SlideShare a Scribd company logo
1 of 27
Download to read offline
Service Repair Manual
Models
EL240B EXCAVATOR
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: EL240B EXCAVATOR 5WG
Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01929226
Engine Oil Cooler - Remove
SMCS - 1378-011
Removal Procedure
Start By:
a. Remove the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter
Base - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
1/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Dispose of all fluids according to local regulations and mandates.
Note: For information on the reusability of the engine oil cooler, refer to Guideline For Reusable
Parts And Salvage Operations, SEBF8077, "Engine Oil Coolers".
Illustration 1 g00677082
1. Remove engine oil cooler (1) and the gasket.
Illustration 2 g00677084
2. Remove O-ring seals (2).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:22:36 UTC+0800 2019
2/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: EL240B EXCAVATOR 5WG
Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01929231
Engine Oil Cooler - Install
SMCS - 1378-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: For information on the reusability of the engine oil cooler, refer to Guideline For Reusable
Parts And Salvage Operations, SEBF8077, "Engine Oil Coolers".
Illustration 1 g00677084
1/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1. Install new O-ring seals (2).
Illustration 2 g00677107
2. Install new gasket (3) on the engine oil cooler (1).
Illustration 3 g00677082
Note: Installation can be simplified by the use of guide bolts.
3. Install the gasket and engine oil cooler (1).
End By:
a. Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter
Base - Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:23:32 UTC+0800 2019
2/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: EL240B EXCAVATOR 5WG
Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01929340
Engine Oil Pump - Remove
SMCS - 1304-011
Removal Procedure
Start By:
a. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
1/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Dispose of all fluids according to local regulations and mandates.
Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable
Parts And Salvage Operations, SEBF8167, "Reconditioning Procedures 3114 and 3116 Engines".
Illustration 1 g00894501
1. Remove bolts (1) and bolt (2).
2. Remove engine oil pump (3).
3. Remove the O-ring seal that is located between the cylinder block and the outlet elbow.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:24:28 UTC+0800 2019
2/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: EL240B EXCAVATOR 5WG
Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01944046
Engine Oil Pump - Disassemble
SMCS - 1304-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
B 1P-2320 Combination Puller 1
Start By:
a. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
1/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable
Parts And Salvage Operations, SEBF8167, "Reconditioning Procedures 3114 and 3116 Engines".
Illustration 1 g00614664
1. Remove the bolts from tube assembly for the pickup of oil (2), and the gasket from the
engine oil pump. Remove the bolt and outlet elbow (1) from the engine oil pump.
Illustration 2 g00614677
2. Remove bolt (3), washer (4), and idler gear (5) from the engine oil pump.
2/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3 g00614683
3. Use Tooling (A) and a suitable press in order to remove the bearing from idler gear (5).
4. Remove shaft (6) of engine oil pump from oil pump body assembly (7).
5. Use Tooling (B) to remove drive gear (8).
Illustration 4 g00614689
6. Remove bolts (10). Separate oil pump body (9) from oil pump body assembly (7).
Illustration 5 g00614694
3/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
NOTICE
Before removing the drive shaft from the pump housing, be sure that
no burrs exist on the drive shaft. If the drive shaft has burrs on it, the
bores in the pump housing may be scratched.
7. Remove shaft assembly (11) and shaft assembly (12) from oil pump body (9).
Illustration 6 g00824021
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
8. Remove the following items from oil pump body assembly (7): the bolt and the washer,
spring (14) and oil pressure relief plunger (13)
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:25:24 UTC+0800 2019
4/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: EL240B EXCAVATOR 5WG
Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01944064
Engine Oil Pump - Assemble
SMCS - 1304-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable
Parts And Salvage Operations, SEBF8167, "Reconditioning Procedures 3114 and 3116 Engines".
1. Ensure that all of the parts of the engine oil pump are thoroughly clean prior to assembly.
Note: Lubricate all internal parts of the engine oil pump with clean engine oil.
1/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g00824021
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
2. Install oil pressure relief plunger (13) and spring (14) in oil pump body assembly (7). Install
the washer and the bolt.
Illustration 2 g00614694
2/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3 g00614689
3. Install shaft assembly (12) in oil pump body (9).
4. Install shaft assembly (11) in oil pump body (9).
5. Position oil pump body (9) on oil pump body assembly (7) and install bolts (10).
Illustration 4 g00614683
6. Press drive gear (8) on shaft assembly (11) until drive gear (8) is flush with the end of shaft
assembly (11).
7. Install oil pump shaft (6). Install the bearing in idler gear (5) with Tooling (A). Install the
bearing so the distance between the hub bolt face of idler gear (5) and the bearing is
0.75 ± 0.25 mm (0.030 ± 0.010 inch).
3/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 5 g00614677
