This document discusses tools and methods for effective outsourcing at Itis shopping centre in Finland. It provides background on facility management, quality systems, and the outsourcing process. The case study examines how Itis implements outsourcing for cleaning, maintenance, security and other services. It finds that Itis uses several tools for outsourcing including needs assessment, risk assessment, developing service specifications, tendering, negotiation, service level agreements, performance monitoring and quality systems. The research suggests these tools help Itis obtain quality outsourced services but that benchmarking these tools with other organizations could provide new ideas.
completed a Thesis report of employee performance appraisal rewards and recognition. where I found how the company do performance, what are the techniques, methods, effect of performance appraisal, how rewards and reorganization improve performance of employees into the company. because if employee can get rewards and recognition employees can perform better.
This document provides an organizational assessment of Preferred Machine Works, Inc. (PMW) conducted by US Consulting. PMW is a manufacturing company specializing in custom machined parts. US Consulting used interviews, surveys, focus groups, and content analysis to evaluate PMW's communication effectiveness. They identified four key findings: 1) PMW relies heavily on on-the-job training without standards, 2) documentation is done manually, 3) employees do not receive formal feedback, and 4) employees maintain cohesive relationships through face-to-face communication. Based on these findings, US Consulting recommends: 1) implementing a standardized training program, 2) creating a digital documentation system, 3) conducting performance evaluations, and 4)
Measuring Channel Partners Experience in Bancassurance An Empirical Studyijtsrd
Purpose– This study attempts to investigate bancassurance channel experience with respect Insurance Company. Design Methodology Approach– The study is based on primary data collected using a structured questionnaire from bancassurance channel in the city of Kolhapur in the state of Maharashtra, India. Cronbach's alpha was used to test the reliability of the questionnaire. Statistical tools, such as mean, correlation and multiple linear regression analysis were used to attain the objective of the study. Findings and implications– The study found that customers have favorable experiences when buying life insurance through the bancassurance channel. There are five core factors that affect customer experience in bancassurance channel partners satisfaction on service, opinion about staff, recommendation for business, satisfaction on documentation process, customers overall satisfaction. Insurance company should devise a strategy to sustain favorable experiences of their bancassurance channel, as this enables Insurance Company to retain their existing bancassurance channel while also attracting new ones. Limitations– The study is restricted to bancassurance channel partner of XYZ insurance company in Kolhapur, India. Therefore, longitudinal and cross sectional research is needed to generalize the findings. Originality– The study is first of its kind and hence original in nature. Prashant Ganesh Kale ""Measuring Channel Partners Experience in Bancassurance: An Empirical Study"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23862.pdf
Paper URL: https://www.ijtsrd.com/management/general-management/23862/measuring-channel-partners-experience-in-bancassurance-an-empirical-study/prashant-ganesh-kale
Sente Group provides test resource management software that helps customers streamline data from disparate systems and databases related to test assets, calibration, and project management. This consolidated access to information improves strategic sourcing management and optimizes utilization of test equipment, personnel, and facilities. Sente's comprehensive solution increases collaboration, drives cost efficiencies, and sets a new standard in customer experience, service, and acquisition. The holistic approach positions Sente for continued growth in optimizing complex test operations.
This dissertation examines the factors that affect knowledge transfer about resources among assignment managers in a medium-sized management consultancy. The author conducted a literature review on knowledge transfer and competitive advantage. He then interviewed eight senior consultants to evaluate the applicability of the literature. The interviews found support for social networks being important for knowledge sharing and that electronic systems cannot fully convey contextual knowledge. The author was able to offer recommendations to improve knowledge sharing and identify areas for further study.
This document summarizes a research paper that explored total quality management (TQM) and supply chain management (SCM) enablers. The paper identified the most commonly cited TQM enablers from literature as top management commitment, customer satisfaction, empowerment, teamwork, training, and culture change. The most widely cited SCM enablers were customer relationship, information sharing, top management leadership, strategic supplier relationship, material flow management, and authentic partnership. By comparing the TQM and SCM enablers, the paper found that top management commitment and customer satisfaction were the two most important enablers cited for both TQM and SCM strategies.
The Impact of Supply Chain Collaboration on Operational Performance in the Co...TABE Shadrack A.
This document is a thesis submitted by Tabe Shadrack Ayuk to Kwame Nkrumah University of Science and Technology in partial fulfillment of the requirements for a Master of Business Administration degree in Logistics and Supply Chain Management. The thesis investigates the impact of supply chain collaboration on operational performance in the cocoa industry of Ghana Cocoa Board's Ashanti Region. It explores how joint planning, information sharing, trust, and visibility across the supply chain affect effectiveness, efficiency, profitability, and collaborative advantage. The thesis provides context on the key players in Ghana's cocoa industry and conceptualizes their relationships.
This document outlines the objectives of a project to improve public sector performance in Honduras by strengthening financial management systems, upgrading the e-procurement platform, enhancing controls over personnel expenditures, and building capacity for central administration. The project has five components including upgrading the financial management system, strengthening public procurement, and improving human resource management in the public sector. The overall goals are to establish a more efficient, effective and transparent system for public finances and procurement in Honduras.
completed a Thesis report of employee performance appraisal rewards and recognition. where I found how the company do performance, what are the techniques, methods, effect of performance appraisal, how rewards and reorganization improve performance of employees into the company. because if employee can get rewards and recognition employees can perform better.
This document provides an organizational assessment of Preferred Machine Works, Inc. (PMW) conducted by US Consulting. PMW is a manufacturing company specializing in custom machined parts. US Consulting used interviews, surveys, focus groups, and content analysis to evaluate PMW's communication effectiveness. They identified four key findings: 1) PMW relies heavily on on-the-job training without standards, 2) documentation is done manually, 3) employees do not receive formal feedback, and 4) employees maintain cohesive relationships through face-to-face communication. Based on these findings, US Consulting recommends: 1) implementing a standardized training program, 2) creating a digital documentation system, 3) conducting performance evaluations, and 4)
Measuring Channel Partners Experience in Bancassurance An Empirical Studyijtsrd
Purpose– This study attempts to investigate bancassurance channel experience with respect Insurance Company. Design Methodology Approach– The study is based on primary data collected using a structured questionnaire from bancassurance channel in the city of Kolhapur in the state of Maharashtra, India. Cronbach's alpha was used to test the reliability of the questionnaire. Statistical tools, such as mean, correlation and multiple linear regression analysis were used to attain the objective of the study. Findings and implications– The study found that customers have favorable experiences when buying life insurance through the bancassurance channel. There are five core factors that affect customer experience in bancassurance channel partners satisfaction on service, opinion about staff, recommendation for business, satisfaction on documentation process, customers overall satisfaction. Insurance company should devise a strategy to sustain favorable experiences of their bancassurance channel, as this enables Insurance Company to retain their existing bancassurance channel while also attracting new ones. Limitations– The study is restricted to bancassurance channel partner of XYZ insurance company in Kolhapur, India. Therefore, longitudinal and cross sectional research is needed to generalize the findings. Originality– The study is first of its kind and hence original in nature. Prashant Ganesh Kale ""Measuring Channel Partners Experience in Bancassurance: An Empirical Study"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23862.pdf
Paper URL: https://www.ijtsrd.com/management/general-management/23862/measuring-channel-partners-experience-in-bancassurance-an-empirical-study/prashant-ganesh-kale
Sente Group provides test resource management software that helps customers streamline data from disparate systems and databases related to test assets, calibration, and project management. This consolidated access to information improves strategic sourcing management and optimizes utilization of test equipment, personnel, and facilities. Sente's comprehensive solution increases collaboration, drives cost efficiencies, and sets a new standard in customer experience, service, and acquisition. The holistic approach positions Sente for continued growth in optimizing complex test operations.
This dissertation examines the factors that affect knowledge transfer about resources among assignment managers in a medium-sized management consultancy. The author conducted a literature review on knowledge transfer and competitive advantage. He then interviewed eight senior consultants to evaluate the applicability of the literature. The interviews found support for social networks being important for knowledge sharing and that electronic systems cannot fully convey contextual knowledge. The author was able to offer recommendations to improve knowledge sharing and identify areas for further study.
This document summarizes a research paper that explored total quality management (TQM) and supply chain management (SCM) enablers. The paper identified the most commonly cited TQM enablers from literature as top management commitment, customer satisfaction, empowerment, teamwork, training, and culture change. The most widely cited SCM enablers were customer relationship, information sharing, top management leadership, strategic supplier relationship, material flow management, and authentic partnership. By comparing the TQM and SCM enablers, the paper found that top management commitment and customer satisfaction were the two most important enablers cited for both TQM and SCM strategies.
The Impact of Supply Chain Collaboration on Operational Performance in the Co...TABE Shadrack A.
This document is a thesis submitted by Tabe Shadrack Ayuk to Kwame Nkrumah University of Science and Technology in partial fulfillment of the requirements for a Master of Business Administration degree in Logistics and Supply Chain Management. The thesis investigates the impact of supply chain collaboration on operational performance in the cocoa industry of Ghana Cocoa Board's Ashanti Region. It explores how joint planning, information sharing, trust, and visibility across the supply chain affect effectiveness, efficiency, profitability, and collaborative advantage. The thesis provides context on the key players in Ghana's cocoa industry and conceptualizes their relationships.
This document outlines the objectives of a project to improve public sector performance in Honduras by strengthening financial management systems, upgrading the e-procurement platform, enhancing controls over personnel expenditures, and building capacity for central administration. The project has five components including upgrading the financial management system, strengthening public procurement, and improving human resource management in the public sector. The overall goals are to establish a more efficient, effective and transparent system for public finances and procurement in Honduras.
Pharmaceutical store management systemTushar Dalvi
Developed online in-house Application for Pharmacy Management. Used Salesforce as CRM software to develop login Form, customer inquiry Form, and other various forms, also used HTML & CSS for Webpage Designing.
This document provides an abstract for a dissertation that evaluates criteria used in supplier selection processes. The dissertation was submitted by Alan Kurien Punnoose to the University of Bath in partial fulfillment of an MSc in Management with Operations Management. It contains 14,545 words. The dissertation involves a qualitative case study of the supplier selection process at Aston Martin, a luxury car manufacturer. It uses interviews to collect data and evaluates Aston Martin's process using the Analytic Hierarchy Process (AHP) methodology for decision making. The dissertation aims to critically evaluate criteria for supplier selection and compare Aston Martin's process to the AHP methodology.
This document presents a research proposal to study the impact of employee turnover on the performance of Hoctief Construction Company Ltd. The research will use a mixed methods approach, collecting both quantitative and qualitative data. The literature review discusses conflicting views on whether turnover positively or negatively impacts performance. The research aims to determine the causes of turnover at Hoctief, measure its effects on performance, and identify ways to minimize turnover to increase performance. The methodology section evaluates the mixed methods approach and discusses its advantages for answering the research questions over a single methodology. Limitations are also acknowledged.
Effective supply chain management as a strategic advantage conducted at tss l...Projects Kart
1. The document discusses supply chain management at TSS, a cooperative society in Sirsi, India that has been operating since 1913.
2. TSS is a major player in the arecanut industry, procuring arecanut from farmers and distributing it to major domestic markets. Karnataka accounts for 46% of India's arecanut production, with Uttara Kannada contributing 11%.
3. The study aims to analyze TSS's supply chain management and understand customer expectations to help the management address any issues and better serve customers. Primary and secondary data will be collected through questionnaires and existing reports.
This document discusses supplier appraisal at Muteesa 1 Royal University. It defines supplier appraisal as the assessment of a potential supplier's ability to control quality, delivery, quantity, price and other contractual factors. Supplier appraisal should be conducted in two phases - pre-contract appraisal to assess past performance, and post-contract appraisal to evaluate performance in meeting contractual obligations. While time-consuming, supplier appraisal is important for high-value, high-risk purchases. The document examines how supplier appraisal is conducted at Muteesa 1 Royal University, focusing on factors like financial status, capacity, and communication.
This technical report explores intrapreneurship in an information systems service organization from the perspective of employees. It provides an overview of entrepreneurship theory and considers how this relates to intrapreneurship and information entrepreneurship. The report describes a survey of employees at an information systems service company to understand their perceptions of the organization's support for identifying and exploiting new opportunities. The findings show that while the company supports some entrepreneurial behaviors, employees overall feel the company does not support such behaviors. Recommendations are provided to improve the company's entrepreneurial profile.
Writekraft Research and Publications LLP was initially formed, informally, in 2006 by a group of scholars to help fellow students. Gradually, with several dissertations, thesis and assignments receiving acclaim and a good grade, Writekraft was officially founded in 2011 . Since its establishment, Writekraft Research & Publications LLP is Guiding and Mentoring PhD Scholars.
Our Mission
“To provide breakthrough research works to our clients through Perseverant efforts towards creativity and innovation”.
Vision
Writekraft endeavours to be the leading global research and publications company that will fulfil all research needs of our clients. We will achieve this vision through:
Analyzing every customer’s aims, objectives and purpose of research
Using advanced and latest tools and technique of research and analysis
Coordinating and including their own ideas and knowledge
Providing the desired inferences and results of the research
In the past decade, we have successfully assisted students from various universities in India and globally. We at Writekraft Research & Publications LLP head office in Kanpur, India are most trusted and professional Research, Writing, Guidance and Publication Service Provider for PhD. Our services meet all your PhD Admissions, Thesis Preparation and Research Paper Publication needs with highest regards for the quality you prefer.
