This document provides instructions for installing and setting up a Cobra radar/laser detector. It discusses mounting the detector on the windshield or dashboard for optimal performance and detection range. The instructions explain how to attach the windshield bracket and position the detector to have a clear view forward and backward. Settings like volume, display brightness, and mute functions are described. The document also provides an overview of how radar and laser guns work and how to interpret the alerts from the detector.

1. Important Information and
Introduction
Customer Assistance
Intro Operation Customer Warranty
Important Information
Assistance
•
Federal Laws Governing the Use of Radar Detectors
It is not against federal law to receive radar transmissions with your Cobra radar/
laser detector. The Communications Act of 1924 guarantees your right to receive
radio Secondary Icons
transmissions on any frequency. Local laws that contravene this Act, while
illegal, may be enforced by your local law enforcement officials until and unless
they are prohibited from doing so by federal court action.
Operating Instructions Safety Alert
Use of this product is not intended to, and does not, ensure that motorists or
passengers will not be involved in traffic accidents. It is only intended to alert
Notice
the motorist that an emergency vehicle equipped with a Cobra Safety Alert
transmitter is within range as defined by that product. Please call local fire
and police departments to learn if coverage exists in your area.
The Cobra line of quality products includes: Safe Driving
Motorists, as well as operators of emergency or service vehicles, are expected to
exercise all due caution while using this product, and to obey all applicable traffic laws.
Security of Your Vehicle
Main Icons
CB Radios Before leaving your vehicle, always remember to conceal your radar detector
in order to reduce the possibility of break-in and theft.
microTALK® Radios
Radar/Laser Detectors Customer Assistance
Intro Operation Customer Warranty
Safety Alert® Traffic Warning Systems CustomerAssistance
Assistance •
Should you encounter any problems with this product, or not understand its many features,
Mobile GPS Navigation Systems please refer to this owner’s manual. If you require further assistance after reading this
manual, Cobra Electronics offers the following customer assistance services:
HighGear® Accessories Secondary Icons For Assistance in the U.S.A.
Automated Help Desk English only. 24 hours a day, 7 days a week 773-889-3087 (phone).
®
CobraMarine VHF Radios
Customer Assistance Operators English and Spanish. 8:00 a.m. to 6:00 p.m. Central Time
Marine Chartplotters 12 BAND™ Mon. through Fri. (except holidays) 773-889-3087 (phone).
HIGH-PERFORMANCE Questions English and Spanish. Faxes can be received at 773-622-2269 (fax).
Power Inverters DIGITAL RADAR/LASER Notice
DETECTOR WITH XTREME RANGE Technical Assistance English only. www.cobra.com (on-line: Frequently Asked
Questions). English and Spanish. productinfo@cobra.com (e-mail).
Accessories SUPERHETERODYNE® TECHNOLOGY
For more information or to
XRS 9340
order any of our products, For Assistance Outside the U.S.A. ©2008 Cobra Electronics Corporation
please visit our website: Printed in China Contact Your Local Dealer 6500 West Cortland Street
Chicago, Illinois 60707 USA
Part No. 480-416-P
www.cobra.com Version A www.cobra.com
A1 English
Nothing Comes Close to a Cobra® English Nothing Comes Close to a Cobra® English

2. Controls, Indicators
Introduction
and Connections Introduction
Display and Product Features Customer Assistance
Accessories Order Info
Secondary Icons Intro Operation Customer Warranty
Intro Operation Customer Warranty Intro Operation Customer Warranty
Assistance
Controls, Indicators and Connections
Assistance
•
Display Assistance
•
Ordering From U.S.A.
Call 773-889-3087 for pricing or visit www.cobra.com.
Windshield For Credit Card Orders
Bracket Mount NOTE: In This Manual
Secondary Icons
Windshield Bracket
X K Ka V S
Secondary Icons
L Notice
When steady,
the display will X K Ka V S c Secondary Icons
Call 773-889-3087 [Press one from the main menu] 8:00 a.m. to 6:00 p.m. Central Time,
Monday through Friday.