8. Install idler gear (5) on oil pump shaft (6). Install washer (4) and bolt (3). Tighten bolt (3) to
70 ± 15 N·m (52 ± 11 lb ft).
Illustration 6 g00614664
9. Check the condition of the gasket that is used in tube assembly for the pickup of oil (2). If
the gasket is damaged, replace the gasket. Install the gasket and tube assembly for the
pickup of oil (2).
10. Check the condition of the O-ring seal that is used in outlet elbow (1). If the O-ring seal is
damaged, replace the O-ring seal. Install the O-ring seal and outlet elbow (1).
End By:
a. Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:26:19 UTC+0800 2019
4/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: EL240B EXCAVATOR 5WG
Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01981031
Engine Oil Pump - Install
SMCS - 1304-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Ensure that the mounting surfaces for the engine oil pump are thoroughly clean.
1/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g01029320
1. Install the O-ring seal. Position engine oil pump (3) on the cylinder block.
2. Install bolts (1) and bolt (2).
End By:
a. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:27:15 UTC+0800 2019
2/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: EL240B EXCAVATOR 5WG
Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01929373
Water Pump - Remove
SMCS - 1361-011
Removal procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Personal injury can result from hot coolant, steam and alkali.
At operating temperature, engine coolant is hot and under pressure. The
radiator and all lines to heaters or the engine contain hot coolant or
steam. Any contact can cause severe burns.
Remove cooling system pressure cap slowly to relieve pressure only
when engine is stopped and cooling system pressure cap is cool enough
to touch with your bare hand.
Do not attempt to tighten hose connections when the coolant is hot, the
hose can come off causing burns.
Cooling System Coolant Additive contains alkali. Avoid contact with
skin and eyes.
1. Drain the coolant from the cooling system into a suitable container for storage or for
disposal.
2. Use hole (4) to remove tension from the V-belt.
Illustration 1 g01004978
3. Loosen bolts (3) and (6) on idler pulley assembly (7).
Note: For information on the reusability of idler pulley assembly (7), refer to Guideline For
Reusable Parts And Salvage Operations, SEBF8046, "Cast Iron and Steel Pulleys".
4. Remove water pump V-belt (5).
5. Loosen hose clamps (1). Disconnect the hose assembly between the water pump and the
water temperature regulator housing.
6. Remove bolts (2) that hold the water pump to the front of the engine. Carefully remove the
water pump and two O-ring seals from the front of the engine.
2/3E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: EL240B EXCAVATOR 5WG
Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01929375
Water Pump - Disassemble
SMCS - 1361-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
B 1P-0520 Driver Group 1
Start By:
a. Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g00614231
1. Remove O-ring seals (1) from the rear cover of the water pump. Remove bolts (2) and the
washers. Remove the rear cover and the gasket.
Illustration 2 g00614234
2. Position the water pump in a press. Use spacer plates to level the water pump.
3. Push the shaft and pulley (3) out of impeller (4) with a suitable drive plate from Tooling (A)
and a press. Remove the impeller.
Note: For information on the reusability of pulley (3), refer to Guideline For Reusable Parts
And Salvage Operations, SEBF8046, "Cast Iron and Steel Pulleys".
Note: The new 7E-0321 Pump Impeller, 153-9123 Impeller and a 109-5324 Impeller can be
removed with a bolt. Insert a bolt 0.75 inch into the thread insert of the impeller. Turn the
bolt inward toward the shaft. Twist and pull the impeller out of the pump.
2/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
Illustration 3 g00614238
Note: Do not allow the shaft and the pulley to fall to the floor when the shaft and the pulley
are removed.
4. Continue to push the shaft and pulley (3) out of seal (5) and the water pump housing.
Illustration 4 g00614253
5. Remove seal (5) from the water pump housing with the handle from Tooling (B) and a
press.
Illustration 5 g00614261
3/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Remove the shaft and the bearing from pulley (3) with a press.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 12 19:29:07 UTC+0800 2019
4/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: EL240B EXCAVATOR 5WG
Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01929381
Water Pump - Assemble
SMCS - 1361-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
C 5P-9722 Seal Driver 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1 g00614283
1. Install the shaft and the bearing into pulley (3) with a press. Install the shaft until the shaft is
flush with the end of pulley (3).
2. Press the shaft, the bearing, and pulley (3) as a unit into the water pump housing. The
distance between the front of pulley (3) and the machined surface of the water pump
housing must be 103.8 ± 0.3 mm (4.09 ± 0.01 inch).
Note: For information on the reusability of pulley (3), refer to Guideline For Reusable Parts
And Salvage Operations, SEBF8046, "Cast Iron and Steel Pulleys".
Illustration 2 g01004707
3. Install seal (5) in the water pump housing with Tooling (C).
2/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3 g00614288
4. Install impeller (4) on the shaft of the water pump with a press. Install the impeller until the
distance between the impeller and the machined surface of the water pump is
0.75 ± 0.25 mm (0.030 ± 0.010 inch).
3/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW...
2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

