This document provides specifications for GLC/GDC60VX and GLC/GDC70VX lift truck models, including capacities, component sizes, lubrication requirements, and torque specifications. It lists the lifting capacity, counterweight, tire sizes, fuel capacities, engine/transmission oils, hydraulic fluids, and electrical systems for the models. It also outlines relief pressures, stall speeds, tilt angles, mast creep rates, and engine details such as cylinders, power output, timing and valves. Torque specifications are provided for frames, masts, carriages and other components.
Yale (e879) glc135 vx lift truck service repair manualfjksekmdme
The document provides specifications for GLC/GDC60VX and GLC/GDC70VX lift truck models, including their lifting capacities, weights, tire sizes, fuel and fluid capacities, pressure specifications, and torque values. It lists the models' dimensions and performance data, such as tilt angles, mast creep rates, engine details, and transmission information. The document contains detailed technical information for servicing and maintaining these particular lift truck models.
Hyster s005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and counterweight weights for various models
- Tire sizes for different truck models
- Fuel, oil, and fluid capacities
- Electrical system specifications
- Transmission oil pressure specifications
- Instructions for removing the drive axle assembly, including draining fluids and disconnecting lines
Hyster u005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, electrical components, transmission oil pressures, hydraulic relief pressures, and steering details.
3) The document is a service manual containing technical specifications to aid in repair work for these lift truck models.
Hyster s005 (h80 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster u005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster k006 (h6.0 ft) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT and H7.0FT, including:
- Lift capacities of 6123kg and 7030kg respectively
- Tire sizes of 8.25x15 for both drive and steer tires
- Fluid capacities for fuel, engine oil, hydraulic oil, and other components
- Electrical system specifications including alternator outputs and battery details
- Transmission oil pressures and relief valves
- Steering system details like relief pressure and turning radius
- Instructions for removing the drive axle, draining fluids, and disconnecting brake and cooling lines.
Hyster r005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster l006 (h6.0 ft europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle, including draining fluids and disconnecting brake, cooling and driveline components.
Yale (e879) glc135 vx lift truck service repair manualfjksekmdme
The document provides specifications for GLC/GDC60VX and GLC/GDC70VX lift truck models, including their lifting capacities, weights, tire sizes, fuel and fluid capacities, pressure specifications, and torque values. It lists the models' dimensions and performance data, such as tilt angles, mast creep rates, engine details, and transmission information. The document contains detailed technical information for servicing and maintaining these particular lift truck models.
Hyster s005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and counterweight weights for various models
- Tire sizes for different truck models
- Fuel, oil, and fluid capacities
- Electrical system specifications
- Transmission oil pressure specifications
- Instructions for removing the drive axle assembly, including draining fluids and disconnecting lines
Hyster u005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, electrical components, transmission oil pressures, hydraulic relief pressures, and steering details.
3) The document is a service manual containing technical specifications to aid in repair work for these lift truck models.
Hyster s005 (h80 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster u005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster k006 (h6.0 ft) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT and H7.0FT, including:
- Lift capacities of 6123kg and 7030kg respectively
- Tire sizes of 8.25x15 for both drive and steer tires
- Fluid capacities for fuel, engine oil, hydraulic oil, and other components
- Electrical system specifications including alternator outputs and battery details
- Transmission oil pressures and relief valves
- Steering system details like relief pressure and turning radius
- Instructions for removing the drive axle, draining fluids, and disconnecting brake and cooling lines.
Hyster r005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster l006 (h6.0 ft europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle, including draining fluids and disconnecting brake, cooling and driveline components.
Hyster s005 (h90 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h120 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h90 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
The document is a service manual that outlines repair procedures and provides technical specifications to assist with maintenance and repairs for the specified Hyster lift truck models. It includes detailed tables, figures, and warnings for working on components like the drive axle, differential, brakes, and other parts
Hyster s005 (h110 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h110 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h90 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h100 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models ranging from H80FT to H120FT, including:
- Lifting capacities from 8,000 lbs to 12,000 lbs depending on the model
- Counterweight weights ranging from 4,647 lbs to 7,112 lbs
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Engine, transmission, hydraulic and electrical system specifications
The document is a service manual that outlines the repair procedures, component specifications, and pressures for systems like the transmission, hydraulics, and steering for the listed Hyster lift truck models.
Hyster s005 (h120 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h100 ft) forklift service repair manualfikdkksmmd
The document provides specifications for Hyster lift truck models H80FT through H120FT, including lifting capacities, tire sizes, fluid capacities, electrical systems, transmission pressures, and hydraulic relief pressures. Key specifications listed include lifting capacities ranging from 8,000 to 12,000 pounds depending on the model, various tire size options, fuel tank capacities of 79-100 liters, hydraulic oil tank capacities of 62-78 liters, and transmission oil pressures between 983-1482 kPa.
Hyster s005 (h110 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck drives and steers
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering specifications and turning radii for each model
The document is a service repair guide that lists detailed technical specifications to aid in maintenance and repairs for the specified Hyster lift truck models. It includes components like the drive axle, transmission, engine, hydraulics, and other systems.
Hyster s005 (h120 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models ranging from H80FT to H120FT, including:
- Lifting capacities from 8,000 lbs to 12,000 lbs depending on the model
- Counterweight weights ranging from 4,647 lbs to 7,112 lbs
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Engine, transmission, hydraulic and electrical system specifications
The document is a service manual that outlines the repair procedures, component specifications, and pressures for systems like the transmission, hydraulics, and steering for the listed Hyster lift truck models.
Hyster s005 (h80 ft) forklift service repair manualfikdkksmmd
The document provides specifications for Hyster lift truck models H80FT through H120FT, including lifting capacities, tire sizes, fluid capacities, electrical systems, transmission pressures, and hydraulic relief pressures. It lists the model number, weight, and counterweight for each lift truck. It also provides engine, transmission, hydraulic and electrical component specifications.
Hyster s005 (h100 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery/ignition specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds for various mast configurations
- General service repair instructions for drive axles
Hyster s005 (h80 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle for repair
Hyster l006 (h7.0 ft europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle, including draining fluids and removing mounting hardware
Hyster l006 (h6.0 ft europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle from the lift trucks
Hyster l006 (h6.0 ft europe) forklift service repair manualifjkdkkmmms
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle from the lift trucks
Hyster l006 (h7.0 ft europe) forklift service repair manualifjkdkkmmms
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle from the lift trucks
Hyster l006 (h7.0 ft europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities, weights, tire sizes, fuel and fluid capacities
- Engine oil, coolant, transmission oil, hydraulic oil, brake fluid specifications
- Electrical system components and specifications
- Transmission oil pressures
- Hydraulic and steering system relief pressures and components
- Instructions for removing the drive axle assembly, including draining fluids and disconnecting brake, cooling, and drive shaft components.
