Frank Altenburg

Frank Altenburg's updates Load more

• 
  Frank Altenburg commented on IBM Sametime 8.5.2 Installation - From Zero To Hero - Basics - 21.12.2011

  • Following
  • Follow Frank ·
  • Favorite Favorited ·
  • Comment ·
  • 8 months ago

  

  Michel, no, use 2 IP addresses for his box. Because you have 2 components who want to listen on port 80 HTTP ( the Meeting Server on address meeting.renovations.com and IP 192.168.30.10 and the Sametime Proxy Server on the address webchat.renovations.com and IP 192.168.30.30) If you use one IP for all then you need different ports.
• 
  Frank Altenburg commented on IBM Sametime 8.5.2 Installation - From Zero To Hero - Basics - 21.12.2011

  • Following
  • Follow Frank ·
  • Favorite Favorited ·
  • Comment ·
  • 9 months ago

  

  !!! DO NOT COPY and PAST the commands for wasservice from the PDF document into your CMD line window. This fails because of some additional characters for CR/LF in the PDF. you can copy this commands into a notepad windows, and replace the CR/LF. Then it should work.
• 
  Frank Altenburg commented on IBM Sametime 8.5.2 Installation - From Zero To Hero - Basics - 21.12.2011

  • Following
  • Follow Frank ·
  • Favorite Favorited ·
  • Comment ·
  • 9 months ago

  

  Errors in the doc? Tell me where, please. Mail me to frank.altenburg@de.ibm.com
• 
  Frank Altenburg commented on IBM Sametime 8.5.2 Installation - From Zero To Hero - Basics - 21.12.2011

  • Following
  • Follow Frank ·
  • Favorite Favorited ·
  • Comment ·
  • 9 months ago

  

  The PlugIn is installed in the proxy server in a default path. It is not required to configure this path in the Sametime Proxy Configuration.
• 
  Frank Altenburg favorited IBM Sametime 8.5.2 Installation - From Zero To Hero - Basics - 21.12.2011

  • Following
  • Follow Frank ·
  • Favorite Favorited ·
  • Comment ·
  • 10 months ago

  
• 
  Frank Altenburg commented on Sametime 8.5.1 from zero to hero - next generation

  • Following
  • Follow Frank ·
  • Favorite Favorited ·
  • Comment ·
  • 1 year ago

  

  No i would not recommend to install all components on one single box. Reason is that 3 components want to bind to Port 80. The Community Server, the Meeting Server and the Sametime proxy Server. Working with 3 IP addresses is possible but not easy to configure. It requires a lot of manual configuration steps in the ISC of the particular server to bind just to one IP address. Another oiption is to have one box with 8GB RAM and 4CPU. then use a 64Bit OS like Windows 2008. then install VMware Server and 3 Virtual Maschines using Windows 2003 or 2008 (32Bit Mode is possible here) then you can have the full Zero to Hero pilot on one box.
•