Artisan Cellular Window Shades with Simple Fit Installation by Redi Shade Specification Guide

1. How to Measure
Page 1
How to Install
Page 2
Shade Options
Page 3
Benefits
Product Warranty & Guarantee
Page 4
Fabric Color Chart
Page 5
Head Rail Color Chart
Cleaning Guide
Page 6
855-529-7107
ArtisanCellular@redishade.com
Artisan Cellular Shades with
Simple FitTM
Specification Guide

2. Inside Mount Installation
Width:
Measure the inside window frame at the top of the window.
Height:
Measure the inside window frame at the middle of the
window.
Record these measurements rounding down to the nearest 1
/8
”.
Ex: 36 3
/16
” will round down to an exact measurement of 36 1
/8
”.
Note: Do not factor in any clearance deductions; the factory will make the
necessary deduction for your shade to fit properly.
Outside Mount Installation
Width:
Measure the outside of the window frame.
Height:
Measure the outside of the window frame.
We recommend adding 3” to these measurements
(1 1
/2
” each side), so the shade overlaps the window
frame for full light control.
Note: Your recorded measurement will be used – no deductions
or additions will be made for Outside Mount.
How to Measure
Page 1
Simple FitTM
Installation is available with Inside Mount only. Outside Mount is available upon
request.
Please follow our recommendations below and don’t be afraid to call us (855-529-7107) should you
have questions or need assistance.
Inside Mount Window Depth
Minimum mounting depth: 1 1
/2
”
Head rail protrudes 1
/4
”
Flush mount depth: 2”
Rail Dimensions Height Depth
Head Rail 1 1
/2
” 1 3
/4
”
Bottom Rail 1 1
/2
” 1 5
/8
”
Using a metal measuring tape, measure each window individually (It’s common for
window frame measurements to have slight differences, even in the same room).
Head Rail Dimensions

3. Simple FitTM
Installation
Peel the adhesive liner from each mounting
plate. Place the Fixed End mount (left side)
of the shade in the desired location. Raise
the Trigger End (right side) into position.
In addition to instructions and bottom rail handle,
Simple FitTM
Installation shades include an accessory
bag containing two additional mounting plates with
pre-applied adhesive and one Simple FitTM
Spacer.
How to Install
Press Trigger inward (toward window
glass) to engage the Simple Fit™ system,
locking the shade into place.
What’s Included
Page 2

4. Standard Bottom Up
Open from the bottom to adjust light control and
privacy. Simple Fit™ Installation Method allows you
to place your shade at the top or middle inside your
window.
Top Down Bottom Up (TDBU)
Floating middle and bottom rails allow you to open
from the top or bottom, increasing street-level
privacy while allowing for plenty of natural light.
Day-Night
Like having two shades in your window. The top
Glare Reducing or Light Filtering fabric allow for
flowing light with low to moderate privacy. The
bottom Room Darkening fabric provides maximum
light control and privacy.
Shade Options
Outside Mount Brackets
Outside mounted shades do not use the Simple FitTM
Installation
Method. Outside Mount brackets will be required. See Figure A.
Dimensions: 1 3
/4
” L x 1 3
/4
” W
Extension Brackets
Extension brackets are available for Outside Mount brackets.
These brackets may be needed when the shade needs to
operate around an obstruction. See Figure B.
Dimensions: 4 1
/4
” L x 1 1
/8
” W
Hold Down Brackets
Hold Down brackets are available for securing the bottom
rail in place. See Figure C.
Dimensions: 1 1
/4
” L x 1
/2
” W
Shade Type 36” 48” 60” 72” 82”
Standard: Single Cell 2 3
/4
” 3” 3 1
/4
” 3 1
/2
” 3 3
/4
”
Standard: Double Cell 3 3
/16
” 3 9
/16
” 4” 4 3
/8
” 4 3
/4
”
Standard: Room Darkening 2 1
/2
” 2 3
/4
” 3” 3 1
/8
” 3 5
/16
”
TDBU: Single Cell 3 1
/2
” 3 3
/4
” 4” 4 5
/16
” n/a
TDBU: Double Cell 4” 4 5
/16
” 4 1
/16
” 5 1
/8
” n/a
TDBU: Room Darkening 3 5
/16
” 3 1
/2
” 3 11
/16
” 3 7
/8
” n/a
Day-Night: Single Cell/Room Darkening 5 7
/8
” 6 3
/8
” 6 13
/16
” 7 5
/16
” n/a
Day-Night: Double Cell/Room Darkening 5 11
/16
” 6 5
/16
” 7” 7 1
/2
” n/a
Special Brackets for Outside Mount Only
Shade Stacking Chart
Page 3
Available Sizes Minimum Maximum
Width 19” 72”
Height 10” 82”
Available Sizes Minimum Maximum
Width 19” 72”
Height 10” 72”
Available Sizes Minimum Maximum
Width 19” 72”
Height 10” 72”
Always CordlessTM
Artisan Cellular Shades include cordless operation as a standard feature.
Note: Stack size may vary based on fabric selection.
Fig. A
Fig. CFig. B

