This document provides a summary of the service manual contents for a lift truck. It includes 3 sentences or less summaries of sections on the frame, operator module repair, hood and side cover repair, and overhead guard repair. Procedures are provided for removing and installing major components like the operator module, hood, and overhead guard. Details are also given on adjusting the hood latch and replacing LED backup and brake lights.
Yale e187 glc040 065 rg-tg-zg lift truck service repair manualfjskkdmmmse
This document provides a service manual for GC/GLC040-065RG/TG/ZG (E187) lift trucks. It contains sections on various parts and systems of the lift truck, including the frame, engines, fuel systems, transmission, axles, steering, brakes, hydraulics, electrical systems, mast, and maintenance procedures. The document provides descriptions, removal and installation instructions, and repair procedures for components like the operator module, hood, overhead guard, counterweight, and LED lights. Safety warnings are included about putting the lift truck on blocks for maintenance and not operating it without the overhead guard correctly installed.
Yale e187 gc040 065 rg-tg-zg lift truck service repair manualfskkkdjskemd
This document provides a service manual for GC/GLC040-065RG/TG/ZG (E187) lift trucks. It contains sections on various parts and systems of the lift truck, including the frame, engines, fuel systems, transmission, axles, steering, brakes, hydraulics, electrical systems, mast, and maintenance procedures. The document provides descriptions of components and repair procedures for the operator module, hood and side covers, overhead guard, and counterweight. Safety warnings are provided for when putting the lift truck on blocks for maintenance.
This document is a service manual for MerCruiser GM 4 cylinder 181 cid (3.0L) marine engines. It provides information on engine components, maintenance procedures, troubleshooting, removal and installation of engine systems, and specifications. Safety notices are included throughout to warn technicians of hazards.
Kubota v3300 e2 b diesel engine service repair manualfusjejkdkmse
This workshop manual provides information on servicing the V3300-E2B and V3300-T-E2B diesel engines. It is divided into three parts: General, Mechanism, and Servicing. The General section includes engine identification, general precautions, maintenance checklists, and check and maintenance procedures. The Mechanism section describes the engine construction and functions. The Servicing section covers troubleshooting, specifications, torque values, adjustments, disassembly/assembly procedures, and servicing. The manual is intended to inform service personnel about servicing and maintaining these engines.
Bomag bw138 ac single tandem vibratory roller service repair manualpfiskdmjekm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 125 ADH, BW 135 AD, BW 138 AD, BW 138 AC. It includes technical specifications, safety information, descriptions of controls, operating procedures, maintenance schedules and procedures, and troubleshooting tips. The document is intended for operators and maintenance personnel and aims to ensure safe and proper use of the machines.
John deere f911 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. The manual contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. It includes specifications, component locations, theory of operation, diagnosis procedures, and repair instructions. Technicians should follow all safety instructions when working on the mowers.
Hyundai 50 df 7 forklift truck service repair manualfusjejkdkmse
This document provides an overview and table of contents for a service manual. It outlines the general safety information covered in Section 1 and describes the procedures for removal, installation, and repair covered in Sections 2 through 8. These sections address the power train system, brake system, steering system, hydraulic system, electrical system, and mast. The document also provides directions for how to read and organize the service manual.
JCB 525-58 TELESCOPIC HANDLER Service Repair Manual ALL:561001 Onwardssjehfd ksejfm
This is the Highly Detailed factory service repair manual for theJCB 525-58 TELESCOPIC HANDLER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB 525-58 TELESCOPIC HANDLER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Hydraulics
Body and Framework
PlaceAce Control System
Servo Control System
Engine
Transmission
Axles
Brakes
Hydraulic Steering
Electrics
Service Tools
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB 525-58 TELESCOPIC HANDLER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Yale e187 glc040 065 rg-tg-zg lift truck service repair manualfjskkdmmmse
This document provides a service manual for GC/GLC040-065RG/TG/ZG (E187) lift trucks. It contains sections on various parts and systems of the lift truck, including the frame, engines, fuel systems, transmission, axles, steering, brakes, hydraulics, electrical systems, mast, and maintenance procedures. The document provides descriptions, removal and installation instructions, and repair procedures for components like the operator module, hood, overhead guard, counterweight, and LED lights. Safety warnings are included about putting the lift truck on blocks for maintenance and not operating it without the overhead guard correctly installed.
Yale e187 gc040 065 rg-tg-zg lift truck service repair manualfskkkdjskemd
This document provides a service manual for GC/GLC040-065RG/TG/ZG (E187) lift trucks. It contains sections on various parts and systems of the lift truck, including the frame, engines, fuel systems, transmission, axles, steering, brakes, hydraulics, electrical systems, mast, and maintenance procedures. The document provides descriptions of components and repair procedures for the operator module, hood and side covers, overhead guard, and counterweight. Safety warnings are provided for when putting the lift truck on blocks for maintenance.
This document is a service manual for MerCruiser GM 4 cylinder 181 cid (3.0L) marine engines. It provides information on engine components, maintenance procedures, troubleshooting, removal and installation of engine systems, and specifications. Safety notices are included throughout to warn technicians of hazards.
Kubota v3300 e2 b diesel engine service repair manualfusjejkdkmse
This workshop manual provides information on servicing the V3300-E2B and V3300-T-E2B diesel engines. It is divided into three parts: General, Mechanism, and Servicing. The General section includes engine identification, general precautions, maintenance checklists, and check and maintenance procedures. The Mechanism section describes the engine construction and functions. The Servicing section covers troubleshooting, specifications, torque values, adjustments, disassembly/assembly procedures, and servicing. The manual is intended to inform service personnel about servicing and maintaining these engines.
Bomag bw138 ac single tandem vibratory roller service repair manualpfiskdmjekm
This document provides operating and maintenance instructions for BOMAG tandem vibratory rollers, models BW 125 ADH, BW 135 AD, BW 138 AD, BW 138 AC. It includes technical specifications, safety information, descriptions of controls, operating procedures, maintenance schedules and procedures, and troubleshooting tips. The document is intended for operators and maintenance personnel and aims to ensure safe and proper use of the machines.
John deere f911 front mower service repair manualfjjskdmnenemm
This technical manual provides service information for John Deere F911, F915, F925, F932, and F935 front mowers. The manual contains sections on engine repair, fuel and air repair, electrical repair, power train repair, steering and brake repair, hydraulic repair, and miscellaneous repair. It includes specifications, component locations, theory of operation, diagnosis procedures, and repair instructions. Technicians should follow all safety instructions when working on the mowers.
