The document outlines the steps for grinding and polishing a concrete floor. It involves 4 grinding steps using progressively finer diamond grit pads with 2 passes each. This is followed by densification using chemicals that react with lime in the concrete to strengthen it. There are then 5 polishing steps using resin and twister pads with finer grits, from 400# to 5000#, with the final step being optional. Each polishing step involves 2 passes and produces a higher level of finish from bronze to gold to diamond.

2. Floor analysis

3. Grinding with Advanced Machines

4. Grinding steps
Sr.no Details No of passes
1 1st grinding with (25#diamond) 2 passes
2 2nd grinding with (40#diamond) 2 passes
3 3rd grinding with (80#diamond) 2 passes
4 4th grinding with (150#diamond) 2 passes

5. Densification
Densifying: Specially
formulated chemicals are
used to toughen the top
layer of the ground
concrete which react with
the available lime in a
pozzolanic fusion creating
additional cementations
material strengthening the
concrete by tightening the
pores.

6. Polishing steps
Sr.no Details Passes Finish
1 1st polish with (400# resin pad) 2 passes Bronze
2 2nd polish with (800# resin pad) 2 passes Bronze
3 3rd polish with (1500# resin pad) 2 passes Silver
4 4th Polish with (3000# resin pad) 2 passes Gold
5 5th polish with twister pads (5000+#Optional) 2 passes Diamond

10. Thanks For the Attention