5. Benefits
Always CordlessTM
Artisan Cellular Shades include cordless operation as a standard feature.
Energy Efficiency
R-Value
The insulating power of cellular shades helps
keep your room warmer in the winter and cooler
in the summer. Saving energy.
Keep rooms warmer
During the winter months, the insulating
properties of honeycomb cellular shades help
to block out the cold keeping rooms warmer.
Keep rooms cooler
During the summer months, the insulating
properties of room darkening cellular shades
help to block heat and harsh sun keeping rooms
cooler.
Warranty
If your Artisan Cellular Shade fails to perform properly due to poor workmanship or defect, we will
repair or replace it free of charge.
For exchanges, refunds, or warranty service, please contact us at 855-529-7107.
Visit www.redishade.com for complete details.
100% Satisfaction Guaranteed
If you’re not satisfied with your Artisan Cellular Shade purchase, please contact us
within 30 days of delivery. If we can’t make things right, we’ll help you with an
exchange or refund.
Page 4
Sun Protection
UV Protection
Cellular shades effectively block ultraviolet (UV)
rays. Exposure to the sun’s UV rays can damage
furnishings, wood floors, draperies, carpeting and
artwork.
Material R-Value
Translucent 0.7
Woven 0.7
Textured 3.4
Single Cell 3.5
Linen 3.5
Double Cell 3.6
Room Darkening 4.3
Blocking UV Rays Percent
Translucent 93%
Woven 96%
Textured 97%
Single Cell 97%
Linen 97%
Double Cell 98%
Room Darkening 99%