Hyundai 50 df 7 forklift truck service repair manualfusjejkdkmse
This document provides an overview and table of contents for a service manual. It outlines the general safety information covered in Section 1 and describes the procedures for removal, installation, and repair covered in Sections 2 through 8. These sections address the power train system, brake system, steering system, hydraulic system, electrical system, and mast. The document also provides directions for how to read and organize the service manual.
JCB 525-58 TELESCOPIC HANDLER Service Repair Manual ALL:561001 Onwardssjehfd ksejfm
This is the Highly Detailed factory service repair manual for theJCB 525-58 TELESCOPIC HANDLER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JCB 525-58 TELESCOPIC HANDLER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Hydraulics
Body and Framework
PlaceAce Control System
Servo Control System
Engine
Transmission
Axles
Brakes
Hydraulic Steering
Electrics
Service Tools
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJCB 525-58 TELESCOPIC HANDLER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
The document provides instructions for replacing the rear differential oil in a 2004 Toyota RAV4 with 4WD. It describes draining the old oil, filling with new oil of the specified type and viscosity, and tightening to the proper torque spec. It also includes diagrams showing oil level and components. Further sections describe procedures for differential removal and disassembly, component inspection and measurement, bearing removal, and torque specifications.
2003 toyota highlander service repair manualfjjsjeusekkekm
This document provides instructions on how to properly use the 2005 Highlander repair manual. It discusses the manual's layout and conventions including repair procedures, specifications, torque values, and precautions when working with supplemental restraint systems. Proper jacking, clip and fastener removal, vacuum hose and electrical connection procedures are described. The importance of using proper safety equipment and following warnings is emphasized throughout.
Jcb 515 40 load control (supplement) service repair manualjksmenmd
The LCS load control system provides protection against tipping forward by restricting hydraulic functions that move the load past a predetermined stability point. It has two modes - Load Control mode, which is automatically selected at start up, and Ground Work mode. In Load Control mode, boom lowering and tilting functions are derated as stability decreases. Extend is allowed until the limit, then lowering, tilting, crowding and dumping are disabled to prevent further instability. Lift and retract are permitted to retrieve the load. Green, amber and red LEDs on the display indicate the machine's stability status.
Caterpillar cat 323 d s excavator (prefix rac) service repair manual (rac0000...fusjejkdkmse
The document provides instructions for removing and installing valve guides and valve seat inserts on a Caterpillar C6.4 engine. It describes:
1. Removing the valves, electronic unit injectors, and turning the cylinder head over to access the valve guides.
2. Using specialty tools to remove the old valve guides and install new guides.
3. Notching and extracting the valve seat inserts using specialty tools before cleaning and installing new inserts.
4. Installing the valve seat inserts, valves, and electronic unit injectors to complete the job.
Kubota v3600 t-e3 b diesel engine service repair manualfusjejkdkmse
This document provides service technicians with information on servicing and maintaining various Kubota diesel engine models. It is divided into three parts covering general information, engine mechanisms, and servicing procedures.
The general section includes instructions on identifying engine models, general safety precautions, maintenance checklists, and maintenance schedules. Technicians are advised to check specific components and systems daily, every 50 hours, 250 hours, 500 hours, and longer intervals. The document also lists special tools needed for servicing tasks.
Hyundai 45 ds 7e forklift truck service repair manualfusjejkdkmse
This document provides an overview and structure of a service manual for a machine. It contains 8 sections that cover general information, removal/installation procedures, power train, brake, steering, hydraulic, electrical, and mast systems. Each section is divided into groups that explain the structures, operations, inspections, troubleshooting, and maintenance procedures for the components in that system. Symbols are used to mark important safety information. Conversion tables are included at the end to enable simple unit conversions.
This is the Highly Detailed factory service repair manual for theJOHN DEERE 5310 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JOHN DEERE 5310 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
General information
Engine repair
Fuel and air repair
Electrical repair
Power train repair
Steering and brake repair
Hydraulic repair
Miscellaneous repair
Operator station repair
Test and adjustment specifications / Operational checkout procedures
Engine operation, tests and adjustments
Fuel / air operation, tests and adjustments
Electrical system operation, tests & adjustments
Power train operation, tests & adjustments
Steering and brake operation, tests & adjustments
Hydraulic system operation, tests & adjustments
Operator station
Dealer fabricated tools
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJOHN DEERE 5310 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Toro reelmaster 6500 d (peugeot engine) mower service repair manualufjjjskekemme
This document is a service manual for the Reelmaster 6500-D/6700-D. It contains chapters covering safety, product records and manuals, engine systems, hydraulic systems, electrical systems, axles/planetaries/brakes, cutting units, and wiring diagrams. The introduction chapter outlines important safety instructions for operating and servicing the machine, including wearing protective equipment, reading the manual, fuel handling, operating on slopes, and ensuring proper functioning of safety devices.
Hyundai 80 d 7e forklift truck service repair manualfjjsekmmm
The document provides instructions for disassembling and assembling a steering unit. It describes the individual parts of the steering unit and lists the necessary tools. The steps for disassembly include removing the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, thrust bearing and races from the sleeve and spool. Assembly involves reversing these steps, making sure to properly position springs, seals, and other small parts. Torque specifications are provided for mounting bolts.
Kawasaki 70 z6 wheel loader service repair manual (serial no. 70c7 0101 and up)fjskkmemem
This document provides layout diagrams and specifications for a Kawasaki 70Z6 wheel loader. It includes diagrams showing the location of major components such as the bucket, cab, batteries, cylinders, valves, engine, and tanks. Specification tables list metrics such as operating weight, tipping load, engine details, dimensions, speeds, and tire size. Component specifications are provided for the engine, hydraulic and electrical systems.
This document is an operation and maintenance manual for Hitachi wheel loaders models 70Z6 and 80Z6, powered by Cummins QSB6.7 engines. It contains sections on safety procedures, component identification, operation instructions, maintenance, troubleshooting, specifications, and other technical information for servicing the machines. Safety is the primary focus, with multiple pages outlining hazards and required precautions to prevent injury when operating or working on the loaders.