LEAN LEVEL OF AN ORGANIZATION ASSESSED BASED ON FUZZY LOGIC csandit
To determine the lean level of an organization a methodology was developed. It was based on a
qualitative assessment approach, including quantitative basis, whose development was
supported using fuzzy logic. Recourse to the use of fuzzy logic is justified by its ability to cope
with uncertainty and imprecision on the input data, as well as, could be applied to the analysis
of qualitative variables of a system, turning them into quantitative values. A major advantage of
the developed approach is that it can be adjusted to any organization regardless of their nature,
size, strategy and market positioning. Furthermore, the proposed methodology allows the
systematically identification of constraint factors existing in an organization and, thus, provide
the necessary information to the manager to develop a holistic plan for continuous
improvement. To assess the robustness of the proposed approach, the methodology was applied
to a maintenance and manufacturing aeronautical organization.
The document discusses outsourcing as a change management tool in libraries and documentation centers. It defines outsourcing and examines how it can support the seven rules of organizational change, including strategic planning, marketing of services, and improving human resource management. The document outlines 10 reasons why outsourcing is considered a tool for change, such as improving cost control and profitability, accessing expertise, and freeing up internal resources to focus on innovation. In conclusion, it states that outsourcing can build relationships focused on shared goals beyond just cost reduction.
The document summarizes research assessing the service profit chain model in Kuwaiti banking. It presents the research objectives, questions, and hypotheses testing relationships between internal service quality, employee satisfaction and loyalty, customer satisfaction and loyalty, and financial performance. A conceptual framework is developed and data is collected from bank employees and customers. Structural equation modeling finds most relationships are significant and positive, supporting the service profit chain model. The research concludes the model can be used as a strategic decision-making tool by Kuwaiti banks to improve financial performance.
This document provides an executive summary and table of contents for a project report on quality management for an ERP implementation project at Saudi Electricity Company. The report will use a case study approach, first reviewing literature on critical success factors for ERP implementations including top management support, project management, and change management. It will then describe the ERP implementation project at SEC and analyze it in light of the literature.
This document describes a Process Combing approach for continual improvement of IT project delivery in well-governed organizations. The approach involves 6 steps: selecting a theme, establishing data, solidifying data, scouring for opportunities, expanding opportunities, and pulling out gems. It provides breadth across 12 themes and depth through a methodical process. The approach was applied in a case study at a large financial institution, where opportunities such as reusing test defects, automating approvals, eliminating waste, and standardizing templates were identified and evaluated for implementation.
Insights and Trends: Current Portfolio, Programme, and Project Management ...CollectiveKnowledge
2012 PWC's third global survey on the current state of project management. New study is starting now and will be release somewhere this year (2014). Meanwhile, this is only 2 years old, so quite relevant. A total of 1,524 respondents from 38 countries and within 34 industries shared their insights
Benchmarking : An essential Quality toolShubham Singh
The document describes a case study on benchmarking the manufacturing processes of garment manufacturing companies in Sri Lanka. Key steps included identifying relevant key performance indicators (KPIs) through industry visits, collecting data via questionnaires from 27 factories, developing conceptual performance measurement models, and calculating performance rankings across factories using multi-criteria decision making techniques like TOPSIS and AHP. The final performance rankings identified gaps and weakest areas to target for improvement through action plans. Benchmarking is presented as an essential quality tool for companies to assess performance against competitors and drive continuous improvement.
This is my presentation for the IAOP (International Association of Outsourcing Professionals) Masterclass Sourcing about leadership, governance en new ways of sourcing
Universität St. Gallens Framework for Corporate Data Quality Management?Torben Haagh
Data Governance, Datenkonsistenz und Datenqualität sind die Basis für ein effizientes internes & externes Meldewesen und somit für eine ertragsorientierte Gesamtbanksteuerung.Was aber sind die Rahmenbedingungen für ein erfolgreiches Datenqualitätsmanagement? Kennen Sie schon das Framework for Corporate Data Quality Management von der Universität St.Gallen? Laden Sie das kostenlose Whitepaper der Universität St. Gallen direkt hier herunter: http://bit.ly/-Whitepaper_UniversityStGallen
The Total Economic Impact of Using ThoughtWorks' Agile Development ApproachThoughtworks
This document analyzes the total economic impact of using ThoughtWorks' agile development approach based on interviews with four client organizations. It finds that clients saw benefits such as improved efficiency and quality from ThoughtWorks' experienced staff, and earlier delivery of key business requirements through the agile methodology. The analysis estimates potential returns on investment of 23-66% over three years for clients. It provides a framework for organizations to evaluate the potential costs and benefits of engaging ThoughtWorks for agile software projects.
This document provides an overview of business research methods and processes. It discusses key topics including the scientific method, types of research, data collection and analysis techniques. Examples are given of how business research is used in areas such as marketing, finance, and management. Guidelines are provided on when research should be undertaken and how it can help reduce uncertainty and improve decision-making for organizations.
This document discusses metrics that can be used to assess the effectiveness of business analytics initiatives. It summarizes the results of a benchmark study that evaluated organizations on 8 metrics: productivity, governance, timeliness, ROI, accuracy, effectiveness, empowerment and maturity. The study found that on average organizations scored highest in governance and lowest in effectiveness. Certain industries tended to score higher or lower on different metrics. The document recommends evaluating an organization across 64 questions related to the 8 metrics in order to identify strengths and opportunities for improvement.
This document discusses operations strategy and its development. It begins by defining strategy and describing the strategic management process. It then outlines the key steps in strategy formulation, including environmental scanning, internal analysis, and developing corporate, business, and functional strategies. The document also discusses developing an operations mission, objectives, priorities, and policies. It provides examples of operations objectives like cost, quality, delivery, and flexibility. Finally, it discusses elements of operations strategy like production system design, technology selection, and resource allocation.
This document provides an analysis of the business and financial performance of Nishat Chunian Limited (NCL) over a three year period from 2011-2013. It begins with an introduction to the research topic, objectives, and approach. It then discusses the textile industry in Pakistan and provides an overview of NCL. The document conducts an in-depth financial analysis of NCL through profitability, liquidity, gearing, and investors' ratios. It also includes a competitor analysis, PEST analysis, SWOT analysis, conclusions, and recommendations. The analysis finds that while NCL's sales increased in 2011, its gross profit margin declined due to rising cotton and energy costs. In 2012, NCL's sales
Pharmaceutical store management systemTushar Dalvi
Developed online in-house Application for Pharmacy Management. Used Salesforce as CRM software to develop login Form, customer inquiry Form, and other various forms, also used HTML & CSS for Webpage Designing.
This document provides an abstract for a dissertation that evaluates criteria used in supplier selection processes. The dissertation was submitted by Alan Kurien Punnoose to the University of Bath in partial fulfillment of an MSc in Management with Operations Management. It contains 14,545 words. The dissertation involves a qualitative case study of the supplier selection process at Aston Martin, a luxury car manufacturer. It uses interviews to collect data and evaluates Aston Martin's process using the Analytic Hierarchy Process (AHP) methodology for decision making. The dissertation aims to critically evaluate criteria for supplier selection and compare Aston Martin's process to the AHP methodology.
This document presents a research proposal to study the impact of employee turnover on the performance of Hoctief Construction Company Ltd. The research will use a mixed methods approach, collecting both quantitative and qualitative data. The literature review discusses conflicting views on whether turnover positively or negatively impacts performance. The research aims to determine the causes of turnover at Hoctief, measure its effects on performance, and identify ways to minimize turnover to increase performance. The methodology section evaluates the mixed methods approach and discusses its advantages for answering the research questions over a single methodology. Limitations are also acknowledged.
Effective supply chain management as a strategic advantage conducted at tss l...Projects Kart
1. The document discusses supply chain management at TSS, a cooperative society in Sirsi, India that has been operating since 1913.
2. TSS is a major player in the arecanut industry, procuring arecanut from farmers and distributing it to major domestic markets. Karnataka accounts for 46% of India's arecanut production, with Uttara Kannada contributing 11%.
3. The study aims to analyze TSS's supply chain management and understand customer expectations to help the management address any issues and better serve customers. Primary and secondary data will be collected through questionnaires and existing reports.
This document discusses supplier appraisal at Muteesa 1 Royal University. It defines supplier appraisal as the assessment of a potential supplier's ability to control quality, delivery, quantity, price and other contractual factors. Supplier appraisal should be conducted in two phases - pre-contract appraisal to assess past performance, and post-contract appraisal to evaluate performance in meeting contractual obligations. While time-consuming, supplier appraisal is important for high-value, high-risk purchases. The document examines how supplier appraisal is conducted at Muteesa 1 Royal University, focusing on factors like financial status, capacity, and communication.
This technical report explores intrapreneurship in an information systems service organization from the perspective of employees. It provides an overview of entrepreneurship theory and considers how this relates to intrapreneurship and information entrepreneurship. The report describes a survey of employees at an information systems service company to understand their perceptions of the organization's support for identifying and exploiting new opportunities. The findings show that while the company supports some entrepreneurial behaviors, employees overall feel the company does not support such behaviors. Recommendations are provided to improve the company's entrepreneurial profile.
Writekraft Research and Publications LLP was initially formed, informally, in 2006 by a group of scholars to help fellow students. Gradually, with several dissertations, thesis and assignments receiving acclaim and a good grade, Writekraft was officially founded in 2011 . Since its establishment, Writekraft Research & Publications LLP is Guiding and Mentoring PhD Scholars.
Our Mission
“To provide breakthrough research works to our clients through Perseverant efforts towards creativity and innovation”.
Vision
Writekraft endeavours to be the leading global research and publications company that will fulfil all research needs of our clients. We will achieve this vision through:
Analyzing every customer’s aims, objectives and purpose of research
Using advanced and latest tools and technique of research and analysis
Coordinating and including their own ideas and knowledge
Providing the desired inferences and results of the research
In the past decade, we have successfully assisted students from various universities in India and globally. We at Writekraft Research & Publications LLP head office in Kanpur, India are most trusted and professional Research, Writing, Guidance and Publication Service Provider for PhD. Our services meet all your PhD Admissions, Thesis Preparation and Research Paper Publication needs with highest regards for the quality you prefer.
LEAN LEVEL OF AN ORGANIZATION ASSESSED BASED ON FUZZY LOGIC csandit
To determine the lean level of an organization a methodology was developed. It was based on a
qualitative assessment approach, including quantitative basis, whose development was
supported using fuzzy logic. Recourse to the use of fuzzy logic is justified by its ability to cope
with uncertainty and imprecision on the input data, as well as, could be applied to the analysis
of qualitative variables of a system, turning them into quantitative values. A major advantage of
the developed approach is that it can be adjusted to any organization regardless of their nature,
size, strategy and market positioning. Furthermore, the proposed methodology allows the
systematically identification of constraint factors existing in an organization and, thus, provide
the necessary information to the manager to develop a holistic plan for continuous
improvement. To assess the robustness of the proposed approach, the methodology was applied
to a maintenance and manufacturing aeronautical organization.
The document discusses outsourcing as a change management tool in libraries and documentation centers. It defines outsourcing and examines how it can support the seven rules of organizational change, including strategic planning, marketing of services, and improving human resource management. The document outlines 10 reasons why outsourcing is considered a tool for change, such as improving cost control and profitability, accessing expertise, and freeing up internal resources to focus on innovation. In conclusion, it states that outsourcing can build relationships focused on shared goals beyond just cost reduction.
The document summarizes research assessing the service profit chain model in Kuwaiti banking. It presents the research objectives, questions, and hypotheses testing relationships between internal service quality, employee satisfaction and loyalty, customer satisfaction and loyalty, and financial performance. A conceptual framework is developed and data is collected from bank employees and customers. Structural equation modeling finds most relationships are significant and positive, supporting the service profit chain model. The research concludes the model can be used as a strategic decision-making tool by Kuwaiti banks to improve financial performance.
This document provides an executive summary and table of contents for a project report on quality management for an ERP implementation project at Saudi Electricity Company. The report will use a case study approach, first reviewing literature on critical success factors for ERP implementations including top management support, project management, and change management. It will then describe the ERP implementation project at SEC and analyze it in light of the literature.
This document describes a Process Combing approach for continual improvement of IT project delivery in well-governed organizations. The approach involves 6 steps: selecting a theme, establishing data, solidifying data, scouring for opportunities, expanding opportunities, and pulling out gems. It provides breadth across 12 themes and depth through a methodical process. The approach was applied in a case study at a large financial institution, where opportunities such as reusing test defects, automating approvals, eliminating waste, and standardizing templates were identified and evaluated for implementation.
Insights and Trends: Current Portfolio, Programme, and Project Management ...CollectiveKnowledge
2012 PWC's third global survey on the current state of project management. New study is starting now and will be release somewhere this year (2014). Meanwhile, this is only 2 years old, so quite relevant. A total of 1,524 respondents from 38 countries and within 34 industries shared their insights
Benchmarking : An essential Quality toolShubham Singh
The document describes a case study on benchmarking the manufacturing processes of garment manufacturing companies in Sri Lanka. Key steps included identifying relevant key performance indicators (KPIs) through industry visits, collecting data via questionnaires from 27 factories, developing conceptual performance measurement models, and calculating performance rankings across factories using multi-criteria decision making techniques like TOPSIS and AHP. The final performance rankings identified gaps and weakest areas to target for improvement through action plans. Benchmarking is presented as an essential quality tool for companies to assess performance against competitors and drive continuous improvement.