Release Button be shown: Make Check or Money Order Payable To
Cobra Electronics, Attn: Accessories Dept.,
Radar, VG-2, Signal IntelliMute When blinking, 6500 West Cortland Street, Chicago, IL 60707 U.S.A.
LaserEye Spectre 1, Strength, Indicator the display will X K Ka V S c
For 360° detection of Safety and Laser and be shown: To Order Online
laser and strobe signals. Strobe Indicators City/Highway Please visit our website: www.cobra.com
Notice
Notice Mode Indicators
Notice X & K will light
Signal Strength simultaneously X K Ka V S c
Audio Jack 1 (weakest) to 5 (strongest) when indicating
Ku detection: Item # Description
Speaker Product Features • 420-030-N-001 Straight 12V Power Cord
Congratulations! You’ve made a smart choice by purchasing a high 420-026-N-001 Coiled 12V Power Cord
performance radar/laser detector from Cobra. Just look at some of the
545-159-N-001 Windshield Mounting Bracket
sophisticated features and capabilities your new unit includes:
CLP-2B Dual Port Power Adapter
Xtreme Range City or Highway
Superheterodyne Technology Modes to reduce false alerts
12V DC With super-fast sweep circuitry, Alert Programming
Power Jack XRS provides extra detection range Easy setting of radar bands to be monitored
and the best possible advance warning
to even the fastest radar guns Safety Alert
On-Off/ Volume Control Traffic warning system distinguishes
Allows you to adjust the Main Icons
Detection and Separate Alerts For: important safety alerts from other
volume of the tone alerts. City Button Radar signals (X, K, Ka and Ku bands, K band signals
Dim Button For City or Highway with signal strength indicated), laser
modes to reduce signals, Safety Alert signals, Strobe Alert Strobe Alert
Allows you to adjust the UltraBright Emergency vehicle warning system
Data Display brightness for easy false alerts. (Also signals, VG-2 signals, Spectre 1 signals
reading. (Also turns VG-2 and turns Ku alerts On
and Off.) LaserEye Manual Mute or Auto Mute
Spectre 1 alerts On and Off.*)Intro Operation Customer Warranty
A mute function of audio alerts
Assistance For 360° detection of laser and strobe signals
IntelliMute Button Mute Button
Instant-On Ready IntelliMute
Engine RPM sensing mute function For manual mute or
which reduces false alerts. Button auto mute of audio alerts. Detects radar guns with “instant-on” A mute function which
turns IntelliMute On and Off. (Also (very fast) speed monitoring capabilities automatically reduces false
enters IntelliMute setting mode. )
* alerts by sensing engine RPMs
Secondary Icons
Tone Alerts
With adjustable volume Mounting
Mounts easily on windshield
WARNING UltraBright Data Display or dashboard
* Press and hold for four seconds Modifications or parts substitutions not approved Easy-to-read with adjustable brightness
to access these functions. by Cobra Electronics Corporation may violate
This booklet describes the simple steps for mounting and setting up your detector. It also provides helpful
Notice FCC Rules and void your authority to operate
this equipment. information about how radar and laser guns are used and how you can interpret the alerts you receive.
A2 English Nothing Comes Close to a Cobra® A3 Nothing Comes Close to a Cobra® 25

3. Main Icons
Introduction
Contents
Intro Operation Customer Warranty
Assistance
Introduction
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
Intro Customer Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
Operation Customer Warranty
Assistance
SecondaryControls, Indicators and Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2
Icons
Main Icons Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Secondary Icons
Your Detector
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Notice
Intro Operation
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Customer Warranty
Auxiliary Audio Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assistance
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Highway/City Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notice
UltraBright Data Display Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Muting an Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Secondary Icons
Auto Mute Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
IntelliMute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
VG-2 and Spectre 1 Alert Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Radar Alert Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Notice Signals Detected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Audio Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Visual Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Instant-On Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Responding to Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Understanding Radar and Laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Customer Warranty Warranty
Assistance
Limited 1-Year Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Operation Customer
Customer Assistance
Warranty
Assistance Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Trademark Acknowledgement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Accessories Order Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Nothing Comes Close to a Cobra® 1

4. Your Detector
Installation Your Detector
Installation
Intro Operation Customer Warranty Intro Operation Customer Warranty
Installation Assistance •
Windshield Mounting
Assistance
Where to Mount Your Unit
You will get optimum performance from your detector if you Mount it at a 1. Attach the rubber
point approximately in the center of the vehicle, as low as possible on the
Secondary Icons Secondary Icons
cups to the bracket.
