With or without Dox the amount of virus stays the same. Does this mean MRC2 is necessary
then?
Colors indicate range of gene expression min I.maxIs MRC2 necessary for BOVID-12 to infect
cells? Yes No Cannot tell.
Write a Fortran program to SOS take the name and ID number.pdfadvancesystem
Write a Fortran program to
SOS take the name and ID number of the user from keyboard entry,
create an external file and save it as Userlastillane IastzdigitsOtTD. bat ,
write into the created file: "This file was created for Userlame Develop your program based on
provided sample result below.
Sample result (green is keyboard entry).
Enter your first name.
John
Enter your last name.
Smith
Enter your ID number. (integer number only)
6789
Smith 89. txt must be created and include a single sentence..
Write a function that will take four parameters omega x0.pdfadvancesystem
Write a function that will take four parameters: omega , x0, phi, and a list of times; and which
outputs a list with the value of a harmonic oscillator at those times. i.e. it calculates x0cos(t+) for
all the t in the list. The following function rangef that generates a list of values between xmin and
xmax might be useful (it's the same one we just met in the def rangef (xmin,xmax,dx) : out =[]
steps = int ( round ((xxmaxxmin)/float(dx))) for step in range(steps ) : x= step*dx+xmin out.append
(x) return out def harmonic_oscillator (omega, x, phi, times): # write your code here.
Write a function that will take four parameters omega p.pdfadvancesystem
Write a function that will take four parameters: omega , ,phi, and a list of times; and which outputs
a list with the value of a harmonic oscillator at those times. i.e. it calculates x0cos(t+) for all the t in
the list.| The following function rangef that generates a list of values between xmin and x max
might be useful (it's the same one we just met in the notes)..
Write a generalpurpose program with loop and indexed addres.pdfadvancesystem
Write a general-purpose program with loop and indexed addressing
that adds 12h to 0th, 3rd , 7th , 11th ,15th ,19th , elements of a DWORD array.
For example, in array:
Array1 DWORD 12h, 13h, 14h,15h, 16h, 17h, 18h, 19h, 1ah, 1bh, 1ch, 1dh, 1eh, 1fh
becomes:
Array1 : 24h, 13h, 14h, 27h,16h,17h,18h, 2bh, 1ah, 1bh, 1ch, 2f, 1eh, 1fh
ONLY USE: "MOV" "JMP" "LOOP" "LAHF" "SAHF" "XCHG" "INC" "DEC" "ADD" "SUB" "NEG"
Instructions, otherwise I will thumb down..
Write a computer program in JAVA that hides a secret message.pdfadvancesystem
Write a computer program in JAVA that hides a secret message within an image file using
steganography. Your program should prompt the user for the path of the image file and the secret
message to hide, and then modify the image file by hiding the message within it. The program
should also have a function to retrieve the hidden message from the image file. Explain your code..
Write a Fortran program to 1 take the name and ID number of.pdfadvancesystem
Write a Fortran program to 1- take the name and ID number of the user from keyboard entry, 2-
create an external file and save it as useriastivame_Last2digitsofid.txt , 3- write into the created
file: "This file was created for UserName ." . Develop your program based on provided sample
result below: Smith_89.txt Smith_89. txt must be created and include a single sentence. This file
was created for John Smith..
Write a function called ApologyLine that take an integer c a.pdfadvancesystem
Write a function called ApologyLine that take an integer c and print message Sorry c times in a line
without space/new line. Please use single lower case letter as parameter name. #include using
namespace std; // function ApologyLine Line {{ for ( cout <; return; } int main 0{ int x=2
ApologyLine(x);//print SorrySorry return 0 }.
Write a C++ code that makes pyramid shape as long as user wa.pdfadvancesystem
Write a C++ code that makes pyramid shape as long as user wants (take input from user ). Use
only nested for loop . Similarly write a code for inverted shape of pyramid and similarly take input
from user (how long it is , depends on user). Then write a code that makes pyramid shape but
hollow from inside (take input from user) See the attach picture in following.
Assignonent :.
Write a Fortran program to SOS take the name and ID number.pdfadvancesystem
Write a Fortran program to
SOS take the name and ID number of the user from keyboard entry,
create an external file and save it as Userlastillane IastzdigitsOtTD. bat ,
write into the created file: "This file was created for Userlame Develop your program based on
provided sample result below.
Sample result (green is keyboard entry).
Enter your first name.
John
Enter your last name.
Smith
Enter your ID number. (integer number only)
6789
Smith 89. txt must be created and include a single sentence..
