With the fact that society economy promptness develops the ceaseless rise composing in reply the people living standard. This slide demonstrate the manufacturing process of plastic car trims. Visit our Car Trims: http://www.automotive-mould.com/side-trim-mould.html
2. Auto Mould
With the fact that society economy promptness
develops the ceaseless rise composing in reply
the people living standard. Demand of human to
the car quantity and quality is higher and this also
means that the demand of automotive
components will increase significantly.
3. Importance of Plastic Part
The plastic part is also very important for
constituting a car, a fine car must have a high
quality plastic parts.
According to this situation, Sino Automotive
Mould Co. LTD, which is one subsidiary of Sino
Holdings Group, spent a lot of investment and
energy in automotive parts mould development
and production and on November
1, 2010, passed the quality certification
ISO/TS19649 (AQA) international Co., LTD.
4. Auto Parts Production
Auto parts production quality management
system, aims to become a world-class automotive
mould supplier. Sino-auto used to provide plastic
parts mold to
Volkswagen, BMW, Audi, Honda, Toyota, etc.
5. Parts of Automotive Mould
Automotive mould in general can be divided into
three parts:
Inner trim mould (panel sets mould, air system
mould, controlling system mould)
Exterior trim mould (auto bumper mould, grille
mould, shock absorber mould) and
Lighting system mould (front lamp, rear
lamp, frog lamp)
So the car trim part is nearly taking up most of the whole car plastic parts.
6. Now I want to show some detailed information
about the car trim mould making in Sino-auto.
8. Car trim products and mould
design
As we all know, the design process of car trim is more
complicated than the general plastic mould because of the high
precise matching requirements. So when we got the plastic 3D
model from our clients.
we will conduct a meeting with all the related officers will be
discussing about the 3D design shortcoming to find out if there
are any places have the tooling problem exists.
For example: Demoulding angle, part strength, plastic
filling, deforming, thickness, texture. If there have any questions
or problems,
we will contact to our customer. We will also have a technical
meeting that all the technical points will be mentioned out, such
as the mould steel, plastic material, mould basic structure and its'
MFI, customer's injection machine's parameters, customer's
special requirements and the components machining process.
The Auto Mould design QC department will start the inspection
after the automotive mould design ready.
10. Car trim mould molding process
During the machining, we need to check the steel
hardness and also do all quality controlling.
We build two or three stages machining. The first
stage is rough machining, some time we make
half accurate machining.
The ultimate level is accurate high-speed mincing
or machining. After each machining process, we
have CMM measuring instruments for cavities /
cores and checking of other component’s
dimension. If the sizing satisfies the tolerance
then only we will take it to our assembling shop
otherwise, we will act re-machining immediately.
12. Car trim mould testing process
We have QC engineers control the quality points
when the mould would be assembling. Before the
mould T1, the Mould will be disassembled for
QC, and Sino-auto has the T1 standard. If the
mould doesn’t meet the standard, we can’t make
any mould testing.
Sino-auto has more than 15 sets of different size
of machine which are specially for mould testing.
Our operation team has rich experience; this
team's task is to find the moulds shortcoming and
what should be the improvement. After the T1
improvement, we will make mass simulation.
13. If you are looking for the Cooperation partner of
automotive mould, please kindly come to us for
further detailed discussion, we are sure you will
be satisfied.
14. Thanks
Sino Auto
www.automotive-mould.com