Hyster u005 (h120 ft) forklift service repair manualfikdkksmmd
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Troy bilt 700 series rider service repair manualfhjskemme
This document is a professional shop manual that provides instructions and guidance for trained technicians servicing and repairing MTD 700 series riding tractors. It covers a range of systems including the engine, steering, body panels, drive system, transaxle, electrical system, and more. Technicians are advised to follow all safety instructions and use common sense when working on equipment. The manual is intended as a supplemental reference and updates may be necessary.
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Workman MD and MDX utility vehicles. It includes safety instructions, maintenance procedures, specifications, and repair information for the vehicle's engine, drivetrain, electrical system, chassis, and other components. Technicians are directed to refer to additional manuals for specific engine and system details.
More Related Content
Similar to Yale (e879) gdc155 vx lift truck service repair manual
Hyster s005 (h90 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h120 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h90 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
The document is a service manual that outlines repair procedures and provides technical specifications to assist with maintenance and repairs for the specified Hyster lift truck models. It includes detailed tables, figures, and warnings for working on components like the drive axle, differential, brakes, and other parts
Hyster s005 (h110 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h110 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h90 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h100 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models ranging from H80FT to H120FT, including:
- Lifting capacities from 8,000 lbs to 12,000 lbs depending on the model
- Counterweight weights ranging from 4,647 lbs to 7,112 lbs
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Engine, transmission, hydraulic and electrical system specifications
The document is a service manual that outlines the repair procedures, component specifications, and pressures for systems like the transmission, hydraulics, and steering for the listed Hyster lift truck models.
Hyster s005 (h120 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h100 ft) forklift service repair manualfikdkksmmd
The document provides specifications for Hyster lift truck models H80FT through H120FT, including lifting capacities, tire sizes, fluid capacities, electrical systems, transmission pressures, and hydraulic relief pressures. Key specifications listed include lifting capacities ranging from 8,000 to 12,000 pounds depending on the model, various tire size options, fuel tank capacities of 79-100 liters, hydraulic oil tank capacities of 62-78 liters, and transmission oil pressures between 983-1482 kPa.
Hyster s005 (h110 ft) forklift service repair manualfikdkksmmd
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck drives and steers
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering specifications and turning radii for each model
The document is a service repair guide that lists detailed technical specifications to aid in maintenance and repairs for the specified Hyster lift truck models. It includes components like the drive axle, transmission, engine, hydraulics, and other systems.
Hyster s005 (h120 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models ranging from H80FT to H120FT, including:
- Lifting capacities from 8,000 lbs to 12,000 lbs depending on the model
- Counterweight weights ranging from 4,647 lbs to 7,112 lbs
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Engine, transmission, hydraulic and electrical system specifications
The document is a service manual that outlines the repair procedures, component specifications, and pressures for systems like the transmission, hydraulics, and steering for the listed Hyster lift truck models.
Hyster s005 (h80 ft) forklift service repair manualfikdkksmmd
The document provides specifications for Hyster lift truck models H80FT through H120FT, including lifting capacities, tire sizes, fluid capacities, electrical systems, transmission pressures, and hydraulic relief pressures. It lists the model number, weight, and counterweight for each lift truck. It also provides engine, transmission, hydraulic and electrical component specifications.
Hyster s005 (h100 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery/ignition specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds for various mast configurations
- General service repair instructions for drive axles
Hyster s005 (h80 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle for repair
Hyster l006 (h7.0 ft europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle, including draining fluids and removing mounting hardware
Hyster l006 (h6.0 ft europe) forklift service repair manualfujsefkskemm
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle from the lift trucks
Hyster l006 (h6.0 ft europe) forklift service repair manualifjkdkkmmms
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle from the lift trucks
Hyster l006 (h7.0 ft europe) forklift service repair manualifjkdkkmmms
This document provides specifications and service information for Hyster lift trucks models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle from the lift trucks
Hyster l006 (h7.0 ft europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities, weights, tire sizes, fuel and fluid capacities
- Engine oil, coolant, transmission oil, hydraulic oil, brake fluid specifications
- Electrical system components and specifications
- Transmission oil pressures
- Hydraulic and steering system relief pressures and components
- Instructions for removing the drive axle assembly, including draining fluids and disconnecting brake, cooling, and drive shaft components.
Hyster u005 (h120 ft) forklift service repair manualfikdkksmmd
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Similar to Yale (e879) gdc155 vx lift truck service repair manual (20)
Troy bilt 700 series rider service repair manualfhjskemme
This document is a professional shop manual that provides instructions and guidance for trained technicians servicing and repairing MTD 700 series riding tractors. It covers a range of systems including the engine, steering, body panels, drive system, transaxle, electrical system, and more. Technicians are advised to follow all safety instructions and use common sense when working on equipment. The manual is intended as a supplemental reference and updates may be necessary.
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Workman MD and MDX utility vehicles. It includes safety instructions, maintenance procedures, specifications, and repair information for the vehicle's engine, drivetrain, electrical system, chassis, and other components. Technicians are directed to refer to additional manuals for specific engine and system details.
The document is a service manual for the Workman MDE vehicle. It provides information to service technicians for troubleshooting, testing, and repairing major systems and components of the Workman MDE. It instructs technicians to refer to the operator's manual for operating, maintenance, and adjustment instructions. The manual contains several chapters covering safety, product records and maintenance, electrical systems, transaxles and brakes, chassis, and electrical diagrams. It provides specifications, troubleshooting guides, and procedures for servicing and repairing components.
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the Workman MD and MDX utility vehicles. It includes safety instructions, maintenance procedures, specifications, and repair information for the vehicle's engine, drivetrain, electrical system, chassis, and other components. Technicians are directed to refer to operator manuals for additional information.
This document provides torque specifications and conversion factors for fasteners used on ProCore deep tine aerators. Standard torque values are listed for dry, zinc plated steel fasteners in both inch and metric sizes for grades 1, 5, and 8. Lubricated fasteners should be torqued to 25% less. Product records and maintenance procedures can be found in the operator's manual inserted at the end.