Write a function that will take four parameters omega x0.pdfadvancesystem
Write a function that will take four parameters: omega , x0, phi, and a list of times; and which
outputs a list with the value of a harmonic oscillator at those times. i.e. it calculates x0cos(t+) for
all the t in the list. The following function rangef that generates a list of values between xmin and
xmax might be useful (it's the same one we just met in the def rangef (xmin,xmax,dx) : out =[]
steps = int ( round ((xxmaxxmin)/float(dx))) for step in range(steps ) : x= step*dx+xmin out.append
(x) return out def harmonic_oscillator (omega, x, phi, times): # write your code here.
Write a function that will take four parameters omega p.pdfadvancesystem
Write a function that will take four parameters: omega , ,phi, and a list of times; and which outputs
a list with the value of a harmonic oscillator at those times. i.e. it calculates x0cos(t+) for all the t in
the list.| The following function rangef that generates a list of values between xmin and x max
might be useful (it's the same one we just met in the notes)..
Write a generalpurpose program with loop and indexed addres.pdfadvancesystem
Write a general-purpose program with loop and indexed addressing
that adds 12h to 0th, 3rd , 7th , 11th ,15th ,19th , elements of a DWORD array.
For example, in array:
Array1 DWORD 12h, 13h, 14h,15h, 16h, 17h, 18h, 19h, 1ah, 1bh, 1ch, 1dh, 1eh, 1fh
becomes:
Array1 : 24h, 13h, 14h, 27h,16h,17h,18h, 2bh, 1ah, 1bh, 1ch, 2f, 1eh, 1fh
ONLY USE: "MOV" "JMP" "LOOP" "LAHF" "SAHF" "XCHG" "INC" "DEC" "ADD" "SUB" "NEG"
Instructions, otherwise I will thumb down..
Write a computer program in JAVA that hides a secret message.pdfadvancesystem
Write a computer program in JAVA that hides a secret message within an image file using
steganography. Your program should prompt the user for the path of the image file and the secret
message to hide, and then modify the image file by hiding the message within it. The program
should also have a function to retrieve the hidden message from the image file. Explain your code..
Write a Fortran program to 1 take the name and ID number of.pdfadvancesystem
Write a Fortran program to 1- take the name and ID number of the user from keyboard entry, 2-
create an external file and save it as useriastivame_Last2digitsofid.txt , 3- write into the created
file: "This file was created for UserName ." . Develop your program based on provided sample
result below: Smith_89.txt Smith_89. txt must be created and include a single sentence. This file
was created for John Smith..
Write a function called ApologyLine that take an integer c a.pdfadvancesystem
Write a function called ApologyLine that take an integer c and print message Sorry c times in a line
without space/new line. Please use single lower case letter as parameter name. #include using
namespace std; // function ApologyLine Line {{ for ( cout <; return; } int main 0{ int x=2
ApologyLine(x);//print SorrySorry return 0 }.
Write a C++ code that makes pyramid shape as long as user wa.pdfadvancesystem
Write a C++ code that makes pyramid shape as long as user wants (take input from user ). Use
only nested for loop . Similarly write a code for inverted shape of pyramid and similarly take input
from user (how long it is , depends on user). Then write a code that makes pyramid shape but
hollow from inside (take input from user) See the attach picture in following.
Assignonent :.
Write a class called Window that contains the following info.pdfadvancesystem
Write a class called Window that contains the following information: 1. Private instance variables
for the height and width of the window (int). 2. A two-argument constructor to set each of the
instance variables above. If the height or width is negative, throw an IllegalArgumentException
stating the argument that is not correct. 3. Get and Set methods for each instance variable with the
same error detection as the constructor. public class Window {.
Write a C code that uses struct to create a userdefined typ.pdfadvancesystem
Write a C code that uses struct to create a user-defined type person with the following attributes:
char name [ int age double height double weight In your code declare a variable of type person
and initialize the attributes appropriately. Print your variable to the terminal using printf. A
suggested printout could be: John is 1.75mtall, aged 24 , and weighs 80kg Remember to #include
the necessary header files if they have not been included when you start a project in eclipse IDE.
There is nothing to submit for this task. But the skill will be needed later..
Write a 12 page report on igneous rock and how they are m.pdfadvancesystem
Write a 1-2 page report on igneous rock and - how they are made - What they are made of -
percentages of minerals? How do you know those minerals are there? - Discussion of the
processes which formed your rock is absent - Igneous rock's texture and composition - describe
and explain the process that likely formed the igneous rock, along with the likely environment
and/or tectonic setting. - Discussion of the processes which occurred to your rock after its
formation is absent. E.g., what geologic processes acted on the rock and led to its present-day
position in the landscape, ect. - Reflect on the geological processes that brought the rock to a
place in which humans could access it. Asap please..
