2. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 428F2 BACKHOE LOADER LYG
Configuration: 428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain
Media Number -UENR3743-01 Publication Date -01/06/2015 Date Updated -05/06/2018
i06145783
Transmission (Direct Drive) - Disassemble
SMCS - 3030-015-DD
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1590 Lifting Eye Assembly 2
B 422-5471 Lifting Eye Assembly 1
C 4C-3652 Spring Compressor 1
D 1P-1859 Retaining Ring Pliers 1
E 8H-0663 Bearing Puller Gp 1
F 8B-7551 Bearing Puller Gp 1
G 1U-6400 Three Jaw Puller 1
H 137-8102 Spring Compressor 1
Start By:
a. Remove the transmission.
1/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g03827943
1. Use two people to remove torque converter (1). The weight of torque converter (1) is
approximately 23 kg (51 lb). Remove torque converter (1) from transmission (2).
2. Remove bolt (4), the washer, and yoke (3) from transmission (2).
Illustration 2 g03828843
3. Remove shaft (5) from transmission (2).
4. Remove bolts (7) and gear shift (6) from transmission (2).
5. Remove bolts (10) and support assemblies (8) from transmission (2).
6. Remove bolt (11), the washer, and yoke (9) from transmission (2).
2/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g03828844
7. Remove bolts (13) and solenoid valve (12) from transmission (2).
Illustration 4 g03828845
Illustration 5 g03828846
Personal injury can result from being struck by parts propelled by a
released spring force.
3/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Remove head (14) from solenoid valve (12). Remove O-ring seal (15) from head (14).
9. Remove spring (16), carrier (17), spring (18), and piston (19) from solenoid valve (12).
Illustration 6 g03828847
Illustration 7 g03828848
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 10. Remove plug (20) from solenoid valve (12). Remove O-ring seal (21) from plug (20).
11. Remove spring (22) and poppet (23) from solenoid valve (12).
Illustration 8 g03828849
Illustration 9 g03828850
12. Remove self locking nut (24), O-ring seal (26) coil assembly (25), and O-ring seal (27) from
solenoid valve (12).
Illustration 10 g03828851
5/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 11 g03828852
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
13. Remove tube assembly (28) from solenoid valve (12). Remove O-ring seal (29) from tube
assembly (28).
14. Remove spring (30), push rod (31), washer (32), and spool (33) from solenoid valve (12).
Illustration 12 g03828876
15. Remove O-ring seals (34) from solenoid valve (12).
16. Repeat Step 8 through Step 14 for the opposite side of solenoid valve (12).
6/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 13 g03828878
17. Attach Tooling (A) and a suitable lifting device to transmission (2). The weight of
transmission (2) is approximately 255 kg (562 lb). Place transmission (2) on a suitable work
bench. Secure transmission (2) to the suitable work bench.
18. Remove bolts (35) that secure the case.
Illustration 14 g03828879
19. Attach Tooling (A) and Tooling (B) to case (36). The weight of case (36) is approximately
45 kg (100 lb). Remove case (36) from the transmission.
Direct Drive, Front Output Shaft
7/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 15 g03828880
1. Remove front output shaft (37).
Illustration 16 g03829476
Illustration 17 g03829477
2. Use suitable press to remove bearing cone (38).
3. Remove bearing cone (38), thrust washer (39), needle bearing (40), and gear (41) from the
shaft.
8/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 4. Remove roller bearing (42), spacer (43), roller bearing (44), needle bearing (45), and thrust
washer (46) from the shaft.
Illustration 18 g03829478
5. Remove retaining ring (47).
Illustration 19 g03829479
6. Remove plate (48).
Illustration 20 g03829480
9/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4.4 ...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 21 g03829481
7. Remove friction disks (49) and friction clutches (50).
Illustration 22 g03829482
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Use a suitable press and Tooling (C) to compress spring assembly (52). Use Tooling (D) to
remove retaining ring (51).
10/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 23 g03829483
9. Remove spring assembly (52) and retainer (53).
Illustration 24 g03829484
10. Release piston (54) by applying 207 kPa (30 psi) of air pressure into the lube passage as
indicated.
11. Remove seal ring (55).
Illustration 25 g03829485
11/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 12. Use Tooling (E) and a suitable press to remove bearing cone (56). Remove bearing cone
(56).
Direct Drive, Rear Output Shaft
Illustration 26 g03829593
Illustration 27 g03829664
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove plug (57), spring (59), and ball (58).
12/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 28 g03829665
Illustration 29 g03829668
2. Remove screws (60) from the shift forks. Remove rod (61) and ball (62).
Illustration 30 g03829669
Personal injury can result from being struck by parts propelled by a
released spring force.
13/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Note: Reinstalling plug (57) keeps the spring and the ball from being propelled from the
transmission case.
3. Reinstall plug (57) into the transmission case.
4. Remove rod (63) and shift forks (64).
Illustration 31 g03829670
Illustration 32 g03829671
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
14/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
17. Follow the recommended procedure and use all recommended tooling to
release the spring force.
5. Remove plug (57), ball (67), and spring (66).
6. Remove rear output shaft (65).
Illustration 33 g03829672
Illustration 34 g03829763
7. Remove screw (69) and washer (68).
8. Use Tooling (F) and a suitable press to remove bearing cone (70) and gear (71).
15/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 35 g03829764
9. Remove needle bearings (72) and (73).
10. Use Tooling (D) to remove lock ring (74).
Illustration 36 g03829765
11. Remove synchronizer assembly (75).
Illustration 37 g03829811
12. Remove sleeve (76).
16/33428F2 Side Shift Backhoe Loader LYG00001-UP (MACHINE) POWERED BY C4...
2019/12/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
