Haiwei H8 4G WIFI+ Battery HDMI over ip encoder user manual

Shenzhen haiwei Vision technology 深圳海威视讯技术有限公司 www.hwsxtec.com
3G/4G+WIFI
HD VIDEO AUDIO IP ENCODER
2017@ HAIWEI
4G VIDEO ENCODER
instruction manual

Summary
Summary.............................................................................................................................................................................1
preface.................................................................................................................................................................................2
H8 4G encoder...................................................................................................................................................................3
Summary.............................................................................................................................................................................7
一、 Installation..........................................................................................................................................................8
1. Connecting Illustration .........................................................................................................................................8
2. Illustration...............................................................................................................................................................8
1. Steps.........................................................................................................................................................................9
2. Local ip address settings.....................................................................................................................................9
3. Ping........................................................................................................................................................................ 12
二、 Access to backstage management (WEB) ................................................................................................ 14
1. Open browser ..................................................................................................................................................... 14
2. Fill URL.................................................................................................................................................................. 14
3. Access to the WEB............................................................................................................................................. 15
4. 4G Net configuration........................................................................................................................................ 15
5. LAN Settings ....................................................................................................................................................... 16
6. Mainstream setting ........................................................................................................................................... 16
7. Audio..................................................................................................................................................................... 19
8. OSD........................................................................................................................................................................ 19
9. Image color control........................................................................................................................................... 20
10. RTMP-HLS............................................................................................................................................................ 20
11. System .................................................................................................................................................................. 20
12. VLC media player............................................................................................................................................... 21
13. Technical parameter.......................................................................................................................................... 24
14. Specification........................................................................................................................................................ 24
三. Contact information ............................................................................................................................................... 25

Preface
In order to learn more about the product information,
technical operation of HD encoder more efficiently, convenient
and fast maintenance for engineers and professionals, Haiwei
cultivated its instruction manual.
It contains the instructions, functions and features of the
Haiwei 4G video encoder.
Please contact us if any problem encountered.
Company status: www.facebook.com/HaiweiEncoder
Or www.hwsxtec.com
NOTE:
Copyright@ Shenzhen haiwei vision technology,
Copy and transmit prohibited.

H8 4G encoder
1. Appearance

2. Front panel

3. Back panel

4. Functions
NO Item classification Function
1 Net
Wired Lan
When first use, you need to set up encoder in LAN, then
switch to 3g/ 4g Or wifi mode
WiFi WIFI 2.4G
When you need to use WiFi fuction, switch to WiFi
mode after set up encoder in LAN
Mobile
3G 4G
Plug in Sim-card, access to backstage in LAN, set up 4g
parameter then restart
2 Indicators
Net
Blue
indicator
Signal
Yellow
indicator
Data
Encoder
Red
indicator
Power
Yellow
indicator
Streaming( flashing)
Green
indicator
Network
1~4 blue
indicator
Battery indicator, 4 light means the battery full charged,
when it’s 1light only, its means need to charge
5 blue
indicator
3G/4G signal indicator, strong flashing when signal is strong
3 Antenna
3G/ 4G Better signal when installed
Wifi Better signal when installed
4
Bottoms
Reset
Reset the
encoder
Plug into the bottom, keeps 6-7 seconds until blue indicator
stop flashing. Access to backstage when its flashing again
5
Card
driver
Pop-
out SIM card
Press it then Sim card pop-out
6 Switch
Power
Switch to OFF means switch off the encoder, contrary is
switch on
7 Power DC
DC: 5 V
2.4 A
In order to ensure the encoder working properly, DC: 5 V
2.4 A needed