More Related Content

Similar to Caterpillar cat el240 b excavator (prefix 5wg) service repair manual (5wg00001 and up)

Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...fjkskekdmmenm
 
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...uufjdjdkkksmem
 
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...ufjjsjekksemmd
 
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...fjsjefskekfmme
 
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...fjjskekfsem
 
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...ufdjjskefksmem
 
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...jfjkskekfsmem
 

Similar to Caterpillar cat el240 b excavator (prefix 5wg) service repair manual (5wg00001 and up) (7)

Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
 
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
 
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
 
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
 
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...
 
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...
 
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...
Caterpillar cat 434 f backhoe loader (prefix ldh) service repair manual (ldh0...
 

More from ufjjsjekksemmd

New holland c227 stage iv compact track loader service repair manual [ndm4718...
New holland c227 stage iv compact track loader service repair manual [ndm4718...New holland c227 stage iv compact track loader service repair manual [ndm4718...
New holland c227 stage iv compact track loader service repair manual [ndm4718...ufjjsjekksemmd
 
Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...
Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...
Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...ufjjsjekksemmd
 
Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...
Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...
Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...ufjjsjekksemmd
 
Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...
Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...
Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...ufjjsjekksemmd
 
Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...
Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...
Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...ufjjsjekksemmd
 
Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...
Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...
Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...ufjjsjekksemmd
 
Caterpillar cat 245 excavator (prefix 94 l) service repair manual (94l00001 0...
Caterpillar cat 245 excavator (prefix 94 l) service repair manual (94l00001 0...Caterpillar cat 245 excavator (prefix 94 l) service repair manual (94l00001 0...
Caterpillar cat 245 excavator (prefix 94 l) service repair manual (94l00001 0...ufjjsjekksemmd
 
Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...
Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...
Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...ufjjsjekksemmd
 
Caterpillar cat 236 b3 skid steer loader (prefix a9h) service repair manual (...
Caterpillar cat 236 b3 skid steer loader (prefix a9h) service repair manual (...Caterpillar cat 236 b3 skid steer loader (prefix a9h) service repair manual (...
Caterpillar cat 236 b3 skid steer loader (prefix a9h) service repair manual (...ufjjsjekksemmd
 
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...ufjjsjekksemmd
 
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...ufjjsjekksemmd
 
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...ufjjsjekksemmd
 
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...ufjjsjekksemmd
 

More from ufjjsjekksemmd (13)

New holland c227 stage iv compact track loader service repair manual [ndm4718...
New holland c227 stage iv compact track loader service repair manual [ndm4718...New holland c227 stage iv compact track loader service repair manual [ndm4718...
New holland c227 stage iv compact track loader service repair manual [ndm4718...
 
Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...
Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...
Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...
 
Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...
Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...
Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...
 
Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...
Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...
Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...
 
Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...
Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...
Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...
 
Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...
Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...
Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...
 
