The APG UNILINE system is a high precision medium and long throw line array system consisting of UL210 line array speakers and UL115B bass speakers. The UL210 is a 2-way or 3-way active speaker, while the UL115B is a 1-way bass speaker. The system offers high acoustic and sound quality performance, great modularity with different configuration modes, and constant horizontal directivity of 85 degrees for the mid/high frequencies. It has a sophisticated rigging system and is designed to be handy with integrated handles and transportation dollies.

1. 1

2. 2
APG line array : UNILINE
High precision medium and long throw line array system
 UL210 : line array speaker, 3 acoustic ways, 2 way active
 UL115B : specific bass speaker, 1 way
Benefit
 High level of acoustic and sounding performances
 Great modularity : 4 modes of using
 Usable in lifting or stacking configuration
 Real constant horizontal directivity of 85° in mid/hi
 Real isophase source in vertical plane
 Sophisticated rigging system with 2 truss :
­ 3 points mode for UL210
­ 4 points mode for UL115B (cardioïd configuration)
­ Fully integrated (pieces and lock pins)
 Handly : 10 integrated handles for UL210
 2 specific transportation dollies : UL210WB and UL115B
 Minimum {size / SPL} ratio : horn loaded loudspeakers
with forced air cooling technology
APG UNILINE system

3. 3
UL210 line array speaker
Lo/Mid Mid/Hi
Transducers 2 x 10" Nd
1 x 6,5" Nd
1 x HF1" Nd
Acoustic load Compression IsotopTM
+ horn
Coil diameter 75mm 75mm
Impedance 16 Ohms 16 Ohms
Freq. band, 2 way 70 ­ 450 Hz
450 Hz – 19
KHz
Freq. band, 3 way* 100 – 450 Hz 450 Hz – 19kHz
SPL @ 1W /1m 99 dB 108 dB
Power (AES) 800 W 300 W
SLP max @ 1m 129 dB
SPL peak @ 1m 135 dB
* In combination with bass speakers or subwoofers

4. 4
UL210: internal description
Internal Cabling:
- 1+/1­ to lo/mid section
- 2+/2­ to mid/hi section
Loudspeakers:
­ 2 x 10" loaded in compression
­ 1 x Isotop10TM
driver loaded with the big frontal horn
Exceptional control of directivity:
­ Frontal horn of big size in mid and hi frequency
band
­ Horizontal d'Appolito arrangement in lo/mid band
UL210 top view
APG IsotopTM
driver
Horizontal directivity Vertical directivity

5. 5
horn
Isotop™ wave guide
HF1" + 6,5” Isotop
IsotopTM
load applied on assembly of 6,5” + HF1”

6. 6
 To modify emitting conical source into a linear ribbon type source.
 Compression & phase of the 2 transducers
 Replace conventional compression drivers
Isotop™ technology
Schema of Polar Diagram in 3D

7. 7
 6,5” = real transducer for medium reproduction
HF 1" = real transducer for high reproduction
 Power 300 W (> conventional compression driver)
 Bandwidth 450 Hz – 19KHz (in the UL210)
 Minimum distortion & aggressiveness
 Linearity in power (same sound reproduction whatever the power is)
Isotop™ advantages

8. 8
UL115B bass speaker
UL115B
Transducers 1 x 15" Nd
Impedance 8 Ohms
Coil diameter 4"
Freq band 45 – 100 Hz
SPL @ 1W /1m 102 dB
Power (AES) 1150 W
SLP max @ 1m 132 dB
SPL max @ 1m 138 dB

9. 9
UL115B: internal description
Rear load
Front load
K-Horn
Internal cabling:
• 1+/1- for rear connectors
• 2+/2- for front connectors (cardioïd configuration)
Loudspeaker:
• 1 x 15" Neodynium
• Band pass acoustic load + K-Horn
Exceptional acoustic performances
• +2 dB SPL* thanks to band pass load
• +2 dB SPL* thanks to K-Horn
• +2 dB SPL* thanks to forced air cooling ventilation
* In comparison with a standard bass reflex and direct
radiation load
UL115B top view
Acoustic load

10. 10
Rigging and Transportation
Rigging system:
 bumper ULTRUSS (for lifting, stacking, and
coupling of UL210 and UL115B
 3 point rigging mode for UL210
 4 point rigging mode for UL115B
Transportation :
 2 specific dollies
 UL210WB allows up to 6 x UL210
 UL115BWB allows up to 4 x UL115B
 Dollies compatible with top part of flight
case
UL210WB UL115WB

11. 11
Bass reinforcement
Low and very low frequency extension can be operated:
 with UL115B bass speaker
 with APG "TB" series subwoofers
 with a combination of UL115B and subwoofers
Frequency range:
 UL210 in wide band : 55Hz – 19kHz
 UL210 + UL115B : 45Hz – 19kHz
 UL210 + UL115B + TB115S: 45Hz – 19kHz
 UL210 + UL115B + TB118S : 35Hz – 19kHz
 UL210 + UL115B + TB215S : 45Hz – 19kHz
 UL210 + UL115B + TB218S : 35Hz – 19kHz
TB218S
TB115S
TB118S
TB215S
UL115B

