Optimization of biodiesel from argemone oil with different reaction parameter...eSAT Journals
Abstract This experiment work is to investigate the performance parameters of single cylinder, four stroke engine connected to eddy current dynamometer fuelled with argemone biodiesel and blend with diesel fuel under different load condition (0%, 20%, 40%, 60%, 80%, 100%) and constant engine running speed. The performance parameters consist of brake power (BP), brake thermal efficiency (BTHE), and brake specific fuel consumption (BSFC). The argemone mexicana oil was used for production of biodiesel. The transesterification process was used for production of argemone oil methyl ester by using methanol in the presence of sodium metal as a catalyst. The process undergoing various reaction conditions with molar ratio (1:6, 1:3, 1:9 oil to methanol), reaction time (60 min, 90 min, 120 min), reaction temperature (55°C, 65°C, 75°C, 85°C) and catalyst (1%, 1.5%, 2%, 2.5% w/w of oil) effects the fuel properties of argemone biodiesel. The most favorable conditions for transesterification of argemone oil with methanol in the presence of sodium metal as a catalyst was found with molar ratio 1:6 (oil to methanol), reaction time 120 min, reaction temperature 75°C and catalyst 1.5% (w/w of oil). The fuel properties were calculated and compared with Diesel. The result shows that argemone biodiesel blend (AB10 and AB20) have improved fuel property and brake thermal efficiency, brake power and specific fuel consumption value closer to diesel value. Keywords: Argemone mexicana oil, Transesterification, Sodium metal Catalyst, Methyl ester, Biodiesel Properties, Engine Performance.
This is evidence of reports created by my eight online workshop participants. In addition, I have included the testing data from the participants with a brief evaluation of their results.
Optimization of biodiesel from argemone oil with different reaction parameter...eSAT Journals
Abstract This experiment work is to investigate the performance parameters of single cylinder, four stroke engine connected to eddy current dynamometer fuelled with argemone biodiesel and blend with diesel fuel under different load condition (0%, 20%, 40%, 60%, 80%, 100%) and constant engine running speed. The performance parameters consist of brake power (BP), brake thermal efficiency (BTHE), and brake specific fuel consumption (BSFC). The argemone mexicana oil was used for production of biodiesel. The transesterification process was used for production of argemone oil methyl ester by using methanol in the presence of sodium metal as a catalyst. The process undergoing various reaction conditions with molar ratio (1:6, 1:3, 1:9 oil to methanol), reaction time (60 min, 90 min, 120 min), reaction temperature (55°C, 65°C, 75°C, 85°C) and catalyst (1%, 1.5%, 2%, 2.5% w/w of oil) effects the fuel properties of argemone biodiesel. The most favorable conditions for transesterification of argemone oil with methanol in the presence of sodium metal as a catalyst was found with molar ratio 1:6 (oil to methanol), reaction time 120 min, reaction temperature 75°C and catalyst 1.5% (w/w of oil). The fuel properties were calculated and compared with Diesel. The result shows that argemone biodiesel blend (AB10 and AB20) have improved fuel property and brake thermal efficiency, brake power and specific fuel consumption value closer to diesel value. Keywords: Argemone mexicana oil, Transesterification, Sodium metal Catalyst, Methyl ester, Biodiesel Properties, Engine Performance.
This is evidence of reports created by my eight online workshop participants. In addition, I have included the testing data from the participants with a brief evaluation of their results.
8. Indikator
1.1 Siswa dapat membuat slide baru
1.2 Memilih slide mengganti layout
1.3 Menggunakan Design Template
1.4 Bekerja dengan teks & objek.
9. Peta Konsep
Membuat slide baru
Memilih slide mengganti layout
Menggunakan design template
Bekerja dengan teks dan objek
Menambah
teks
Mangatur
format teks
Format
teks
Menyisipkan
clip art/ picture
10. Materi
1. Cara membuat slide baru
a. Buka ribbon HOME -> “SLIDE” -> “NEW
SLIDE”
b. Maka muncul
16. 4. Bekerja dengan teks dan objek
1) Menambahkan teks
Terdapat 4 jenis text dalam Microsoft Power Point yang
dapat kita buat, diantaranya:
1. Teks Placeholder
Placeholder adalah kotak yang dibatasi titik –
titik yang menjadi sebagian besar layout slide.
