The document discusses the multi-step process for electroplating chromium onto molds including pre-treating the surface, preparing conforming anodes, using a large rectifier and plating tank to achieve a uniform deposit without peeling at a hardness of 65 Rockwell, and quality testing to guarantee the plating can withstand 40,000 strokes without peeling.

1. INFORM PRIOR FOR DELIVERIES WITHIN 48 HOURS

2. ALKALINE BASED REACTION FOR REMOVAL OF PRE-PLATED CHROMIUM

3. PRE-PLATING SURFACE TREATMENT BUFFING – GRINDING - POLISHING

4. PREPARATION OF CONFORMING ANODES TO ALLOW UNIFORM DEPOSIT ( ± 5 MICRON VARIATION) – DIFFERENT INPUT FOR LOW CURRENT & HIGH CURRENT AREAS

5. 10000A RECTIFIER – 37000 LTR PLATING TANK UNIFORM DEPOSIT – NO PEEL OFF – 65 ROCKWELL HARDNESS

6. MIRROR FINISH ON THE FINISHED MOULD

7. QUALITY TESTS CONDUCTED THICKNESS TEST – HARDNESS TEST – BONDING TEST

8. OUR GUARANTEE – 40,000 STROKES WITHOUT PEEL OFF ON – SITE SUPPORT AFTER SERVICE