This document is an operation and maintenance manual for Hitachi wheel loaders models 70Z6 and 80Z6 powered by Cummins QSB6.7 engines. It contains sections on safety, components, operation, maintenance, transportation, and specifications. The safety section emphasizes safe practices for operating and servicing the machine, including wearing protective equipment, inspecting the machine, securing loads during transport, and avoiding tipping hazards. The components section describes the features and functions of the operator's station and controls. The operation section provides instructions for starting, driving, and using the machine's attachments. The maintenance section outlines inspection schedules and procedures for servicing systems like the engine, transmission, hydraulics, and more.
Kawasaki 70 tm7 wheel loader service repair manual (serial no. 70c6 5001 and up)fjskkmemem
This document provides instructions and guidelines for disassembling and reassembling a wheel loader. It contains sections on general information, maintenance standards, disassembling and reassembling the body, travel system, front attachment, and other components. Precautions are outlined for tasks like tightening bolts, bleeding air from systems, and releasing hydraulic pressures. Proper cleaning, inspection, lubrication and torque specifications are emphasized to ensure correct reassembly.
Kawasaki 67 z7b wheel loader service repair manual (serial no. 65c5 5001 and up)fjskkmemem
The document provides an overview of the main components of a wheel loader, including:
- The engine, transmission, hydraulic components, electrical system, and aftertreatment device.
- Additional components such as the cab, battery box, fuel tank, air cleaner, radiator, and hydraulic oil tank.
- Optional components include a ride control valve, secondary steering components, and DEF system parts.
- Diagrams show the layout and location of these major components.
This document is the parts catalog for a wheel loader powered by a Cummins QSB4.5 engine. It contains information on periodic replacement parts for filters, bulbs, the engine, cooling, air intake, fuel, exhaust, transmission, axles, tires, chassis, and other systems. The parts are organized by category and include diagrams and part numbers.
This document is an operation and maintenance manual for a wheel loader model 67Z7B/67TM7B powered by a Cummins QSB4.5 engine. It contains safety information, component identification, operating instructions, maintenance procedures, and specifications. The manual instructs operators on safe and proper use of the machine, including starting and stopping the engine, driving, lifting and dumping loads, and daily inspection and maintenance tasks.
Kawasaki 67 z7 67tm7 wheel loader service repair manual (65j5 8001 and up)fjskkmemem
This document provides guidelines and precautions for disassembling and reassembling a wheel loader. It discusses preparing the work area and tools, inspecting the machine beforehand, draining fluids properly, using identification tags, matching marks, and special tools as needed. Proper disassembly and reassembly are important to avoid damage and ensure correct functioning.
Kawasaki 67 z7 67tm7 wheel loader service repair manual (65j5 5001 and up)fjskkmemem
The document provides instructions and safety precautions for disassembling and assembling a wheel loader. It contains sections on general precautions, tightening specifications, painting, bleeding air, and preparing for inspection and maintenance. The general precautions section emphasizes cleaning parts and marking components for reassembly. It also provides guidelines for handling seals, slings, and storing removed parts. Proper cleaning, lubrication, and replacement of seals is important to prevent damage during reassembly.
This document is an operation and maintenance manual for a wheel loader model 67Z7B/67TM7B powered by a Cummins QSB4.5 engine. It contains safety information, component identification, operating instructions, maintenance procedures, and specifications. The manual instructs operators on safe machine operation, transport, and maintenance to prevent injuries or machine damage.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse gears. The 67TM7 is available with either a quick coupler or general purpose bucket and is also powered by an ISUZU 4HK1 engine.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse. The 67TM7 comes in a quick coupler or general purpose configuration and is also powered by an ISUZU 4HK1 engine. Dimensional drawings include measurements for overall length, width, height, wheelbase, tread, ground clearance, and dumping angles.
The document provides instructions for replacing the rear differential oil in a 2004 Toyota RAV4 with 4WD. It describes draining the old oil, filling with new oil of the specified type and viscosity, and tightening to the proper torque spec. It also includes diagrams showing oil level and components. Further sections describe procedures for differential removal and disassembly, component inspection and measurement, bearing removal, and torque specifications.
2003 toyota highlander service repair manualfjjsjeusekkekm
This document provides instructions on how to properly use the 2005 Highlander repair manual. It discusses the manual's layout and conventions including repair procedures, specifications, torque values, and precautions when working with supplemental restraint systems. Proper jacking, clip and fastener removal, vacuum hose and electrical connection procedures are described. The importance of using proper safety equipment and following warnings is emphasized throughout.
Jcb 515 40 load control (supplement) service repair manualjksmenmd
The LCS load control system provides protection against tipping forward by restricting hydraulic functions that move the load past a predetermined stability point. It has two modes - Load Control mode, which is automatically selected at start up, and Ground Work mode. In Load Control mode, boom lowering and tilting functions are derated as stability decreases. Extend is allowed until the limit, then lowering, tilting, crowding and dumping are disabled to prevent further instability. Lift and retract are permitted to retrieve the load. Green, amber and red LEDs on the display indicate the machine's stability status.
Caterpillar cat 323 d s excavator (prefix rac) service repair manual (rac0000...fusjejkdkmse
The document provides instructions for removing and installing valve guides and valve seat inserts on a Caterpillar C6.4 engine. It describes:
1. Removing the valves, electronic unit injectors, and turning the cylinder head over to access the valve guides.
2. Using specialty tools to remove the old valve guides and install new guides.
3. Notching and extracting the valve seat inserts using specialty tools before cleaning and installing new inserts.
4. Installing the valve seat inserts, valves, and electronic unit injectors to complete the job.
Kubota v3600 t-e3 b diesel engine service repair manualfusjejkdkmse
This document provides service technicians with information on servicing and maintaining various Kubota diesel engine models. It is divided into three parts covering general information, engine mechanisms, and servicing procedures.
The general section includes instructions on identifying engine models, general safety precautions, maintenance checklists, and maintenance schedules. Technicians are advised to check specific components and systems daily, every 50 hours, 250 hours, 500 hours, and longer intervals. The document also lists special tools needed for servicing tasks.
Hyundai 45 ds 7e forklift truck service repair manualfusjejkdkmse
This document provides an overview and structure of a service manual for a machine. It contains 8 sections that cover general information, removal/installation procedures, power train, brake, steering, hydraulic, electrical, and mast systems. Each section is divided into groups that explain the structures, operations, inspections, troubleshooting, and maintenance procedures for the components in that system. Symbols are used to mark important safety information. Conversion tables are included at the end to enable simple unit conversions.