8 Battery 9000 mAh
In order to security, dismantle the battery, thrown into fire,
operating in the place near high temperature are prohibited
Summary
3G/ 4G-HD-Video Encoder is R&D, produced @Shenzhen haiwei vision
technology. The highest resolution is 1920*1080P, in order to meet different
requirements, many different resolutions added, such as 1080I. 1280*720(720P),
720*576(720i). We produced three different designs: 1. HDMI. 2. HDMI+ CVBS. 3.
SDI. All the designs support access to web backstage management multi devices
simultaneously, multi network protocol.
In order to adapt for different uses, Haiwei produced: HDMI, SDI, VGA, BNC,
CVBS, YPBPR Encoder. Supports: HTTP, UDP, RTSP, RTMP, ONVIF, HLS etc network
protocol.
Notice：Test UDP/ RTSP/ ONVIF in LAN
1. Check the accessories are connected before switch on Encoder
2. Place the encoder in ventilation and dry environment
3. In order to works properly, use standard communication network when
crowded network is needed
4. Use “ 1000M” network port when you wanna watch online video
5. AC：5V 2.4 A，notice：The circuit is complex, do not dismount the machine
6. Default IP：192.168.1.168. log in again after restored settings is needed

一、 Installation
1. Connecting Illustration
1
2. Illustration
Access to video encoder through 3G/ 4G, WIFI, LAN- Set up network protocol:
HTTP, RTSP, UDP, RTMP, ONIVF, HLS- Server- local server/ PC/ Smartphone.

Network
Windows8.1 IP configuration
1. Steps
Enter “network center” – “Local” - “Properties”- “TCP/ IPv4”
For example: Default computer IP gateway: 192.168.0.1
Input Ip address：192.168.1.100 subnet mask：255 255 255 0（Don’t input ip
address: 192.168.1.168, unless the ip of encoder ain’t 192.168.1.168）
2. Local ip address settings
Illustration
1
2

3
4

5

6
Ensure the IP address and the network is working and ain’t the existed one.
Ping the encoder IP address when network resumed, it’s working as following
picture shows, you can access to encoder on WEB now.
3. Ping
1

2
WINDOWS+ R
Enter “CMD”- DOS：ping 192.168.1.168 -t。
3
4

Ping the IP of Encoder (means you can access to WEB)
二、 Access to backstage management (WEB)
1. Open browser
2. Fill URL

Default ip address: 192.168.1.168.
3. Access to the WEB
4. 4G Net configuration
This is am example when Sim card inserted
4G signal： -95 67% (dbm)
4G operator： Chn-ct
4G IP： 10.19.50.158

4G Sub net mask： 255.255.255.0
4G default gateway ： 10.19.50.158
4G DNS1： 202.96.128.86
4G DNS2： 202.96.134.133
5. LAN Settings
DHCP：禁用）
IP： 192.168.1.16
Sub net mask： 255.255.255.
Default gateway： 192.168.1.1
DNS1： 223.5.5.5
DNS2： 114.114.114.
MAC： 50:10:9B:A9:
6. Mainstream setting
Channel name： CCTV1 （such as CCTV1）
Bitrate control： cbr
Key interval： 100 [5-200]

Encoded size：自动
Bitrate(K)： 3200 [16-12000]
Fluctuate level：自动
H.264： baseline profile
Frame：
30 [5-60]
Package： ffm peg
Buffer Mode： 188x7 (related to the size of files)
PMT ID： 260 [1-65535]
Transport ID： 264 [256-3840]
Stream ID： 280 [256-3840]
HTTP：
/hdm i 启用 format: /your need
http://192.168.1.168:80/your need
HTTP port：
81 [1-65535]
RTSP： /hdm i 启用

RTSP port：
555 [1-65535]
RTSP mode：视频+音频 (audio/ video/ A/V)
Unicast IP： 192.168.1.10 启用
Unicast port：
10000
Multicast IP： 238.0.0.1 启用
Multicast port： 1234
RTMP server ip： 192.168.1.10 启用
RTMP port ：
1935 ( 1- 65535)
RTMP mode：视频+音频 ( audio/ video/ A/V)
RTMP user name：
RTMP password：
RTMP app name： live
RTMP stream hdm i

name：
7. Audio
Audio input： HDM Iaudio
Audio bitrate： 128000
Audio channel：左+右
Audio codec： AAC (encoded format)
AAC type： LC
Resample ：禁用
RTSP audio
encode：
AAC
Audio gain：关闭
8. OSD
Update logo：
上传图片 [ ( BMP format is needed)
logo：打开
logo X： 20
logo Y： 60
Font X： 20
Font Y： 60