Caterpillar cat 245 excavator (prefix 94 l) service repair manual (94l00001 0...
Caterpillar cat 245 excavator (prefix 94 l) service repair manual (94l00001 0...Caterpillar cat 245 excavator (prefix 94 l) service repair manual (94l00001 0...
Caterpillar cat 245 excavator (prefix 94 l) service repair manual (94l00001 0...
 
Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...
Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...
Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...
 
Caterpillar cat 236 b3 skid steer loader (prefix a9h) service repair manual (...
Caterpillar cat 236 b3 skid steer loader (prefix a9h) service repair manual (...Caterpillar cat 236 b3 skid steer loader (prefix a9h) service repair manual (...
Caterpillar cat 236 b3 skid steer loader (prefix a9h) service repair manual (...
 
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...
 
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...
Caterpillar cat 236 b skid steer loader (prefix hen) service repair manual (h...
 
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...
 
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...
Caterpillar cat 236 skid steer loader (prefix 4 yz) service repair manual (4y...
 

Recently uploaded

John Deere 990 Compact Utility Tractor Shop Manual.pdf
John Deere 990 Compact Utility Tractor Shop Manual.pdfJohn Deere 990 Compact Utility Tractor Shop Manual.pdf
John Deere 990 Compact Utility Tractor Shop Manual.pdfExcavator
 
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样AS
 
Why Is The Glow Plug Light Flashing In My VW & What Does It Indicate
Why Is The Glow Plug Light Flashing In My VW & What Does It IndicateWhy Is The Glow Plug Light Flashing In My VW & What Does It Indicate
Why Is The Glow Plug Light Flashing In My VW & What Does It IndicateWoodinville Sports Cars
 
一比一原版(Cumbria毕业证书)英国坎布里亚大学毕业证成绩单学位证书
一比一原版(Cumbria毕业证书)英国坎布里亚大学毕业证成绩单学位证书一比一原版(Cumbria毕业证书)英国坎布里亚大学毕业证成绩单学位证书
一比一原版(Cumbria毕业证书)英国坎布里亚大学毕业证成绩单学位证书AD
 
What Might Be Behind Your Mercedes' Inoperative Cruise Control
What Might Be Behind Your Mercedes' Inoperative Cruise ControlWhat Might Be Behind Your Mercedes' Inoperative Cruise Control
What Might Be Behind Your Mercedes' Inoperative Cruise ControlM Service Inc
 
快速办理澳洲昆士兰科技大学毕业证教育部学历认证书一模一样
快速办理澳洲昆士兰科技大学毕业证教育部学历认证书一模一样快速办理澳洲昆士兰科技大学毕业证教育部学历认证书一模一样
快速办理澳洲昆士兰科技大学毕业证教育部学历认证书一模一样kthcah
 
Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...
Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...
Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...Forth
 
Exploring the Heart of Alberta: A Journey from Calgary to Edmonton
Exploring the Heart of Alberta: A Journey from Calgary to EdmontonExploring the Heart of Alberta: A Journey from Calgary to Edmonton
Exploring the Heart of Alberta: A Journey from Calgary to EdmontonTheCanada BUS
 
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样A
 
出售伯明翰大学毕业证研究生文凭证书原版质量
出售伯明翰大学毕业证研究生文凭证书原版质量出售伯明翰大学毕业证研究生文凭证书原版质量
出售伯明翰大学毕业证研究生文凭证书原版质量kthcah
 
Toyota Yaris service manual Free.pdf Toyota Yaris Service manual
Toyota Yaris service manual Free.pdf  Toyota Yaris Service manualToyota Yaris service manual Free.pdf  Toyota Yaris Service manual
Toyota Yaris service manual Free.pdf Toyota Yaris Service manualAutocarmanuals.com
 
Microscope of ppt for botany major this is a project
Microscope of ppt for botany major this is a projectMicroscope of ppt for botany major this is a project
Microscope of ppt for botany major this is a projectarpitakhairwar123
 
Why Won't My Mercedes Key Fob Function After A Battery Swap
Why Won't My Mercedes Key Fob Function After A Battery SwapWhy Won't My Mercedes Key Fob Function After A Battery Swap
Why Won't My Mercedes Key Fob Function After A Battery SwapDreamcars Auto Repair
 