This is the Highly Detailed factory service repair manual for theJOHN DEERE 5310 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JOHN DEERE 5310 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
General information
Engine repair
Fuel and air repair
Electrical repair
Power train repair
Steering and brake repair
Hydraulic repair
Miscellaneous repair
Operator station repair
Test and adjustment specifications / Operational checkout procedures
Engine operation, tests and adjustments
Fuel / air operation, tests and adjustments
Electrical system operation, tests & adjustments
Power train operation, tests & adjustments
Steering and brake operation, tests & adjustments
Hydraulic system operation, tests & adjustments
Operator station
Dealer fabricated tools
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJOHN DEERE 5310 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Toro reelmaster 6500 d (peugeot engine) mower service repair manualufjjjskekemme
This document is a service manual for the Reelmaster 6500-D/6700-D. It contains chapters covering safety, product records and manuals, engine systems, hydraulic systems, electrical systems, axles/planetaries/brakes, cutting units, and wiring diagrams. The introduction chapter outlines important safety instructions for operating and servicing the machine, including wearing protective equipment, reading the manual, fuel handling, operating on slopes, and ensuring proper functioning of safety devices.
Hyundai 80 d 7e forklift truck service repair manualfjjsekmmm
The document provides instructions for disassembling and assembling a steering unit. It describes the individual parts of the steering unit and lists the necessary tools. The steps for disassembly include removing the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, thrust bearing and races from the sleeve and spool. Assembly involves reversing these steps, making sure to properly position springs, seals, and other small parts. Torque specifications are provided for mounting bolts.
Kawasaki 70 z6 wheel loader service repair manual (serial no. 70c7 0101 and up)fjskkmemem
This document provides layout diagrams and specifications for a Kawasaki 70Z6 wheel loader. It includes diagrams showing the location of major components such as the bucket, cab, batteries, cylinders, valves, engine, and tanks. Specification tables list metrics such as operating weight, tipping load, engine details, dimensions, speeds, and tire size. Component specifications are provided for the engine, hydraulic and electrical systems.
This document is an operation and maintenance manual for Hitachi wheel loaders models 70Z6 and 80Z6, powered by Cummins QSB6.7 engines. It contains sections on safety procedures, component identification, operation instructions, maintenance, troubleshooting, specifications, and other technical information for servicing the machines. Safety is the primary focus, with multiple pages outlining hazards and required precautions to prevent injury when operating or working on the loaders.
This document is an operation and maintenance manual for Hitachi wheel loaders models 70Z6 and 80Z6 powered by Cummins QSB6.7 engines. It contains sections on safety, components, operation, maintenance, transportation, and specifications. The safety section emphasizes safe practices for operating and servicing the machine, including wearing protective equipment, inspecting the machine, securing loads during transport, and avoiding tipping hazards. The components section describes the features and functions of the operator's station and controls. The operation section provides instructions for starting, driving, and using the machine's attachments. The maintenance section outlines inspection schedules and procedures for servicing systems like the engine, transmission, hydraulics, and more.
Kawasaki 70 tm7 wheel loader service repair manual (serial no. 70c6 5001 and up)fjskkmemem
This document provides instructions and guidelines for disassembling and reassembling a wheel loader. It contains sections on general information, maintenance standards, disassembling and reassembling the body, travel system, front attachment, and other components. Precautions are outlined for tasks like tightening bolts, bleeding air from systems, and releasing hydraulic pressures. Proper cleaning, inspection, lubrication and torque specifications are emphasized to ensure correct reassembly.
Kawasaki 67 z7b wheel loader service repair manual (serial no. 65c5 5001 and up)fjskkmemem
The document provides an overview of the main components of a wheel loader, including:
- The engine, transmission, hydraulic components, electrical system, and aftertreatment device.
- Additional components such as the cab, battery box, fuel tank, air cleaner, radiator, and hydraulic oil tank.
- Optional components include a ride control valve, secondary steering components, and DEF system parts.
- Diagrams show the layout and location of these major components.
This document is the parts catalog for a wheel loader powered by a Cummins QSB4.5 engine. It contains information on periodic replacement parts for filters, bulbs, the engine, cooling, air intake, fuel, exhaust, transmission, axles, tires, chassis, and other systems. The parts are organized by category and include diagrams and part numbers.
This document is an operation and maintenance manual for a wheel loader model 67Z7B/67TM7B powered by a Cummins QSB4.5 engine. It contains safety information, component identification, operating instructions, maintenance procedures, and specifications. The manual instructs operators on safe and proper use of the machine, including starting and stopping the engine, driving, lifting and dumping loads, and daily inspection and maintenance tasks.
Kawasaki 67 z7 67tm7 wheel loader service repair manual (65j5 8001 and up)fjskkmemem
This document provides guidelines and precautions for disassembling and reassembling a wheel loader. It discusses preparing the work area and tools, inspecting the machine beforehand, draining fluids properly, using identification tags, matching marks, and special tools as needed. Proper disassembly and reassembly are important to avoid damage and ensure correct functioning.
Kawasaki 67 z7 67tm7 wheel loader service repair manual (65j5 5001 and up)fjskkmemem
The document provides instructions and safety precautions for disassembling and assembling a wheel loader. It contains sections on general precautions, tightening specifications, painting, bleeding air, and preparing for inspection and maintenance. The general precautions section emphasizes cleaning parts and marking components for reassembly. It also provides guidelines for handling seals, slings, and storing removed parts. Proper cleaning, lubrication, and replacement of seals is important to prevent damage during reassembly.
This document is an operation and maintenance manual for a wheel loader model 67Z7B/67TM7B powered by a Cummins QSB4.5 engine. It contains safety information, component identification, operating instructions, maintenance procedures, and specifications. The manual instructs operators on safe machine operation, transport, and maintenance to prevent injuries or machine damage.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse gears. The 67TM7 is available with either a quick coupler or general purpose bucket and is also powered by an ISUZU 4HK1 engine.
The document provides specifications for three wheel loader models - the 62Z7, 67Z7, and 67TM7. Key specifications include bucket capacity, operating weight, tipping load, engine details, and dimensions. The 62Z7 and 67Z7 are powered by an ISUZU 4HK1 engine and have travel speeds of 39 km/h in forward and reverse. The 67TM7 comes in a quick coupler or general purpose configuration and is also powered by an ISUZU 4HK1 engine. Dimensional drawings include measurements for overall length, width, height, wheelbase, tread, ground clearance, and dumping angles.