This document provides torque specifications and conversion factors for fasteners used on ProCore deep tine aerators. Standard torque values are listed for dry, zinc plated steel fasteners in both inch and metric sizes for grades 1, 5, and 8. Lubricated fasteners should be torqued to 25% less. Product records and maintenance procedures can be found in the operator's manual inserted at the end.
Toro pro core sr70 s service repair manualfhjskemme
This document provides torque specifications and conversion factors for fasteners used on ProCore deep tine aerators. Standard torque values are listed for dry, zinc plated steel fasteners in both inch and metric sizes for Grades 1, 5, and 8 bolts as well as Classes 8.8 and 10.9 metric bolts. Reduced torque values are recommended for lubricated fasteners. Product records and maintenance procedures can be found in the operator's manual inserted at the end of the chapter.
This document provides torque specifications and conversion factors for fasteners used on ProCore deep tine aerators. Standard torque values are listed for dry, zinc plated steel fasteners in both inch and metric sizes for grades 1, 5, and 8. Lubricated fasteners should be torqued to 25% less. Product records and maintenance procedures can be found in the operator's manual inserted at the end.
Toro pro core sr54 s service repair manualfhjskemme
This document provides torque specifications and conversion factors for fasteners used on ProCore deep tine aerators. Standard torque values are listed for dry, zinc plated steel fasteners in both inch and metric sizes for grades 1, 5, and 8. Lubricated fasteners should be torqued to 25% less. Product records and maintenance procedures can be found in the operator's manual inserted at the end.
This document provides torque specifications and conversion factors for fasteners used on ProCore deep tine aerators. Standard torque values are listed for dry, zinc plated steel fasteners in both inch and metric sizes for grades 1, 5, and 8. Lubricated fasteners should be torqued to 25% less. Product records and maintenance procedures can be found in the operator's manual inserted at the end.
This document provides torque specifications and conversion factors for fasteners used on ProCore deep tine aerators. Standard torque values are listed for dry, zinc plated steel fasteners in both inch and metric sizes for Grades 1, 5, and 8 bolts as well as Classes 8.8 and 10.9 metric bolts. Reduced torque values are recommended for lubricated fasteners. Product records and maintenance procedures can be found in the operator's manual.
Toro pro core processor service repair manualfhjskemme
This service manual provides information to technicians for troubleshooting, testing, and repairing major systems and components of the ProCore Processor. It instructs technicians to refer to the operator's manual for operating instructions and maintenance. The manual includes chapters covering safety, product records and maintenance, the engine, hydraulic system, electrical system, chassis, and electrical diagrams. It is intended to help ensure the correct and safe operation of the ProCore Processor.
Toro groundsmaster 5910 service repair manualfhjskemme
This service manual provides information for troubleshooting, testing, and repairing major systems and components of the Groundsmaster 5900 and 5910 mowers. It contains chapters covering safety procedures, product records and maintenance, diesel engine systems, hydraulic systems, electrical systems, axles/brakes, chassis, cutting decks, operator cab, and foldout drawings. Technicians are instructed to follow safety procedures when jacking, servicing, or performing adjustments on the mower.
Toro groundsmaster 5900 service repair manualfhjskemme
This service manual provides information for troubleshooting, testing, and repairing major systems and components of the Groundsmaster 5900 and 5910 mowers. It contains chapters covering safety procedures, product records and maintenance, diesel engine systems, hydraulic systems, electrical systems, axles/brakes, chassis, cutting decks, operator cab, and foldout drawings. Technicians are instructed to follow safety procedures when jacking, servicing, or performing adjustments on the mower.
Toro groundsmaster 4300 d service repair manualfhjskemme
Here are the key steps for jacking the machine safely:
1. Park machine on a solid, level surface such as a concrete floor.
2. Remove any attachments that could interfere with safely raising the machine.
3. Chock or block the wheels to prevent rolling.
4. Use a jack and jack stands to support the raised machine. Do not rely on just the jack.
5. Position the jack and jack stands at designated lifting points to safely support the weight of the machine.
It is critical to follow these steps when raising the machine to change attachments, tires or perform other service under the machine. Properly supporting the machine is necessary to prevent it from moving or falling, which could
Toro groundsmaster 4110 d (model 30447) service repair manualfhjskemme
This document is a service manual for the Groundsmaster 4100-D and 4110-D. It contains chapters covering safety, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, cutting deck, operator cab, and foldout drawings. The safety chapter provides instructions for safe operation, maintenance, jacking, and contains safety and instruction decals. The document instructs technicians on troubleshooting, testing, adjusting and repairing major systems and components.
Toro groundsmaster 4100 d (model 30449) service repair manualfhjskemme
This document is a service manual for the Groundsmaster 4100-D and 4110-D. It contains chapters covering safety, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, cutting deck, operator cab, and foldout drawings. The safety chapter provides instructions for safe operation, maintenance, jacking, and contains safety and instruction decals. The document instructs technicians on troubleshooting, testing, adjusting and repairing major systems and components.
John deere ts and th 6x4 gator utility vehicle service repair manualfhjskemme
The document is a technical manual for a John Deere Gator utility vehicle. It provides an overview of the manual's contents and organization. The manual contains sections on specifications, component locations, schematics, theory of operation, diagnostics, testing, repair and safety information. It notes that the manual is intended for experienced technicians and contains model-specific information to support the total product. Safety warnings are provided throughout regarding handling fluids, batteries, pressurized lines, rotating parts, and other hazards.
John deere 790 compact utility tractor service repair manualfhjskemme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The document provides specifications, repair/removal instructions, and diagnostic information to assist technicians in servicing these tractor models. Safety messages are included throughout and components are organized by system for easy reference.
Clark c500, y350 forklift service repair manualfhjskemme
This document provides instructions and guidelines for performing planned maintenance (PM) on Clark lift trucks. It outlines the importance of regular inspections and recommends using a PM report form to document the inspections. Safety precautions are described, such as disconnecting the battery before working on electrical components. A visual inspection process is outlined to check for issues like leaks, loose or damaged parts, and worn components. Inspections of specific systems and components like the overhead guard, carriage, forks, and hydraulic and electrical systems are recommended. Records of inspections should be submitted to maintenance authorities.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. 8000 YRM 1572 Tire Sizes
Lift Truck Lifting Capacity
Model Weight
GLC/GDC60VX (GC/GLC/GDC0135VX) 6123 kg (13,500 lb)
GLC/GDC70VX (GC/GLC/GDC155VX) 7030 kg (15,500 lb)
NOTE: Load center at 600 mm (24 in.).