Font size： 28
Alpha： 20 (higher value, more transparency)
Font color：
0xFFFF0000 （Red: 0xFFFF0000 Green: 0xFF00FF00 Blue:
0xFF0000FF）
Text：网络编码器
9. Image color control
Brightness： 45 [0-100]
contrast ratio： 52 [0-100]
hue： 53 [0-100]
saturation： 54 [0-100]
10. RTMP-HLS
RTMP-HLS：打开
RTMP address： rtmp://192.168.1.168:1935/hls/hd-live
HLS address： http://192.168.1.168:8235/hls/hd-live.m3u8
11. System
1) Reboot interval： 54
2) Change password： 54
3) System version：
Hardware version： v1.1.0_20161215_80_1_release

onvif： version 2.8.32
4) Upgrade：上传文件 [( Name: upgrade.bin）
12.VLC media player
Copy the address and open it with VLC- streaming- network- fill the URL
( Except RTMP)：
Such as HTTP： WEB management→ Mainstream → Enable HTTP→ Apply→
Status( find the URL) → VLC→ fill the URL→ Done
1
2

13. Technical parameter
Items Name Specification
1 Power DC: 5V 2.4 A Battery：8400 mAh
2 Size 101 mm X 44mm X 70mm
3 Net 0.4 Kg
4 Consumption 5 W
5 Environment -10℃--60 ℃
6 Port HDMI/ SDI
7 Protocol HTTP RTSP RTMP UDP ONVIF HLS Unicast Multicast
8 Network LAN: RJ45 100M/1000M. WIFI: 2.4G MONET:3G/4G
10 Management Chinese/ English. ( Scalable firmware)
14.Specification
 Default IP: 192.168.1.168
 Codec level: baseline profile main profile high profile
 Bitrate control：CBR/ VBR.
 Video Bitrate: 16 kbit~12000 kbit.
 Audio: built-in/ external Sampling rate: 64Kb/s~384Kb/s
 Fluctuate level:1-5
 Encoded Audio:AAC MP3 Sampling rate: 32000 44100 48000 etc
 Encoded audio bitrate: 48 K, 64 K, 96 K, 128 K, 160 K, 192 K, 256 K.
 Package:FFMPEG, VLC
 Transportation: TCP UDP. 100M/ 1000M RJ45.

 Protocols: RTMP RTSP HTTP UDP ONVIF Unicast Multicast HLS (RTMP Support
add user name and password).
 Chinese / English management backstage, change access password
 Image optimization: Contrast, brightness, hue, saturation, Noise detection,
Sharpness, wave filtering…
 ODS, text, OSD rolling, logo
 Reset configuration button, firmware upgrade, remote maintenance
 Input: DVD player, STB, Camera etc ( HDMI)
 RTMP, HLS function.
三. Contact information
F:+86 (0)20-36164006 +86 (0)755 66808708
P: +8615602202570
E: Hansen@hwsxtec.com
Web: www.hwsxtec.com/?_l=en
Shop: www.hw-iptv-encoder.com
深圳海威视讯技术有限公司
Shenzhen Haiwei Vision Technology

Address: Shenzhen head office: 605~609 Building B, XinAn 6th Road, Baoan 82rd
District, Shenzhen, China
深圳宝安 82 区新安六路华丰金融港 B 座 605~609
Guangzhou: Room 403, Linglanduhui, NO18 Huaying road, Jiahe Wanggang,
Baiyun district, Guangzhou, China
广州白云区嘉禾望岗空港大道北华英路自编 18 号岭南都汇 403

Haiwei H8 4G WIFI+ Battery HDMI over ip encoder user manual

Recommended

Recommended

More Related Content

What's hot

What's hot (18)

Similar to Haiwei H8 4G WIFI+ Battery HDMI over ip encoder user manual

Similar to Haiwei H8 4G WIFI+ Battery HDMI over ip encoder user manual (20)

More from Hansen He

More from Hansen He (12)

Recently uploaded

Recently uploaded (20)

Haiwei H8 4G WIFI+ Battery HDMI over ip encoder user manual