This is my presentation for the IAOP (International Association of Outsourcing Professionals) Masterclass Sourcing about leadership, governance en new ways of sourcing
Universität St. Gallens Framework for Corporate Data Quality Management?Torben Haagh
Data Governance, Datenkonsistenz und Datenqualität sind die Basis für ein effizientes internes & externes Meldewesen und somit für eine ertragsorientierte Gesamtbanksteuerung.Was aber sind die Rahmenbedingungen für ein erfolgreiches Datenqualitätsmanagement? Kennen Sie schon das Framework for Corporate Data Quality Management von der Universität St.Gallen? Laden Sie das kostenlose Whitepaper der Universität St. Gallen direkt hier herunter: http://bit.ly/-Whitepaper_UniversityStGallen
The Total Economic Impact of Using ThoughtWorks' Agile Development ApproachThoughtworks
This document analyzes the total economic impact of using ThoughtWorks' agile development approach based on interviews with four client organizations. It finds that clients saw benefits such as improved efficiency and quality from ThoughtWorks' experienced staff, and earlier delivery of key business requirements through the agile methodology. The analysis estimates potential returns on investment of 23-66% over three years for clients. It provides a framework for organizations to evaluate the potential costs and benefits of engaging ThoughtWorks for agile software projects.
This document provides an overview of business research methods and processes. It discusses key topics including the scientific method, types of research, data collection and analysis techniques. Examples are given of how business research is used in areas such as marketing, finance, and management. Guidelines are provided on when research should be undertaken and how it can help reduce uncertainty and improve decision-making for organizations.
This document discusses metrics that can be used to assess the effectiveness of business analytics initiatives. It summarizes the results of a benchmark study that evaluated organizations on 8 metrics: productivity, governance, timeliness, ROI, accuracy, effectiveness, empowerment and maturity. The study found that on average organizations scored highest in governance and lowest in effectiveness. Certain industries tended to score higher or lower on different metrics. The document recommends evaluating an organization across 64 questions related to the 8 metrics in order to identify strengths and opportunities for improvement.
This document discusses operations strategy and its development. It begins by defining strategy and describing the strategic management process. It then outlines the key steps in strategy formulation, including environmental scanning, internal analysis, and developing corporate, business, and functional strategies. The document also discusses developing an operations mission, objectives, priorities, and policies. It provides examples of operations objectives like cost, quality, delivery, and flexibility. Finally, it discusses elements of operations strategy like production system design, technology selection, and resource allocation.
This document provides an analysis of the business and financial performance of Nishat Chunian Limited (NCL) over a three year period from 2011-2013. It begins with an introduction to the research topic, objectives, and approach. It then discusses the textile industry in Pakistan and provides an overview of NCL. The document conducts an in-depth financial analysis of NCL through profitability, liquidity, gearing, and investors' ratios. It also includes a competitor analysis, PEST analysis, SWOT analysis, conclusions, and recommendations. The analysis finds that while NCL's sales increased in 2011, its gross profit margin declined due to rising cotton and energy costs. In 2012, NCL's sales
The document summarizes the findings of a study on software testing market trends, service providers, and success factors. Some key findings include:
- Most companies see software testing as important and are optimizing their testing activities, often by increasing outsourcing to external testing specialists. Collaboration with external providers can improve testing flexibility, quality, and cost-efficiency.
- When selecting external testing partners, companies prioritize factors like the ability to achieve objectives, results-oriented pricing models, and linguistic capabilities for global projects.
- SQS is a leading independent testing specialist that offers blended service delivery and transparent performance-based billing. Their competencies align well with what companies are looking for in external testing providers.
The Total Economic Impact of Using ThoughtWorks' Agile Development ApproachThoughtworks
The document analyzes the total economic impact of using ThoughtWorks' agile development approach based on interviews with four of ThoughtWorks' customers. It finds that the customers experienced benefits such as improved efficiency, reduced defects, and faster delivery of key business requirements. It constructs a financial model for a composite organization based on these customers, estimating a three-year ROI of 29% after adjusting for risks. The analysis indicates that agile development with ThoughtWorks can provide a significant return exceeding typical hurdle rates for IT investments.
This document examines the impact of customer relationship management (CRM) activities on the product innovation process. It proposes and tests four models of the relationships between key CRM activities (information sharing, customer involvement, long-term partnerships, joint problem-solving, and technology-based CRM) and the four stages of innovation (initiation, input, throughput, output). Survey data from 83 respondents is used to conduct regression analyses of the relationships. The results indicate that information sharing enhances innovation throughput and output. Customer involvement and joint problem-solving positively influence throughput, while long-term partnerships impact output. CRM activities do not impact initiation or input. Technology-based CRM is the least effective mechanism. The findings provide guidance on align
1
Lean Supply Chain Management
2
Table of contents
1. Introduction ............................................................................................................ 3
1.1 What is lean ……………………………………………………………………… 4
2. Why leans supply chain is needed?........................................................................ 5
3. Benefits of lean supply chain management .......................................................... 6
4. Implementation of Lean SCM: ................................................................................... 6
5. Challenges faced while implementing lean SCM: .................................................... 8
6 .Best practices that support Lean SCM process:.......................................................... 9
7. Concluding remarks................................................................................................ 11
8. References. .................................................................................................... 12
3
Lean supply chain management
1-Introduction
Supply chain is an established network of processes that starts from procurement of raw material;
conversion of raw material into final product and then distribution of that finished product to
customers. Over last two decades, the concept of lean supply chain management has gained great
importance from both academics and practitioners. To gain competitive advantages and to
survive in this dynamic environment firm are in need of delivering quality product with
minimum wastage of resources. Therefore the concept of lean Supply chain management is more
practical now a day’s then before it. Lean production is an integrated activity in SCM that is
aimed at achieving high volume production with minimum wastage of raw materials. It focuses
on improving the efficiency of processes on continuous basis, minimizing wastage and
eliminating almost all activities that does add any value in overall supply chain. Lean production
is considered a innovative way of thinking and thus it includes the integration of firms vision,
culture and strategy in such a way that it can serve the customer by providing high quality
product with in low cost and on short delivery Alabama Technology Network, 1998; Inman,
1999; Davis and Heineke,( 2005) cited by Agus& Hajinoor(2012).
Lean production is such a socio-technical system that is aimed on removing wastage by
minimizing supplier, customers and internal variability among firms operations. Lean production
is not only element that helps in achieving goals of Lean Supply Chain, it also includes product
development phase and aspects of distribution channel. Firms that want to implement LSCM
must also manage variable supply of product, processing time, demand ...
Leanness Assessment using Fuzzy Logic Approach: A Case of Indian Horn Manufac...IIRindia
Lean principles are being implemented by many industries today that focus on improving the efficiency of the operations for reducing the waste, efforts and consumption. Organizations implementing lean principles can be assessed using the some tools. This paper attempts to assess the lean implementation in a leading Horn manufacturing industry in South India. The twofold objectives are set to be achieved through this paper. First is to find the leanness level of a manufacturing organization for which a horn manufacturing company has been selected as the case company. Second is to find the critical obstacles for the lean implementation. The fuzzy logic computation method is used to extract the perceptions about the particular variables by using linguistic values and then match it with fuzzy numbers to compute the precise value of the leanness level of the organization. Based on the results obtained from this analysis, it was found that the case study company has performed in the lean to vey lean range and the weaker areas have been identified to improve the performance further.
Requirements Workshop -Text Analytics System - Serene ZawaydehSerene Zawaydeh
This document provides an overview of a requirements workshop for a text analytics system. It discusses preparing for the workshop by interviewing stakeholders and understanding existing processes. The workshop would explore business requirements like delivery timeline and budget, and requirements for the text analytics system like processing unstructured data from different communication channels. Strengths of a requirements workshop include gaining agreement on priorities, but weaknesses include potential issues from stakeholders not being identified prior to the workshop.
The document discusses the key findings of a survey of over 200 European process excellence professionals. It found that 69% plan to invest in operational excellence in the next year. Operations was identified as needing the most process improvement work. Improving customer satisfaction through efficiency and quality was seen as the top benefit of process excellence initiatives. The most used methodologies were found to be business process management, Lean, Lean Six Sigma, and Agile. Artificial intelligence use was still low.
1. Tools and methods to implement an effective
outsourcing process to obtain a quality service:
A case study of Itis shopping centre
Rashid, Md. Harun Or
2016 Laurea
2. 2
Laurea University of Applied Sciences
Leppävaara
Tools and methods to implement an effective outsourcing process
to obtain a quality service: A case study of Itis shopping centre
Rashid, Md. Harun Or
Degree Programme in Facility Management
Bachelor’s Thesis
December, 2016
3. 3
Laurea University of Applied Sciences Abstract
Degree Programme in Facility Management
Bachelor’s Thesis
Rashid, Md. Harun Or
Tools and methods to implement an effective outsourcing process to obtain a quality ser-
vice: A case study of Itis shopping centre.
Year 2016 Pages 51
Itis shopping centre is one of the largest shopping centres in Finland. It has outsourced differ-
ent facility services to support its core business. The aim of this research was to find out the
tools and methods case company is using to implement an effective outsourcing process to
obtain a quality service. The theoretical background discusses facility management, service
quality, quality systems, the procurement process, the key drivers and challenges of out-
sourcing services, service specification, and contracts and the service level agreement.
A single case study strategy was applied in this qualitative research. Two semi-structured in-
terviews were conducted with the cleaning and security manager to collect the relevant data
for this research. Later on, facility managers of the case company, namely, shopping centre
manager, maintenance manager, cleaning and security manager were interviewed by using a
close ending questionnaire. Data collected from the interviews were analysed according to
the themes developed from the theoretical framework.
The result of the interviews suggest that the case company has implemented an effective out-
sourcing process to obtain a quality service by using the following tools and methods, needs
assessment, risk and opportunity assessment, developing the service specification, invitation
to tender, tender assessment, negotiation, service level agreement, contract, performance
monitoring. The Case Company is using all the tools and methods effectively to obtain a quali-
ty service. This research suggests that quality is obtained by these tools and methods.
The research also suggests that for the purpose of innovation and development, the case
company has an opportunity to benchmark the service level agreement, service specification,
and the performance monitoring system with the other organizations to get new concepts and
ideas.
Keywords Facility management, Outsourcing, Procurement process, Quality service,
Quality system, Performance monitoring, Key drivers of outsourcing,
Challenges of outsourcing, Service level agreement, Service specification
4. 4
Table of contents
1 Introduction.........................................................................................5
1.1 Background of the research ..............................................................5
1.2 Research aim and questions..............................................................6
1.3 Case Company-Kauppakeskus Itäkeskus oy ............................................6
1.3.1 Company Profile ....................................................................6
1.3.2 The role of outsourcing in Itis....................................................8
2 Theoretical background...........................................................................9
2.1 Facility management ......................................................................9
2.2 What is Quality? .......................................................................... 10
2.3 Quality system ............................................................................ 12
2.4 Outsourcing: Key drivers and challenges of outsourcing facility services...... 12
2.5 Procurement process .................................................................... 16
2.6 An effective contract and service level agreement................................ 19
2.7 Service specification..................................................................... 21
3 Methodology ...................................................................................... 23
3.1 Qualitative research ..................................................................... 23
3.2 Research approach and strategy ...................................................... 23
3.3 Data collection methods ................................................................ 24
3.4 Reliability and credibility............................................................... 24
4 Results and analysis ............................................................................. 25
4.1 The key drivers and challenges of outsourcing facility services ................. 25
4.2 Procurement process .................................................................... 27
4.2.1 Request for tender ............................................................... 28
4.2.2 Request for information......................................................... 28
4.2.3 Tender assessment............................................................... 28
4.3 Contract and service level agreement ............................................... 29
4.4 Service specification..................................................................... 30
4.5 Performance monitoring ................................................................ 31
4.6 Health and safety in Itis ................................................................ 32
4.7 Quality system in Itis ................................................................... 33
5 Discussion.......................................................................................... 35
6 Recommendation and conclusion ............................................................. 38
6.1 Recommendation......................................................................... 38
6.2 Conclusion ................................................................................. 39
References ................................................................................................ 41
Figures ..................................................................................................... 43
Tables ...................................................................................................... 44
Appendix................................................................................................... 45
5. 5
1 Introduction
1.1 Background of the research
Outsourcing can be defined “strategic use of the outside expertise and resources to perform
activities traditionally handle by internal staff and resources” Pine (2016). According to Pow-
er, Desouza and Bonifazi (2006, 1) “Out sourcing is made of two words-out and sourcing.
Sourcing means the act of transferring work, responsibilities and decision making to someone
else”.
Outsourcing is a growing business trend. The trend of outsourcing facility service continues as
organizations seek to concentrate on long term personnel and resources (Rondeau, Brown,
Lapides 2006, 2). Cost saving is one of the common reasons for outsourcing services (Ashley
2008). Outsourced service providers are considered to do the job better, cheaper and more
quickly (Booty and Taylor 2009, 256). According to Pine (2016) Outsourcing is a business strat-
egy. An organization contracts out major functions to specialist and efficient service provid-
ers.
However, a research conducted by the International Facility Management Association (IFMA
2006) on the practice of outsourcing in the facility management field. It suggests that in 15
years outsourcing becomes a common business phenomenon, but not always a popular deci-
sion by those affected. 2 in 5 companies have brought services back in-house from the out-
sourced services. The common reasons are to gain control over service, terms of cost, quality
or response time. Beside that 78% facility executives consider that one of the major challeng-
es of outsourcing is ensuring that the company is getting the correct level of service. 52% of
the facility managers refer the developing the trust with the service providers is another chal-
lenge for the company (IFMA 2006, 19). According to Theriault (2007) this statistic suggests
that there is a significant gap between the outsourcing initiative and its implementation.
Power et el. (2006, 1) suggest that “one would hope that with the rise in outsourcing as a
business phenomenon, managers and executives would be better equipped to handle the
many challenges associated with outsourcing”. Similarly, Edwards (2012, 140) points out that
outsourcing transfers the responsibilities in the sense of labour and equipment to the service
providers. However, it does not transfer the management responsibility for the property to
the contractor. The responsibility remains to the facility manager to keep the property in a
profitable condition.
