Flexible cables for gravity-fed collector in basket.
Conductor: Tinned copper conductor, flexible cl.5 IEC 60228 - Specially designed for mobile application.
Insulation: Micro filtered HEPR rubber compound better than 3GI3.
Cores Identification: Black with printed numbers+1 green/yellow.
Outer Sheath: Special CSP compound - High density specially.
developed compound UV resistant, lubricants resistant
CAT 6 U UTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6 U UTP cables are suitable for basic voice and data installations up to 250 MHz.
Construction
- 23 AWG Bare Copper
- PE Insulation
- Pair Separator PE
- Outer Sheath PVC, HFFR or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-6-1
Application
- IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T, IEEE 802.5 16 MB, ISDN, TPDDI,
- ATM Power over Ethernet (PoE) / PoE
CAT 6 F UTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6 F UTP cables are suitable for basic voice and data installations up to 250 MHz.
Construction
- 23 AWG Bare Copper
- PE Insulation
- Pair Separator PE
- Polyester Band
- Tinned Copper Drain Wire
- Al-Pet Foil 100% Coverage
- Outer Sheath PVC,HFFR* or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-5-1
Application
- IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T, IEEE 802.5 16 MB, ISDN, TPDDI,
- ATM Power over Ethernet (PoE) / PoE+
Cat6 sf utp data lan cable network - upcomFatih BATAL
CAT 6 SF UTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6 SF UTP cables are suitable for basic voice and data installations up to 250 MHz.
Construction
- 23 AWG Bare Copper
- PE Insulation
- Pair Seperator PE
- Al-Pet Foil 100% Coverage
- Tinned Copper Wire Braiding
- Outer Sheath PVC, HFFR* or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-5-1
CAT 6A F FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6A F FTP cables are suitable for basic voice and data installations up to 250 MHz.
CAT 5e F/UTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class D applications like Ethernet, Fast Ethernet, Gigabit Ethernet. Cat 5e F/UTP cables are suitable for basic voice and data installations up to 100 MHz.
Construction
- 24 AWG Bare Copper
- PE Insulation
- Pes band 100% Coverage
- Tinned Copper Drain Wire
- Al-Pet Foil 100% Coverage
- Outer Sheath PVC,HFFR* or PE
Compliance
- IEC 60754-2; EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-3-1
Flexible cables for gravity-fed collector in basket.
Conductor: Tinned copper conductor, flexible cl.5 IEC 60228 - Specially designed for mobile application.
Insulation: Micro filtered HEPR rubber compound better than 3GI3.
Cores Identification: Black with printed numbers+1 green/yellow.
Outer Sheath: Special CSP compound - High density specially.
developed compound UV resistant, lubricants resistant
CAT 6 U UTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6 U UTP cables are suitable for basic voice and data installations up to 250 MHz.
Construction
- 23 AWG Bare Copper
- PE Insulation
- Pair Separator PE
- Outer Sheath PVC, HFFR or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-6-1
Application
- IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T, IEEE 802.5 16 MB, ISDN, TPDDI,
- ATM Power over Ethernet (PoE) / PoE
CAT 6 F UTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6 F UTP cables are suitable for basic voice and data installations up to 250 MHz.
Construction
- 23 AWG Bare Copper
- PE Insulation
- Pair Separator PE
- Polyester Band
- Tinned Copper Drain Wire
- Al-Pet Foil 100% Coverage
- Outer Sheath PVC,HFFR* or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-5-1
Application
- IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T, IEEE 802.5 16 MB, ISDN, TPDDI,
- ATM Power over Ethernet (PoE) / PoE+
Cat6 sf utp data lan cable network - upcomFatih BATAL
CAT 6 SF UTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6 SF UTP cables are suitable for basic voice and data installations up to 250 MHz.
Construction
- 23 AWG Bare Copper
- PE Insulation
- Pair Seperator PE
- Al-Pet Foil 100% Coverage
- Tinned Copper Wire Braiding
- Outer Sheath PVC, HFFR* or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-5-1
CAT 6A F FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 6A F FTP cables are suitable for basic voice and data installations up to 250 MHz.
CAT 5e F/UTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class D applications like Ethernet, Fast Ethernet, Gigabit Ethernet. Cat 5e F/UTP cables are suitable for basic voice and data installations up to 100 MHz.