EV Charging Resources and Technical Assistance for Rural Communities and Trib...
EV Charging Resources and Technical Assistance for Rural Communities and Trib...EV Charging Resources and Technical Assistance for Rural Communities and Trib...
EV Charging Resources and Technical Assistance for Rural Communities and Trib...Forth
 
mechanical vibrations pebbles.pptbbbbbbbbx
mechanical vibrations pebbles.pptbbbbbbbbxmechanical vibrations pebbles.pptbbbbbbbbx
mechanical vibrations pebbles.pptbbbbbbbbxjoshuaclack73
 
What Causes The BMW X7 Power Supply Warning To Illuminate
What Causes The BMW X7 Power Supply Warning To IlluminateWhat Causes The BMW X7 Power Supply Warning To Illuminate
What Causes The BMW X7 Power Supply Warning To IlluminateMedway Imports
 
Access to Rural Charging by David Skakel
Access to Rural Charging by David SkakelAccess to Rural Charging by David Skakel
Access to Rural Charging by David SkakelForth
 
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样zovambe
 
Preparing for Transportation Electrification: The Electric Coop Perspective
Preparing for Transportation Electrification: The Electric Coop PerspectivePreparing for Transportation Electrification: The Electric Coop Perspective
Preparing for Transportation Electrification: The Electric Coop PerspectiveForth
 
一比一原版英国哈珀亚当斯大学毕业证如何办理
一比一原版英国哈珀亚当斯大学毕业证如何办理一比一原版英国哈珀亚当斯大学毕业证如何办理
一比一原版英国哈珀亚当斯大学毕业证如何办理AS
 

Recently uploaded (20)

John Deere 990 Compact Utility Tractor Shop Manual.pdf
John Deere 990 Compact Utility Tractor Shop Manual.pdfJohn Deere 990 Compact Utility Tractor Shop Manual.pdf
John Deere 990 Compact Utility Tractor Shop Manual.pdf
 
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
一比一原版(Auburn毕业证书)奥本大学毕业证原件一模一样
 
Why Is The Glow Plug Light Flashing In My VW & What Does It Indicate
Why Is The Glow Plug Light Flashing In My VW & What Does It IndicateWhy Is The Glow Plug Light Flashing In My VW & What Does It Indicate
Why Is The Glow Plug Light Flashing In My VW & What Does It Indicate
 
一比一原版(Cumbria毕业证书)英国坎布里亚大学毕业证成绩单学位证书
一比一原版(Cumbria毕业证书)英国坎布里亚大学毕业证成绩单学位证书一比一原版(Cumbria毕业证书)英国坎布里亚大学毕业证成绩单学位证书
一比一原版(Cumbria毕业证书)英国坎布里亚大学毕业证成绩单学位证书
 
What Might Be Behind Your Mercedes' Inoperative Cruise Control
What Might Be Behind Your Mercedes' Inoperative Cruise ControlWhat Might Be Behind Your Mercedes' Inoperative Cruise Control
What Might Be Behind Your Mercedes' Inoperative Cruise Control
 
快速办理澳洲昆士兰科技大学毕业证教育部学历认证书一模一样
快速办理澳洲昆士兰科技大学毕业证教育部学历认证书一模一样快速办理澳洲昆士兰科技大学毕业证教育部学历认证书一模一样
快速办理澳洲昆士兰科技大学毕业证教育部学历认证书一模一样
 
Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...
Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...
Charging Forward: Bringing Electric Vehicle Charging Infrastructure to Rural ...
 
Exploring the Heart of Alberta: A Journey from Calgary to Edmonton
Exploring the Heart of Alberta: A Journey from Calgary to EdmontonExploring the Heart of Alberta: A Journey from Calgary to Edmonton
Exploring the Heart of Alberta: A Journey from Calgary to Edmonton
 
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
一比一原版(Rutgers毕业证书)罗格斯大学毕业证成绩单原件一模一样
 
出售伯明翰大学毕业证研究生文凭证书原版质量
出售伯明翰大学毕业证研究生文凭证书原版质量出售伯明翰大学毕业证研究生文凭证书原版质量
出售伯明翰大学毕业证研究生文凭证书原版质量
 
Toyota Yaris service manual Free.pdf Toyota Yaris Service manual
Toyota Yaris service manual Free.pdf  Toyota Yaris Service manualToyota Yaris service manual Free.pdf  Toyota Yaris Service manual
Toyota Yaris service manual Free.pdf Toyota Yaris Service manual
 