6. 6
1.2 Research aim and questions
The aim of this research is to find out tools and methods the case company is using to imple-
ment an effective outsourcing process to obtain a quality service. The research is derived
from the hypothesis that essential facility management tools and methods are required to
implement an effective outsourcing process to obtain a quality service. Therefore, the aim of
this research is to answer the following questions:
1. What are the existing facility management tools and methods the case company is using to
implement an effective outsourcing process?
2. How quality is obtained by these tools and methods?
3. What are the key drivers and challenges of outsourcing facility services in the case compa-
ny?
4. Are there any opportunities for the case company to develop existing tools and methods?
1.3 Case Company-Kauppakeskus Itäkeskus oy
1.3.1 Company Profile
Itis shopping centre is the largest shopping centre in Finland, which was opened in 1984. The
shopping centre is located in the district of Itäkeskus in East Helsinki and owned by Dutch real
estate company Wereldhave N. V.
Figure 1: Itis shopping centre on Google Map (Google 2016).
7. 7
Figure 1 shows the Itis shopping centre on google map. Itäkeskus metro station is a short walk
away from the Itis shopping centre. From the Helsinki railway station, it takes around 12
minutes to arrive to the shopping centre by the Metro. Regular bus services are available and
easily accessible from and to the shopping centre. There are more than 150 shops and 4000
free parking areas for the customers. Shopping centre’s atmosphere is friendly and interna-
tional. It provides various services for the customers, including Eco-point, Gift card, Push-
chairs for children, Lost & Found, Bitcoin ATM, Parcel Point, Bicycle parking areas, Parking,
Storage lockers, Wheelchairs, Photo booth, Wi-Fi, Toilet, Charging station for the mobile, Info
service (itis 2016).
Name of the company Kauppakeskus Itäkeskus oy
Location Itakeskus, Helsinki
Address Itäkatu 1-7, 00930 Helsinki
Date of establishment 1984
Owner Wereldhave NV
Rental area 103,000m2
Number of shops More than 150
Number of visitor per year est.(million) 17m
Number of visitor in 2015(million)** 19.5
Annual sale in 2015( million)** 376.1
website www.itis.fi
Table 1: Company Profile-Kauppakeskus Itäkeskus oy (itis 2016)
** According to Finnish Council of Shopping Centre (2016).
In the year 2015, Itis was awarded the best shopping centre in the Finland by the Nordic
Council of the Shopping Centre. In the same year, it achieved an in-use BREEM certificate
“very good” for building and asset management. Over 110€ million euros were invested to
renovate the shopping centre in the year 2011-2014. In addition, technological development
and investment in the safety, security and cleanliness areas make Itis reasonably one of the
safest and cleanest shopping centres in the Finland. In ML’s own words,
“Itis is arguably the safest and cleanest shopping centre. We have really invested in these two
subjects in past few years to exceed the customer expectations” “Itis is the largest shopping
centre in Finland. As a company we are ambitious and aim to set new standards for Finnish
Shopping Centre” (ML).
Itis has been offering the customers a unique shopping atmosphere since 1984. As a result,
the development and investment are designed to exceed the customers’ expectations. ML
8. 8
emphasises that the core values of the Itis are ambition, entrepreneurship, teamwork and
transparency.
1.3.2 The role of outsourcing in Itis
According to the interviewee, Itis has been outsourcing approximately 50 different services.
The largest outsourcing services are cleaning, maintenance, security and technical mainte-
nance. Beside that some part of the supporting services such as, info, a kids play area, some
part of the marketing activities, event management are maintained by outsourcing employ-
ees. In ML’s own words-
“Itis has outsourced a lot of different services, at least 50 different services. Largest out-
source services are facility services such as cleaning, security, maintenance and technical
maintenance. Further also for example staffing of Itis play area and event implementation
and some marketing services are outsourced” (ML)
Figure 2: The Key outsourcing facility and supporting service in Itis
The figure 2 shows that Itis has outsourced the key facility and supporting services in the
property. It suggests that facility and supporting service have a significant role to support the
core business. Therefore, it is essential to implement an effective outsourcing process to ob-
tain a quality service.
Facility services
Cleaning
Maintenance
Security
Waste management
Technical maintance
Parking enforcement
Construction consulting
Supporting
services
Info
Event management
kids play area
IT help desk services
Trolley service
Part of marketing services
9. 9
2 Theoretical background
This theoretical section discusses the relevant theories to answer the research questions. As a
result, this section focuses on defining, facility management, quality, quality system, key
drivers and challenges of outsourcing facility services, Procurement process, Service level
agreement and contract, and Service specification.
2.1 Facility management
According to Alexander (1996, 1) “Facility management is a profession that encompasses mul-
tiple disciplines to ensure functionality of the built environment by integrating people, place,
process and technology”. It is an interdisciplinary business function which integrates the peo-
ple, place and process to achieve the strategic goals. The main objective of the facility man-
agement is to support the core business by ensuring all the facilities including buildings, sys-
tems and services contribute to the core business. As a result, it concentrates on satisfying
customers’ demands by utilizing resources, improving quality, reducing risks and ensuring val-
ue added services for the stakeholders.
Alexander (1996, 2) continues with the scope of the facility management discipline which co-
vers all aspects of the property, space, environment, health and safety. In general, the disci-
pline of facility management is all about to set out the policies, corporate guidelines and
standards in order to response to the vital issues such as space allocation and charging, health
and safety, environment and employment contract. Therefore, it is crucial to set out facility
users’ oriented policies and guidelines which will have a positive impact on the corporation.
Atkin & Brooks (2009, 1, 13) define the facility management in the same way like Alexander.
By comparison, there is useful guidance, which enhances the importance of facility manage-
ment. Facility management coordinates with people and process, supports the well-being of
the individual, delivers the effective and efficient services, and creates the value for the core
business. Therefore, facility management’s strategies should incorporate with the financial
objectives of the organization, procurement strategy, in house/outsourcing strategy, human
resources plan, ICT strategy, Customer requirements, quality, cost and time objectives. In
that cause, the rapid changes in the ICT and advance development in other forms of smart
devices should be taken into consideration to keep the premises highly integrated for the fa-
cility users (Atkin & Brooks 2009, 1, 13).
The above-mentioned theories outlet the facility management and how it deals with different
aspects of the organization. Furthermore, Barrett and Finch (2014, 8-12) add the typical facil-
ity management activities for a facility manager.
10. 10
Facility planning Building operation and maintenance
Strategic space planning
Furniture layout
Set corporate planning and standards and
guidelines
Monitor space use
Select and control use of furniture
Security
Energy management
Monitor performance
Cleaning and decoration
Maintain building fabric
Waste management and recycling
Real estate and building construction General/Office service
Acquisition and disposal
Construction management
Advice on property investment
Control of capital budgets
Provide and manage support services
Housekeeping standards
Health and safety
Office purchasing
Non building contract services such as cater-
ing ,travel
Table 2: Typical facility management activities (Barrett and Finch 2014, 9)
In general, it depends on the size and level of the services in the organization to determine
the need of a facility manager and its responsibilities. A facility manager can be responsible
for the provision of many different services as table 2 illustrates. But it is not necessary to
engage with every single stage of the delivery; where it is necessary to empower all other
functional units or departmental managers (catering, maintenance, security, housekeeping,
cleaning) to take decision to run the organization effectively and efficiently. Therefore, cen-
tralized and decentralized decision making process should be discussed profoundly to main-
tain the daily operation smoothly (Barrett and Finch 2014, 11).
2.2 What is Quality?
According to Alexander (1996, 60, 61) “Quality is continually satisfying the customer’s re-
quirements”. As far as facility management concern, quality is satisfying customer’s require-
ments, reducing the cost and waste by doing the tasks adequately and economically. To some
extent, reliable service and cost efficiency are the basic demand of the customers. As a con-
sequence, a facility manager should have to know that what are the customer’s demands and,
how to manage it on time.
It is important to understand what determines quality, because a quality service is a key ele-
ment to satisfy customer’s needs. In order to manage the quality, it is a crucial task to define
the quality. In a short phase, quality is satisfying the customer or client requirements. One of
the main aspects of the quality is the presence of defects. Every single working process has
innumerable points at which a defect may occur. Because of this, all the possible areas where
11. 11
a defect may occur should be identified beforehand. When a service level requirement is
clear, it is easier to allocate the resources to meet the customers demand by taking all possi-
ble defects into consideration (Rondeau et el. 2006, 46, 47).
Barker (2013, 72, 73) defines the quality precisely. Quality in terms of service consists of four
essential components, which are excellence, compliance, intelligence and review. Quality
does not have a starting or ending point, it is an ongoing tool, which is better of using to
analysis and develops the service.
In fact, excellence should not have to be the best that money can buy. It is possible to attain
an excellent service on a meagre budget, which depends on how the definition of the excel-
lence defines. Excellence is to perform and achieve the best possible outcomes within the
given set of parameters. In order to maintain a quality service, it is crucial to set the parame-
ters of the service and a clear planning (Barker 2013, 72).
Initially, Compliance is a well-understood matter of adhering to laws and regulations. In the
wider sense, compliance is setting the strategic objectives and aspiring to achieve the goals.
To some extent, compliance is an audit. It helps to reset the goals for an organization. Quali-
ty does not come into exit without an intelligence decision. In general, a manager works as an
intelligence that keeps an open mind to keep the system update. Intelligence is all about set-
ting the goals for the organization and working closely to achieve the organizational goals
(Barker 2013, 72, 73).
Figure 3: Four components of a quality service (Barker 2013, 72, 73).
Where applicable, quality should be reviewed on a regular scale. It allows a facility manager
to create a clear picture of achievable along with non-achievable tasks. Review is not just
looking into the problems; it is all about getting familiar with the services deeply. What
Quality
Intelligence
Complience
ReviewExcellence
12. 12
should be done to make the service better than now, and how to overcome the weakest
points in the next level? (Barker 2013, 73).
2.3 Quality system
According to Alexander (1996, 67), it is beneficial to have a plan how to achieve the TQM ei-
ther by a supplier or in-house. As far as a supplier concern, it is worthwhile to trust a supplier
who has secured or on the away to attain the international recognizable standards, such as
ISO, BS and IiP. Wiggins (2010, 504) emphasises that FMs should have to familiar with the
quality standards and accreditation schemes, which is more suitable to the built environment.
Figure 4: Quality assurance (Wiggins 2010, 504)
British standards (BS5750), International standards (ISO 9000), Investors in people (Iip) are
well known quality standards and accreditation schemes, which can be awarded to an eligible
organization either by self-certification or an external assessor. In order to ensure a systemat-
ic process to implement the FMs activities, Quality assurance should be given a top priority
(Wiggins 2010, 504).
However, Atkins & Brooks (2009, 117) emphasise that if a client organization wants to obtain
a satisfactory level of service, it should maintain a quality system and require its service pro-
vider to do the same. Quality systems should be an essential part of the service provision.
Service providers should apply the principles of quality assurance to create a value added ser-
vice. A quality assured approach can save money and time by reducing the errors and rework-
ing. Therefore, quality should be one of the criteria to assess the tenders of prospective ser-
vice providers.
2.4 Outsourcing: Key drivers and challenges of outsourcing facility services
Barker (2013, 106) defines the outsourcing as a process to buy a service from the market.
•On a regular
basis
•What you
have done
•What you
plan
•What you
do
Plan Do
Measurem
ent
Record
13. 13
Taylor and Booty (2009, 256) state that now days outscoring is a common business practice.
There is a growing trend in the commercial real estate to outsourcing facility services from
the external firms (Edwards 2012, 140). There are two types of outsourcing, which has a dif-
ferent approach and needed to be dealt with separately. One is buying a contracted service
from an external service provider, and another is required market testing an in-house func-
tion.
Figure 5: Outsourcing FM models (Wiggins 2010, 40).
Figure 5 shows that there are different models to outsource services. This figure shows that
from single outsourcing contract to bundle outsourcing contracts managed by in-house man-
agement. Some organizations may choose a managing agent for the outsourced team.
Barker (2013, 107) suggests that the outsourcing decision should not be taken lightly. It is es-
sential to assess the outsourcing implication and its effect on the organization in advance.
Barker (2013, 107) states that it is important to identify the advantages and challenges of
each individual contract to find out the reasons for outsourcing in the first place, which will
help the organization to identify the goals of each contract for a long term.
Figure 6: Relationship between in-house and outsourced operations (Wiggins 2010, 39)
Figure 6 shows that these will be always a minimum in-house team retained for control and
direction of outsourced organization. Atkin and Brooks (2015, 99) state that whether or not to
outsource should be based on best available information. The information should be used to
understand the needs. The risks and opportunities regarding the outsourcing decision should
14. 14
be identified and assessed. Likewise, Stakeholder engagement is necessary to identify the
stakeholders’ needs as end-users (Atkin & Brooks 2015, 99).
Wiggins (2010, 38) states that One of the primary reasons for outsourcing is to reduce the op-
erating cost. Doing so, companies can take off the non-core activities and concentrate more
on core activities. Furthermore, service providers offer the expertise and specialist that can
bring change through innovation for the companies. Taylor and Booty (2009, 256) state that
normally outsourcing decision is made based on financial reasons and it is expected that out-
side expertise can do the work better, cheaper and faster.
According to Edwards (2012, 141) many specialized requirements are seasonal or schedule
over a long period of time such as, ceiling inspections and repair, boiler cleaning, duct clean-
ing, winterization of swimming pools. Because of this, specialized worker and expertise are
required to perform these kinds of activities. Beside that certain activities such as, elevator
repair, maintenance of safety and security equipment and installation of electrical wiring
must be maintained to prescribed or mandated standards. Despite this, these kinds of acti-
vates involve higher financial and safety risk. As a result, outsourcing moves the liabilities of
improper work to the contractor (Edwards 2012, 141).