front windshield without obstructing the unit’s view of the road either to
the front or rear. Make sure unit is level with the road. You can also mount
it directly on the dashboard.
2. Make sure the rubber cups and your windshield are clean.
Windshield Mounting Dashboard Mounting 3. Push the bracket firmly
Notice Notice
onto the windshield.
4. Attach the detector to
the bracket. Check the
angle of the unit.
The unit’s lens must not be blocked and the LaserEye should have a clear view
out the back window to allow 360° detection. 5. To adjust the angle if
necessary, gently push or
The LaserEye Should Have a Clear View
pull on the bracket to bend
it. DO NOT use the detector
to bend the bracket.
6. Plug the power cord
into the detector.
Radar and laser signals pass through glass but not through other materials 7. Plug the cigarette lighter
and objects. Objects that can block or weaken incoming signals include: adapter on the power
cord into your vehicle’s
s Windshield wiper blades cigarette lighter.
s Mirrored sun screens
8. You can temporarily remove the detector whenever you
s Dark tinting at the top of the windshield wish by pressing the bracket release button and sliding
s Heated windshields currently available on some vehicles it off the bracket.
(Instaclear for Ford, Electriclear for GM.) Consult your dealer
to see if you have this option.
2 English Nothing Comes Close to a Cobra® 3

5. Your Detector
Installation Your Detector
Getting Started
Intro Operation Customer Warranty Intro Operation Customer Warranty
Dashboard Mounting
Assistance
Getting Started
Assistance
•
Power On
1. Place the detector on the dashboard to find a location
Secondary Icons
where the unit has a clear, level view of the road. X K Ka V S
Secondary Icons h
The angle can NOT be adjusted after mounting.
2. Remove the paper backing
from one side of the hook-
and-loop fastener. On-Off/ W
arn
ing
Notice
Main Icons Volume Control
Notice
Ca
uti
on
Rotate clockwise No
tic
e
3. Attach the pad to the (away from you) ce
tan r
sis me
As sto
dashboard at your chosen ty
W
arr
an
Cu
tall
ati
on
ns
location and remove the ce Ins Ico
tan r nd
ary
sis me co
As sto Se
Cu
other paper backing. Intro To Turn On the Warranty and Adjust the Audio Volume
OperationCustomer Unit Op
era
tio
n
Assistance o
Intr
Rotate the On-Off/ Tone Visual Display
Volume control
clockwise (away
Three beeps ns
h appears in the display
indicating that the power
Ico
in
Ma
from you).
Secondary Icons is on.
4. Attach the detector to the
hook-and-loop fastener. NOTE
You can remove and In some vehicles, power is supplied to the cigarette lighter even while the ignition
reattach the unit as Notice
is Off. If this is the case with your vehicle, you should turn Off or unplug your
often as you like. detector when parking for lengthy periods.
6. Plug the power cord
into the detector. Auxiliary Audio Jack •
The Auxiliary Audio Jack can be used to connect external speakers in
environments with high ambient noise levels. The internal speaker will
be disconnected. (This uses a mini stereo audio connector.)
7. Plug the cigarette lighter
adapter on the power
cord into your vehicle’s
cigarette lighter.
Auxiliary
Audio Jack
4 English Nothing Comes Close to a Cobra® 5

6. Your Detector
Settings Your Detector
Settings
Intro Operation Customer Warranty Intro Operation Customer Warranty
Settings Assistance
•
UltraBright Data Display Brightness
Assistance
When changing the Settings on your detector, please keep in mind: You can choose from three settings for Brightness of the display.