WQ4 Coevolution of Central American ants in the Pseudomyrme.pdfadvancesystem
WQ4. Coevolution of Central American ants in the Pseudomyrmex ferrugineus group and swollen-
thorn acacias (Vachellia species) is a type of ____, because _____.
Group of answer choices
adaptation; the Vachellia species develop swollen thorns for the ants to eat.
mutualism; ants receive nesting space in the form of swollen thorns and food from nectaries and
leaf-tip food bodies, and Vachellia trees receive protections from ants by removing or repelling
herbivores and competing plants.
natural selection; ants find the swollen thorn of Vachellia perfect nesting space.
mosaic; ants damage the swollen thorn of Vachellia while nesting and the trees kill the ants with
their sharp thorns..
With the following companies Apple Caterpillar Consolidat.pdfadvancesystem
With the following companies (Apple, Caterpillar, Consolidated Edison, Northern Trust, Macy's)
and market analysis in mind, construct a complete portfolio that includes the following:
Compare the risk/return trade-off on the investments. Keep in mind the rates of return for
shareholders on the proposed investment portfolio..
Would the current answer be considered correct 2 Identify .pdfadvancesystem
Would the current answer be considered correct?
2. Identify the remaining two characteristics for these horizontal fold axis folds as depicted in
roadside outcrop cross sections... Axial Plane...A (for upright), B (for inclined), C (for overturned).
D (for recumbent), Interlimb angle... E (for open), F (for gentle), G (for moderate), H (for tight), I
(for isoclinal).
WQ3 Considering that you know about natural selection is o.pdfadvancesystem
WQ3: Considering that you know about natural selection, is organ-level selection likely to exist?
Group of answer choices A.Yes, all 3 criteria are satisfied for selection among organs B.Yes,
because organs have their own rules C.No, because organs do not vary among individuals D.No,
because organs do not reproduce themselves E.No, because organs are not heritable over
generations.
would be earned How much of the total is simple interest an.pdfadvancesystem
would be earned? How much of the total is simple interest and how much results from
compounding of interest? If you deposit $15,000 today into an account earning an annual rate of
return of 10%, in the third year how much interest would be earned? (Round to the nearest cent.).
write 350400 WORDS AND EXPLAIN BRIEFLY lapter 7 How Touris.pdfadvancesystem
write 350-400 WORDS AND EXPLAIN BRIEFLY
lapter 7- How Tourism Works Attractions drive tourism and if a destination does not have a
sufficient breadth and depth of attractions it will struggle. Outline a region that is lacking in
attractions and provide 23 examples of how the region could develop its tourist sector..
World vegetation maps and world climate maps are very simila.pdfadvancesystem
World vegetation maps and world climate maps are very similar. Why? Because climate maps are
based on vegetation maps. Because vegetation maps are based on climate maps. Because
climate determines where you find different vegetation types. Because vegetation types determine
climate. 25 points The author states that he mapped the sols of New Brunswick, Canada using
aerial photographs. Why was he able to use aerial photographs to describe the distribution of
sols? He used ground penetration radar to "see" under the ground suiface. He could recognize the
major vegetation types from the aerial photographs and knew that each vegetason type grew in a
spocific soil type. He was too busy to do good joband basically only guessed the soilk- He could
see the soils from the air..
Working with Dictionaries and ListsSets Modules you can use.pdfadvancesystem
Working with Dictionaries and Lists/Sets
Modules you can use:
argparse, reLinks, osLinks, collectionsLinks, sysLinks
General Guidelines (Steps 1-6)
You have more flexibility to implement your own function names and logic in these programs.
The data files you need for this assignment can obtained from:
HUGO_genes.txt, chr21_genes.txt
Create an output directory inside your assignment4 directory called "OUTPUT" for result files, so
that they will not mix with your programs. Output from your programs will be here!
Pay close attention to how you'll run the run_lints.sh script (see below)
Your program must implement command line options for the infiles it must open, but for
testing purposes it should run by default, so if no command line option is passed at the command
line, the program will still run. This will help in the grading of your program.