Microscope of ppt for botany major this is a project
Microscope of ppt for botany major this is a projectMicroscope of ppt for botany major this is a project
Microscope of ppt for botany major this is a project
 
Why Won't My Mercedes Key Fob Function After A Battery Swap
Why Won't My Mercedes Key Fob Function After A Battery SwapWhy Won't My Mercedes Key Fob Function After A Battery Swap
Why Won't My Mercedes Key Fob Function After A Battery Swap
 
EV Charging Resources and Technical Assistance for Rural Communities and Trib...
EV Charging Resources and Technical Assistance for Rural Communities and Trib...EV Charging Resources and Technical Assistance for Rural Communities and Trib...
EV Charging Resources and Technical Assistance for Rural Communities and Trib...
 
mechanical vibrations pebbles.pptbbbbbbbbx
mechanical vibrations pebbles.pptbbbbbbbbxmechanical vibrations pebbles.pptbbbbbbbbx
mechanical vibrations pebbles.pptbbbbbbbbx
 
What Causes The BMW X7 Power Supply Warning To Illuminate
What Causes The BMW X7 Power Supply Warning To IlluminateWhat Causes The BMW X7 Power Supply Warning To Illuminate
What Causes The BMW X7 Power Supply Warning To Illuminate
 
Access to Rural Charging by David Skakel
Access to Rural Charging by David SkakelAccess to Rural Charging by David Skakel
Access to Rural Charging by David Skakel
 
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
一比一原版(CCA毕业证书)加利福尼亚艺术学院毕业证成绩单原件一模一样
 
Preparing for Transportation Electrification: The Electric Coop Perspective
Preparing for Transportation Electrification: The Electric Coop PerspectivePreparing for Transportation Electrification: The Electric Coop Perspective
Preparing for Transportation Electrification: The Electric Coop Perspective
 
一比一原版英国哈珀亚当斯大学毕业证如何办理
一比一原版英国哈珀亚当斯大学毕业证如何办理一比一原版英国哈珀亚当斯大学毕业证如何办理
一比一原版英国哈珀亚当斯大学毕业证如何办理
 

Caterpillar cat el240 b excavator (prefix 5wg) service repair manual (5wg00001 and up)