Kawasaki 60 z7 wheel loader parts catalogue manual (60d1 8001 and up)fjskkmemem
This document is a parts catalog for a wheel loader model 60Z7 powered by a DEUTZ TCD3.6L4 engine. The catalog contains over 500 parts organized into the following sections: power train, engine, cab, chassis, hydraulic system, electric parts, and loader attachment. The parts listed include components of the transmission, cooling system, seats, controls, piping, cylinders, and name plates. Serial numbers covered are 60D1-8001 through [END].
This document is an operation and maintenance manual for a Kawasaki 60Z7 wheel loader. It provides safety instructions for operating the machine, descriptions of components and controls, and maintenance procedures. Key points covered include starting and stopping the engine, driving and steering procedures, operating attachments, transporting, and daily inspections. The manual emphasizes safe practices and warns of potential hazards.
This document provides instructions for removing and installing exhaust and inlet valve guides on Caterpillar 325 excavators. The removal procedure involves using a valve guide driver tool to push the guides out of the cylinder head. For installation, new guides are lubricated and pressed into place using the same tool. Proper cleaning and lubrication are emphasized to prevent contaminants from causing premature wear.
This document provides instructions for removing and installing an exhaust manifold, inlet manifold, valves, and valve guides on a 325-A FM L EXCAVATOR 7LM. The procedures include removing bolts and studs, applying anti-seize compound and sealer, installing gaskets and locking tabs, and torquing bolts to the specified values. Tools required are also listed. The document contains illustrations to supplement the written instructions.
Caterpillar cat 325 l track type excavator (prefix 8nl) service repair manual...fjskkmemem
This document provides instructions for removing and installing a governor and fuel injection control linkage on a Caterpillar 3116 engine. It describes the required tools and parts, presents illustrations of the process, and provides step-by-step instructions including applying lubricant to seals, installing clips and pins, and setting adjustments. Special instructions are referenced for inspecting and modifying specific parts.
Caterpillar cat 325 l track type excavator (prefix 8jg) service repair manual...fjskkmemem
This document provides instructions for removing and installing an exhaust manifold on a 325-A excavator. The removal procedure involves removing bolts and gaskets from the cylinder head assembly. The installation procedure describes applying anti-seize compound, installing new gaskets and bolts, and tightening the bolts in a specific sequence. Tools required are also listed.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Yale a875 gdp040 060 rg-tg-zg lift truck service repair manual
1. GP/GLP/GDP040-060RG/TG/ZG (A875)
SERVICE MANUAL CONTENTS
SECTION
PART
NUMBER
YRM
NUMBER
REV
DATE
FRAME............................................................................................................................ 524158636 0100 YRM 0505 06/04
MAZDA FE AND F2 ENGINE......................................................................................... 524158742 0600 YRM 0496 01/11
MAZDA HA/XA DIESEL ENGINES................................................................................ 524162461 0600 YRM 1019 01/11
GM 3.0L GAS/LPG ENGINE........................................................................................... 524158637 0600 YRM 1020 10/06
COOLING SYSTEM........................................................................................................ 524150775 0700 YRM 0626 03/03
LPG FUEL SYSTEM (GM 3.0L)...................................................................................... 524158744 0900 YRM 0498 12/03
GASOLINE FUEL SYSTEM (MAZDA)........................................................................... 524158745 0900 YRM 0502 12/03
LPG FUEL SYSTEM (MAZDA)....................................................................................... 524158746 0900 YRM 0523 12/03
LPG FUEL SYSTEM (AISAN OPEN LOOP).................................................................. 524158747 0900 YRM 0925 12/03
LPG FUEL SYSTEM (AISAN CLOSED LOOP)............................................................. 524158748 0900 YRM 0948 10/06
ELEC. CONT. LPG/GAS FUEL SYS GM 3.0/4.3L EPA COMP. ENG........................... 524208004 0900 YRM 1088 05/06
GASOLINE FUEL SYS MAZDA FE AND FE EPA COMP. ENG................................... 524214124 0900 YRM 1089 04/04
SINGLE-SPEED POWERSHIFT TRANSMISSION-DESC AND OPER......................... 524158749 1300 YRM 0500 08/03
SINGLE-SPEED POWERSHIFT TRANSMISSION-REPAIR.......................................... 524158750 1300 YRM 0501 03/04
DRIVE AXLE................................................................................................................... 524158751 1400 YRM 0499 10/04
STEERING AXLE............................................................................................................ 524158752 1600 YRM 0316 08/06
STEERING CONTROL UNIT.......................................................................................... 524158753 1600 YRM 0720 11/06
BRAKE SYSTEM............................................................................................................ 524158754 1800 YRM 0506 05/05
HYDRAULIC SYSTEM, GEAR PUMP ASSEMBLY....................................................... 524158755 1900 YRM 0513 06/04
MAIN CONTROL VALVE................................................................................................ 524158756 2000 YRM 0516 12/03
TILT CYLINDERS........................................................................................................... 524150790 2100 YRM 0103 03/07
ALTERNATOR................................................................................................................ 524150791 2200 YRM 0002 12/04
STARTER........................................................................................................................ 524150792 2200 YRM 0106 12/04
HIGH ENERGY IGNITION (HEI) SYSTEM..................................................................... 524153914 2200 YRM 0107 03/08
INSTRUMENT CLUSTER............................................................................................... 524158757 2200 YRM 0514 01/04
ELECTRICAL SYSTEM (MAZDA FE AND F2 ENGINES)............................................. 524158758 2200 YRM 0524 12/03
MICROPROCESSOR SPARK TIMING SYSTEM (GM 3.0L) (EARLY MODELS)......... 524158759 2200 YRM 0603 12/03
EEC-TROUBLESHOOTING AND REPAIR (GM 3.0L)................................................... 524158885 2200 YRM 0611 12/03
EEC - DESCRIPTION AND OPERATION...................................................................... 524158887 2200 YRM 0612 12/03
MICROPROCESSOR SPARK TIMING SYSTEM (GM 3.0L/4.3L) (LATER MODELS). 524153916 2200 YRM 0765 03/03
EEC-DESCRIPTION AND OPERATION (GM 3.0L/4.3L)............................................... 524153917 2200 YRM 0781 03/03
EEC-TROUBLESHOOTING AND REPAIR.................................................................... 524153918 2200 YRM 0782 03/03
ECM DESCRIPTION AND OPERATION (MEFI)............................................................ 524162462 2200 YRM 1016 10/04
ECM TROUBLESHOOTING AND REPAIR (MEFI)........................................................ 524162463 2200 YRM 1017 10/04
ECM DIAG. TROUBLESHOOTING GM 3.0L/4.3L EPA COMP. ENG........................... 524208009 2200 YRM 1090 04/05
ECM DIAGNOSTIC TROUBLESHOOTING (MAZDA FE AND F2)................................ 524217573 2200 YRM 1092 04/05
ELECTRICAL SYSTEM MAZDA FE AND F2 GAS EPA COMP. ENG.......................... 524214123 2200 YRM 1104 03/04
MAST - DESCRIPTION................................................................................................... 524158890 4000 YRM 0521 03/06
MAST - REPAIR.............................................................................................................. 524158891 4000 YRM 0522 07/10
METRIC AND INCH (SAE) FASTENERS....................................................................... 524150797 8000 YRM 0231 10/13
PERIODIC MAINTENANCE............................................................................................ 524158900 8000 YRM 0707 06/09
CAPACITIES AND SPECIFICATIONS........................................................................... 524158901 8000 YRM 0708 01/11
DIAGRAMS..................................................................................................................... 524158902 8000 YRM 0709 10/04
Service information for Cummins diesel engines can be ordered through the Hyster Literature Distribution Center.