Create a Python Module called called io_utils.py. Put this io_utils.py Module in a subdirectory
named assignment4 inside your assignment4 top-level directory (see the tree below). Anytime a
file needs to be opened (read or write) in your programs in this assignment, the program should
call on this module's function get_filehandle. You can then use io_utils.get_filehandle by doing
this at the top of your programs:
from assignment4 import io_utils
# I can then use the module's get_filehandle() function by:
fh_in = io_utils.get_filehandle(infile1, "r") # note the function call "io_utils.get_filehandle()"
You can also import this way (Either way is acceptable, but I will assume in this assignment you
did it the way below. I think this is better for Pycharm)
from assignment4.io_utils import get_filehandle
# I can then use the module's get_filehandle() function by:
fh_in = get_filehandle(infile1, "r") # note the function call "get_filehandle()"
Your final submission must have the following files in bold and must use this directory structure.
Make sure you put a blank __init__.py where I've denoted below, e.g.: assignment4/
assignment4 (see below)
Make sure you have __init__.py only in assignment4/assignment4 folder, the tests folder, the unit
folder, and not in the assignment4 main folder.
Information on Source files
The chr21_genes.txt file lists genes from human chromosome 21, in their order along the
chromosome, as described in Hattori et al. (Nature 405, 311-319)Links to an external site.. For
each gene, the file gives the gene symbol, description and category. The fields are separated by
tabs. You will need to get the the meaning of each category. You can find these meanings in the
original paperLinks to an external site., under the "Gene categories" section. Create a file named
chr21_genes_categories.txt that store this information in tab separated fields:
This will be used in program #2
The HUGO_genes.txt file lists all human genes having official symbol approved by the HUGO
gene nomenclature committeeLinks to an external site. (some have probably changed by now).
For each gene, the file gives its symbo.
Working individually or in pairs you will apply what you ha.pdfadvancesystem
Working individually or in pairs, you will apply what you have learned about contracts and
employment law to a past situation between Dustin Byfuglien, the Winnipeg Jets defensemen and
the Winnipeg Jets organization using only the information below. Background Story In 2019, the
Winnipeg Jets and Dustin Byfuglien went before an arbitrator (retired Judge) to discuss if Byfuglien
should be paid his $8 million USD salary as he was injured. There were a few issues at play here
for the arbitrator to use for a judgement. - The team doctor and Byfuglien signed off a document
stating that Dustin was healthy at the end of the season in May 2019. Every player has to sign off
on the physical as well as the doctor. Both Byfuglien and the doctor signed off meaning that at the
end of the season, he was deemed healthy. - In August 2019, Byfuglien returned to Winnipeg and
asked Jets management for time to think about his playing future. He did not report to training
camp and the Jets gave him the time and space he needed to make his decision. - Several weeks
passed without any commitment from Dustin. The Jets then suspended him without pay at the
start of the 2019 season in October. The Jets did this for salary cap reasons and because you
cannot pay someone who has not reported to work. - Unknow to the Jets, Byfuglien independently
went and had ankle surgery the summer of 2019. He told the Jets about the surgery after the
operation. He also said his foot was broken and the team did not know about it nor did he tell
them. As far as the timeline goes, it seems like the Jets were set on giving Byfuglien the time and
space needed to make an informed decision about his future. There is no evidence that Byfuglien
did not re-injure his ankle or break his foot over the 2019 summer. An aside about ankles: people
with a history of ankle injuries may need to go physio more than once. With a bad sprain, at some
point the joint is compromised and the ankle is permanently damaged and will always sprain/roll
easily now. If this is the case with Byfuglien, and we don't know the nature of his ankle injury, this
could be why Byfuglien developed more ankle issues over the summer or his ankle never fully
healed. Byfuglien's lawyer had argued in arbitration that Byfuglien was not suspended because he
was injured, but because he did not report for training camp. Had he reported to training camp and
then told the Jets his ankle was bothering him, he would have been fine. The suspendable act was
not showing up. Byfuglien wanted to get paid, but the facts are he did not show up at camp and to
top it off, he got surgery on his ankle without telling the Jets.5. Was Dustin on strike or was it
implied repudiation or neither? Did the Jets lock him out in this dispute? (2 marks) 6. As the
arbitrator, make your decision and explain why? Give two specific legal reasons with details (4
marks).
Without using a function write the JavaScript code so that w.pdfadvancesystem
Without using a function write the JavaScript code so that when you to mouse over the image
of A, both the image of B and the image of A are replaced by an image of a C.
DO NOT USE A FUNCTION CALL
Hint: You will need two complete statements to change two images and will use this.src and
getElementById(the id goes here).src (.src is for images).
with thefour approches to Internation human resource managem.pdfadvancesystem
with thefour approches to Internation human resource management. what does the following mean
please give examples.
1. Ethnocentric- An ethnocentric approach involves exporting the organizations home country
practices and policies to foreign locations.