  • 2. Shutdown SIS Previous Screen Product: EXCAVATOR Model: EL240B EXCAVATOR 5WG Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01929226 Engine Oil Cooler - Remove SMCS - 1378-011 Removal Procedure Start By: a. Remove the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Remove". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. 1/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 3. Dispose of all fluids according to local regulations and mandates. Note: For information on the reusability of the engine oil cooler, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8077, "Engine Oil Coolers". Illustration 1 g00677082 1. Remove engine oil cooler (1) and the gasket. Illustration 2 g00677084 2. Remove O-ring seals (2). Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Sep 12 19:22:36 UTC+0800 2019 2/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 4. Shutdown SIS Previous Screen Product: EXCAVATOR Model: EL240B EXCAVATOR 5WG Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01929231 Engine Oil Cooler - Install SMCS - 1378-012 Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Note: For information on the reusability of the engine oil cooler, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8077, "Engine Oil Coolers". Illustration 1 g00677084 1/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 5. 1. Install new O-ring seals (2). Illustration 2 g00677107 2. Install new gasket (3) on the engine oil cooler (1). Illustration 3 g00677082 Note: Installation can be simplified by the use of guide bolts. 3. Install the gasket and engine oil cooler (1). End By: a. Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install". Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Sep 12 19:23:32 UTC+0800 2019 2/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 6. Shutdown SIS Previous Screen Product: EXCAVATOR Model: EL240B EXCAVATOR 5WG Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01929340 Engine Oil Pump - Remove SMCS - 1304-011 Removal Procedure Start By: a. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. 1/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 7. Dispose of all fluids according to local regulations and mandates. Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8167, "Reconditioning Procedures 3114 and 3116 Engines". Illustration 1 g00894501 1. Remove bolts (1) and bolt (2). 2. Remove engine oil pump (3). 3. Remove the O-ring seal that is located between the cylinder block and the outlet elbow. Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Sep 12 19:24:28 UTC+0800 2019 2/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 8. Shutdown SIS Previous Screen Product: EXCAVATOR Model: EL240B EXCAVATOR 5WG Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01944046 Engine Oil Pump - Disassemble SMCS - 1304-015 Disassembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1P-0510 Driver Gp 1 B 1P-2320 Combination Puller 1 Start By: a. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE 1/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 9. Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8167, "Reconditioning Procedures 3114 and 3116 Engines". Illustration 1 g00614664 1. Remove the bolts from tube assembly for the pickup of oil (2), and the gasket from the engine oil pump. Remove the bolt and outlet elbow (1) from the engine oil pump. Illustration 2 g00614677 2. Remove bolt (3), washer (4), and idler gear (5) from the engine oil pump. 2/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 10. Illustration 3 g00614683 3. Use Tooling (A) and a suitable press in order to remove the bearing from idler gear (5). 4. Remove shaft (6) of engine oil pump from oil pump body assembly (7). 5. Use Tooling (B) to remove drive gear (8). Illustration 4 g00614689 6. Remove bolts (10). Separate oil pump body (9) from oil pump body assembly (7). Illustration 5 g00614694 3/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 11. NOTICE Before removing the drive shaft from the pump housing, be sure that no burrs exist on the drive shaft. If the drive shaft has burrs on it, the bores in the pump housing may be scratched. 7. Remove shaft assembly (11) and shaft assembly (12) from oil pump body (9). Illustration 6 g00824021 Personal injury can result from parts and/or covers under spring pressure. Spring force will be released when covers are removed. Be prepared to hold spring loaded covers as the bolts are loosened. 8. Remove the following items from oil pump body assembly (7): the bolt and the washer, spring (14) and oil pressure relief plunger (13) Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Sep 12 19:25:24 UTC+0800 2019 4/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 12. Shutdown SIS Previous Screen Product: EXCAVATOR Model: EL240B EXCAVATOR 5WG Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01944064 Engine Oil Pump - Assemble SMCS - 1304-016 Assembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1P-0510 Driver Gp 1 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8167, "Reconditioning Procedures 3114 and 3116 Engines". 1. Ensure that all of the parts of the engine oil pump are thoroughly clean prior to assembly. Note: Lubricate all internal parts of the engine oil pump with clean engine oil. 1/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 13. Illustration 1 g00824021 Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. 2. Install oil pressure relief plunger (13) and spring (14) in oil pump body assembly (7). Install the washer and the bolt. Illustration 2 g00614694 2/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 14. Illustration 3 g00614689 3. Install shaft assembly (12) in oil pump body (9). 4. Install shaft assembly (11) in oil pump body (9). 5. Position oil pump body (9) on oil pump body assembly (7) and install bolts (10). Illustration 4 g00614683 6. Press drive gear (8) on shaft assembly (11) until drive gear (8) is flush with the end of shaft assembly (11). 7. Install oil pump shaft (6). Install the bearing in idler gear (5) with Tooling (A). Install the bearing so the distance between the hub bolt face of idler gear (5) and the bearing is 0.75 ± 0.25 mm (0.030 ± 0.010 inch). 