One of the main aims of the facility management is to keep the property in a profitable con-
dition. A specialist contractor can ensure the specialized maintenance activities, which are
expensive in the sense of labour, equipment and materials. Latest equipment and specialist
worker add the value and reduce the operating cost for the internal technicians. Moreover,
Outscoring removes the typical obstacles of the human resource activities, including payroll,
recruitment, training, and career plan for an individual worker. As a result, it transfers the
responsibilities and liabilities to the contractor, which creates the simplicity and transparency
in the organization (Edwards 2012, 141).
Key drivers of outsourcing facility service
1 Cost efficiency 4 Supporting core activities
2 Expertise 5 Reducing the financial risk
3 Quality 6 Productivity
Table 3: Key drivers of outsourcing facility service (Edwards 2012, 141)
Table 3 shows the key drivers of outsourcing facility services. However, outsourcing is not
typically import the positive effect in the organization; it may end up costing more than pre-
vious service. If the service requirement is not clear, there is no variation clause to change
the service specification and service agreement, when it is required, it will cost an organiza-
tion as long as a correction has made. In that cause, all the termination clauses, penalties for
15. 15
branch of contract, variation clause to change the service level and service agreement should
be written in the contract. Service specification needs to be watertight to maintain the ser-
vice quality. Otherwise, a long-term contract with a poor performance will increase the cost
for an organization (Barker 2013, 108,109).
Losing control over the contractors’ workers for their work and operation is another challenge
for a facility manager. Particularly, outside employees may not have the same motivation or
loyalty as in-house employees. It is an important task to implement a quality control policy to
monitor the performance of the service providers to ensure the quality of service. Besides
that, a system of accountability and inspections could be developed to keep the property in a
profitable condition (Edwards 2012, 142).
Generally the legal agreement between the contractor and an organization make a path way
for the outside worker to perform the work in the property. Because of this, a facility manag-
er does not have a role or solely responsible to check the outside workers ability to work, ca-
pacity to meet the organization needs and ethical business practices. Therefore, facility man-
ager must develop a system to screen the outside employees to maintain the service quality
(Edwards 2012, 142).
According to Edwards (2012, 142) it is important to ensure the safety and security of the or-
ganization. Therefore, a service provider must be required to interview the employees to
choose the right employees for the organization. In the same way, facility manager should
have a list of each individual worker, who has been assigned to commence the work in the
premises. At the same time, it should be monitored and updated on a regular base (Edwards
2012, 142).
The challenges of outsourcing
1 Financial ,legal and disruption risks
2 Losing control over employees
3 Lake of loyalty and motivation of the worker
4 Security risks
5 Risk to corporate image
6 Unskilled worker
Table 4: The challenges of outsourcing (Edwards 2012, 142)
Dealing with the reaction time to response to an emergency work is expensive. Therefore,
Edwards (2012, 142) suggests that on a large property, internal staff should retain an emer-
gency capability to reduce the reaction time to response to the emergency work. Though
normal routine works such as landscaping, painting, cleaning, or preventive maintenance
16. 16
work do not need to be considered for possible emergencies, special attention should be giv-
en in key areas such as plumbing, HVAC (heating ,ventilation and air conditioning), electrici-
ty. Reaction time requirements should be included in the contractual agreement, where the
service provider must meet the responding time requirements (Edwards 2012, 142).
2.5 Procurement process
According to Wiggins (2010, 170), Facility management plays an important role in the organi-
zation, when it comes to manage a purchasing budget in a cost effective way. In order to get
the right service in the right place, it is required to develop the procurement strategies, ser-
vice specification, and service level agreement for the organization. At the same time, suita-
ble cost model could be used to assess the service provider’s proposal and compliance to the
contract. However, procurement strategy of an organization should be unique, which will re-
flect the values, custom and the culture of the organization itself. For example, In EU key
principles of the public sector procurement are accountability and transference. On the other
hand, private sector is free to have their own procurement strategies, procurement process
and awarding of the tenderer (Wiggins 2010, 170-172).
Procurement process has different process and procedure, which must be followed by an organi-
zation to find a solid base for the service delivery. Because of this, Procurement process
should be supported by a time plan, agenda or Gantt chart, which will show the activities,
tasks and resources. However, when it requires to prepare a schedule or agenda, it is worth-
while to make it network based. In the meantime, resources should be allocated to individual
department in advance to ensure all the proposals go through a feasibility test (Atkin &
Brooks 2015, 122).
Figure 7: The procurement process (Atkin & Brooks 2015, 123)
Establish the
baseline
Develop
policy and
procedures
Prequalify
service
providers
Request
proposals
Obtain
tenders and
evaluate
Formalize
contract
Mobilize/Dem
obilize
Manage
contracts
Manage
performance
17. 17
Figure 7 shows the procurement process. Patel & Aran (2005, 137) state that “A systematic
analysis of the perspectives of all stakeholder groups is an invaluable tool ". This process in-
volves identifying the stakeholders namely, employee, customers, community, regulator, and
then identifying the needs of the stakeholder based on the relative importance issues such as
security, quality, and economic impact. The needs of the stakeholders should be used as a
baseline for outsourcing. Therefore, stakeholders mapping or engagement should be dynamic,
as the needs and concerns of the stakeholders will evolve with the time. This process is im-
portant to understand the current and future stakeholder’s concerns regarding the outsourc-
ing services (Patel & Aran 2005, 137).
Once a basic draft of the proposed outsourcing is prepared, the following step is to find out
an outsourcing service provider. A client organization can use various ways to find out out-
sourcing service providers. Traditionally, a list of potential service providers can be prepared
from industry association directories. Reference for the listed service providers can be ob-
tained from the experts and experience managers. Another approach of finding the service
providers is to set service provider qualification. A client organization makes the service pro-
vider's qualification based on its needs, organizational goals and strategic planning. The ser-
vice provider’s qualification may include the price, service delivery, quality service, security,
customer satisfaction, quality improvement and financial strength. A request for information
(RFI) can be sent to the potential service providers to ask the price and other qualification
criteria with which the client organization is most interested in (Schniederjans, M. Schnieder-
jans, A. Schniederjans, D 2005, 56).
A request for information should be prepared and issued to the prospective service providers.
RFI can determine the service providers’ capacity and capability to provide the service. RFI
varies company to company, however, it should request useful information such as ownership
of the company, competences, area of specialization, technical skills, financial capacity, and
social corporate responsibility, HSE policy, references and quality system ( Atkin & Brooks
2015, 128).
Invitation to tender can be sent to the right service provider in many ways. Booty and Taylor
suggests that appropriate trade journal or newspaper could be a possible way to send the in-
vitation to tender. It creates the opportunities to get the right service provider from the wid-
er range. On the other hand, a company can limit the number of bids by preparing invitation
to tender to the preselected service providers who are already known to the company (Booty
and Taylor 2009, 260).
18. 18
Figure 8: The procurement timeline (Atkin & Brooks 2015, 124).
Figure 8 shows the procurement timeline. In general, an organization may adopt either cen-
tralized or decentralized procurement process, in some case, it may apply both. However, it
is crucial for an organization to be clear regarding local and centralized procurement process
to gain strategic advantage over certain contracts. Despite this, an organization should devel-
op the procurement policy and procedure that will reflect the best practice in a number of
key areas (Atkin & Brooks, 2015, 122).
According to Atkin & Brooks (2015, 124, 125) procurement policy should cover following poli-
cies, none of these should be omitted without a good cause.
Subjects Area to cover
Compliance Compliance to internal and external standards including HSSE
Manual of authorities Authorized personnel to deal with different issue of the procure-
ment.
Stakeholders Nature of stakeholder’s involvement in different stage in the pro-
curement process.
Corporate social re-
sponsibility
Principles and initiative
Bribery and anti-
competitiveness
Means to prevent unethical behaviour
Dispute resolution Process and procedure
Risks and opportuni-
ties
Identification, evaluation and action
Contract manage-
ment
Contractual relationship in between supplier and an organization
ICT Use of systems
19. 19
Performance meas-
urement
Process and procedure that should be linked with payment, incen-
tives and penalties
Intellectual property Identification and rights of intellectual property
Public procurement
regulation
EU or national public procurement legislation , if applicable
Freedom of Infor-
mation
Legislation concerning freedom of information , if applicable
Table 5 : Essential areas of the procurement policies (Atkin & Brooks 2015, 124, 125)
An organization may have a distinct function for the procurement of the goods and services.
However, Procurement should be considered as a distinct function, which is better managed
by an organized role. In addition, lack of internal competence and skills of procurement, ex-
pert advice from an external source or agent could be used to fulfil the role (Atkin & Brooks
2015, 126).
2.6 An effective contract and service level agreement
Edwards (2012, 142) states that key to outsourcing is the written agreement or contract. Ac-
cording to Cullen (2009, 13) Outsourcing contract or agreement consist of important docu-
ments, which set out the legal, commercial and operational framework of the contract. Ser-
vice level agreement, Financial schedule, Governance charter are essential elements to form
a contract. Johnston and Benyon (2006, 10, 11) state that Service level agreements are one of
the most important aspects of the service agreement or contract. Therefore, Johnston and
Benyon (2006, 10, 11) suggest that contract must include service level agreement to make it
valuable.
Figure 9: Key governing documents of contract (Cullen 2009, 14).
Figure 9 shows the key governing documents of the contract. Here financial schedule means
the process, in which agreed work will be billed and Governance charter means that how the
Condition of contract
Service level agreement Financial Schedule Governance Charter
20. 20
parties will manage the contract (Cullen 2009, 14). According to Barker (2013, 289) a service
level agreements define the service, service standards, quality requirements. It also defines
the responsibilities and the priorities of both parties.
Components of service level agreements
Service specification Disputes resolution procedures
Service standards Performance monitoring mechanisms
Quality requirements Termination conditions by both parties
Payment terms Legal compliance
Responsibilities of service providers Quality management
Table 6: Elements of service level agreement (Barker 2013, 290).
Table 6 shows the elements of service level agreements. Cordall (2016) suggests that the ser-
vice level agreement should contain the following elements, overall objectives of the service,
service description, performance standards, compensation, and critical failure. According to
Cordall (2016) Service description defines the details of the service. Performance standards
describe the expected service standards. Compensation clarifies the financial consequence if
service providers do not achieve the service levels. Critical failure means the overall service
performance fall below standard level. Here Cordall (2016) suggests that client organization
should have the right to terminate the contract for the critical failure.
In addition, Cordall (2016) explains that pricing may need to change on a number of factors.
As a result, the service level agreement should include a price review provision in order to
save cost. Besides that, the service level agreement should include a change control proce-
dure to change the service level agreement, when it is required. Similarly, Atkin and Brooks
(2015, 199) state that service specification or service description should not be regarded as a
fixed requirement. It should be considered a continual improvement process which change as
end-user needs change. Therefore, it requires to change the service level agreement and ser-
vice specification (Atkin & Brooks 2015, 199).
Edwards suggests that a contractor must have enough insurance to cover injuries to employ-
ees and should be accountable for any disruption caused by its works. It is important that In-
surance policy covers both property and contractor. In general, the insurance certificate
mentions, “Owner also covered”. Finally, a standard insurance certificate must be provided
to the facility manager (Edwards 2012, 143,144).
A very detailed description of the contracted work is essential to add into the contract, so
that it will become easier for parties to make a clear plan on, how to design the service and
how to achieve the service levels and service standards. Besides that, a price list for each
task is recommended to include in the contract. List of price and task should be written care-
21. 21
fully; in addition a clause could be used to cover additional service and price. The facility
manager should have the right to withhold the payment until work is completed and inspect-
ed (Edwards 2012, 143).
An effective contract should have the reaction requirement for a response to the work re-
quests. This section should indicate the maximum reaction time for routine work, after-hours
work and emergency work. A contractor should have the ability in the sense of labour and
equipment to respond the emergency, to ensure the property is supported for emergency
needs and unexpected service interruptions. Before signing the contract, it is necessary to
have a review of the contract by a legal counsel. Non-technical contract such as, cleaning,
janitorial service, and landscaping can be designed and negotiated by facility manager with a
review from the legal consultant (Edwards 2012 ,143, 144).
2.7 Service specification
A service specification is a part of the contract. In general, a service specification is a specific
written document that assesses the minimum service standards required by a client or cus-
tomer. Service specification should be prepared in well-defined terms together with custom-
er’s requirements. However, it should not stating requirements in a way that prevent the ser-
vice provider to practice the most effective and efficient approach in order to achieve the
customer satisfaction (Atkin & Brooks 2015, 133,134).
According to Backer (2013, 109) “A specification is an explicit series of written requirements
used to describe the level of service required in a detailed, yet clear and unambiguous, fash-
ion”. Atkin & Brooks (2015, 133) emphasis that service specification and service level agree-
ment are essential facility management tools regardless of whether a service is outsourced or
in-house. Both service specification and service level agreement provide guidance for the or-
ganization as well as for the service provider to focus on how services should be provided,
where, when and in what ways.
Wiggins (2010, 41) explains that “the specification should incorporate a management struc-
ture and chain of command with the client organization”. A specification should include the
performance measurement and review procedures .In that cause, if applicable, payment
should link with the performance improvement. However, a specification should be result ori-
ented; it should create a scope for the contractor to exercise effective and efficient methods
to achieve the result. The relationship of partnership should be developed on mutual benefits
(Wiggins 2010, 41).
22. 22
Section Contents
Part 1: Terminology
Part 2: Areas/items/services
Part 3: External standards
Part 4: Internal standards
Part 5:Categorization of areas
/items/Services
1.1 Definition of terms used
2.1 scope of areas/items/services covered
by specification.