2. Polycentric- A polycentric approach involves allowing each location to develop its own practices
and policies that are consistent with the local culture and workforce characteristics. It is the
process of hiring locals to fill the vacancies of a firm.
3. Regiocentric- Regiocentric approach involves developing standardized practices and policies by
geographic region; therefore, there is some consistency and efficiency within operations.
4. Geocentric- A geocentric approach involves developing one set of global practices and policies
that are applied at all locations..
Why did the marine trophic index continue to decline after t.pdfadvancesystem
Why did the marine trophic index continue to decline after the cod fishery was closed in 1992?
There was a loss of prey due to fishing down the food chain. Increases in nutrient runoff depleted
marine oxygen levels. Predatory fish were not able to survive a warming event. Fishing operations
ignored the moratorium on cod fishing..
With regard to the Pacific the phrase tyranny of distance.pdfadvancesystem
With regard to the Pacific, the phrase "tyranny of distance" refers to what?
A) The enormous cost in time and fuel to move anything across the Pacific
B) The spatial extent of Japan's WWII island empire
C) The difficulties involved in laying undersea fiber optic cables over such distances
D) Name of a famous Tahitian ("Poly-rock") band from the early 2000s.
Wildhorse Co had the following assets on January 12025 Du.pdfadvancesystem
Wildhorse Co. had the following assets on January 1,2025. During 2025, each of the assets was
removed from service. The machinery was retired on January 1. The forklift was sold on June 30
for $12,900. The truck was discarded on December 31. Journalize all entries required on the
above dates, including entries to update depreciation, where applicable, on disposed assets. The
company uses straight-line depreciation. All depreciation was up to date as of December 31, 2024.
(List all debit entries before credit entries. Credit account titles are outomatically indented when
the amount is entered. Do not indent manually. If no entry is required, select "No Entry" for the
account titles and enter O for the amounts.).
With respect to the shoulder latissimus dorsi is a twojoin.pdfadvancesystem
With respect to the shoulder, latissimus dorsi is a two-joint muscle, crossing both the
glenohumeral and scapulo-thoracic joints and so, all of its force would be available for action on
the humerus, with an additional effect on the scapula. Its fibres do not pass in a straight line to the
humerus. Rather, they wrap around the posterior chest wall, and their orientation is governed
largely by the position of the arm. Their line of action is not, for practical purposes, defined by the
caudal attachments. Rather, it would be a line passing from the humerus tangential to the chest
wall. To model the latissimus dorsi, therefore, would require specification of the position of the
humerus, and a knowledge of the size and curvature of the chest wall. These issues were not
addressed in the present study, although they have been examined in detail by Hogfors et al. [12].
However, valid estima- The iliac fibres have the most direct and most extensive action. They span
the entire lumbar spine and, therefore, act on every segment. Since they are orientated steeply,
most of their action is expressed as a sagittal vector (Table 2). Endowed with a moment arm of 4
cm, these fibres might provide an average extensor moment of 1.3Nm, with a range of 0.52.8Nm
(Table 3 )..
Why should organizations be interested in ISO 20400 What ar.pdfadvancesystem
Why should organizations be interested in ISO 20400? What are the challenges that organizations
face implementing ISO 20400?
What are some major corporations doing in terms of sustainable purchasing?
How have retailer and vendor relationships shifted since the Covid-19 pandemic hit in 2020? What
changes, if any, do you think are here for the long term?.
Why is Human Capital Management important in an organization.pdfadvancesystem
Why is Human Capital Management important in an organizations success? Human Capital
Management (HCM) is closely related with Strategic HRM, by obtaining, analyzing, and reporting
on data that the direction of people are going in a management strategy. So, when employers say
that employees are the greatest assets of their business, they mean it i... Preview Post.
Write a class called Window that contains the following info.pdfadvancesystem
Write a class called Window that contains the following information: 1. Private instance variables
for the height and width of the window (int). 2. A two-argument constructor to set each of the
instance variables above. If the height or width is negative, throw an IllegalArgumentException
stating the argument that is not correct. 3. Get and Set methods for each instance variable with the
same error detection as the constructor. public class Window {.
Write a C code that uses struct to create a userdefined typ.pdfadvancesystem
Write a C code that uses struct to create a user-defined type person with the following attributes:
char name [ int age double height double weight In your code declare a variable of type person
and initialize the attributes appropriately. Print your variable to the terminal using printf. A
suggested printout could be: John is 1.75mtall, aged 24 , and weighs 80kg Remember to #include
the necessary header files if they have not been included when you start a project in eclipse IDE.