PART NO. 524158635 (10/13)
2. 100 YRM 505 Operator Module Repair
General
WARNING
The lift truck must be put on blocks for some types
of maintenance and repair. The removal of the
following assemblies will cause large changes in
the center of gravity: mast, drive axle, engine and
transmission, and counterweight. When the lift
truck is put on blocks, put additional blocks in the
following positions to maintain stability:
• Before removing the mast and drive axle, put
blocks under the counterweight so the lift truck
cannot fall backward.
• Before removing the counterweight, put blocks
under the mast assembly so the lift truck cannot
fall forward.
The surface must be solid, even, and level when the
lift truck is put on blocks. Make sure that any blocks
used to support the lift truck are solid, one-piece
units. See the Operating Manual or the Periodic
Maintenance manual for your lift truck.
This section has the description of the frame and some
connected parts. See Figure 1. Procedures for the re-
moval and installation of the counterweight, hood, over-
head guard, and engine (including the transmission) are
found in this section. Checks for the operator restraint
system and procedures for the repair of fuel and hy-
draulic tanks and installation of safety labels are also
included.
Description
The frame is one weldment and includes the hydraulic
tank and the fuel tank for gasoline or diesel fuel. There
is a counterweight for each capacity of lift truck. The
counterweights are similar, but are different weights.
The muffler is fastened to the frame inside of the coun-
terweight.
An operator module is installed on the frame with rubber
mounts. See Figure 1. The overhead guard, steering
controls, instrument panel, hood, and seat are installed
on the operator module. The hood is connected to the
operator module with hinges. The floor plates and side
access doors can be removed for access to the engine,
transmission, and other components.
Operator Module Repair
REMOVE
1. Remove the hood and side covers. See Figure 2.
2. Remove the steering housing and instrument clus-
ter from the cowl. Remove the capscrews that hold
the parking brake lever to the cowl.
3. Remove the nuts and bolts at the mounts for the
operator module.
4. Connect a lifting device to the overhead guard. The
overhead guard and module weigh approximately
385 kg (850 lb). Lift the operator module from the
frame.
INSTALL
NOTE: If the overhead guard was removed from the
operator module, tighten the rear leg mount capscrews
to 53 N•m (39 lbf ft). On GP2.00-3.00TF/RF (GP040-
060RG/TG/ZG) units, tighten the capscrews that fasten
the module cowl side plate to the front legs to 66 N•m
(49 lbf ft). See Figure 1.
1. Connect a lifting device to the overhead guard. The
overhead guard and module weigh approximately
385 kg (850 lb). Lift the operator module onto the
frame.
2. Make sure the rubber mounts are installed in the
frame. Install the large washer and nut on the bot-
tom of the mount. Tighten the nuts to 53 N•m
(39 lbf ft).
3. Install the hood and side covers.
4. Install the steering controls and the parking brake
lever.
5. Install the floor plates.
1
4. 100 YRM 505 Hood and Side Covers Repair
Legend for Figure 1
1. OPERATOR MODULE
2. FRAME
3. HYDRAULIC TANK
4. STEERING AXLE MOUNT
5. DRIVE AXLE MOUNT
6. CAPSCREW
7. WASHER
8. RUBBER MOUNT
9. NUT
10. COVER
11. STORAGE COMPARTMENT
12. OVERHEAD GUARD (RAISED)
13. SCREW
14. HANDLE
15. PLUG
16. LOCKWASHER
17. BAR
18. FENDER
19. CROSSMEMBER
Hood and Side Covers Repair
WARNING
The hood and hood latch must be correctly adjusted
for the correct operation of the operator restraint
system.
The operator’s seat is fastened to the upper hood
panel. This upper hood panel opens forward for access
to the engine compartment. Two hinges fasten the
upper hood panel to the front plate weldment of the
engine compartment. A latch mechanism with a push
knob holds the upper hood panel in position during
operation of the lift truck. See Figure 2.
A torsion spring is fastened between the front plate
weldment and the upper hood panel to help personnel
when opening and closing the hood. Sound-absorbing
materials are fastened inside the hood panels to reduce
noise during operation. See Figure 2 and Figure 3.
REMOVE
Remove the floor plate and the hood and side covers.
INSTALL AND ADJUST
Install and adjust the hood and side covers as follows:
1. Install the crossmember onto the frame. Install the
front plate weldment, but do not tighten the four
capscrews.
2. Install the hinges on the upper hood panel. Do not
tighten the capscrews.
3. Install the latch hook.
4. Install the upper hood panel in position on the front
plate weldment. Connect the torsion spring. Install
the hinge pins. Install the rod.
5. Close the upper hood panel until the rubber cush-
ions are against the rear crossmember of the en-
gine compartment. Align the edge of the upper
hood panel with the rear crossmember of the en-
gine compartment. Tighten the capscrews for the
hinges.
6. When the upper hood panel is fully closed, check
that the latch fully engages the latch hook. If the
latch does not engage correctly, add or remove
washers (shims) as necessary to adjust the latch
assembly. When the adjustment is correct, tighten
the capscrews that hold the latch assembly.
7. Install the hinges onto the engine compartment, but
do not tighten the bolts.
8. Install the access doors on the hinges. Close the
access doors. Adjust the stop bolts and front plate
so that the front plate is even from side to side and
the access doors will engage the tabs. Tighten the
capscrews on the front plate. Tighten the jam nuts
on the stop bolts.