Counterweight Weights
Model Weight
GLC/GDC60VX, GLC/GDC70VX
(GC/GLC/GDC135VX, GC/GLC/GDC155VX)
2955 kg (6515 lb)
Tire Sizes
Truck Drive Tires Steer Tires
GLC/GDC60VX, GLC/GDC70VX
(GC/GLC/GDC135VX
GC/GLC/GDC155VX)
28 × 12 × 22 22 × 8 × 16
1
3. Capacities 8000 YRM 1572
Capacities
Table 1. GLC/GDC60VX, GLC/GDC70VX (GC/GLC/GDC135VX, GC/GLC/GDC155VX) (E879) Lift Truck Models
Item Quantity Specifications
Fuel Capacity
Gas 65.8 liter (17.4 gal) 87 Octane
LPG 38.6 liter (10.2 gal)
Empty
19.0 kg (41 lb)
Full
38.2 kg (84.51 lb)
LPG-HD 5, HD 10
Diesel 65.8 liter (17.4 gal) Diesel No. 2
Engine Oil
GM 4.3L 4.7 liter (5.0 qt) 7°C ( 20°F) and below
SAE 5W-20
16°C (60 °F) and below
SAE 5W-30
18°C (0°F) and above
SAE 10W-30
API SM
ILSAC GF4
SAE J2362
Kubota 3.8L Diesel 13.2 liter (13.9 qt) -15°C (5°F) and above
SAE 15W-40
API CF or CI-4
25°C ( 13°F) and above
SAE 10W-30
Below 25°C ( 13°F)
SAE 5W-20
2
4. 8000 YRM 1572 Capacities
Table 1. GLC/GDC60VX, GLC/GDC70VX (GC/GLC/GDC135VX, GC/GLC/GDC155VX)
(E879) Lift Truck Models (Continued)
Item Quantity Specifications
Cooling System
GM 4.3L 15.1 liter (15.9 qt)
CAUTION
Additives may damage the
cooling system. Before us-
ing additives, contact your
local Yale dealer.
Use Ethylene Glycol Boron-free
Antifreeze. Purchase a
pre-diluted 50/50 solution; or
mix 50% concentrate with 50%
distilled water or deionized
water.
Kubota 3.8L Diesel 10.6 liter (11.2 qt)
CAUTION
Additives may damage the
cooling system. Before us-
ing additives, contact your
local Yale dealer.
Use Ethylene Glycol Boron-free
Antifreeze. Purchase a
pre-diluted 50/50 solution; or
mix 50% concentrate with 50%
distilled water or deionized
water.
Hydraulic Tank Oil Capacity
All Trucks 64.7 liter (68.4 qt)
CAUTION
Additives may damage the
hydraulic system. Before us-
ing additives, contact your
local Yale dealer.
ISO VG-46 Hydraulic Oil
15°C (5°F) and above
Transmission Oil Capacity
Standard Powershift Transmission
(2-Speed)
24 liter (25.4 qt) John Deere
JDM J20C
Techtronix 332 (3-Speed) 24 liter (25.2 qt) John Deere
JDM J20C
3
5. Electrical System 8000 YRM 1572
Table 1. GLC/GDC60VX, GLC/GDC70VX (GC/GLC/GDC135VX, GC/GLC/GDC155VX)
(E879) Lift Truck Models (Continued)
Item Quantity Specifications
Wet Brake Drive Axle Oil Capacities
Drive Axle Housing Arm Oil
Right Chamber
8.8 liter (9.3 qt) John Deere
JDM J20C
Drive Axle Housing Arm Oil
Left Chamber
8.8 liter (9.3 qt) John Deere
JDM J20C
Right Wheel Hub Oil 1.6 liter (1.7 qt) John Deere
JDM J20C
Left Wheel Hub Oil 1.6 liter (1.7 qt) John Deere
JDM J20C
Brake Oil (Master Cylinder)
All Lift Truck Models 0.35 liter (0.74 pt)
WARNING
DO NOT use DOT fluid; only
use Dexron III oil from sealed
container to prevent possible
damage to the brake system.
Failure to observe the above
Warning could result in death
or serious injury.
Dexron III From Sealed
Container
Wet Brake Center Section Oil
All Lift Truck Models 4.2 liter (4.4 qt) SAE 80W-90
Electrical System
Table 2. GLC/GDC60VX, GLC/GDC70VX (GC/GLC/GDC135VX, GC/GLC/GDC155VX) (E879) Lift Truck Models
Item GM 4.3L Kubota 3.8L
Battery 12-volt, negative ground 12-volt, negative ground
Spark Plugs AC 41-993 N/A
Spark Plug Gap 1.5 mm (0.059 in.) N/A
Ignition Timing
Gas Not Adjustable N/A
LPG Not Adjustable N/A
Diesel N/A Not Adjustable
4
6. 8000 YRM 1572 Transmission Oil Pressures
GM 4.3L
Alternator Output (14 Volts) G and LPG GS and LPS
Idle 50 amps @ 750 rpm 38 amps @ 750 rpm
Governed Speed 65 amps @ 2400 rpm 45 amps @ 2400 rpm
Kubota Diesel
Alternator Output (13.5 Volts) D DS
Low Idle 30 amps @ 825 rpm Not Offered
Governed Speed 80 amps @ 2325 rpm Not Offered
Transmission Oil Pressures
Table 3. 3-Speed Transmission
All Pressures at 2000 rpm and Oil at 50 to 65°C (120 to 150°F)
Port 1
Transmission Pump
Port 2 Port 3 Port 4 Port 5 Port 6 Port 7 Port 8
Low and High
Pressure
Reverse
Clutch
(R1 and
R2)
Forward
Low
Clutch
(F1 and
F2)
Forward
High
Clutch
(F3)
Torque
Con-
verter
Lubrication
First Test
Port
(F1 and R1)
Second Test
Port
(F2, F3 and
R2)
1793 to 2068* kPa
(260 to 300 psi)
1793 to
2068 kPa
(260 to
300 psi)
1793 to
2068 kPa
(260 to
300 psi)
1793 to
2068 kPa
(260 to
300 psi)
758 kPa
(110 psi)
69 to 276 kPa
(10 to 40 psi)
1793 to
2068 kPa
(260 to
300 psi)
1793 to
2068 kPa
(260 to
300 psi)