There is nothing to submit for this task. But the skill will be needed later..
Write a 12 page report on igneous rock and how they are m.pdfadvancesystem
Write a 1-2 page report on igneous rock and - how they are made - What they are made of -
percentages of minerals? How do you know those minerals are there? - Discussion of the
processes which formed your rock is absent - Igneous rock's texture and composition - describe
and explain the process that likely formed the igneous rock, along with the likely environment
and/or tectonic setting. - Discussion of the processes which occurred to your rock after its
formation is absent. E.g., what geologic processes acted on the rock and led to its present-day
position in the landscape, ect. - Reflect on the geological processes that brought the rock to a
place in which humans could access it. Asap please..
WQ4 Coevolution of Central American ants in the Pseudomyrme.pdfadvancesystem
WQ4. Coevolution of Central American ants in the Pseudomyrmex ferrugineus group and swollen-
thorn acacias (Vachellia species) is a type of ____, because _____.
Group of answer choices
adaptation; the Vachellia species develop swollen thorns for the ants to eat.
mutualism; ants receive nesting space in the form of swollen thorns and food from nectaries and
leaf-tip food bodies, and Vachellia trees receive protections from ants by removing or repelling
herbivores and competing plants.
natural selection; ants find the swollen thorn of Vachellia perfect nesting space.
mosaic; ants damage the swollen thorn of Vachellia while nesting and the trees kill the ants with
their sharp thorns..
With the following companies Apple Caterpillar Consolidat.pdfadvancesystem
With the following companies (Apple, Caterpillar, Consolidated Edison, Northern Trust, Macy's)
and market analysis in mind, construct a complete portfolio that includes the following:
Compare the risk/return trade-off on the investments. Keep in mind the rates of return for
shareholders on the proposed investment portfolio..
Would the current answer be considered correct 2 Identify .pdfadvancesystem
Would the current answer be considered correct?
2. Identify the remaining two characteristics for these horizontal fold axis folds as depicted in
roadside outcrop cross sections... Axial Plane...A (for upright), B (for inclined), C (for overturned).
D (for recumbent), Interlimb angle... E (for open), F (for gentle), G (for moderate), H (for tight), I
(for isoclinal).
WQ3 Considering that you know about natural selection is o.pdfadvancesystem
WQ3: Considering that you know about natural selection, is organ-level selection likely to exist?
Group of answer choices A.Yes, all 3 criteria are satisfied for selection among organs B.Yes,
because organs have their own rules C.No, because organs do not vary among individuals D.No,
because organs do not reproduce themselves E.No, because organs are not heritable over
generations.
would be earned How much of the total is simple interest an.pdfadvancesystem
would be earned? How much of the total is simple interest and how much results from
compounding of interest? If you deposit $15,000 today into an account earning an annual rate of
return of 10%, in the third year how much interest would be earned? (Round to the nearest cent.).
write 350400 WORDS AND EXPLAIN BRIEFLY lapter 7 How Touris.pdfadvancesystem
write 350-400 WORDS AND EXPLAIN BRIEFLY
lapter 7- How Tourism Works Attractions drive tourism and if a destination does not have a
sufficient breadth and depth of attractions it will struggle. Outline a region that is lacking in
attractions and provide 23 examples of how the region could develop its tourist sector..
World vegetation maps and world climate maps are very simila.pdfadvancesystem
World vegetation maps and world climate maps are very similar. Why? Because climate maps are
based on vegetation maps. Because vegetation maps are based on climate maps. Because
climate determines where you find different vegetation types. Because vegetation types determine
climate. 25 points The author states that he mapped the sols of New Brunswick, Canada using
aerial photographs. Why was he able to use aerial photographs to describe the distribution of
sols? He used ground penetration radar to "see" under the ground suiface. He could recognize the
major vegetation types from the aerial photographs and knew that each vegetason type grew in a
spocific soil type. He was too busy to do good joband basically only guessed the soilk- He could
see the soils from the air..
Working with Dictionaries and ListsSets Modules you can use.pdfadvancesystem
Working with Dictionaries and Lists/Sets
Modules you can use:
argparse, reLinks, osLinks, collectionsLinks, sysLinks
General Guidelines (Steps 1-6)
You have more flexibility to implement your own function names and logic in these programs.
The data files you need for this assignment can obtained from:
HUGO_genes.txt, chr21_genes.txt
Create an output directory inside your assignment4 directory called "OUTPUT" for result files, so
that they will not mix with your programs. Output from your programs will be here!