6. Color Single Cell Double Cell
Room
Darkening
Translucent Woven Textured Linen
Head Rail
Color
Aegean PLS310-094 n/a n/a n/a n/a n/a n/a Silver
Almond PLS310-009 PLX3A0-009 PLS320-009 n/a n/a n/a n/a Khaki
Aqua PLS310-022 PLX3A0-022 n/a n/a n/a n/a n/a White
Ash PLS310-346 n/a PLS320-346 n/a n/a n/a n/a Black
Auburn PLS310-018 PLX3A0-018 n/a n/a n/a n/a n/a Sangria
Bisque PLS310-007 PLX3A0-007 n/a n/a n/a n/a n/a Fawn
Cadet Gray PLS310-484 n/a n/a n/a n/a n/a n/a Ocean
Camel n/a n/a n/a n/a n/a n/a PLS331-032 Fawn
Charcoal PLS310-030 n/a n/a n/a n/a n/a n/a Black
Chardonnay PLS310-003 PLX3A0-003 PLS320-003 n/a n/a n/a n/a Fawn
Cherry
Blossom
PLS310-016 PLX3A0-016 n/a n/a n/a n/a n/a Rose
Cool Gray PLS310-365 n/a n/a n/a n/a n/a n/a Silver
Cornsilk PLS310-005 PLX3A0-005 n/a n/a n/a n/a n/a Fawn
Dark
Chocolate
PLS310-326 PLX3A0-326 PLS320-326 n/a PLS37A-326 n/a n/a Dark
Chocolate
Denim PLS310-024 PLX3A0-024 PLS320-024 n/a n/a n/a n/a Slate
Earl Gray PLS310-483 n/a n/a n/a n/a n/a n/a Mint
Ghost White PLS310-070 PLX3A0-070 PLS320-070 n/a n/a PLC310-070 n/a Beige
Golden Rod PLS310-010 PLX3A0-010 n/a n/a n/a n/a n/a Khaki
Honeydew PLS310-013 PLX3A0-013 n/a n/a n/a n/a n/a Mint
Khaki PLS310-008 PLX3A0-008 PLS320-008 n/a n/a n/a n/a Khaki
Lavender PLS310-026 PLX3A0-026 n/a n/a n/a n/a n/a Lavender
Light Gray n/a n/a n/a n/a n/a n/a PLS331-034 Silver
Linen PLS310-004 PLX3A0-004 PLS320-004 PLS360-004 PLS37A-004 n/a n/a Fawn
Mango PLS310-100 n/a n/a n/a n/a n/a n/a Tan
Midnight PLS310-025 PLX3A0-025 PLS320-025 n/a PLS37A-004 n/a n/a Black
Mint PLS310-014 PLX3A0-014 n/a n/a n/a n/a n/a Mint
Mist PLS310-069 PLX3A0-069 PLS320-069 n/a n/a PLC310-069 n/a White
Mocha PLS310-012 PLX3A0-012 PLS320-012 PLS360-012 PLS37A-012 PLC310-012 PLS331-012 Mocha
Moss PLS310-015 PLX3A0-015 PLS320-015 n/a n/a n/a n/a Moss
Pepper PLS310-470 n/a PLS320-470 n/a n/a n/a n/a Black
Peru PLS310-011 PLX3A0-011 n/a n/a n/a n/a n/a Peru
Poppy PLS310-485 n/a n/a n/a n/a n/a n/a Beige
Sand PLS310-482 n/a n/a n/a n/a n/a n/a Beige
Sangria PLS310-019 PLX3A0-019 n/a n/a n/a n/a n/a Sangria
SeaShell PLS310-002 PLX3A0-002 PLS320-002 PLS360-002 n/a n/a n/a Beige
Slate PLS310-023 PLX3A0-023 n/a n/a n/a n/a n/a Slate
Smoke PLS310-021 PLX3A0-021 PLS320-021 n/a n/a n/a n/a Silver
Snow PLS310-001 PLX3A0-001 PLS320-001 PLS360-001 PLS37A-001 PLC310-001 n/a White
Wheat PLS310-006 PLX3A0-006 PLS320-006 PLS360-006 n/a PLC310-006 PLS331-006 Fawn
Zinfandel PLS310-020 PLX3A0-020 PLS320-020 n/a n/a n/a n/a Zinfandel
Color Chart
Color variation: For best consistency in the color match of your shades, we recommend ordering all the
shades for a single room at the same time, as color lot variations may occur between orders. We cannot
guarantee color lot match between orders. Note: Variation in color lots is within industry standards.
Artisan Cellular Shades are white to street side.
Page 5
Order FREE swatches at artisanswatches.com

7. Head Rail Color Chart
See chart below for corresponding head rail colors.
Cleaning Recommendation
Dusting
To maintain the fresh appearance of your shade, with a light touch, dust regularly with a
feather duster.
Vacuuming
Use a vacuum attachment for a deeper clean, being careful not to press too hard as to
crease the fabric.
Spot Cleaning
Use warm water, mild detergent, and a non-abrasive cloth. Dab lightly or gently rub back
and forth in the direction of the fabric pleats. Pat dry to remove excess water and leave the
shade fully closed until completely dry.
Warning: Dry cleaning, full immersion in water, strong detergents, or spot cleaners are not
recommended.
Page 6
White
Khaki
FawnBeige
Moss
Peru
Mint
Tan
Sangria ZinfandelRose
Slate Black
Ocean Dark
Chocolate
Silver
Lavender
Mocha