3.1 Statutory requirements
3.2 International/national standards
3.3 Manufacturers’ recommendations
3.4 Industry –accepted best practice
4.1 Corporate/department requirements
4.2 Previously accepted standards
5.1 Detailed procedures for each category
5.2 Frequency of procedures for each cat-
egory.
Table 7 : The contents of the service specification (Atkin & Brooks 2015, 135)
Table 7 shows the typical format of a service specification. Drafting a service specification for
the first time is a time consuming task. For some organizations, trade unions provide the
guidance to their members and offer the model format of specification. However, it is rea-
sonable that any format may require some adaptation to suit the organizational goals and to
follow accepted practice. Moreover, advice and information from available source could be
used to form a service specification which maintains the internal and external standards of
the organization (Atkin & Brooks 2015, 135).
In general, there are two types of service specification, which are called, the prescriptive
specification and the performance specification. A prescriptive specification defines the level
of performance from top to bottom. Because of this, the outcome of the performance is
measurable. Because of this, prescriptive specification does not require an interpretation
(Barker 2013, 109, 110).
According to Barker (2013, 110, 111) both approaches are separated from each other. For in-
stance, the prescriptive specification laid down what shall be done, how and when. Since it
dictates the total working process, time, date and frequency, it makes easier to review the
performance. On the other hand, in performance-based approach, the service provider is
flexible to schedule the service based on the need and the demand, which is arisen by the
common uses, weather, special events, and access hours. Atkin & Brooks (2009, 106,107) sug-
gest that the performance-based specification is more likely to deliver the quality service
with a limited budget than the prescriptive specification. To put it another way, prescriptive
23. 23
specification by the definition is restrictive and difficult to make a change when the contract
is running.
3 Methodology
3.1 Qualitative research
According to Manson (2002, 3, 4) Qualitative research is “Based on methods of analysis, ex-
planation and argument building which involve understanding of complexity, detail and con-
text. Qualitative research aims to produce rounded and contextual understandings on basis of
rich, nuanced and detailed data. There is more emphasis on ‘holistic’ forms of analysis and
explanation in the sense, than on charting surface patterns, trends and correlations. Qualita-
tive research often does use some form of quantification, but statistical forms of analysis are
not seen as central”
Lapan, Quartaroli, Riemer (2012, 69) state that qualitative research can be carried out in dif-
ferent ways such as, case studies, interviewing the people have relevant experience and ob-
servation where researcher live, work or spent leisure time. One of the viewpoints of the
qualitative research is that reality is complicated and socially constructed. Therefore, Lapen
et el. (2012, 69) recommend that research design must be open to change during the investi-
gation.
Research topic itself is based on hypotheses, by considering certain facility management tools
and methods are important to implement an effective outsourcing process to obtain a quality
service. As a result, this task involves analysing and explaining the useful facility management
tools and methods. Therefore, researcher finds out that qualitative research is the applicable
approach to this research.
3.2 Research approach and strategy
In a qualitative research, a research commences from either a deductive or an inductive ap-
proach. If the research commenced by using a deductive approach, the researcher will seek
to use existing theory to shape the qualitative research process and aspect of data analysis. In
general, the deductive approach is considered for the scientific research. On the other hand,
the inductive approach is considered to gain understanding from the research process and
formulated the theory by collecting and analysing the data. As a result, the researchers gain a
wider understanding from the process to make a conclusion (Saunders, Lewis & Thornhill
2016, 168).
24. 24
As mentioned earlier, the aim of this research is to find out facility management tools and
methods to implement an effective outsourcing process to obtain a quality service. There-
fore, the researcher uses both deductive and inductive approach for this research. Lapen et
el (2012, 243) state that case study research is an investigative approach, which explore the
complex phenomena, such as recent event, programme in order to get a deeper understand-
ing of these phenomena. According to Yin (2003, 2) case study contributes uniquely to expand
our knowledge of, individual, social, organizational and political phenomena. Case study has
been a common research strategy in social work, business, psychology, political science.
As a research strategy, a single case study namely, Itis shopping centre was applied in this
qualitative research.
3.3 Data collection methods
For this research, Interview was chosen as a data collection method. Itis’s shopping centre
manager, maintenance manager, and cleaning and security manager were interviewed for
collecting the relevant data. Cleaning and security manager is responsible for the security
department, the inside cleaning department and the outside cleaning departments. Cleaning
and security manager was the representative on the behalf of Itis Shopping Centre for this
research project.
Beginning of this research project, a brainstorming session took place with the cleaning and
security manager as a development process to have a better understanding about the re-
search process and topic. Later on, a semi-structured face to face interview was conducted
with security and cleaning manager to collect the relevant data for answering the research
questions. The interview questions were developed precisely to make the interviewer flexible
to answer the questions more in-depth. At the same time, all three facility managers, name-
ly, Shopping Centre manager, Maintenance manager, and, cleaning and security manager
were interviewed with a close ending questionnaire. In order to receive more information,
the cleaning and security manager was interviewed for the second time via email.
3.4 Reliability and credibility
According to Saunders et el. (2007, 149,150) reliability and credibility of a research could be
improved by reducing the possibility of getting wrong answers. One of the threats to reliabil-
ity is participant errors, which may happen for different reasons. Therefore, beginning of this
research project, a brainstorming session took place with the representative of the case com-
pany to ensure that research topic, aim and questions are well-understood. Furthermore, in-
terview questions were handed out before the interview to make sure the response is error-
25. 25
free. At the same time, Interviewees were requested to ask the researcher if they do not un-
derstand the research questions.
According to the Flick (2002, 77) to focus on the interview topic, it is important to encourage
the participant to explain in more details. Interview questions were developed based on the
theoretical part to collect the relevant data from the interviewees. During the face to face
semi-structured interview, the interviewee was given enough time to support and explain the
questions in details. Interviewees were requested to ask the researcher, if the questions were
not clear to understand. In order to keep the research from being bias, the researcher rec-
orded the interview. Second semi-structured interview was conducted via email. As a result,
threat of the researcher bias was avoided.
Establishing the credibility was a crucial task to do the research project with the case compa-
ny. During the brainstorming session, the purpose of the research and data processing proce-
dure were explained to the representative of the case company. Later on, representative of
the case company signed the research permit. The research permit also defines how confi-
dentiality of the information and anonymity of the interviewees would be protected. Same
rules also followed for the semi-structured email interview. Interviewees were given the op-
tion to make inquiries regarding the research and interview questions. Confidentiality of the
information and anonymity of the interviewees were given priority to ensure the research
from being participant bias.
4 Results and analysis
4.1 The key drivers and challenges of outsourcing facility services
According to the ML, one of the key drivers for outsourcing the facility services is the business
strategy. ML emphasises that outsourcing has proven as a cost effective solution to provide
the wide scales of services in the shopping centre. Outsourcing also reduces the need of hav-
ing an in-house human resource department; as a consequence, it creates simplicity in the
organization. In ML’s own words-
“Outsourcing is proven to be most cost effective way of producing the wide scale of services
in shopping centre. Outsourcing personnel based services also reduces the need of in-house
human resources department” (ML)
Furthermore, ML states that outsourcing is not only cost efficient, but also an opportunity to
work with the outside expertise. Outsourcing service providers are specialist in their own
fields. As a result, they can provide better service in a cost effective way. In ML’s own words
26. 26
“these companies are professionals in their own field’s of business and they can provide the
best specialists for our use.” Meantime, ML points out that internal capacity is not sufficient
in the sense of specialist and expertise.
Similarly, all three facility managers were asked to choose the applicable drivers for out-
sourcing facility services. All of them choose business strategy and insufficient internal capac-
ity as the key drivers for outsourcing services.
The key drivers of outsourcing facility service in Itis are shown in Figure 10.
Figure 10: The Key drivers of outsourcing service in Itis
Figure 10 shows the key drivers of outsourcing services in Itis. Similar kind of result has shown
in the IFMA′s (International Facility Management Association) research report (IFMA 2006) on
outsourcing practices. It suggests that 94% facility managers choose outsourcing to reduce or
control costs, while 91% facility managers choose outsourcing is important to access special-
ized knowledge or specialized skills and 87% consider outsourcing is important for requiring
speciality skills. 487 facility managers and executives participated in the research survey (IF-
MA 2006, 16).
As mentioned earlier, outsourcing decision should not be made without identifying the risks
and opportunities related to the outsourcing. Therefore, all the three facility managers were
asked, whether the risks and opportunities surrounding the outsourcing decision have been
identified and their impact has been assessed. According to the interviewees, the risks and
opportunities surrounding the decision have been identified and their impact has been as-
sessed.
Key drivers of
outsourcing
Business
strategy
Concentrate
more on core
business
Cost efficency
utilizing outside
expertise
Insufficient
internal
capacity
Insufficient
internal
resources and
expertise
27. 27
Above all, outsourcing is not without the challenges. While answering the question of the ad-
vantages and challenges of outsourcing services, ML points out that employees of the out-
sourced company might not be as committed to the customer’s goals as own staff would be. It
is important that outsourced staff is well trained and they understand the customer’s needs
and commit to achieving them.
Similarly, IFMA′s research on outsourcing practices (IFMA 2006, 18) shows that 73% facility
managers concern about the loyalty or dedication of the outsourced FM provider’s employees
and management, while 69% facility managers concern that Outsourced FM providers would
not understand the organization’s culture or priorities. Because of this, all three facility man-
agers were asked, whether service providers are aware of the internal and external stand-
ards. External standards are statutory requirements, industry-accepted best practice. On the
other hand, internal standards are developed by the organization. Based on the interviewee′s
answers, outsourced service providers are aware of the internal and external standards.
4.2 Procurement process
According to the interviewees, Itis has developed a procurement policy and procedures to
ensure the procuring service meets the organizational needs. Stakeholders with an interest in
the services have been engaged and their needs as the end-users have been identified. The
risks and opportunities surrounding the outsourcing decision have been identified and their
impact has been assessed.
ML states that the procurement process starts with identifying needs. At the same time, it is
crucial to set the service level requirements. When the baseline for the outsourcing is estab-
lished, short listed service providers are invited to bid. The service providers present their
start-up plan and cost of doing the task. The negotiation takes place with the potential ser-
vice providers and, the contract and the service level agreement are the outcome of the ne-
gotiations. In ML’s own words-
“Process is to identify the needs and then set required service level. Needs and service level
requirements are then communicated to potential service companies and tendered. Contract
and service level agreement are outcome of negotiations where service provider presents
their detailed strategy to reach agreed service level and costs of doing it” (ML)
28. 28
4.2.1 Request for tender
According to ML, it is important to choose the right service provider who is stable and able to
reach the service standards for the organization. Meantime, it is an essential task to identify
the risk on choosing companies. In ML’s own words-
“Finding the right partner, we have to go with stable companies; we have to identify the risk
on choosing companies” (ML).
ML states that tendering is a time consuming matter. As a result, a request for tender is sent
to five or eight companies. ML mentions that normally the tender invitation sends to the well-
known, stable and big companies. However, a new company may ask to bid, which will be
taken into consideration.
4.2.2 Request for information
ML mentions that the prospective service providers are required to provide the certain docu-
mentation to demonstrate their stability. In ML’s own words- “even if the services are differ-
ent, it is standard legal documentation we use, that required the company to deliver certain
documentation of the stability of the company”.
ML explains that request for information is very important; it helps to identify the service
providers who do not have resources, finance and capacity to carry out the contract. During
the pre-tendering process, service providers are required to provide the certain information
to demonstrate their eligibility for the contract. If there is no available information, a re-
quest for information may issue to the service providers to know about the service company.
4.2.3 Tender assessment
According to the interviewees, tender assessment focuses on the quality, performance and
price. Furthermore, it is essential to assess the service providers’ strategies to achieve the
required service standards. ML emphasises that it is important to assess the service provider’s
strategy to get the service level cost effectively. In ML’s own words “we estimate that is it
realistic strategy? Can we work with this company? After negotiation you find cost effective
solution, you have to find solution that get to the service level, cost effectively as you can”.
Based on the interview, the researcher illustrates Itis procurement timeline below.
29. 29
Figure 11: Procurement timeline of Itis
Figure 11 shows the procurement timeline of Itis.
4.3 Contract and service level agreement
According to the interviewees, Itis has a competence to prepare the service level agreement
for outsourcing services. Contractual agreement allows Itis to review the performance of the
service providers. Most importantly, adequate controls are in place to deal with the changes
to the service specification and the service level agreement within a short-period of time. In
addition, the service level agreements include an annual review and break clauses which will
enable Itis to terminate the service providers in case of poor performance.
Cordall (2016) an IT, intellectual property and commercial lawyer recommends that a client
organization should not let the service providers to draft the service level agreements. It is
important for an organization to go over the process of deciding what services should be pro-
vided, how services should be provided, where and to whom. Cordall (2016) also suggests that
the service level agreements should include a termination clause to terminate the agreement
for the material breach if the service levels have not been achieved. Cordall′s recommenda-
tions were supported by the case company. As mentioned earlier, Itis has competence to pre-
pare the service level agreements and adequate controls are in place to change the service
level agreements and service specification, when it is required.
ML emphasises the importance of the written service level agreement together with the ser-
vice specification, which is important to maintain the quality service. Beside that the service
• Price
• Quality
• Performance
• Negotiation
• Service level
agreement
• Contract
• Request for
information
• Risk assessment
• Need
identification
• Service
requirements
• Risk and
opportunity
assessment
Decision to
outsource
Request for
tender
Tender
assessment
Contract
sign off
30. 30
level agreements should include the quality expectations of the service, the measurement
criteria, the details working hours, and the responsibility of each party and the plan for fu-
ture development (ML)
Barker (2013, 289) similarly states that the service level agreement is important for both cli-
ent and service providers. Typically the service level agreements include, details of service,
service standards, level of quality required, time table of the service delivery, provisions of
legal compliance, responsibilities of each party, payment terms and possible compensation
arrangements, performance monitoring , termination conditions by both parties.