9. Adjust the hinges so that the front edges of the ac-
cess doors are even with the front plate. Tighten
the bolts for the hinges. Install washers (shims) as
necessary so that the access doors are against the
hood seal when they are closed.
3
5. Hood and Side Covers Repair 100 YRM 505
1. ACCESS DOOR (LH)
2. ACCESS DOOR (RH)
3. CROSSMEMBER
4. UPPER HOOD PANEL
5. PLATE
6. HINGE
7. ROD
8. TORSION SPRING
9. LATCH HOOK
10. SPACER
11. BUSHING
12. RUBBER CUSHION
13. TRIM
14. CAPSCREW
15. NUT
16. WASHER
17. PIN
18. COTTER PIN
19. SEAL
20. LATCH ASSEMBLY
Figure 2. Hood and Side Covers Arrangement
4
6. 100 YRM 505 Overhead Guard Repair
1. LATCH ASSEMBLY
2. PUSH KNOB
3. LATCH HOOK
4. LATCH (ENGAGED)
5. LATCH (DISENGAGED)
6. SHIMS (AS NECESSARY)
7. UPPER HOOD PANEL
8. FRONT PLATE
9. REAR CROSSMEMBER OF ENGINE
COMPARTMENT
10. TORSION SPRING
11. STOP BOLT
12. FRONT CROSSMEMBER OF ENGINE
COMPARTMENT
Figure 3. Hood Assembly
Overhead Guard Repair
REMOVE AND INSTALL
WARNING
Do not operate the lift truck without the overhead
guard correctly fastened to the lift truck.
Changes that are made by welding, or by drilling
holes that are too big or in the wrong location, can
reduce the strength of the overhead guard. See the
section Changes to the Overhead Guard in the Peri-
odic Maintenance 8000 YRM 707 for instructions on
making changes to the overhead guard.
1. Connect a crane or lifting device to remove or install
the overhead guard. Disconnect the air intake at the
overhead guard leg.
5
7. Overhead Guard Repair 100 YRM 505
2. Disconnect any wires between the frame and the
overhead guard. When the overhead guard is lifted
from the frame, make sure that any electrical wires
are moved through the holes in the frame so that
they are not damaged.
3. There are two capscrews at each corner of the left-
hand leg of the overhead guard. Remove and install
the capscrews for the overhead guard as follows:
a. Access to the bolts at the front of the overhead
guard is under the dash panel. Remove the
plastic box from the right-hand side of the dash
panel.
b. Access to the bolts at the rear of the overhead
guard is under the rear fender wells.
c. Tighten the rear leg mount capscrews to
53 N•m (39 lbf ft). On GP2.00-3.00TF/RF
(GP040-060RG/TG/ZG) units, tighten the cap-
screws that fasten the module cowl side plate
to the front legs to 66 N•m (49 lbf ft).
NOTE: The air inlet for the air filter is installed in the
left-hand leg of the overhead guard. Make sure the grill
is installed with the louvers pointed downward.
LED BACKUP AND BRAKE LIGHTS,
REPLACE
NOTE: Newer models of lift trucks are equipped with
LED (Light Emitting Diode) backup and brake tail lights.
These light assemblies are non-repairable and must be
replaced as a complete unit. See the Parts Manual for
replacement LED lights.
Remove
1. Disconnect negative terminal of battery and remove
the key.
2. Disconnect the LED light from the chassis light har-
ness.
3. Remove LED light assembly and harness from
mounting bracket. See Figure 4.
4. If the LED mounting bracket must be removed from
the overhead guard leg, remove the plug, screw
and bracket from the overhead guard leg.
Install
1. If the mounting bracket was removed, install it onto
the overhead guard leg. Insert the plug and screw
to attach mounting bracket to overhead guard leg.
See Figure 4.
2. Install the LED light assembly and harness on the
mounting bracket.
3. Connect the LED light to the chassis light harness.
4. Connect the negative terminal of battery and close
the hood.
A. LED ASSEMBLY WITH STANDARD EXHAUST
B. LED ASSEMBLY WITH OVERHEAD EXHAUST
1. LED LIGHT
2. SCREW
3. WASHER
4. LOCKNUT
5. MOUNTING BRACKET
6. GROMMET
7. PLUG
8. SCREW
9. OVERHEAD GUARD LEG
Figure 4. LED Backup and Brake Lights Assembly
6
8. 100 YRM 505 Counterweight Repair
Counterweight Repair
WARNING
The lift truck must be put on blocks for some types
of maintenance and repair. The removal of the
following assemblies will cause large changes in
the center of gravity: mast, drive axle, engine and
transmission, and counterweight. When the lift
truck is put on blocks, put additional blocks in the
following positions to maintain stability:
• Before removing the mast and drive axle, put
blocks under the counterweight so the lift truck
cannot fall backward.
• Before removing the counterweight, put blocks
under the mast assembly so the lift truck cannot
fall forward.
The surface must be solid, even, and level when
the lift truck is put on blocks. Make sure that any
blocks used to support the lift truck are solid, one-
piece units. See the Operating Manual or Periodic
Maintenance 8000 YRM 707 for your lift truck.
The counterweight is held in position on the frame by
two hooks that are part of the frame. One M24 × 3
capscrew holds the counterweight to the lower part of
the frame.
REMOVE
WARNING
Do not operate the lift truck if the capscrew for the
counterweight is not installed. When the capscrew
is removed, the counterweight can fall from the lift
truck.
WARNING
LPG can cause an explosion. Do not cause sparks
or permit flammable material near the LPG system.
LPG fuel systems can be disconnected indoors
only if the lift truck is at least 8 m (26 ft) from any
open flame, motor vehicles, electrical equipment,
or ignition source.
Close the shutoff valve on the LPG tank before any
part of the engine fuel system is disconnected. Run
the engine until the fuel in the system is used and
the engine stops.
If the engine will not run, close the shutoff valve on
the LPG tank. Loosen the fitting on the supply hose
from the LPG tank where it enters the filter unit.
Permit the pressure in the fuel system to decrease
slowly. Fuel leaving the fitting removes heat. Use a
cloth to protect your hands from the cold fitting.
1. If the lift truck has an LPG fuel system, use the
following procedure to remove the LPG tank and
bracket so that the counterweight can be removed.
See Figure 5.
