1. 11
Tool package for hydraulic blocks
One shot solution
UM GROOVING LAND TOOL™ is a profile cutter which is mainly
used for machining all grooving lands in a spoolbore hole in
one shot. In some cases, half of the grooving lands are ma-
chined from one side and the rest from the other side of the
spoolbore. Furthermore, a UM GROOVING LAND TOOL™ can in
some cases be used in connection with Cavity holes.
The tool is a specially designed tool, which is developed for
machining grooving lands mainly in cast iron materials, but it
can also be used for aluminium and steel. The tool is part of
our existing tool package for the machining of hydraulic valve
blocks reducing the process time by 30-50 %.
The UM GROOVING LANDTOOL™ is a tool for
machining grooving lands in hydraulic valve
bodies within the Fluid Power industry.
One shot
solution
Cuts processing times
The UM GROOVING LAND TOOL™ can often replace a cutting tool
with inserts with one to three cutting edges, only machining one
grooving land at a time. There are usually 7-15 grooving lands
in each spoolbore, so UM GROOVING LAND TOOL™ can reduce
machining time considerably.
Tight tolerances
Tolerances between the grooving lands are always assured, as
these dimensions/tolerances are built into the cutting tool.
More reliable process
UM GROOVING LAND TOOL™ is normally two fluted, giving a lower
cutting force than a single fluted. The cutting edges are also made
in a 15° spiral, reducing the risk of vibration and spreading the
cutting forces.
Grooving lands
UM GROOVING LANDTOOL™