4.4 Service specification
As mentioned earlier, a service specification is a written document which includes the de-
scription of the service together with the customer’s requirements. It is important for the
service provider to know what kinds of service they are going to provide and what are the
customers' expectation regarding the service.
According interviewees, Itis has competence to prepare the service specification. There is
adequate control in place to deal with changes to the service specification. According to ML,
Service specification was developed by identifying the needs. ML explains that “it all start
from identifying needs .Two most important things is identify the need than you set the ser-
vice level ”
ML explains that Service specification includes the detailed descriptions of what is being pro-
vided. It clarifies the tasks and responsibility of each service provider, time frame, and quali-
ty expectation of the service. ML emphasises that constant development and communication
is required to support it. According to the interviewees, stakeholders with an interest in the
service have been engaged properly and their needs as end-users have been defined.
Similarly, Theriault (2007) points out that implementing an outsourcing contract without de-
fining the service level is risky. An organization may receive less than expected or more than
necessary. It’s also harder to determine, whether the organization is getting what is paid for.
Nor does the service provider have clear service targets and objectives. It will create the gap
of required service level that business needs to be successes. At the same time, without iden-
tifying the stakeholders’ needs (client and customers), it will be difficult to fulfil the stake-
holders’ needs. Either it will be less than enough or more than enough.
31. 31
4.5 Performance monitoring
According to the interviewees, all service providers’ performance has been reviewed periodi-
cally. Performance reviews focus on end-users, operations, finances, human resources and
regulatory compliance. However, the performance monitoring procedure differs from service
to service. On a daily basis, a duty manager is responsible to make an observation including
performance of the service providers along with other managerial works. ML points out that
body-storming or physically observing is suitable to monitor the performance of outsourcing
services, in some cases; it can be done by reviewing the statistics and reports. In general,
weekly and monthly meeting take place with the service providers to review the perfor-
mance. In ML’s own words
“In Itis we use several procedures in different services and all outsourced services have their
own quality control systems. Most common is weekly or monthly meetings with service super-
visors to review how set goals are being reached. This can be done in form of body storming
or in some cases (such as technical maintenance) by going through statistics and reports”
Above all, client and customer play a key role in Itis to provide feedbacks on the quality of
facility services. In addition, the third party’s evaluation also suggests that whether set ser-
vice levels are being reached or not. At the same time, service providers are being communi-
cated based on the assessment. In ML’s own word- “One quality controller is also customer
(tenant/consumer) feedback that is being communicated to service providers. Larger custom-
er surveys (tenant/customer) and third party evaluations show if services are reaching the set
levels”.
According to Barker (2013, 116) states that it is essential to review the performance of the
service providers. It helps and organization to evaluate how service standards are being
reached. Aktin & Brooks (2009, 114 ) state that there are a number of ways to evaluate the
performance such as, collecting job reports from the service providers or worksheets, cus-
tomer feedbacks, customer complaints and customer survey. After collecting all data, an or-
ganization can evaluate the overall performance of a service provider.
Based on the interview, researcher illustrates the performance assessment procedure in Itis.
32. 32
Figure 12: Performance monitoring system in Itis
Figure 12 shows that Itis has developed a performance monitoring system to ensure service
level agreements and service standards are being achieved.
Similarly, the social welfare department of Hong Kong has developed a service performance
monitoring system. It has been developed to ensure that the service providers are responsible
for providing quality service, accountable for their actions and committed to improving the
service quality in response to a change in the end user’s needs . It includes different assess-
ment methods such as, annual reporting on service requirements and service quality stand-
ards, self-reporting by service providers, surprise visit, on-site assessment, User’s satisfaction
survey and feedback from the users (Welfare Department of Hong Kong 2012).
4.6 Health and safety in Itis
According to the interviewees, Itis’s health, safety and security policy statement is accessible
to all service providers and occupants. The service providers are aware of the internal and
external standards and compliant with health, safety, security and environmental regulations.
Besides that, monthly review covers the compliance of the service provider. According to the
Centre for Occupational Safety (2013, 8, 9) a client organization prepares the guidance on
Duty manager
•Types:Observation,
daily report
•Purpose: To assess the
daily performance of
the service providers
•Action: Communicate
with the service
providers if needed
Weekly/monthly
review
• Types: Reviewing the
performance with the
service supervisors
•Purpose: To assess how
set goals are being
reached
•Action: Review,
implemention
Survey
•Types: Customer and
tenant survey, third
party evaluation
•Purpose:To assess
how set goals are
being reached
•Action:Review,
Implemention,
communicate with
the service providers
if needed
33. 33
work, mobility and significant of dangers in the property. On the other hand, Supplier or ser-
vice providers are responsible for the employees’ qualification, safety orientation, safety
guidance to perform the job, and, to provide the information regarding the work place.
4.7 Quality system in Itis
Based on the interviews results, Itis has developed a systematic process to manage the quality
of outsourcing services. In order to understand how quality is obtained by the exiting tools
and methods, Bakers (2013, 72) four components of a quality service was applied here. As
above mentioned earlier, Baker states that quality in term of service consists of four compo-
nents, which are excellence, compliance, intelligence and reviews. Figure 13 shows below
how the quality system works in the Itis as far as outsourcing is concerned.
Figure 13: How quality is obtained by the existing tools and methods in Itis
Figure 13 shows that how a quality service is obtained by the existing facility management
tools and methods. As above mentioned earlier, Baker (2013, 72) states that excellence is all
about making a precise requirement of the service together with service standards. According
to the interviewees, Itis has developed the service specification for each outsourcing services.
It includes the required service standards, service provider’s regulatory obligations and per-
formance measurement procedures. This research suggests that facility managers have been
working closely with the service providers to make sure the required service levels are being
reached; safety and security rules are being followed. As above mentioned earlier, Itis has
different performance measurement procedure. It helps the management team to review the
performance of the service providers and to take decision based on it. The interviews results
34. 34
suggest that Itis is using existing tools and methods effectively to ensure the quality of out-
sourcing services.
However, ML was asked to tell about the Itis’s quality control procedure. According to Kemp
(2006, 94) quality control is a set of methods developed to ensure that output and process
meet the requirements. In constraint, Itis has developed a quality control procedure to en-
sure the performed service meet the service requirements or service standards.
ML emphasises that it is important to set up the services in order to reach the set quality lev-
el effectively. ML states that a quality control procedure varies service to service. In general,
monthly or weekly meeting takes place with the service providers to review how set goals are
being achieved. On a regular basis, managers make an observation in form of body storming
to ensure that required service levels are being achieved. For some services such as technical
maintenance, quality control procedure is to review the reports or statistics.
In ML’s own words ““In Itis we use several procedure in different services and all outsourced
services have their own quality control systems. Most common is weekly or monthly meetings
with service supervisor to review how set goals are being reached. This can be done in form
of body storming or in some cases (such as technical maintenance) by going through statistics
and reports”.
Figure 14: Quality control system in Itis
Quality
control
Process
Monitoring &
Controlling
How
Observation
statistical sampling
Reports
Internal and external
customer's feedback
and survey
When
Weekly, monthly and
yearly
Purpose
To review service
& performace
Why
To check if the service
requirements are
being reached
35. 35
Figure 14 shows that Itis’s quality control system. It suggests that customers are given top
priority from the outsourcing decision and to obtain a quality service from the service provid-
ers. As mentioned earlier, ML states that the tenant and the customers’ feedback and survey
are important to observe whether set service levels are being reached or not.
5 Discussion
This research project was conducted to find out the existing tools and methods the case com-
pany is using to implement an effective outsourcing process to obtain a quality service. In
order to answer the research questions, researcher used interview as a data collection meth-
od. Theoretical framework focused on defining facility management tools and methods, which
are important to implement an effective outsourcing process to obtain a quality service.
Three facility managers of the case company, namely, maintenance, cleaning and security,
and shopping centre manager were interviewed for this research. Interview questions were
designed based on the theoretical framework. However, interviewees were given a chance to
explain in details to get relevant information. All the relevant data and information from the
interviews were collected and presented according to the theme developed from the theoret-
ical framework.
The research result suggests that the Case Company has developed a systematic approach
with the following tools and methods, which are shown in Figure 15.
Figure 15: Tools and methods the case company is using to implement an effective outsourc-
ing process to obtain a quality service.
Pre-tendering
•Needs assesstment
•Risks and opportunitites assessment
•Defining service requirements (Service specification)
•Choosing outsourcing procedure
Tendering
• Inventation to tender
• Tender evaluation
• Negotiation
• Formalizing contract and service level agreement
Post-award
• Contract management
• Peformance monitoring
36. 36
Figure 15 shows that the Case Company is using the tools and methods in three different cat-
egories. At the pre-tendering stages, the case company is using the following tools and meth-
ods, needs assessment, risks and opportunity assessment, developing the service specifica-
tion. During the tending, the Case Company takes the following procedure such as, indenta-
tion to tender, tender assessment, negotiation, formalizing contract and service level agree-
ment. At the post-award stage, the case company monitors the performance based on the
service level agreement and the service specification. The research suggests that the Case
Company is using facility management tools and methods effectively to implement an effec-
tive outsourcing process to obtain a quality service and quality is obtained by these tools and
methods.
Outsourcing plays a significant role in the case company. To support the core business, the
case company has outsourced approximately 50 services in the property. It suggests that out-
sourcing has a significant role in the case company.
Business strategy and insufficient internal capacity were considered as the main drivers of
outsourcing services. The decision for outsourcing was made based on the assessments, which
assess the risks and opportunities related to the outsourcing services. As mentioned above,
many experts consider outsourcing as a cheaper, faster and better. In addition, it is an oppor-
tunity for the case company to use the outside expertise’s who are expert in their own field.
Outsourcing companies are specialized in specific services, it helps the service provider to
provide a cost effective solution for the client. It also transfers the liabilities in the sense of
labour and equipment. Outsourcing service providers take the responsibilities to deliver the
service effectively and efficiently. Therefore, administrative team can concentrate more on
the core activities.
To choose the right service provider for the right service, it is important to develop a pro-
curement process and procedure. The Case Company has developed a procurement policy and
procedure. Beside that it has competence to prepare the service level agreement and the
service specification. The procurement process starts with inviting the prospective service
providers. This stage is considered to be crucial for the outsourcing services. The prospective
service providers should be assessed properly to find out the right service provider for the
future negotiation. For the case company, it has developed an (RFI) request for information
which has been issued to the prospect service providers.
Request for information is useful to get relevant information about the service providers. It
also helps a company to evaluate the service provider with a range of categories. However, a
request for information may differ from company to company, service to service. An organi-
37. 37
zation can develop request for information based on its needs and requirements of the ser-
vices.
In addition, the case company conducts a risk assessment before issuing a request for tender
to the potential service providers. As mentioned earlier, Booty and Taylor (2009, 260) men-
tion that private organization may not prepare to publish their tender announcement public-
ly, in that case, company’s tender invitation send to the short listed candidate who is already
known to the company.
The Case Company sends the invitation to tender request to 5 to 8 companies. To manage the
quality of outsourcing services, it is also important to evaluate the tender proposal .The case
company evaluates the tender proposal in terms of quality, performance and price.
The Service specification is considered as an essential tool. A service specification is a writ-
ten description of the service. It defines the scope of the service, what are the client’s re-
quirements regarding the services, what are the service standards and how the performance
will be monitored? It helps the service provider to design the service in an effective and effi-
cient way. On the other hand, it helps the case company to assess the performance against
the service specification.
The needs of the stakeholders may change over the time. Therefore, it is important to have
adequate controls with the changes of service specification within a short period of time. It
helps an organization to develop, modify the service when it is needed. The Case Company
has prepared the service specification as a part of a request for proposal or tenders. It also
helps the prospective service provider to prepare their start-up plan, including the service
design, cost structure, equipment and the human resources.
The contract is another essential tool. It establishes the relationship between an organization
and a service provider. It is important to have a written contract. The Service level agree-
ment is one of the most important parts of the contract. It defines the responsibilities of each
party, such as service specification, term of the contract, insurance, reaction time require-
ment, payment and fees, and cancellation. A service level agreement can be reached by the
negotiation. However, for some service level agreements, it is essential to get a review from
the legal experts.
For the case company, the relationship with the service providers is based on the contractual
agreement. It defines the responsibilities of the service providers, the service standards, the
performance measurement procedures, and how sanction will apply if the agreed service lev-
els are not achieved. Most importantly, adequate control in place to deal with the changes to
38. 38
the service level agreement within a short-period of time and contracts include an annual
review and break clauses. It will help the case company to remove the poor performer, to
bring a change in service level agreement and service specification, all of these elements are
essential to develop the service, to fulfil the stakeholders’ demand and to keep the property
in a profitable condition. In addition; some contracts are reviewed by the legal consultant.
After establishing a contractual relationship with the service provider, it is important to mon-
itor the performance. Monitoring process may differ company to company, service to service.
The purpose of the performance monitoring system is to measure the performance of the ser-
vice providers based on the service level agreement and the service specification. It also
helps an organization to detect under performance earlier. The Case Company monitors the
performance of the service providers in several ways to ensure that required service levels
and service requirements are being reached. The purpose of the performance monitoring sys-
tem is to ensure the quality of the outsourced services as well as to make the service provid-
ers accountable and responsible for their actions in the property.
6 Recommendation and conclusion
6.1 Recommendation
This research suggests that the Case Company has implemented an effective outsourcing pro-
cess by the existing tools and methods to obtain a quality service. These finds are the
strength of the Itis facility management.