3/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 15. Illustration 5 g00614677 8. Install idler gear (5) on oil pump shaft (6). Install washer (4) and bolt (3). Tighten bolt (3) to 70 ± 15 N·m (52 ± 11 lb ft). Illustration 6 g00614664 9. Check the condition of the gasket that is used in tube assembly for the pickup of oil (2). If the gasket is damaged, replace the gasket. Install the gasket and tube assembly for the pickup of oil (2). 10. Check the condition of the O-ring seal that is used in outlet elbow (1). If the O-ring seal is damaged, replace the O-ring seal. Install the O-ring seal and outlet elbow (1). End By: a. Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install". Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Sep 12 19:26:19 UTC+0800 2019 4/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 16. Shutdown SIS Previous Screen Product: EXCAVATOR Model: EL240B EXCAVATOR 5WG Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01981031 Engine Oil Pump - Install SMCS - 1304-012 Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Note: Ensure that the mounting surfaces for the engine oil pump are thoroughly clean. 1/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 17. Illustration 1 g01029320 1. Install the O-ring seal. Position engine oil pump (3) on the cylinder block. 2. Install bolts (1) and bolt (2). End By: a. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install". Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Sep 12 19:27:15 UTC+0800 2019 2/2E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 18. Shutdown SIS Previous Screen Product: EXCAVATOR Model: EL240B EXCAVATOR 5WG Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01929373 Water Pump - Remove SMCS - 1361-011 Removal procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. 1/3E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 19. Personal injury can result from hot coolant, steam and alkali. At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns. Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand. Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns. Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes. 1. Drain the coolant from the cooling system into a suitable container for storage or for disposal. 2. Use hole (4) to remove tension from the V-belt. Illustration 1 g01004978 3. Loosen bolts (3) and (6) on idler pulley assembly (7). Note: For information on the reusability of idler pulley assembly (7), refer to Guideline For Reusable Parts And Salvage Operations, SEBF8046, "Cast Iron and Steel Pulleys". 4. Remove water pump V-belt (5). 5. Loosen hose clamps (1). Disconnect the hose assembly between the water pump and the water temperature regulator housing. 6. Remove bolts (2) that hold the water pump to the front of the engine. Carefully remove the water pump and two O-ring seals from the front of the engine. 2/3E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 20. Shutdown SIS Previous Screen Product: EXCAVATOR Model: EL240B EXCAVATOR 5WG Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01929375 Water Pump - Disassemble SMCS - 1361-015 Disassembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1P-0510 Driver Group 1 B 1P-0520 Driver Group 1 Start By: a. Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove". NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. 1/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 21. Illustration 1 g00614231 1. Remove O-ring seals (1) from the rear cover of the water pump. Remove bolts (2) and the washers. Remove the rear cover and the gasket. Illustration 2 g00614234 2. Position the water pump in a press. Use spacer plates to level the water pump. 3. Push the shaft and pulley (3) out of impeller (4) with a suitable drive plate from Tooling (A) and a press. Remove the impeller. Note: For information on the reusability of pulley (3), refer to Guideline For Reusable Parts And Salvage Operations, SEBF8046, "Cast Iron and Steel Pulleys". Note: The new 7E-0321 Pump Impeller, 153-9123 Impeller and a 109-5324 Impeller can be removed with a bolt. Insert a bolt 0.75 inch into the thread insert of the impeller. Turn the bolt inward toward the shaft. Twist and pull the impeller out of the pump. 2/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 22. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
  • 23. Illustration 3 g00614238 Note: Do not allow the shaft and the pulley to fall to the floor when the shaft and the pulley are removed. 4. Continue to push the shaft and pulley (3) out of seal (5) and the water pump housing. Illustration 4 g00614253 5. Remove seal (5) from the water pump housing with the handle from Tooling (B) and a press. Illustration 5 g00614261 3/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 24. 6. Remove the shaft and the bearing from pulley (3) with a press. Copyright 1993 - 2019 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Sep 12 19:29:07 UTC+0800 2019 4/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 25. Shutdown SIS Previous Screen Product: EXCAVATOR Model: EL240B EXCAVATOR 5WG Configuration: E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POWERED BY 3116 ENGINE Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01929381 Water Pump - Assemble SMCS - 1361-016 Assembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty C 5P-9722 Seal Driver 1 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 1/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 26. Illustration 1 g00614283 1. Install the shaft and the bearing into pulley (3) with a press. Install the shaft until the shaft is flush with the end of pulley (3). 2. Press the shaft, the bearing, and pulley (3) as a unit into the water pump housing. The distance between the front of pulley (3) and the machined surface of the water pump housing must be 103.8 ± 0.3 mm (4.09 ± 0.01 inch). Note: For information on the reusability of pulley (3), refer to Guideline For Reusable Parts And Salvage Operations, SEBF8046, "Cast Iron and Steel Pulleys". Illustration 2 g01004707 3. Install seal (5) in the water pump housing with Tooling (C). 2/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
  • 27. Illustration 3 g00614288 4. Install impeller (4) on the shaft of the water pump with a press. Install the impeller until the distance between the impeller and the machined surface of the water pump is 0.75 ± 0.25 mm (0.030 ± 0.010 inch). 3/4E240B, EL240B TRACK-TYPE EXCAVATORS 5WG00001-UP (MACHINE) POW... 2019/9/12https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...