Construction
- 24 AWG Bare Copper
- PE Insulation
- Pes band 100% Coverage
- Tinned Copper Drain Wire
- Al-Pet Foil 100% Coverage
- Outer Sheath PVC,HFFR* or PE
Compliance
- IEC 60754-2; EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-3-1
The Xtreme Marine Series XM5 watt bar lights are a high
output LED with specifically designed circuitry to service
under high temperatures making these lights ideal for heavy
industry applications such as mining and remote farming in
the outback of our country.
CAT 5e U/UTP cables are produced according to ISO IEC 61156-5 and TIA 568B requirements, an excellent choice to support all Class D applications like Ethernet, Fast Ethernet, Gigabit Ethernet. Cat 5e U/UTP cables are suitable for basic voice and data installations up to 100 MHz.
Construction
- 24 AWG Bare Copper
- PE Insulation
- Outer Sheath PVC,HFFR* or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-3-1
Application
- IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T, IEEE 802.5 16 MB, ISDN, TPDDI,
- ATM Power over Ethernet (PoE) / PoE+
CAT 7 S FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choise to support all Class F applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 7 S FTP cables are suitable for data installations up to 900 MHz. CAT 7 S FTP cable has an S/FTP construction with individual pair al-Pet foil and an overall tinned copper wire braiding offering a superior performance.
Construction
- 23 AWG Bare Copper
- Skin/Foam/Skin PE Insulation
- Al-Pet Foil 100% Coverage
- Tinned Copper Drain Wire
- Tinned Copper Wire Braiding
- Outer Sheath PVC, HFFR* or PE
CAT 7A S FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class F applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 7A S FTP cables are suitable for data installations up to 1200 MHz. CAT 7A S FTP cable has an S/FTP construction with individual pair Al-Pet foil and an overall tinned copper wire braiding offering a superior performance.
CAT 7A+ S FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class F applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 7A+ S FTP cables are suitable for data installations up to 1500 MHz. CAT 7A+ S FTP cable has an S/FTP construction with individual pair Al-Pet foil and an overall tinned copper wire braiding offering a superior performance.
The Xtreme Marine Series XM5 watt bar lights are a high
output LED with specifically designed circuitry to service
under high temperatures making these lights ideal for heavy
industry applications such as mining and remote farming in
the outback of our country.
CAT 5e U/UTP cables are produced according to ISO IEC 61156-5 and TIA 568B requirements, an excellent choice to support all Class D applications like Ethernet, Fast Ethernet, Gigabit Ethernet. Cat 5e U/UTP cables are suitable for basic voice and data installations up to 100 MHz.
Construction
- 24 AWG Bare Copper
- PE Insulation
- Outer Sheath PVC,HFFR* or PE
Compliance
- EIA/TIA-568-C.2
- ISO/IEC 11801 2nd ed
- IEC 61156-5 , EN 50173-1
- EN 50288-3-1
Application
- IEEE 802.3: 10Base-T, 100Base-T, 1000Base-T, 10GBase-T, IEEE 802.5 16 MB, ISDN, TPDDI,
- ATM Power over Ethernet (PoE) / PoE+
CAT 7 S FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choise to support all Class F applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 7 S FTP cables are suitable for data installations up to 900 MHz. CAT 7 S FTP cable has an S/FTP construction with individual pair al-Pet foil and an overall tinned copper wire braiding offering a superior performance.
Construction
- 23 AWG Bare Copper
- Skin/Foam/Skin PE Insulation
- Al-Pet Foil 100% Coverage
- Tinned Copper Drain Wire
- Tinned Copper Wire Braiding
- Outer Sheath PVC, HFFR* or PE
CAT 7A S FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class F applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 7A S FTP cables are suitable for data installations up to 1200 MHz. CAT 7A S FTP cable has an S/FTP construction with individual pair Al-Pet foil and an overall tinned copper wire braiding offering a superior performance.
CAT 7A+ S FTP cables are produced according to ISO IEC 61156-5 and TIA 568-C.2 requirements, an excellent choice to support all Class F applications like Ethernet, Fast Ethernet, Gigabit Ethernet. CAT 7A+ S FTP cables are suitable for data installations up to 1500 MHz. CAT 7A+ S FTP cable has an S/FTP construction with individual pair Al-Pet foil and an overall tinned copper wire braiding offering a superior performance.
