The document provides cleaning and coating recommendations for steel surfaces with varying levels of rust, labeled R-1 through R-5. It specifies cleaning methods such as hand tool cleaning, power tool cleaning, and blast cleaning. It also recommends spot priming and full finish coating with two products: Induron's E-Bond 100% solids penetrating sealer and Induraguard 9200. Application rates of 1-2 mils for the primer and 8-10 mils for the finish coat are provided.

1. firm

2. R-l (00/o to 0.lolo Rust)
o SSPC-SP-2 Hand Tool Clean
c Spot Prime with Induron's E-Bond l00o/o Solids Penetrating Sealer @ 1.0 mils to 2.0 mils DFT
o Full Finish Coat of Induron's Induraguard 9200 @ B mils to l0 mils
R-2 (0.10/o to lolo Rust)
o SSPC-SP-2 Hand Tool Clean Rusted Areas
o Spot Primewith lnduron's E-Bond l00o/o Solids Penetrating Sealer @
'l.0 milsto 2.0 mils DFT
c Full Finish Coat of lnduron's Induraguard 9200 @ B mils to l0 mils
R-I (lolo to l0o/o Rust)
o SSPC-SP-5 Power Tool Clean Rusted Areas
c Spot Prime with Induron's E-Bond 1000/o Solids Penetrating Sealer @ 1.0 mils to 2.0 mils DFf
o Full Finish Coat of lnduron's lnduraguard 9200 @ B mils to l0 mils
R-4 (lOolo to 500/o Rust)
o SSPC-SP-l I Power Tool Clean to Bare Metal
o Full Prime with Induron's E-Bond 1000/o Solids Penetrating Sealer @ 1.0 mils to 2.0 mils DFf
o Full Finish Coat of lnduron's lnduraguard 9200 @ B mils to l0 mils
R-5 (Over 500/o Rust)
o SSPC-SP-l I Power Tool Clean to Bare Metal or SSPC-SP6 Commercial Blast Clean Clean
o Full Prime with lnduron's E-Bond l00o/o Solids Penetrating Sealer @ 1.0 mils to 2.0 mils DFI
o Full Finish Coat of Induron's lnduraguard 9200 @ B mils to l0 mils
Look Beneath The Sut{ace.
PROTECTIVE COATINGS
lnduron Coatings Inc.
r -l I il J555 KlcnarC ArnnSTOn Jr. blvo l
Birmi ngham, Alabama 3523H303
Phone: 205-324-9584' 800-324'9584 Fax: 205-320-5220
induron.com . Email: info@induron.com