Pay close attention to how you'll run the run_lints.sh script (see below)
Your program must implement command line options for the infiles it must open, but for
testing purposes it should run by default, so if no command line option is passed at the command
line, the program will still run. This will help in the grading of your program.
Create a Python Module called called io_utils.py. Put this io_utils.py Module in a subdirectory
named assignment4 inside your assignment4 top-level directory (see the tree below). Anytime a
file needs to be opened (read or write) in your programs in this assignment, the program should
call on this module's function get_filehandle. You can then use io_utils.get_filehandle by doing
this at the top of your programs:
from assignment4 import io_utils
# I can then use the module's get_filehandle() function by:
fh_in = io_utils.get_filehandle(infile1, "r") # note the function call "io_utils.get_filehandle()"
You can also import this way (Either way is acceptable, but I will assume in this assignment you
did it the way below. I think this is better for Pycharm)
from assignment4.io_utils import get_filehandle
# I can then use the module's get_filehandle() function by:
fh_in = get_filehandle(infile1, "r") # note the function call "get_filehandle()"
Your final submission must have the following files in bold and must use this directory structure.
Make sure you put a blank __init__.py where I've denoted below, e.g.: assignment4/
assignment4 (see below)
Make sure you have __init__.py only in assignment4/assignment4 folder, the tests folder, the unit
folder, and not in the assignment4 main folder.
Information on Source files
The chr21_genes.txt file lists genes from human chromosome 21, in their order along the
chromosome, as described in Hattori et al. (Nature 405, 311-319)Links to an external site.. For
each gene, the file gives the gene symbol, description and category. The fields are separated by
tabs. You will need to get the the meaning of each category. You can find these meanings in the
original paperLinks to an external site., under the "Gene categories" section. Create a file named
chr21_genes_categories.txt that store this information in tab separated fields:
This will be used in program #2
The HUGO_genes.txt file lists all human genes having official symbol approved by the HUGO
gene nomenclature committeeLinks to an external site. (some have probably changed by now).
For each gene, the file gives its symbo.
Working individually or in pairs you will apply what you ha.pdfadvancesystem
Working individually or in pairs, you will apply what you have learned about contracts and
employment law to a past situation between Dustin Byfuglien, the Winnipeg Jets defensemen and
the Winnipeg Jets organization using only the information below. Background Story In 2019, the
Winnipeg Jets and Dustin Byfuglien went before an arbitrator (retired Judge) to discuss if Byfuglien
should be paid his $8 million USD salary as he was injured. There were a few issues at play here
for the arbitrator to use for a judgement. - The team doctor and Byfuglien signed off a document
stating that Dustin was healthy at the end of the season in May 2019. Every player has to sign off
on the physical as well as the doctor. Both Byfuglien and the doctor signed off meaning that at the
end of the season, he was deemed healthy. - In August 2019, Byfuglien returned to Winnipeg and
asked Jets management for time to think about his playing future. He did not report to training
camp and the Jets gave him the time and space he needed to make his decision. - Several weeks
passed without any commitment from Dustin. The Jets then suspended him without pay at the
start of the 2019 season in October. The Jets did this for salary cap reasons and because you
cannot pay someone who has not reported to work. - Unknow to the Jets, Byfuglien independently
went and had ankle surgery the summer of 2019. He told the Jets about the surgery after the
operation. He also said his foot was broken and the team did not know about it nor did he tell
them. As far as the timeline goes, it seems like the Jets were set on giving Byfuglien the time and
space needed to make an informed decision about his future. There is no evidence that Byfuglien
did not re-injure his ankle or break his foot over the 2019 summer. An aside about ankles: people
with a history of ankle injuries may need to go physio more than once. With a bad sprain, at some
point the joint is compromised and the ankle is permanently damaged and will always sprain/roll
easily now. If this is the case with Byfuglien, and we don't know the nature of his ankle injury, this
could be why Byfuglien developed more ankle issues over the summer or his ankle never fully
healed. Byfuglien's lawyer had argued in arbitration that Byfuglien was not suspended because he
was injured, but because he did not report for training camp. Had he reported to training camp and
then told the Jets his ankle was bothering him, he would have been fine. The suspendable act was
not showing up. Byfuglien wanted to get paid, but the facts are he did not show up at camp and to
top it off, he got surgery on his ankle without telling the Jets.5. Was Dustin on strike or was it
implied repudiation or neither? Did the Jets lock him out in this dispute? (2 marks) 6. As the
arbitrator, make your decision and explain why? Give two specific legal reasons with details (4
marks).
Without using a function write the JavaScript code so that w.pdfadvancesystem
Without using a function write the JavaScript code so that when you to mouse over the image
of A, both the image of B and the image of A are replaced by an image of a C.