Additional information on the LPG fuel system can
be found in the following sections:LPG Fuel Sys-
tem, GM 2.2L and 3.0L Engines 900 YRM 498,
LPG Fuel System, Mazda FE Engine 900 YRM
523, or Electronic Controlled LPG/Gasoline Fuel
System, GM 3.0L and 4.3L EPA Compliant En-
gines 900 YRM 1088.
a. LPG tanks can be removed and replaced in-
doors only if the lift truck is at least 8 m (26 ft)
from any flame or ignition source.
b. Move the lift truck to the area where tanks are
changed.
c. Turn the shutoff valve clockwise until the valve
is completely closed.
d. Run the engine until it stops, then turn the key
switch to the OFF position.
e. Disconnect the quick-disconnect fitting.
f. Release the LPG tank latch and remove the
tank from the bracket.
2. If an overhead exhaust is installed, remove it as
shown in Figure 12.
WARNING
The counterweight is heavy. Make sure that the eye-
bolt and lifting devices have enough capacity to lift
the weight. The approximate weights of the coun-
terweight castings are shown in Table 1.
3. Install a lifting eye in the lifting hole of the counter-
weight. See Figure 5. Connect a crane to the lift-
ing eye and raise the crane until it holds part of the
weight of the counterweight. Remove the capscrew
that holds the counterweight to the frame. Use the
crane to lift the counterweight from the lift truck. Put
the counterweight on the floor so that it has stability
and will not fall over. Remove the spacers from the
mounts.
7
9. Counterweight Repair 100 YRM 505
1. COUNTERWEIGHT
2. CAPSCREW (M24
× 3 × 180)
3. LOCKWASHER
4. WASHER
5. TOW PIN
6. ROLL PIN
7. SEAL
8. SHIM
9. NUT
10. CAP
11. LIFTING HOLE
Figure 5. Counterweight
Table 1. Weight of Counterweights
Model kg lbs
GP 040 1,080 ±16 2380 ±35
GP 050 1406 ±21 3100 ±46
GP 060 1800 ±27 3970 ±60
GC 040 1070 ±15 2360 ±33
GC 050 1433 ±21 3160 ±46
GC 060 1855 ±28 4090 ±62
INSTALL
1. Install the spacers on the mounts. See Figure 6.
Use a crane to install the counterweight on the lift
truck. When the counterweight is installed, make
sure the hooks on the frame fully engage the coun-
terweight so it is aligned with the parts of the frame.
Use the spacers to obtain a gap of 8.5 to 11.5 mm
(0.33 to 0.45 in.) between the counterweight and
the overhead guard leg. Install and tighten the M24
× 3 capscrew to 555 N•m (409 lbf ft).
2. If the lift truck has an LPG fuel system, use the
following procedure to install the bracket and LPG
tank after the counterweight has been installed:
a. Before the LPG tank is installed on the lift truck,
make sure the tank has fuel in it. Check the
operation of the fuel gauge. Look at the fuel
gauge and move the tank. If the gauge needle
does not move, a new tank must be installed.
b. Put the tank in the tank bracket. Make sure the
tank is aligned with the alignment pin.
c. Close the latch.
d. Connect the quick-disconnect fitting to the shut-
off valve on the tank. Use your hand to tighten
the fitting. Do not open the shutoff valve until
the quick-disconnect fitting is completely tight-
ened. Turn the shutoff valve counterclockwise
to open the valve.
e. Inspect the fuel system for leaks when the shut-
off valve is open. Frost on the surface of the
tank, valves, or fittings or a strong odor indi-
cates leakage.
3. If the lift truck has an overhead exhaust, install it as
shown in Figure 12.
8
10. 100 YRM 505 Exhaust System Repair
Figure 6. Counterweight Installation
Legend for Figure 6
1. SPACER
2. RUBBER SEAL
3. CAPSCREW
Exhaust System Repair
The muffler is installed inside the cavity of the counter-
weight. A short exhaust pipe sends the exhaust gases
from the lift truck through the grille in the counterweight.
See Figure 7, Figure 8, Figure 9 or Figure 10.
An optional catalytic converter can be installed in the
exhaust system between the engine and the muffler.
See Figure 11. The type of catalytic converter installed
depends on the fuel the engine uses. See the Parts
Manual for your lift truck model.
The GP2.00-3.00RF/TF (GP040-060RG/TG/ZG) series
of lift trucks can have an overhead exhaust system. The
exhaust pipe is fastened to the top of the counterweight.
See Figure 12.
9
11. Exhaust System Repair 100 YRM 505
MUFFLER, REPLACE
The counterweight must be removed to repair or install
a new muffler or other parts of the exhaust system. See
Figure 7. When connecting the exhaust pipe to the en-
gine, do the following:
1. Install the adapter on the exhaust manifold. Tighten
the nuts for the adapter to 40 N•m (30 lbf ft). Install
the exhaust seal, spacer, and exhaust pipe. In-
stall the springs and special capscrews. Tighten
the special capscrews to 38 N•m (28 lbf ft).
2. On units with an overhead exhaust, tighten the cap-
screws that hold the overhead exhaust to the coun-
terweight to 38 N•m (28 lbf ft). Install the cover.
1. MUFFLER
2. CLAMP
3. CAPSCREW
4. NUT
5. WASHER
6. SPACER
7. PIPE
8. TUBE
9. SEAL
10. SPRING
11. LOCKWASHER
12. GASKET
13. ADAPTER
Figure 7. Exhaust System (Gasoline and LPG)
10
12. 100 YRM 505 Exhaust System Repair
1. MUFFLER
2. COUNTERWEIGHT EXHAUST PIPE
3. GASKET
4. EXHAUST PIPE
5. SEAL
6. SPRING
7. SPECIAL SCREW
8. OXYGEN SENSOR PORT
9. RAW GAS CHECK PORT
Figure 8. Exhaust System, GM3.0L EPA Compliant
11
13. Thank you very much
for your reading. Please
Click Here Then Get
More Information.
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
14. Exhaust System Repair 100 YRM 505
1. MUFFLER
2. SPACER
3. BRACKET
4. CATALYTIC CONVERTER
5. DIFFUSER
6. CLAMP
7. GASKET
8. ADAPTER
9. SEAL
10. SPRING
11. SPECIAL CAPSCREW
12. PLUG
Figure 9. Exhaust System (Low Emissions)
12
15. 100 YRM 505 Exhaust System Repair
Figure 10. EPA Compliant Exhaust System Mazda 2.0L and 2.2L
13