*Relief Pressure
5
7. Hydraulic System Relief Pressures 8000 YRM 1572
Table 4. 2-Speed Transmission
All Pressures at 2000 rpm and Oil at 50 to 65°C (120 to 150°F)
Port 1
Transmission Pump
Port 2 Port 3 Port 4 Port 5 Port 6 Port 7 Port 8
Low and High
Pressure
Reverse
Clutch
(R1 and
R2)
Forward
Low
Clutch
(F1 and
F2)
Forward
High
Clutch
(F3)
Torque
Con-
verter
Lubrication
First Test
Port
(F1 and R1)
Second Test
Port
(F2, F3 and
R2)
1793 to 2068* kPa
(260 to 300 psi)
1793 to
2068 kPa
(260 to
300 psi)
1793 to
2068 kPa
(260 to
300 psi)
1793 to
2068 kPa
(260 to
300 psi)
758 kPa
(110 psi)
69 to 276 kPa
(10 to 40 psi)
1793 to
2068 kPa
(260 to
300 psi)
1793 to
2068 kPa
(260 to
300 psi)
*Relief Pressure
Hydraulic System Relief Pressures
Item Specification
Oil Temperature for Setting Relief Pressure 50 to 65°C (122 to 149°F)
Primary Relief Valve Pressure (High Idle) 21.4 ±0.48 MPa (3104 ± 70 psi)
Secondary Relief Valve Pressure
(High Idle)
15.51 ±0.48 MPa (2250 ±70 psi)
6
8. 8000 YRM 1572 Stall Speeds (in RPM ±100 rpm)
Steering System
Table 5. GLC/GDC60VX, GLC/GDC70VX (GC/GLC/GDC135VX, GC/GLC/GDC155VX) (E879) Lift Truck Models
Item Quantity
Oil Temperature for Setting Relief Pressure 50 to 65°C (122 to 149°F)
Steering Relief Pressure at 800 rpms 12.4 ±0.3 MPa (1798 ±43.5 psi)
Steering Cylinder Stroke (Each Side) 210.8 mm (8.3 in.)
Inside Steering Tire Angle 80.3°
Number of Turns to Lock 4.07
Turning Radius
(±76 mm NO LOAD)
Outside Inside
All Trucks 2585 107
Stall Speeds (in RPM ±100 rpm)
GM 4.3L GAS
Transmission New Engine Broken-In Engine
(30 hrs)
Standard Powershift 2160 2210
Techtronix 332 N/A* N/A*
*Techtronix 332 transmission has torque limiting feature.
GM 4.3L LPG
Transmission New Engine Broken-In Engine
(30 hrs)
Standard Powershift 2070 2170
Techtronix 332 N/A* N/A*
*Techtronix 332 transmission has torque limiting feature.
KUBOTA DIESEL
Transmission New Engine Broken-In Engine
(30 hrs)
Standard Powershift 1900 2050
Techtronix 332 N/A* N/A*
*Techtronix 332 transmission has torque limiting feature.
7
9. Engine Specifications 8000 YRM 1572
Tilt Angles
Lift truck should be on level ground and in unloaded condition.
Table 6. GLC/GDC60VX, GLC/GDC70VX (GC/GLC/GDC135VX, GC/GLC/GDC155VX) (E879) Lift Truck Models
Mast Type Forward Tolerance Back Tolerance
2-Stage FFL,
3-Stage FFL,
3-Stage LFL
6° +1°, 0.5° 6° +0°, 0.5°
2-Stage LFL 6° +1°, 0.5° 10° +0°, 0.5°
Front End Equipment - Mast Creep
MAST CREEP
Measure with rated load at 2.5 m (8.0 ft) high and with
the lift, tilt, and auxiliary control levers in neutral posi-
tion.
NOTE: Mast should be 90° vertical prior to test.
Table 7. GLC/GDC60VX, GLC/GDC70VX (GC/GLC/GDC135VX, GC/GLC/GDC155VX) (E879) Lift Truck Models
Maximum Tilt Creep
Hydraulic Oil Temperature
Maximum Vertical Creep
at Carriage Mast Angle Cylinder Stroke
°C °F mm/Min in./Min °/Min mm/Min in./Min
20 68 2.2 0.086 0.11 1.24 0.054
25 77 3.0 0.118 0.15 1.69 0.067
30 86 3.3 0.130 0.16 1.80 0.071
35 95 5.1 0.201 0.25 2.83 0.111
40 104 6.3 0.247 0.31 3.50 0.137
45 113 8.1 0.319 0.40 4.52 0.178
50 122 10.0 0.394 0.50 5.62 0.221
55 131 12.1 0.476 0.61 6.89 0.271
60 140 14.6 0.575 0.73 8.20 0.323
Engine Specifications
Item GM 4.3L
No. of Cylinders 6
Firing Order 1-6-5-4-3-2
Bore 101.6 mm (3.9 in.)
Stroke 88.4 mm
(3.48 in.)
8
10. 8000 YRM 1572 Engine Specifications
Item GM 4.3L
Displacement 4.3 liter (262.4 in.3
)
Horsepower (Gasoline) 100 @ 2400 rpm
Horsepower (LPG) 93 @ 2400 rpm
Engine Timing Timing is controlled by the Electronic Con-
trol Module (ECM)
Compression Ratio
Gas 9.4:1
LPG 9.4:1
Oil Pressure With PSI Installed 124 kPa (18 psi)
@ 2000 80°C (176°F)
Valve Clearance
Intake Not Adjustable
Exhaust Not Adjustable
Idle Speed - Gas 750 ±25 rpm
Idle Speed - LPG 750 ±25 rpm
Governed Speed High Idle (No Load) 2400 ±25 rpm
Thermostat Range
STARTS TO OPEN 82 ±1.5°C (180 ±35°F)
FULL OPEN 128 ±1.5°C (260 ±35°F)
Cooling System Pressure 103 kPa (15 psi)
Item Kubota 3.8L
No. of Cylinders 4
Firing Order 1-3-4-2
Bore and Stroke 100 mm × 120 mm
(3.94 in. × 4.72 in.)
Displacement 3769 cc
Compression Ratio 17.5:1
Horsepower/rpm 73 @ 2325 rpm
Oil Pressure 50 kPa (7 psi)
Valve Clearance
Intake 0.23 to 0.27 mm (0.009 to 0.011 in.)
(COLD)
Exhaust 0.23 to 0.27 mm (0.009 to 0.011 in.)
