cy
Risk After Action Inventory Lessons
Operator Tasks Job Planning Operating Policy Non Conformance
Assessments Review Management Learned
Permit / Cert Linear Asset
Loss Reporting RCFA/FMECA Work Orders Invoicing Asset List Solutions
Planning Management
Material Action
Run Log Scheduler
Inspections Tracking
Drilling and Standard
Invoicing Actions/Groups
Completions
Integrated Operations and Maintenance Spatial / Mobile / Remote Offline Applications
Integrated Operations and Maintenance Scheduling
Integrated Operations and Maintenance Reporting / Analytics
© 2011 IBM Corporation
- 78. Maximo Oil & Gas
Action Tracking
What is it?
– A way of following up Actions arising from Investigations or Improvements
– A means of tracking Actions agreed with regulatory authorities or internal
review teams
Use cases
– A HSE audit is carried out on an offshore oil platform. As a result of this
audit a number of actions are required to maintain the platforms license to
operate. These actions must be tracked and reported on within a specified
time period
– A Safety Notification is received which requires completion of a survey and
review of all balanced bellows pressure relief valves by a specified date
Business Value
– Drives implementation of business critical actions
© 2011 IBM Corporation
- 80. Maximo Oil & Gas
Standard Actions
What Is It?
– An application to manage standard actions that can be associated with
management of change processes and standard checklists
Use cases
– Create pre and post MOC type actions that can be listed in the
Management of Change application
– Use to create standard checklists that can be associated with work carried
out in Maximo
Business value
– Provides greater process conformity through use of standard actions and
checklists
© 2011 IBM Corporation
- 81. Maximo Oil & Gas
Standard Actions
© 2011 IBM Corporation
- 82. Maximo Oil & Gas
Regulatory Compliance
What is it?
– Provides ability to hold details of regulations relevant to work carried out
in Maximo, and relate these regulations to both work planned in Maximo
and actual work carried out
Use cases
– Provide documented proof that work carried out in Maximo was
completed based on the required regulation
– Provides the ability to demonstrate compliance with many statutory
requirements covering safety, health and environment
Business Value
– Identifies compliance with relevant regulations
– Simplifies work required to demonstrate compliance
© 2011 IBM Corporation
- 83. Maximo Oil & Gas
Regulatory Compliance main tab
© 2011 IBM Corporation
- 84. Maximo Oil & Gas
Regulatory Compliance tab on Locations
© 2011 IBM Corporation
- 85. Maximo Oil & Gas
Regulatory Compliance tab on Work Orders
© 2011 IBM Corporation
- 86. Maximo Oil & Gas
Regulatory Compliance - ‘Where Used’ tab
© 2011 IBM Corporation
- 87. Maximo Oil & Gas
Condition for Work
What is it?
– Establish the conditions necessary before work can commence e.g. plant
shutdown, train shutdown, unit shutdown, isolated, depressurized,….
Use cases
– A common element of the work planning process in downstream and
offshore oil and gas
Business Value
– Supports planning of work associated with common plant
– Facilitates opportunity maintenance
© 2011 IBM Corporation
- 88. Maximo Oil & Gas
Condition for Work main tab
© 2011 IBM Corporation
- 89. Maximo Oil & Gas
Condition For Work field on Job Plans
© 2011 IBM Corporation
- 90. IBM - Maximo Health, Safety and Environment Manager
Maximo HSE Manager
© 2009 IBM Corporation
- 91. Summary of Differences from Oil and Gas 7.5.0 to HSE Manager 7.5.0
Drilling and Completion application removed
Run Log application removed
ISO14224 Failure Code and Asset Specification loading dialogs removed from Organizations (HSE)
List Tab
ISO14224 Taxonomy section removed from Locations (HSE) Operating Context tab
All references to (Oil) changed to (HSE) on application screens and menus
September 13, © 2009 IBM Corporation
2012
- 92. References
Information center is at:
http://publib.boulder.ibm.com/infocenter/tivihelp/v49r1/topic/com.ibm.hse.doc/welcome.html
– The Welcome page contains links to the Installation Guide to the Quick Start Guide, and to
application help.
– The Reference section of the Information Center contains detailed information on integration error
messages.
From Maximo on IBM.com:
– http://www.ibm.com/software/tivoli/products/maximo-health-safety-environment
– Click Product documentation
September 13, © 2009 IBM Corporation
2012