12. 12
Full range mode
UL210 used in full range
Wide band mode
 Only UL210 speaker used
 2 way active
 Vocal and recorded music application
 Low frequency cut off depending on the lenght of the
cluster (65Hz to 75Hz)

13. 13
Extended mode (1)
Extended mode (with UL115B)
Extended mode (with UL115B in cardioïd configuration)
"Extended mode": with UL115B
 UL210 in combination with UL115B
 Musical applications
 Crossover point : from 80Hz to 120Hz
 Low frequency cut off : 45Hz

14. 14
Extended mode (2)
Extended mode with TB218S
"Extended mode": with subwoofers
 UL210 in combination with "TB" subs
 Vocal and musical applications
 Crossover point : from 80Hz to 100Hz
 Low frequency cut off : 35Hz to 45Hz (depending on
subwoofer model)

15. 15
Wide band mode
"Wide band mode": with UL115B + SUBS
 UL210 in combination with UL115B + "TB" subs
 Live and high power musical applications
 SUB/UL155B overlap: from 55Hz to 63Hz
 TB118S or TB218S recommanded
 Low frequency cut off : 30Hz to 35Hz depending on sub
quantity

16. 16
Stacking configuration
Stacking configuration
 ULTRUSS delivered with the rear specific piece
 Angle tuning : from -15° to 8°
 ULTRUSSSP option include 4 x "foots"
 ULTRUSSTP option include 2 x transition pieces for
mechanical coupling of UL115B and UL210
+8°
-15°
foot
Transition piece

17. 17
Signal processing
PWAPG
Interface
Digital controller DMS26

18. 18
DMS26: network and distant control
Network synoptic
Up to 199 DMS26 chained
Plug and Play BvNet network card
BvNet / USB / RS232 interface
RS232 or
WIFI

19. 19
Amplification rack
APG connecting patch: PCM or PCS
1. 4 inputs XLR 3
2. 4 links XLR 3 (PCM) or 4 inputs XLR 3 (PCS)
3. 2 outputs SpeakonTM
8
4. 4 sorties SpeakonTM
4
5. Network connectors (In + Link)
6. Place for HartingTM
24 points
7. Place for HartingTM
link(Ø 26mm)
UL210 amplification
 Lo/mid section:
- 800 W in 16 Ohm
- 3200 W in 4 Ohm
 Mid/Hi section:
- 300 W in 16 Ohm
- 1200 W in 4 Ohm
UL115B amplification
- 1150 W in 8 Ohm
- 2600 W in 4 OhmAPG recommends Powersoft or Lab Gruppen

20. 20
Example 1
Full range mode
6 UL210 per side
 12 x UL210
 2 x PCM
 2 x DMS26
 4 x Amplifiers (2 x 2600W in 4Ω)

21. 21
Example 2
Extended mode 1
6 UL210 + 3 UL115B per side
8 x UL210
6 x UL115B
2 x PCM
2 x DMS26
4 x Amplifiers (2 x 2600W in 4Ω)

22. 22
Example 3
Wide band mode
6 UL210 + 3 UL115B + 2 SUBS per side
 12 x UL210
 6 x UL115B
 4 x TB218S
 2 x PCM
 2 x DMS26
 6 x Ampli (2 x 2600W in 4Ω)

23. 23
Example 4
Wide band mode
12 UL210 + 6 UL115B + 4 SUBS per side
 24 x UL210
 12 x UL115B
 8 x TB218S
 2 x PCM
 4 x DMS26
 10 x Ampli (2 x 2600W in 4Ω)
 2 x Ampli (2 x 4000W in 2Ω)

24. 24
Uniline Aiming Tool
UNILINE AIMING TOOL
 Specific calculation tool
 UL210 and UL115B
 Acoustic simulation
 Mechanical simulation
Simulation of the site: up to 4 listening areas
Calculation of the system: aiming of UL210 and
UL115B
Acoustic simulation for octave band

25. 25
Uniline Aiming Tool
Mechanical security
 Mechanical alerts
 Report of study

26. 26
Maximum configurations
Using 2 x ULTRUSS Using 1 x ULTRUSS
16 x UL210 20 x UL115B
8 x UL115B
Using 1 x ULTRUSS Using 1 x ULRAIL
24 x UL210 6 x UL115B

27. 27
Setting up
1 2 3 4
5
7
7
Place 1rst stack
under lifting points
Fix the hanging
hook of motor
Tune and check
vertical coupling
angles
Do and check the
cabling of all
speakers
Check the line and
the phase of each
section for each
speacker
Repeat operation
until to have all
speakers coupled