Emmvee Crystal’s off-grid modules are beneficial in grid systems where power fluctuations are prevalent. Off-grid modules provide power as a backup when no active supply of power is possible. Some of the salient features of the off-grid modules are:
1. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
2. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
3. Excellent operating temperature range.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. Optimized normal operating cell temperature so that there is no hindrance in an optimized throughput from the product.
72 Cell Modules and 60 cell modules (multi-crystalline)Emmvee India
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules: Emmvee India
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
Nếu không tự tạo ra điện thì quý khách đang phải thanh toán chi phí cho việc sử dụng nó!
Bộ biến tần năng lượng mặt trời qua mạng Wifi dòng sản phẩm cho gia đình của Delta tiêu thụ điện áp thấp nhất khi khởi động (35 vôn) và khi tắt máy (30 vôn).
Bộ biến tần hoạt động càng lâu thì sẽ càng tạo ra nhiều điện và quý khách sẽ tiết kiệm được nhiều hơn.
Bộ biến tần 3 pha 5kW của Delta có thể duy trì toàn bộ năng lượng đầu ra khi nhiệt độ xung quanh lên tới 52 độ C.
Bộ biến tần của Delta với các lựa chọn sau:
-1 pha 2.5kW, 3kW, 4kW và Hybrid 5kW
- 3 pha 5kW, 10kW và 30kW
- Pin 6kWh
Hầu hết bộ biến tần của Delta được sử dụng trong thương mại và cài đặt với các thông số kỹ thuật và chất lượng thiết kế đối với cả bộ biến tần 1 và 3 pha
Delta DelCEN 1000 1Mw central inverterShane Arnold
Design, Engineered and Manufactured by Delta India the DelCEN 1000 is a flexible and easily suitable inverter for both ground and roof mountable solar. Providing a large saving $/w the DelCEN1000 is something to consider
The 100kw PCS by Delta Electronics Australia is a grid forming bi-directional inverter. The PCS is capable of delivering energy from Lithium ion batteries upto a 6C rate.
You can also parallel upto 4 of these units to deliver impressive peak demand shaving.
The renewable microgrid sector will gain a large advantage with the adoption of PCS 100
Delta Electronics Australia Portfolio of SolutionsShane Arnold
Delta Electronics Australia is part of the Delta Group of Companies. This includes Eltek, Vivotek and many companies we OEM for. Spanning the globe and employing over 9000 R&D engineers Delta is the most innovative electronics company in the world.
You may not realise it but you may already be a Delta owner due to our innovations in Telco and appliance chargers.
Delta Electronics Group Presentation 2020Shane Arnold
The largest switchable power supply manufacturer in the world Delta Electronics Australia is your proven solar inverter manufacturer to suit New Zealand and Australia's needs. A proven OEM and own brand manufacturer, Delta is a long standing partner to many multi-billion dollar companies.
Delta M30A, 30kw Three Phase Solar inverterShane Arnold
30kw of high temperature tolerant solar inverter. Used in projects upto 2.2MW in Australia and 5MW in Europe this inverter can be supplied with engineering assistance from Delta Electronics Australia
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
zkStudyClub - Reef: Fast Succinct Non-Interactive Zero-Knowledge Regex ProofsAlex Pruden
This paper presents Reef, a system for generating publicly verifiable succinct non-interactive zero-knowledge proofs that a committed document matches or does not match a regular expression. We describe applications such as proving the strength of passwords, the provenance of email despite redactions, the validity of oblivious DNS queries, and the existence of mutations in DNA. Reef supports the Perl Compatible Regular Expression syntax, including wildcards, alternation, ranges, capture groups, Kleene star, negations, and lookarounds. Reef introduces a new type of automata, Skipping Alternating Finite Automata (SAFA), that skips irrelevant parts of a document when producing proofs without undermining soundness, and instantiates SAFA with a lookup argument. Our experimental evaluation confirms that Reef can generate proofs for documents with 32M characters; the proofs are small and cheap to verify (under a second).
Paper: https://eprint.iacr.org/2023/1886
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Elevating Tactical DDD Patterns Through Object Calisthenics
Winaico 330w Datasheet WSP MX PERC
1. WINAICOWSP-MXPERC
19.4% EFFICIENCY
UP TO 340W
60 CELLS
99% relative efficiency at weak-light
Because a 3% increase in yield makes a difference.