You can cycle through the settings by repeatedly pushing the Dim button.
s Buttons can have multiple functions.
The factory setting is Bright.
Secondary s
Icons All settings will be stored in memory when the power is Secondary Icons
turned Off and recalled when the power is turned back On.
Highway/City Mode Bright
Setting your detector to City mode delays all X band audio alerts until
the signal Notice
strength reaches Level 3. (A single beep will sound when the Press and
Notice
signal is first detected.) This will reduce false alerts while you are driving Dark release Dim
button
in, or near, urban areas where there are many sources for conflicting
X band signals such as microwave towers and automatic door openers. Dim
To change settings, follow the procedure listed below, which indicates
Dim Button
what you will see and hear as you complete each step. The factory setting Press and release
is Highway mode.
City Button
Press and
To Change the Brightness to Dim
Highway Mode
release Press and release Tone Visual Display
the Dim button
X K Ka V S h once.
One beep Display dims
City Mode
To Change the Brightness to Dark
X K Ka V S c Press and release Tone Visual Display
the Dim button
One beep Display remains dim
again.
(no visual alerts will be seen)
To Change From Highway Mode to City Mode
Press and release Tone Visual Display To Change the Brightness to Bright
the City button.
One beep c appears in the display Press and release Tone Visual Display
the Dim button a
Two beeps Display returns
third time.
to full brightness
To Change From City Mode Back to Highway Mode
Press and release Tone Visual Display
the City button again.
Two beeps h appears in the display
6 English Nothing Comes Close to a Cobra® 7

7. Your Detector
Settings Your Detector
Settings
Intro Operation Customer Warranty Main Icons
Intro Operation Customer Warranty
Muting an Alert
Assistance
IntelliMute Assistance
Your detector allows you to quickly turn Off an audio Alert by momentarily IntelliMute is a unique new feature that allows you to avoid alerts you
pressing the Mute button. If you press the Mute button a second time don’t need to hear because you are stopped or moving slowly. By sensing
during the Alert, the audio Alert will be turned back on. the “revs” (RPMs) of your engine, IntelliMute knows when you are at low
Secondary Icons Intro speed and automatically mutes alerts (except for strobe signals from
Secondary Icons
Operation Customer Warranty
Auto Mute Mode Assistance
emergency vehicles).
Auto Mute will automatically reduce the audio volume of all alerts
Before IntelliMute will work, you must set an activation point for your engine’s
after four seconds for as long as the signal is detected. The factory
revs (see page 11). Whenever the revs are below that point, IntelliMute will
setting for Auto Mute is on. Secondary Icons begin muting. The activation point will be stored in memory and recalled
Notice Notice
each time the power is turned on. The factory setting is IntelliMute Off.
NOTE
Notice
IntelliMute may not work with some vehicles because it cannot sense
the engine’s revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
IntelliMute On
Mute Button
Press and release
X K Ka V S c
To Turn Auto Mute Off IntelliMute Button
Press and release
Press and release Tone Visual Display
the Mute button
One beep None
while no alert
is occurring. To Turn IntelliMute On
Press and release Tone Visual Display
the IntelliMute
To Turn Auto Mute On Two beeps Dot appears next to the large
button.
character on the right
Press and release Tone Visual Display
the Mute button
Two beeps None
again while no To Turn IntelliMute Off
alert is occurring.
Press and release Tone Visual Display
the IntelliMute
One beep None
button again.