Kotak ini menjadi tempat judul dan teks atau objek
seperti grafik, tabel, dan gambar.
17. Text Box
2. suatu tempat untuk
teks yang dapat
bergerak dan berubah
ukuran.
Text Box dapat
digunakan untuk
menempatkan teks
dimanapun
Teks Autoshape
3. Autoshape adalah
satu grup bentuk –
bentuk siap pakai
yang termasuk
bentuk dasar, seperti
segiempat, lingkaran,
ditambah dengan
variasi garis dan
hubungan.
18. 4. Wordart adalah objek
yang dibuat dengan efek
siap pakai dan dapat
diformat. Anda dapat
menggunakan wordart
untuk teks yang
menarik. Wordart dapat
diperbesar,
diperkecil, dan dirotasi.
19. 2) format teks
Untuk memformat font, kita dapat menggunakan
tool group font yang terdapat padaRibbon Tab
Home.
Tool group akan aktif
jika anda mengaktifkan
teks yang terdapat
pada placeholder
atautext box.
Cara mengaktifkan teks tersebut ialah:
1. Menyeleksi teks (mem-blok teks yang akan di
format
20. 2. Klik placeholder
Setelah anda memilih salah satu dari pilihan
diatas, maka anda dapat menggunakan tools group
font yang ada pada Ribbon Tab Home
21. 4) Menyisipkan
gambar clipart
a. Klik ribbon
Insert -> pilih
Clipart
Menyisipkan
gambar picture
a. Klik ribbon
insert -> Klik
picture
b. Maka muncul ->
klik “GO”
b. Kemudian
masukan
gambar yang
diinginkan.
22. Uji Kompetensi
1. Dokumen presentasi dalam Ms.PowerPoint 2007
berekstensi…
a. doc
c. xls
b. ppt.
d. gif
2.Perintah Open, Save, dan Save As
terdapat dalam menu…
a.File
c.End
b.View
d.Delete
3. Menghapus slide dapat menggunakan tombol atau
perintah…
a.Cut
c.End
b.Insert
d.Delete
23. 4. Kotak yang dibatasi titik-titik sebagai tempat judul teks dan
dinamakan…..
a.Layout Slide
c. Rectingle
b. Placeholder
d. Text Box
5.Untuk menyisipkan gambar dari file ke dalam slide dapat
dilakukan dengan menggunakan icon…
a.ClipArt
c. Photo album
b.Picture
d.Shapes
6.Rancangan tampilan slide yang berupa pilihan kolom,teks
dan gambar dapat dipilih dalam…..
a.Slide Design
c.Slide Layout
b.Slide Show
d.Slide transition
24. 7.Icon
berfungsi untuk….
A. Menambahkan text box
B. Membuka lembar kerja baru
C. Menambahkan slide
D. Membuka lembar kerja
8. Icon
a.Font
b.Font Size
disebut…..
c.Font Color
d.Grow font
9.Gambar icon clipart yang tepat…
a.
c.
b.
d.
25. 10. Untuk melakukan perubahan bentuk thema
slide, agar tampilan thema yang diubah hanya slide yang
sedang aktif saja, maka yang dipilih adalah….
a. Apply to all slides
b. Apply to selected slide
c. Set as default themes
d. Add galery to quick acces toolbar
Essay
1. Bagaimana cara membuat dokumen baru?
2. Bagaimana cara memilih dan mengganti?
3. Bagaimana cara menggunakan themes slide?
4. Sebutkan nama dan fungsi icon
5. Sebutkan icon – icon yang terdapat dalam tab
Illustration!
26. Kunci Jawaban
1.
2.
3.
4.
5.
B
A
D
B
B
6. C
7. A
8. A
9. D
10. B
Essay :
1.
2.
3.
4.
5.
Buka ribbon Home -> “slide” -> “new slide” -> pilih salah
satu.
Klik tab Home ->“slide” -> layout -> Pilih salah satu layout.
Klik ribbon “design” -> pilih “themes” -> pilih salah satu.
Picture. Fungsinya memasukan file gambar sesuai
keinginan.
Picture, Clip Art, Photo Album, Shapes, SmartArt, Chart.