(COLD)
Idle Speed (Operating Temperature > 15°C (89°F)) 800 ±50 rpm
9
11. Torque Specifications 8000 YRM 1572
Item Kubota 3.8L
Governed Speed High Idle (No Load) 2230 ±50 rpm
Thermostat Range
STARTS TO OPEN 75°C (167°F)
FULL OPEN 90°C (194°F)
Cooling System Pressure 103 kPa (15 psi)
Torque Specifications
FRAME
Overhead Guard Mount Capscrews
66 N•m (49 lbf ft)
Cowl-to-Overhead Guard Legs
66 N•m (49 lbf ft)
Steering Column Nut
40 to 54 N•m (30 to 40 lbf ft)
Counterweight Capscrews
1020 N•m (750 lbf ft)
MAST
Mast Mounting Capscrews
Mast to Drive Axle 320 N•m (236 lbf ft)
Tilt/Cylinder Adjust 90 N•m (66 lbf ft)
Pivot Pin Retainer 68 N•m (50 lbf ft)
Chain Anchor Nut
370 N•m (273 lbf ft)
Integral Sideshift Carriage Lower Hooks Capscrews
78 N•m (58 lbf ft)
Hang On Sideshift Assembly Lower
Hook Capscrews
155 to 170 N•m (115 to 125 lbf ft)
Fork Positioner Installation Capscrews
155 to 170 N•m (115 to 125 lbf ft)
Load Backrest to Carriage Assembly Nuts
(Without Fork Positioner)
70 to 80 N•m (56 to 60 lbf ft)
HANG ON SIDESHIFT CARRIAGE
WITH FORK POSITIONER, LIFT TRUCK
MODELS GLC/GDC60VX, GLC/GDC70VX
(GC/GLC/GDC135VX, GC/GLC/GDC155VX)
(E879) MANUFACTURED AFTER AUGUST,
2012
Fork Carrier Block Capscrews
80 N•m (60 lbf ft)
Retainer Capscrew
100 N•m (75 lbf ft)
Cylinder Retainer
65 N•m (120 lbf ft)
Hang On Sideshift Assembly Lower
Hook Capscrews
320 N•m (236 lbf ft)
Fork Positioner Frame to Hang On Sideshift
Frame Capscrews
145 N•m (110 lbf ft)
Fork Positioner to Sideshift Frame Capscrews
225 N•m (166 lbf ft)
Side Retainer to Fork Carrier Capscrews
80 N•m (60 lbf ft)
Lift Chain Anchor Nuts
210 N•m (155 lbf ft)
Load Backrest to Carriage Assembly Capscrews
225 N•m (166 lbf ft)
STEERING SYSTEM
Hub Nut (Slotted Nut)
203 N•m (150 lbf ft) initial
35 N•m (26 lbf in) final
Steering Axle Mounting Bolts and Nuts
250 to 275 N•m (184 to 203 lbf ft)
Spindle Bearing Cap Capscrew
52 N•m (38 lbf ft)
10
12. 8000 YRM 1572 Torque Specifications
Steering Cylinder Mounting Bolts
225 N•m (166 lbf ft)
TRANSMISSION
Transmission Mounting Bracket to Differential
Housing Capscrew
225 to 255 N•m (166 to 188 lbf ft)
Torque Converter Housing to Transmission
Case Capscrews
38 N•m (28 lbf ft)
Torque Converter Access Bolts
55 N•m (41 lbf ft)
Drive Shaft to Output Yoke Capscrews
55 to 63 N•m (41 to 47 lbf ft)
Control Valve Mounting Capscrews
20 to 25 N•m (15 to 18 lbf ft)
Engine Mounting Bracket to Frame Bolts
320 N•m (236 lbf ft)
ENGINE - GM 4.3L
Alternator Pulley
58 to 79 N•m (43 to 58 lbf ft)
Balance Shaft Gear Capscrew
20 N•m (177 lbf in) Plus 35 Degrees
Balance Shaft Retainer Capscrews
12 N•m (106 lbf in)
Camshaft Position Sensor
4 to 5 N•m (35 to 44 lbf in)
Camshaft Retainer Screws
12 N•m (106 lbf in)
Camshaft Sprocket Capscrews
28 N•m (21 lbf ft)
Camshaft Sprocket Nut
25 N•m (18 lbf ft)
Chain Control Block for Hydraulic Pump Drive
19 N•m (168 lbf in) with Adhesive Sealant
Connecting Rod Cap
27 N•m (240 lbf in)
After this step, tighten nuts an additional 70 degrees.
Coolant Pump to Engine Block
41 N•m (30 lbf ft)
Coolant Temperature Sensor
16 to 23 N•m (12 to 17 lbf ft)
Cooling Fan to Pulley
24 N•m (212 lbf in)
Cylinder Head
See the section for torque value and tightening
sequence to use.