8 English Nothing Comes Close to a Cobra® 9

8. Your Detector
Settings Your Detector
Settings
Intro Operation Customer Warranty Intro Operation Customer Warranty
What to Remember While Using IntelliMute
Assistance Assistance
IntelliMute Button
IntelliMute works with both City and Auto Mute modes. Press and hold for
two seconds
Whenever your engine revs are below the activation point,
the dot next to the large character on the right side of the display
Secondary Icons Secondary Icons
in Icons will remain lit. Above the activation point, the dot will blink twice To Set the IntelliMute Activation Point
every two seconds. Press and hold Tone Visual Display
Below Activation Point Above Activation Point the IntelliMute Two beeps None
Main Icons
in Icons
button for two Main Icons
X K Ka Notice
VS c X K Ka V S c seconds.
Notice Intro Operation Customer Warranty
Intro Operation Customer Warranty Assistance
Assistance Rev yourMain Icons to
engine None Three bars will Intro Operation Customer
Assistance
Warranty
the level you wish flash in succession
If, for any reason, the unit stops sensing your engine’s revs, to set (recommend
Installation
Customer
Assistance
IntelliMute will indicate an error and automatically turn Off. slightly above idle)
1 Secondary Icons
2
Installation
Customer
Assistance
Secondary Icons
3
Intro Operation Customer Warranty Main Icons Main Icons
condary Icons
Assistance
The rev point you set will be stored in the unit’s memory when and hold revs steady
Notice Caution Warning
power is turned Off and recalled each time the power is turned On. for two seconds. Notice Caution Warning
Intro Operation Customer Warranty
Assistance
At the desired Three beeps All three bars flash
Intro Operation Customer Intro
Assistance
Warranty
Operation Customer
Assistance
Warranty
condary Icons
NOTE rev level, press three times
The rev point must be reset if you use your detector in a different vehicle. and release the 1 2
Installation
Customer
Assistance
3
Installation
Customer
Assistance
Notice
IntelliMute Secondary Icons Secondary Icons
button. Secondary Icons
NOTE Notice Caution Warning
Notice Caution Warning
Notice
When initially choosing your IntelliMute activation point, a setting
of approximately 300 to 600 RPMs above idle is recommended. NOTE
You can reset the activation point at any time to fit your individual If the unit is unable to sense usable pulses within three
Operation
Assistance preferences and driving style.
Customer Warranty
Notice
seconds or if you do not set a rev point within 20 seconds
of beginning these steps, IntelliMute will indicate an error
and automatically turn Off.
Installation Setting the IntelliMute Activation Point
Customer
Assistance
Tone Visual Display
Your detector must be installed in your vehicle. Four beeps E appears
CAUTION
Do not attempt to set the rev point while driving.
X K Ka V S E
Notice Caution
Your vehicle should be parked and idling.
Warning
IntelliMute must be turned on before setting the activation point.
You will hear a series of beeps as you follow the steps on page 11.
10 English Nothing Comes Close to a Cobra® 11

9. Your Detector
Settings Your Detector
Detection
Intro Operation Customer Warranty Intro Operation Customer Warranty
VG-2 and Spectre 1 Alert Settings
Assistance
Detection Assistance •
The detector is undetectable by police VG-2 and Spectre 1 radar detector Signals Detected
detectors and will alert you when such a device is in use near your vehicle.
The tables on the following pages show you the types of Signals your
During the alert, the unit continues to detect other signals. You can choose
whether or not you want your unit to show VG-2 and Spectre 1 alerts. detector will detect, as well as the visual alerts it provides for each of them.
Secondary Icons Secondary Icons
The factory setting is VG-2 and Spectre 1 alert Off. Audio Alerts
On/Off Indicator A distinctly different Alert tone is used for each type of signal detected
(including separate tones for each laser signal). For X, K, Ka and Ku band
X K Ka V S c Dim Button radar signals, the tones will repeat faster as you approach the signal
Notice Press and hold source. The repeat rate of the tones gives you useful information about
Notice
for two seconds
the signal detected. (See responding to alerts on page 16.)
