BEST ✨ Call Girls In Noida Electronic City ✔️ 9871031762 ✔️ Escorts Service I...
PTP & ALU
1. Pharmaceutical Aluminum Foil
Contact name:Ms.Shirley Dai Skype:Shirley-Dai Mobile,wechat,whatsapp,viber: 0086-13951431978
Email:dlq@jerelpack.com QQ:1127545565
1) Alloy:8011 H18
2) Temper:Hard ,Soft
3) Width: 70-610mm( according customer requirements)
4) Thickness: 20-30micron( before coating)
5) Classification: Unprinted, printed
6) Coating thickness options:
a . 3-4gsm with tolerance of +/-0.5gsm 4-6gsm with tolerance of +/-0.5gsm
6-8gsm with tolerance of +/-0.5gsm standard, if not specified, heat sealing coating is 4 with a with tolerance of
+/-0.5gsm , both seal strength with PVC/PVDC 8N/25mm min.
b. primer lacquer or OP: 1 gsm/+-0.5
7) printing and lacquer coating: printed as per text, layout and shade approved by customer. for non-printed
specification, clear lacquer to be coated as a protective coating and good printability. Printing inks and lacquer
coating are capable to with standard 180deg. C for 1 sec. dwell time.and we could supply aluminium foil for printing
on both sides.
8 ) structure: HSL(bright side)/ALU FOIL/printing layer/OP(dull side)
HSL(bright side)/printing/ ALU FOIL/printing/OP(dull side)
HSL(dull side)/printing /ALU FOIL/OP(bright side)
HSL(bright side)/ALU FOIL/ OP(dull side)
HSL(dull side)/ALU FOIL/OP(bright side)
9)Diameter: core diameter:76mm, Out diameter: Max 240-280mm ( as your requirements)
10) Out packing: protected by plastic bag, foam, hard carton, wooden pallets,wrapping film.
11) Functions: High obstruction, Heat insulation, Air tightness, Printable, Breakable in slightly.
12) Characters: Our goods are almost no pinholes,with good heat sealing and coating ,clear and
beautiful surface printing
13) Applications: it can be applied to blister packing for capsules, pills,candies,chocolate, Chewing gum
and so on.
Photos:
2. Pharmaceutical ALU ALU FOIL
Contact name:Ms.Shirley Dai Skype:Shirley-Dai Mobile,wechat,whatsapp,viber: 0086-13951431978
Email:dlq@jerelpack.com QQ:1127545565
Structures :OPA/AL/PVC
Specification: width 70- 600mm,
Thickness: OPA25-30μm/AL50-65μm/PVC60μm.
Inner hole diameter:76mm,
Outer diameter:240mm
Roll length upon on client requirement.
Function: High obstruction,anti oxygenation,formal.
Characters:Our goods have high obstruction and prevent physic moisture, extensibility is good and not
easy to break,construct agglutination is strong and not easy to be layered,Adapt to whether changes
and prevent from light and anti oxygenation.
Application: used for high level pills ,tablets. it is the primary selection for high level physic packing
materials because of its special characters.
3. Pharmaceutical PVC or PVC/PVDC rigid film
Contact name:Ms.Shirley Dai Skype:Shirley-Dai Mobile,wechat,whatsapp,viber: 0086-13951431978
Email:dlq@jerelpack.com QQ:1127545565
Structures: PVC Rigid film,PVC/PVDC,PVC/PE/PVDC Rigid film
Specification: Width≤600mm
Thickness: 0.20mm-0.45mm,PVDC:40gsm,60gsm,90gsm
Inner hole diameter 76mm,
Outer roll diameter≤500mm
Functions: blister plastic ,easy molding and Heat sealing
Characters: Our goods have good transparency ,less bubbles, veins,and good molding,can heat seal
with ptp foil
Applications: it can be packed together with PTP aluminum for torches, pills, candies,chocolate,
Chewing gum and so on.