Distributor Mount Capscrew
25 N•m (18 lbf ft)
Exhaust Manifold
15 N•m (133 lbf in) - first step
30 N•m (22 lbf ft) - second step
Flywheel
100 N•m (74 lbf ft)
Flywheel Housing
48 N•m (35 lbf ft)
Inlet Manifold to Cylinder Head
3 N•m (27 lbf in) - first step
12 N•m (106 lbf ft) - second step
15 N•m (133 lbf in) - third step (final)
Main Bearing Cap
105 N•m (77 lbf ft)
Motor Mount to Engine
31 N•m (23 lbf ft)
Oil Pump Cover
12 N•m (106 lbf in)
Oil Pump to Crankcase
90 N•m (66 lbf ft)
Oil Pressure Switch
15 to 19 N•m (11 to 14 lbf ft)
Oil Screen Support to Crankcase
50 N•m (37 lbf ft)
Oil Pan to Crankcase
Capscrews 25 N•m (18 lbf ft)
Nuts 25 N•m (18 lbf ft)
Rear Oil Seal Retainer Screws and Nut
15 N•m (133 lbf in)
Rocker Arm Cover
12 N•m (106 lbf in)
Rocker Arm Nuts
25 N•m (18 lbf ft)
11
13. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
14. Torque Specifications 8000 YRM 1572
Rocker Arm Studs
47 N•m (35 lbf ft)
Rocker Arm Bolts
30 N•m (22 lbf ft)
Thermostat Housing
25 N•m (18 lbf ft)
Timing Cover
12 N•m (106 lbf in)
Valve Lifter Retainer Capscrews
16 N•m (142 lbf in)
Vibration Damper
95 N•m (70 lbf ft)
ENGINE - KUBOTA 3.8L DIESEL
Alternator Pulley
58.4 to 78.9 N•m (43.1 to 58.2 lbf ft)
B Terminal Starter Nut
9.8 to 11 N•m (86.7 to 97.4 lbf in)
Camshaft Position Sensor Mounting Screw
4 to 5 N•m (35 to 44 lbf in)
Camshaft Pulsar Gear Mounting Screw
4.7 to 5.6 N•m (41.6 to 49.6 lbf in)
Camshaft to Cylinder Head Setscrew
24 to 27 N•m (18 to 20 lbf ft)
Common Fuel Rail Mounting Bracket Screw
24 to 27 N•m (18 to 20 lbf ft)
Connecting Rod Cap Screw
79 to 83 N•m (58 to 61 lbf ft)
Coolant Temperature Sensor Mounting Screw
16 to 23 N•m (12 to 17 lbf ft)
Crankshaft Position Sensor Mounting Screw
4 to 5 N•m (35 to 44 lbf in)
Crankshaft Pulley Mounting Screw
255 to 274 N•m (188 to 202 lbf ft)
Crankcase Housing to Engine Block
Mounting Screw
49 to 55 N•m (37 to 41 lbf ft)
Cylinder Head Mounting Screw
98 to 107 N•m (72.4 to 79.5 lbf ft)
Cylinder Head Valve Cover, Upper
6.9 to 11.2 N•m (61 to 99 lbf in)
Cylinder Head Cover, Lower
9.8 to 11.2 N•m (87 to 99 lbf ft)
Engine Oil Pressure Switch Mounting Screw
15 to 19 N•m (11 to 14 lbf ft)
Flywheel Housing Mounting Screw
78 to 90 N•m (58 to 66 lbf ft)
Flywheel Mounting Screw
98 to 107 N•m (72.4 to 79.5 lbf ft)
Fuel Injection Pump Gear Cover Mounting Screw
24 to 27 N•m (18 to 20 lbf ft)
Fuel Injection Pump Gear Mounting Nut
24 to 27 N•m (18 to 20 lbf ft)
Fuel Injection Harness Terminal Nut
1.6 to 2.2 N•m (14 to 19.5 lbf in)
Fuel Injection Line Clamp Nut
24 to 27 N•m (18 to 20 lbf ft)
Fuel Injection Pipe to Cylinder Head Retainer Nut
23 to 36 N•m (17 to 26 lbf ft)
Fuel Injection Overflow Pipe to Cylinder
Head Joint Screw
7.9 to 12 N•m (69.9 to 106 lbf in)
Fuel Injection Overflow Pipe To Injection
Pump Joint Screw
16 to 19 N•m (12 to 14 lbf ft)
Fuel Injection Pump Mounting Nut
27 to 27 N•m (18 to 20 lbf ft)
Intake Air Temperature Sensor
30 to 39 N•m (22 to 28 lbf ft)
Main Bearing Cap Mounting Screw
138 to 147 N•m (102 to 108 lbf ft)
12
15. 1600 YRM 1133 General
General
This section has the description and repair procedures
for the steering axle.
The steering axle assembly includes an axle frame,
steering cylinder, and two spindle and hub assemblies.
See Figure 1. The steering axle is articulated and is
connected to the frame by center pivot mounts. The
center pivot mounts permit the steering axle to move in
the frame mount when the lift truck travels over rough
surfaces.
The end caps of the steering cylinder are also the
mounts for the cylinder and are held to the shell by
the mount capscrews. There are O-rings, seals, and
wipers in the end caps to seal the caps to the shell
and rod. The ends of the piston rod extend from both
ends of the cylinder. A single piston and the seal are at
the center of the rod. Oil pressure on one side of the
piston moves the piston in the bore. The piston pushes
an equal amount of oil from the opposite side of the
cylinder.
1
16. General 1600 YRM 1133
A. CUSHION TRUCKS ONLY B. PNEUMATIC TRUCKS ONLY
1. AXLE FRAME
2. MOUNT
3. BRACKET
4. STEERING CYLINDER
5. TIE ROD
6. SPINDLE
7. MOUNT
8. HUB ASSEMBLIES
Figure 1. Steering Axle
2
17. 1600 YRM 1133 Steering Axle Assembly Repair
When the piston reaches the end of the stroke, a re-
lief valve in the steering circuit controls the oil pressure.
The tie rods that connect the spindle arms to the cylin-
der are not adjustable.
Each spindle turns on two tapered roller bearings in
mounts in the axle frame. The preload on the bearings
is controlled by shims at the lower bearing cap.
The wheels rotate on two tapered roller bearings and
are held on the spindles by a castle nut. The bearing
preload of the wheels is adjusted by the castle nut. The
grease seals protect the bearings from dirt and water.
Wear sleeves protect the hub from wear by the seals.
Steering Axle Assembly Repair
REMOVE
WARNING
PUTTING THE LIFT TRUCK ON BLOCKS
The lift truck must be put on blocks for some
types of maintenance and repair. The removal
of the mast, drive axle, battery, or counterweight
assemblies will cause large changes in the center
of gravity. When the lift truck is put on blocks, put
additional blocks in the following positions:
• If the mast and drive axle are removed, put blocks
under the counterweight so the lift truck cannot
fall backward.
• If the counterweight is removed, put blocks under
the mast so that the lift truck cannot fall forward.
Put the lift truck on blocks on a solid, even, and
level surface. Verify the blocks or stands have
enough capacity to hold the lift truck. Use ad-
ditional blocks next to the tires as necessary to
prevent movement of the lift truck. Verify the lifting
devices used during repairs can lift the weight of
the parts and assemblies.
See the Operating Manual or Periodic Maintenance
section for your lift truck model, for the procedures
to put the lift truck on blocks.
The steering axle can be removed without removing the
counterweight.
1. Verify wheels are set for straight travel. Put lift truck
on blocks so the steering axle will have enough
clearance to be removed. The top of the axle frame
must have clearance under the bottom of the frame
at the rear of the lift truck.
2. Disconnect hydraulic lines at steering cylinder. In-
stall plug fittings in cylinder and put caps on hy-
draulic lines. Plug fittings will prevent spindles from
turning as axle is removed from under the lift truck.
NOTE: Steering Axle Assembly may be mounted to the
frame with brackets or plates.