To Turn VG-2 and Spectre 1 Alerts On and Off Visual Display
While no signal is being Tone Visual Display An indication of the type of signal detected will appear in the UltraBright
detected, press and data Display. During X, K, Ka and Ku alerts, a number will also appear,
hold the Dim button On = Two beeps V will blink twice in the display
for four seconds. indicating the strength of the signal detected. (1 = weakest, 5 = strongest)
Off = One beep V will blink once in the display
X Signal Detected K Signal Detected Ka Signal Detected Ku Signal Detected
Radar Alert Settings
The detector allows you to choose whether it will show alerts on the X, K, X K Ka V S 2 X K Ka V S 3 X K Ka V S 5 X K Ka V S 4
and Ku bands. The factory settings are: X Band and K Band On; Ku Band Off.
To Turn X Band On and Off During laser alerts the letter L will appear, instead of the signal strength indication.
While no signal is Tone Laser Signal Detected
Visual Display
being detected, press
and hold both the Dim X On = Two beeps X will blink twice in the display
and Mute buttons for
X K Ka V S L
X Off = One beep X will blink once in the display
four seconds.
To Turn K Band On and Off During VG-2 or Spectre 1 alerts, the letter V will appear. It will be steady
While no signal is
during VG-2 and blink during Spectre 1.
Tone Visual Display
being detected, press VG-2 Alert Signal Detected Spectre 1 Alert Signal Detected
and hold both the K On = Two beeps K will blink twice in the display
Mute and City buttons K Off = One beep K will blink once in the display
for four seconds. X K Ka V S c X K Ka V S c
To Turn Ku Band On and Off
During Safety Alert and Strobe Alert the letter S will appear. It will be
While no signal is being Tone Visual Display
detected, press and steady during a Safety Alert and will blink during a Strobe Alert.
hold the City button Ku On = Two beeps X and K will blink twice in the display Safety Alert Signal Detected Strobe Alert Signal Detected
for four seconds. Ku Off = One beep X and K will blink once in the display
X K Ka V S c X K Ka V S c
12 English Nothing Comes Close to a Cobra® 13

10. Your Detector
Detection Your Detector
Detection
Intro Operation Customer Warranty Intro Operation Customer Warranty
Assistance Assistance
Radar Signals and Visual Displays Strobe Alert Signals and Visual Displays
Type of Signal Visual Display Type of Signal Visual Display
X Band Radar X and Signal Strength 3M Opticom or Tomar* S Blinks
Secondary Icons K Band Radar K and Signal Strength Secondary Icons * Your detector provides 360˚ detection of this signal.
Ka Band Radar Ka and Signal Strength Strobe Alert Signal Detected
Ku Band Radar X K and Signal Strength
X K Ka V S c
X Signal Detected K Signal Detected Ka Signal Detected Ku Signal Detected
Notice Notice
X K Ka V S 2 X K Ka V S 3 X K Ka V S 5 X K Ka V S 4 Main Icons
Safety Alert Signals and Visual Displays
Type of Signal Visual Display
Laser Signals and Visual Displays Emergency Vehicles S is Steady
Type of Signal Visual Display Intro
Road Hazards
Operation Customer Warranty
S is Steady
Assistance
Main Icons
Trains S is Steady
LTI 20-20* L is Steady
LTI Ultra-Lyte* L is Steady Safety Alert Signal Detected
Kustom Signals ProLaser* L is Steady Secondary Icons X K Ka V S c
Intro
Kustom Signals ProLaser III*
Operation Customer Warranty
L is Steady
Assistance
* Your detector provides 360˚ detection of these signals.
NOTE
Laser Signal Detected
There are different tones for each Safety Alert.
Main Icons Notice
Secondary Icons
X K Ka V S L VG-2 and Spectre 1 Alert Signals and Visual Displays
Type of Signal Visual Display
NOTE Interceptor VG-2 V is Steady
Beep rate changes with different laser alerts. Intro Operation Customer
Assistance
Warranty
Notice Spectre 1 V Blinks
VG-2 Alert Signal Detected Spectre 1 Alert Signal Detected
Secondary Icons
X K Ka V S c X K Ka V S c
NOTE
There are different tones for each alert.
Notice
14 English Nothing Comes Close to a Cobra® 15