DO NOT USE A FUNCTION CALL
Hint: You will need two complete statements to change two images and will use this.src and
getElementById(the id goes here).src (.src is for images).
with thefour approches to Internation human resource managem.pdfadvancesystem
with thefour approches to Internation human resource management. what does the following mean
please give examples.
1. Ethnocentric- An ethnocentric approach involves exporting the organizations home country
practices and policies to foreign locations.
2. Polycentric- A polycentric approach involves allowing each location to develop its own practices
and policies that are consistent with the local culture and workforce characteristics. It is the
process of hiring locals to fill the vacancies of a firm.
3. Regiocentric- Regiocentric approach involves developing standardized practices and policies by
geographic region; therefore, there is some consistency and efficiency within operations.
4. Geocentric- A geocentric approach involves developing one set of global practices and policies
that are applied at all locations..
Why did the marine trophic index continue to decline after t.pdfadvancesystem
Why did the marine trophic index continue to decline after the cod fishery was closed in 1992?
There was a loss of prey due to fishing down the food chain. Increases in nutrient runoff depleted
marine oxygen levels. Predatory fish were not able to survive a warming event. Fishing operations
ignored the moratorium on cod fishing..
With regard to the Pacific the phrase tyranny of distance.pdfadvancesystem
With regard to the Pacific, the phrase "tyranny of distance" refers to what?
A) The enormous cost in time and fuel to move anything across the Pacific
B) The spatial extent of Japan's WWII island empire
C) The difficulties involved in laying undersea fiber optic cables over such distances
D) Name of a famous Tahitian ("Poly-rock") band from the early 2000s.
Wildhorse Co had the following assets on January 12025 Du.pdfadvancesystem
Wildhorse Co. had the following assets on January 1,2025. During 2025, each of the assets was
removed from service. The machinery was retired on January 1. The forklift was sold on June 30
for $12,900. The truck was discarded on December 31. Journalize all entries required on the
above dates, including entries to update depreciation, where applicable, on disposed assets. The
company uses straight-line depreciation. All depreciation was up to date as of December 31, 2024.
(List all debit entries before credit entries. Credit account titles are outomatically indented when
the amount is entered. Do not indent manually. If no entry is required, select "No Entry" for the
account titles and enter O for the amounts.).
With respect to the shoulder latissimus dorsi is a twojoin.pdfadvancesystem
With respect to the shoulder, latissimus dorsi is a two-joint muscle, crossing both the
glenohumeral and scapulo-thoracic joints and so, all of its force would be available for action on
the humerus, with an additional effect on the scapula. Its fibres do not pass in a straight line to the
humerus. Rather, they wrap around the posterior chest wall, and their orientation is governed
largely by the position of the arm. Their line of action is not, for practical purposes, defined by the
caudal attachments. Rather, it would be a line passing from the humerus tangential to the chest
wall. To model the latissimus dorsi, therefore, would require specification of the position of the
humerus, and a knowledge of the size and curvature of the chest wall. These issues were not
addressed in the present study, although they have been examined in detail by Hogfors et al. [12].
However, valid estima- The iliac fibres have the most direct and most extensive action. They span
the entire lumbar spine and, therefore, act on every segment. Since they are orientated steeply,
most of their action is expressed as a sagittal vector (Table 2). Endowed with a moment arm of 4
cm, these fibres might provide an average extensor moment of 1.3Nm, with a range of 0.52.8Nm
(Table 3 )..
Why should organizations be interested in ISO 20400 What ar.pdfadvancesystem
Why should organizations be interested in ISO 20400? What are the challenges that organizations
face implementing ISO 20400?
What are some major corporations doing in terms of sustainable purchasing?
How have retailer and vendor relationships shifted since the Covid-19 pandemic hit in 2020? What
changes, if any, do you think are here for the long term?.
Why is Human Capital Management important in an organization.pdfadvancesystem
Why is Human Capital Management important in an organizations success? Human Capital
Management (HCM) is closely related with Strategic HRM, by obtaining, analyzing, and reporting
on data that the direction of people are going in a management strategy. So, when employers say
that employees are the greatest assets of their business, they mean it i... Preview Post.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
"Protectable subject matters, Protection in biotechnology, Protection of othe...
With or without Dox the amount of virus stays the same Does.pdf
1. With or without Dox the amount of virus stays the same. Does this mean MRC2 is necessary
then?
Colors indicate range of gene expression min I.maxIs MRC2 necessary for BOVID-12 to infect
cells? Yes No Cannot tell