Control Laser Beam Size & Shape with X-Y Theta Module
1. X, Y Theta Motorized Aperture
Commercial Laser Modules
The X-Y, Theta Aperure Module is a
motorized device that is designed to control
laser beam size and shape for applcations
that require precise patterning. The module
provides independent control of the X, Y and
Theta parameters allowing beams of any
aspect ratio and orientation to be generated. Quantum Composers, Inc.
P.O. Box 4248 Bozeman, MT 59772
An interal calibration and anti-backlash
Phone (406) 582-0227
function simplifies setup and calibration.
Fax (406) 582-0237
Toll Free (800) 510-6530
www.QuantumComposers.com
sales@quantumcomposers.com
2. SPECIFICATIONS Motorized Aperture Module
INPUT
beam height 60 mm (other configurations upon request)
fluence 10 J/cm2 max
diameter 3.6 mm min*
*(to utilize maximum slit opening the beam must fill the slit)
OUTPUT
X, Y
range 0 – 2.5 mm
resolution 1.0 % (0.25 um resolution with a 100x objective)
accuracy +/- (25 um + .01 * position)
speed < 1.0 s full range of travel
Theta
range +/– 45 degrees from horizontal
resolution 1.1 % ( .50 degrees)
accuracy +/- (1 degree + .01*theta)
speed < 1.0 s full range of travel
CONTROLLER
comm RS232, w/ bypass output which allows multiple units to be daisy
chained on the same serial port.
baud rate 57,600 (other speeds available on request)
tact time < 1 s, full range motion, for all three parameters
Toll Free Phone (800) 510-6530 Email Sales@QuantumComposers.com
Fax Phone Line (406) 582-0237 Web www.QuantumComposers.com V1.0 11/4/11