Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer

1. DAYSENSOR
DYJN-101 Static torque sensor
Features:
·For static noncontinuous rotation
·Can be non-standard customized
·Anti-interference signals are stable
·High quality alloy steel
·
widely used in test machine, torque wrench
and steering machine Still load torque of
the electric actuator, valve, and
transmission In the hydraulic and
equivalent static torque test system.
qualification
Rated quantitative schedule N.m 0-10000
Output sensitivity mV/V 1.0-2.0
Zero point output %F.S. ±2
Non-linear %F.S. 0.3
lag %F.S. 0.1
Repeatability %F.S. 0.1
Creep (30 min) %F.S. 0.1
Temperature sensitivity drift %F.S./10℃ 0.05
Zero temperature drift %F.S./10℃ 0.05
Response frequency Hz 1k
Material 42CrMoA
impedance Ω 350/700
Insulation resistance MΩ/100V DC ≥5000
Use voltage V 5-15
Operating temperature range ℃ -20-80
Safety overload %R.C. 120
Extreme overload %R.C. 150
Cable line specifications m Φ5*3m
Cable limit pull force N 98
TEDS selectable
1) High temperature sensors are available, with a maximum operating temperature of 150℃.
2) High impedance sensors can be provided with an output impedance of 1000 Ω.
https://www.loadcells.store

2. DAYSENSOR
Product Size Fig
Unit: mm
Range（N.m） A B C D E F N G
1-30 69 65 14 41 6.5 57 6 12
30-300 69 65 22 41 6.5 57 6 12
500-1000 98 80 30 60 8.5 80 8 15
2000-5000 125 96 45 79 13 105 8 20
10000 160 120 40 101 17 130 8 30
20000 210 120 / 112 22 165 8 30
100000 350 200 / 176 26 285 12 50
force diagram
Limit nuts are convenient to install and screw loose after installation