2YEARS
2 years of free insurance included
Because you never know what tomorrow might
bring.
25 year linear performance
guarantee
15 year product warranty.
Water drainage design
Avoid water and dust accumulation to prevent
power degradation and hotspot problems.
Protection against the weather and
the elements
Because long term performance matters.
10 years of WINAICO quality modules
WINAICO has been providing the global market
with quality solar panels for over 10 years.
2. Specificationsincludedinthisdatasheetaresubjecttochangewithoutnotice.d315–TW.0519/agentur-bemberg.de
This frame design, produced entirely from aluminium, guarantees maximum stability and protection against material fatigue. The
rounded corners provide greater torsional stiffness and waterproofing in this critical area, where the material is at its weakest. In contrast
to other corner connections that use mitered cuts or threaded connections, WINAICO's corner pieces guarantee the best possible
transfer of tension across each section of the frame. The corner pieces are also designed with drainage channels, avoiding water and
dust accumulation, which over time can cause cell shading, power degradation and hotspot problems.
The electrical data applies under Nominal Module Operating Temperature (NMOT), irradiance of 800 W/m2
, spectrum AM 1.5, ambient temperature 20°C, wind
speed 1 m/s.
The electrical data applies under standard test conditions (STC): solar radiation 1,000 W/m2
with light spectrum AM 1.5, with cell temperature 25 °C. Measurement
tolerance of PMAX
at STC: ±3%. Accuracy of other electrical data: ±10%.
Electrical data (STC) WSP-330MX WSP-335MX WSP-340MX
Nominal performance PMAX
330 335 340 Wp
Voltage at maximum
performance
VMP
32.80 32.82 32.85 V
Current at maximum
performance
IMP
10.07 10.21 10.35 A
Open circuit voltage VOC
39.93 40.27 40.61 V
Short circuit current ISC
10.62 10.68 10.74 A
Module efficiency 18.83 19.11 19.40 %
Power tolerance -0/+5 W
Electrical data (NMOT) WSP-330MX WSP-335MX WSP-340MX
Nominal performance PMAX
240 244 248 Wp
Voltage at maximum
performance
VMP
30.14 30.16 30.18 V
Current at maximum
performance
IMP
7.98 8.09 8.20 A
Open circuit voltage VOC
37.62 37.94 38.26 V
Short circuit current ISC
8.40 8.45 8.49 A
WINAICOWSP-MXPERC
Mechanical data
Cell Monocrystalline 161.7 x 161.7 mm
Quantity and wiring of cells 60 in series
Dimensions 1,705 x 1028 x 35 mm
(67.13 x 40.47 x 1.38 in)
Weight 20.6 kg (45.8 lbs)
Glass thickness 3.2 mm (0.13 in)
Frame Black anodised aluminium
Junction box IP 67
Connector type MC4 (PV-KBT4/PV-KST4) IP68;
QC4.10 IP67
Module fire performance Type 4
Fire safety class C
Operating conditions
Operating temperature -40 °C to +85 °C / -40 °F to +185 °F
Maximum system voltage IEC/UL 1,000 V/1,000 V
Maximum series fuse 20 A
Maximum design load (+) / (-) 3,600 Pa / 2,400 Pa
Maximum test load (+) / (-) 5,400 Pa / 3,600 Pa
Nominal Module Operating Temperature NMOT 43.85 ± 3°C
Temperature coefficient of PMAX
-0.38%/°C
Temperature coefficient of VOC
-0.29%/°C
Temperature coefficient of ISC
0.04%/°C
Certifications
IEC 61215-1:2016, IEC 61215-2:2016, IEC 61730-1:2016, IEC 61730-2:2016
102043
110
Unit: mm
Label
100x120
1705
35
1705
1028
200200252.5
249.5
304.5
5.0 9
200
18
8
964
529
514
14
1200
Cable length
1200 mm
WINAICO Australia Pty Ltd
Tel + 61 2 8091 2771
australia@winaico.com
www.winaico.com
3/393 George Street, Sydney NSW 2000, Australia
WINAICO is a trademark of
Win Win Precision Technology Co., Ltd.