Rope and beads are always the supplies for jewelry making. Handmade bracelets can be very beautiful. This handmade bracelet tutorial will show you bracelet knots instructions.
Ride the Storm: Navigating Through Unstable Periods / Katerina Rudko (Belka G...
Bracelet knotting instructions
1. Handmade bracelets –bracelet knotting instructions
Handmade bracelets are a great money saver and so
many possibilities exist if you use your imagination to
create them. You can make them easily with these
specific bracelet knotting instructions. Follow these
steps to make one yourself!
Materials and tools:
14mm, 12mm and 10mm agate bead
Thread and cord
Scissors
Instructions:
Step 1: Slide beads and tie knots.
1st
, slide a 14mm agate bead onto the brown thread.
Position the bead in the middle of the thread.
2nd
, put the two threads together side by side and
tie a knot on the side of the bead.
3rd
, tie a second knot with the two cords on the
other side of the 14mm agate bead to keep it in
place.
4th
, slide a 12mm agate bead onto the beige thread
and then tie a knot with both cords as in the
previous step.
Rope and beads are always the supplies for jewelry making. Handmade bracelets can be very beautiful.
This handmade bracelet tutorial will show you bracelet knots instructions.
2. This handmade bracelet is very beautiful! Follow the above bracelet knotting instructions to make
it. Then, you can send it to your friends or mother as a gift.
For more creative and funny handmade jewelry ideas please click:
http://www.pandahall.com/learning-center.html
Step 2: Continue inserting beads
and making knots.
1st
, slide the remaining beads and tie knots
after each one alternating on which cord your
put the bead on.
2nd
, you should get something similar as the
image below.
Step 3: Tie sliding knots.
1st
, make a loop with the brown cord and
insert the beige cord through the loop.
2nd
, continue by wrapping the brown cord
around the beige cord one more time. You
should have two coils around the beige cord.
3rd
, pass the brown cord end back through the
two loops.
4th
, pull the end tightly to create the sliding
knot.