Schneider Electric Cable Management Systems - GRP Cable Trays

1. Product update
GRP cable management
> August 2013
GRP cable management systems
GRP (Glass Reinforced Polymer) cable support systems possess
unique properties which enable them to resist many corrosive
environments, particularly where conditions indicate that
conventional materials may not provide an economic service life.
Constructed from glass reinforced thermoset resins, GRP is designed and manufactured with a structural
integrity normally only associated with steel, but without its corrosion, weight and electrical conductivity
problems.
As GRP is non conductive, there is no concern of transmitting electricity into the support system from
damaged cables. Additionally there is no requirement for special support conditions to prevent electrolytic
corrosion. Non conductive and non magnetic features mean a safer support system.
Cable tray/troughing product options
Accessories
Width Width (mm)
Depth 100 150 200 300 400
60mm ✔ ✔ ✔ ✔ ✘
80mm ✔ ✔ ✔ ✔ ✔
110mm ✔ ✔ ✔ ✔ ✔
210mm ✘ ✔ ✘ ✘ ✘
Tray and troughing is available in depths 60mm to 210mm with widths from 100mm to 400mm.
To compliment the offer a full range of accessories* are available such as:
45º and 90º flat bends
45º and 90º external risers
45º and 90º internal risers
Tees
Crossovers
Left hand and right hand reducers
*All accessories can be supplied with covers
The standard length of the product is 3 metres but it can be supplied in 6 metres lengths upon request,
although minimum order requirements may exist.

2. Cable ladder product options
GRP channel support systems
SE8286 AUG 13
Width Width (mm)
Profile 150 200 300 400 450 600 750 900 1000
GMLN ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘
GNLN ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘
GHL ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
GAL ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
GXL ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Schneider Electric offers five different profiles based on the weight carrying requirements and is available in
widths ranging from 150mm to 1000mm.
As an alternative to traditional channel, Schneider Electric can offer GRP channel and a full range of
accessories such as plates, brackets and couplers.
These can be used with our ladder, tray and troughing systems or supporting other services such as ducting
and pipework.
The standard length of the product is 3 metres but it can be supplied in 6 metres lengths upon request,
although minimum order requirements may exist.
Accessories
To compliment the offer a full range of accessories* are available such as:
45º and 90º flat bends
45º and 90º external risers
45º and 90º internal risers
Tees
Crossovers
Straight, left hand and right hand reducers
*All accessories can be supplied with covers
WidthReference Dimensions
GS0 28 x 38mm Light duty
GS1 41.5 x 41.5mm Light duty
GS2 41.5 x 41.5mm Standard duty
GS3 42.5 x 43.5mm Heavy duty
GS3D 85 x 43.5mm Extra deavy duty - back to back
Products are supplied in 3 metres lengths as standard.
The product can be slotted, although minimum order requirements may exist.
For further information please contact us on 0870 608 8 608 or go to
www.schneider-electric.com/uk