3. Slide floor jack or forks of another lift truck under
steering axle. Raise lifting device until it holds the
weight of the axle assembly.
a. To remove bracket type mounts, remove four
capscrews and nuts that fasten two brackets
under rubber mounts.
See Figure 2 for lift truck model
• GLC20-35VX (GC/GLC040-070VX,
GC/GLC055SVX) (A910)
See Figure 3 for lift truck models
• GLP/GDP20-35VX (GP/GLP/GDP040-
070VX) (B875)
See Figure 5 for lift truck model
• GLC40, 45, 55VX; GLC55SVX;
(GC/GLC080, 100, 120VX; GC/GLC080,
100VXBCS; GC/GLC120SVX;
GC/GLC120VXPRS) (E818, F818)
See Figure 6 for lift truck models
• GLP/GDP40VX5/VX6; GLP/GDP45SVX5,
GLP/GDP45VX6; GLP/GDP50-55VX
(GP/GLP/GDP080, 090, 100, 110, 120VX)
(F813, G813, H813, J813)
b. To remove plate type mounts, remove four cap-
screws and washers from two plates.
See Figure 4 for lift truck models
• GC/GLC030-035VX, GC/GLC040SVX
(C809)
• GLP/GDP16-18VX, GLP/GDP20SVX
(GP/GLP/GDP030-035VX, GP/GLP/
GDP040SVX) (C810)
3
18. Steering Axle Assembly Repair 1600 YRM 1133
See Figure 7 for lift truck models
• GLC/GDC60VX, GLC/GDC70VX, (GC/GLC/
GDC135VX, GC/GLC/GDC155VX) (C879,
D879, E879, F879)
See Figure 8 for lift truck models
• GLP/GDP60VX, GLP/GDP70VX (GP/GLP/
GDP135VX, GP/GLP/GDP155VX) (C878,
D878, E878)
• GLP/GDP80VX, GLP/GDP80VX9,
GLP/GDP90VX (GLP/GDP170VX,
GLP/GDP170VX36, GLP/GDP190VX)
(A909, B909)
c. Remove plates and slowly lower steering axle
assembly onto wheels. Carefully roll steering
axle assembly away from lift truck.
DISASSEMBLE
1. Remove ring seal, shims, flange, stub shaft and
bushing from steering axle assembly for lift truck
models below.
See Figure 8 for lift truck models
• GLP/GDP60VX, GLP/GDP70VX (GP/GLP/
GDP135VX, GP/GLP/GDP155VX) (C878, D878,
E878)
• GLP/GDP80VX, GLP/GDP80VX9,
GLP/GDP90VX (GLP/GDP170VX,
GLP/GDP170VX36, GLP/GDP190VX) (A909,
B909)
2. Put axle on blocks so the wheels just touch the floor.
Remove hub cap. Remove cotter pin, washer, and
castle nut. Remove bearing cone and discard cot-
ter pin.
NOTE: Identify and tag the outer and inner bearing
cones so they can be reassembled in their original
locations.
NOTE: The wear ring may not be present on all steering
axles.
3. Slide wheel from spindle. Remove inner bearing
cone, wear ring, and oil seal from spindle.
See Figure 2 for lift truck model
• GLC20-35VX (GC/GLC040-070VX,
GC/GLC055SVX) (A910)
See Figure 3 for lift truck model
• GLP/GDP20-35VX (GP/GLP/GDP040-070VX)
(B875)
See Figure 4 for lift truck models
• GC/GLC030-035VX, GC/GLC040SVX (C809)
• GLP/GDP16-18VX, GLP/GDP20SVX (GP/GLP/
GDP030-035VX, GP/GLP/GDP040SVX) (C810)
See Figure 5 for lift truck model
• GLC40, 45, 55VX; GLC55SVX; (GC/GLC080,
100, 120VX; GC/GLC080, 100VXBCS;
GC/GLC120SVX; GC/GLC120VXPRS) (E818,
F818)
See Figure 6 for lift truck models
• GLP/GDP40VX5/VX6; GLP/GDP45SVX5,
GLP/GDP45VX6; GLP/GDP50-55VX (GP/GLP/
GDP080, 090, 100, 110, 120VX) (F813, G813,
H813, J813)
See Figure 7 for lift truck models
• GLC/GDC60VX, GLC/GDC70VX, (GC/GLC/
GDC135VX, GC/GLC/GDC155VX) (C879, D879,
E879, F879)
See Figure 8 for lift truck models
• GLP/GDP60VX, GLP/GDP70VX (GP/GLP/
GDP135VX, GP/GLP/GDP155VX) (C878, D878,
E878)
• GLP/GDP80VX, GLP/GDP80VX9,
GLP/GDP90VX (GLP/GDP170VX,
GLP/GDP170VX36, GLP/GDP190VX) (A909,
B909)
NOTE: If the bearing is replaced, then the associated
bearing cup must be replaced also.
4. If the bearings must be replaced, use a brass drift
pin to remove the bearing cups and wear ring.
5. Repeat Step 1 through Step 4 for the other wheel.
4
19. 1600 YRM 1133 Steering Axle Assembly Repair
1. MOUNT
2. STEER AXLE ASSEMBLY
3. MOUNT
4. PLATE
5. WASHER
6. LOCK NUT
7. CAPSCREW
8. STEERING CYLINDER ROD
9. LUBRICATION FITTING
10. COTTER PIN
11. OIL SEAL
12. WEAR RING
13. BEARING CONE
14. BEARING CUP
15. WASHER
16. CASTLE NUT
17. HUB CAP
18. STEERING CYLINDER
Figure 2. Spindle to Tie Rod Assembly for Lift Truck Models GLC20-35VX (GC/GLC040-070VX,
GC/GLC055SVX) (A910)
5
20. Steering Axle Assembly Repair 1600 YRM 1133
1. MOUNT
2. STEERING AXLE ASSEMBLY
3. MOUNT
4. BRACKET
5. NUT
6. WASHER
7. WASHER
8. CAPSCREW
9. STEERING CYLINDER ROD
10. LUBRICATION FITTING
11. OIL SEAL
12. WEAR RING
13. BEARING CONE
14. BEARING CUP
15. HUB
16. BEARING CUP
17. BEARING CONE
18. CASTLE NUT
19. HUB CAP
20. COTTER PIN
21. STEERING CYLINDER
Figure 3. Spindle to Tie Rod Assembly for Lift Truck Models GLP/GDP20-35VX (GP/GLP/GDP040-070VX)
(B875)
6