1. BUILDING STRUCTURE ( ARC 2523 )
NUR NATASYA LIYANA BINTI ZULKHAIRI 0320851
NORKHADIZAH BT HARUNSANI 0314704
NURAIN BT MOHD YAZID 1004E78741
2. CONTENTS
1.0 INTRODUCTION
2.0 EXISTING HOUSE FLOOR PLAN, ROOF PLAN
3.0 EXTENSION PROPOSAL INDIVIDUAL CALCULATION
Member one :
NUR NATASYA LIYANA BINTI ZULKHAIRI
Member two :
NURAIN BINTI MOHD YAZID
Member three :
NORKHADIZAH BT HARUNSANI
3. Introduction:
The project is an integrated component where it involves structural theory, force calculation and
basic structural proposal. This project is designed to allow the demonstration of knowledge and
understanding of building structure.
Objective of study:
Throughout this project, we have learnt to:
-To introduce the basic process of building structures design process to the students.
-To enable the students to have a holistic experience including concept and structure
layout design, building structure engineering considerations, structure members sizing
and calculations, final report and presentation
Learning Outcomes:
-Produce a complete documentation on structural system of a case study
-Explore and understand the concept of structural analysis
-Identification of structural components
-Recognize, Execute and implement basic procedures of building structure design
-Produce a structural proposal
4. PROJECT INTRODUCTION
This project required us to find a floor plan of a bungalow with a maximum height is 3
storeys. Our group chooses a double storey bungalow house for proposing an extension for the
house. By understanding the layout of functional spaces of the house, we have thus proposed the
following extension. Using the floor plans, we were required to frame the building and prepare
structural plans of the building.
Besides that, we have to understand the structural layout of buildings and columns, this
project seeks to analyze the load distribution of columns and beams by establishing a proposal for
a place of residence.
Within a subgroup of 2 members, we were required to propose an extension to the bungalow that
must not exceed 30% of the existing floor area and should be of two storey. The extension then
needs to be framed and we were to identify and quantify the loads acting on the structures
through a beam and column analysis.