For the purpose of future innovation and development, The Case Company has an opportunity
to benchmark the post-awarding tools and methods such as the service level agreement, the
service specification and the performance monitoring to get the innovative concept and ideas
from the other organizations. For benchmarking, available online resource can be utilized.
According to Wiggins (2010, 508), Benchmarking is the process of continuously measuring and
comparing a business process with the other organizations or departments to obtain infor-
mation, which is relevant and helpful for the organization to identify and implement im-
provement. Benchmarking is a systematic process for evaluating the product, service and the
process of the organization.
Wiggins (2010, 509), suggests that the advantages of external benchmarking are numerous
such as, discovering useful, innovative practices, building the professional network and get-
ting relevant data for the future development . Particularly, for the facility management pro-
fessional, Wiggins (2010, 509), states that the service level agreements and the performance
39. 39
monitoring system should be part of the benchmarking toolkit to demonstrate, how its added
value to the core business.
6.2 Conclusion
This research project was conducted to find out the facility management tools and methods
the case company is using to implement an effective outsourcing process to obtain a quality
service. One of the difficult tasks of outsourcing is to obtain a quality service. This research
suggests that it is important to implement an effective outsourcing process to obtain a quality
service.
As mentioned earlier, International Facility Management Association research on outsourcing
practices (IFMA 2006, 19) shows that 78% facility executives state that getting the right ser-
vice levels is challenging, when it comes to outsourcing services. This statistic suggests that
the gap between the goal of outsourcing and implementation.
By commenting on this statistic, Theriault (2007) states that the most likely reasons are in-
cluding, poorly defined service levels, a performance issue with the service provider or inef-
fective management of the outsourced relationship. Theriault suggests that regardless of the
root cause, tackling the service level challenge involves three key steps, including defining
service levels, implementing performance management and an effective contract manage-
ment. In general, these three elements will be in place before outsourcing begins. However,
it could be implemented with the current service providers, incorporated into the next re-
newal or re-tender (Theriault 2007).
Similarly, this research suggests that during the contractual relationship with the service pro-
viders, the service specification, the service level agreement, the contract, the performance
monitoring systems are most important tools and methods to obtain a quality service. This
research also suggests that the service level agreement, the service specification should be
opened for the future development of the services, and need to be changed when it requires.
These findings can be used for decision making and strategic thinking to develop and re-
develop the facility management practices related to outsourcing. This research suggests the
effectiveness of these tools and methods. By these tools and methods, the case company has
implemented an effective outsourcing process successfully to obtain a quality service.
However, the research still has few limitations. The interview samples were relatively small.
These limitations have remarkably overcome by interviewing 3 different facility managers,
40. 40
who are responsible for the major outsourced departments. However, a much larger amount
of interviews would possibly reveal interesting findings to widen the scope of the research.
41. 41
References
Alexander, K. 1996. Facility Management: theory and practice. London: E&FN Spon.
Ashley, E. 2008. Outsourcing for dummies. New Jersey: Wiley Publishing.
Atkin, B & Brooks, A. 2009. Total Facilities Management. Third edition. West Sussex: Black-
well.
Atkin, B & Brooks, A. 2015. Total Facilities Management. Fourth edition. West Sussex: Black-
well.
Barker, I. 2013. A Practical Guide to facility management. Caithness: Whittles Publishing.
Barrett, P & Finch, E. 2014. Facility Management: the dynamics of excellence. Third edition.
West Sussex: John Wiley & Sons, Ltd.
Benyon, R. & Johnston, R. 2006. Service agreements-A Management Guide. Zaltbommel: Van
Haren Pub.
Booty, F. 2009. Facilities Management Hand Book. Fourth edition. Linacre House: Elsevier Ltd.
Cordall, G. City University London 2016. Accessed 14th
November 2016.
(https://www.city.ac.uk/__data/assets/pdf_file/0007/133936/Service-Level-
Agreements.pdf).
Cullen, S. 2009. Service level agreement: The outsourcing Toolset. Sample from out-
sourcingtoolset.com. Accessed on 23rd
November 2016.
(http://www.outsourcingtoolset.com/index.php?page=shop.product_details&flypage=flypage.
tpl&product_id=23&category_id=12&option=com_virtuemart&Itemid=58).
Edwards, J. 2012. Applied Facility Management. USA: University Readers Inc.
Finnish council for shopping centers 2016. Accessed on 14th
November 2016.
(http://www.kauppakeskusyhdistys.fi/attachements/2016-03-22T08-50-1848.pdf)
Flick, U. 2002. An introduction to Qualitative Research. London: SAGE Publication Ltd.
Google Map 2016. Accessed on 14th
November 2016.
(https://www.google.fi/maps/place/Itis)
Itis 2016. Accessed 14th
November 2016.
(www.itis.fi )
IFMA. 2006. An Inside Look at FM Outsourcing Research Report 27. USA
Kemp, S. 2006. Quality management demystified. New York: McGraw Hill.
Lapen, S. Quartaroli, M. & Riemer, F. 2012. Qualitative Research: an Introduction to Methods
and Designs. An Francisco: Jossey-Bass.
Manson, J. 2002. Qualitative Researching. Second edition. London: SAGE Publications.
Power, M. Desouza, K. and Bonifazi, C. 2006. The Outsourcing Handbook: How to implement a
successful outsourcing Process. London: Kogan Page.
Patel, A. & Aran, H. 2005. Outsourcing success-The management imperative. Basingstoke :
Palgrave Macmillan.
42. 42
Pine, M. 2016. Why do companies outsource? Accessed on 12 November 2016.
(https://www.thebalance.com/why-do-companies-outsource-2553035 )
Rondeau, E. Brown, R. & Lapides, P. 2006. Facility Management. Second edition. New Jersey:
John Wiley & Sons, Inc.
Saunders, M. Lewis, P. Thornhill, A. 2007. Research Methods for Business Students. Fourth
Edition. Essex: Pearson Education Limited.
Saunders, M. Lewis, P. Thornhill, A. 2016. Research Methods for Business Students. Sevent
Edition. Essex: Pearson Education Limited.
Schniederjans, M. Schniederjans, A. Schniederjans, D. 2005. Outsourcing and Insourcing in an
International Context. New York: M.E. Sharpe.
Theriault, M. 2007. Outsourcing: Serving up Quality. Accessed on 14th
November 2016.
(http://www.facilitiesnet.com/equipmentrentaltools/article/Outsourcing-Serving-Up-Quality-
Facilities-Management-Equipment-Rental-Tools-Feature--6651)
The center for occupational safety. 2013. Occupational safety card-occupational safety in the
shared workplace. Turku
Wiggins, J. 2010. Facilities Manager’s Desk Reference. West Sussex: Blackwell.
Welfare Department of Hong Kong. 2012. Service performance monitoring system
(http://www.swd.gov.hk/doc/ngo/Manual/Performance%20Assessment%20Manual-
September%202012-Eng.pdf )
Yan, R. 2003. Case study research. Second edition. Thousand Oaks: SAGE Publications.
43. 43
Figures
Figure 1: Itis shopping centre on Google Map (Google 2016). .....................................6
Figure 2: The Key outsourcing facility and supporting service in Itis.............................8
Figure 3: Four components of a quality service (Barker 2013, 72, 73). ........................ 11
Figure 4: Quality assurance (Wiggins 2010, 504) ................................................... 12
Figure 5: Outsourcing FM models (Wiggins 2010, 40).............................................. 13
Figure 6: Relationship between in-house and outsourced operations (Wiggins 2010, 39) .. 13
Figure 7: The procurement process (Atkin & Brooks 2015, 123) ................................ 16
Figure 8: The procurement timeline (Atkin & Brooks 2015, 124). .............................. 18
Figure 9: Key governing documents of contract (Cullen 2009, 14).............................. 19
Figure 10: The Key drivers of outsourcing service in Itis ......................................... 26
Figure 11: Procurement timeline of Itis ............................................................. 29
Figure 12: Performance monitoring system in Itis ................................................. 32
Figure 13: How quality is obtained by the existing tools and methods in Itis................. 33
Figure 14: Quality control system in Itis ............................................................. 34
Figure 15: Tools and methods the case company is using to implement an effective
outsourcing process to obtain a quality service. ................................................... 35
44. 44
Tables
Table 1: Company Profile-Kauppakeskus Itäkeskus oy (itis 2016).................................7
Table 2: Typical facility management activities (Barrett and Finch 2014, 9)................. 10
Table 3: Key drivers of outsourcing facility service (Edwards 2012, 141) ..................... 14
Table 4: The challenges of outsourcing (Edwards 2012, 142).................................... 15
Table 5 : Essential areas of the procurement policies (Atkin & Brooks 2015, 124, 125) .... 19
Table 6: Elements of service level agreement (Barker 2013, 290).............................. 20
Table 7 : The contents of the service specification (Atkin & Brooks 2015, 135) ............. 22
45. 45
Appendix
Appendix
Appendix 1: Face to face semi structured interview questions. ................................ 46
Appendix 2: Interview questionnaire................................................................. 47
Appendix 3: Email Interview questions .............................................................. 51
46. 46
Appendix 1
Appendix 1: Face to face semi structured interview questions.
Interviewee /Job title: Cleaning and security Manager of Itis
Date: 19/07/16
1. Would you like to tell about your background?
1.1 How long you have been working with Itis?
2. How do you describe Itis?
3. How do you describe Itis from hygiene and safety points of view?
4. What is the vision of Itis?
5. What kinds of values do you have as a largest shopping centre in Finland?
6. What kinds of services do you outsource in this property?
8. What are the reasons to outsource facility services in the first place?
9. Would like to tell the procurement procedure that has been used to procure the facility
services in this property?
10. Would you like to tell the principles and objectives of Itis procurement procedure?
11. What kinds of competitive advantages and disadvantages a shopping centre can have from
outsourcing facility services?
12. What kinds of advantages and disadvantages do you face while outsourcing facility ser-
vices?
13. How do you define quality service?
14. Would you like to tell the quality control procedure that has been used to maintain quali-
ty services in this property?
15. How do you describe Itis service level agreement? Does it help to maintain a quality ser-
vice?
16. How do you describe Itis Service specification from “SMART” point of view?
47. 47
Appendix 2
Appendix 2: Interview questionnaire
Respondent’s details, shopping centre manager, maintenance manager and, cleaning and se-
curity manager. Responds received on 10/10/2016 to 12/10/2016.
Part 1: Facility Management (Atkin & Brooks, 2015)
1. Does facility management have a significant role in the organization?
A. Yes
B. No
C. Not applicable, please comment
2. Is the role of stakeholders in facility management fully recognized?
A. Yes
B. No
C. Not applicable, please comment
3. Please choose applicable drivers for outsourcing facility services?
A. Reducing the operation cost B. Regulatory, legal and environmental issue
C. Business strategy D. Internal capacity is not sufficient
E. In-house department underutilization
Part 2: Procurement (Atkin & Brooks, 2015)
1. Has sufficient base information been gathered and synthesized prior to exploring the deci-
sion on whether or not to outsource?
A. Yes
B. No
C. Not applicable, please comment
2. Have all stakeholders with an interest in the services to be provided been properly engaged
and their needs as end-users been defined?
A. Yes
B. No
C. Not applicable, please comment
3. Have the risks and opportunities surrounding the decision on whether or not to outsource
been identified and has their impact been assessed?
A. Yes
B. No
48. 48
Appendix 2
C. Not applicable, please comment
4. Does a process exit for the purpose of procuring facility-related services?
A. Yes
B. No
C. Not applicable, please comment
5. Has the organization developed a procurement policy and procedure to ensure the procur-
ing service meet the organizational needs?
A. Yes
B. No
C. Not applicable, please comment
6. Does the tender assessment focus in objective terms on quality, performance as well as
price?
A. Yes
B. No
C. Not applicable, please comment
7. Have a request for the information (RFI) been prepared and issued to prospective service
providers?
A. Yes
B. No
C. Not applicable, please comment
8. Have the scope of services, service specifications and service level agreements been pre-
pared as part of a request for proposals or tenders?
A. Yes
B. No
C. Not applicable, please comment
Part 3: Working with the service providers (Atkin & Brooks, 2015)
1. Have service providers, where appointed provided details of their plans for start-up includ-
ing key resources?
A. Yes
B. No
C. Not applicable, please comment
2. Is the organizational health, safety and security policy statement easily accessible to all
service providers and other occupants?
A. Yes
B. No
C. Not applicable, please comment
49. 49
Appendix 2
3. Are service providers compliant with HSSE (Health, Safety, Security and Environment) regu-
lations?
A. Yes
B. No
C. Not applicable, please comment
4. Are the service providers aware of internal standards and external standards?
A. Yes
B. No
C. Not applicable, please comment
5. Are arrangements in place to enable continuing assessment of the performance of service
providers against service specification and service level agreement?
A. Yes
B. No
C. Not applicable, please comment
6. Are adequate controls in place to deal with changes to the service specification and service
level agreement within a short-period of time?
A. Yes
B. No
C. Not applicable, please comment
7. Do contracts run for not less than three years, with annual reviews and break clauses to
enable poor performers to be removed?
A. Yes
B. No
C. Not applicable, please comment
8. Does the organization have the competence to prepare service specifications and service
level agreement for outsourcing services?
A. Yes
B. No
C. Not applicable, please comment
9. Is the performance of service providers reviewed periodically?
A. Yes
B. No
C. Not applicable, please comment
50. 50
Appendix 2
10. Do service reviews cover end-users, operations, finances, human resources and regulatory
compliance as a minimum?
A. Yes
B. No
C. Not applicable, please comment
11. Do contractual agreements establish a relationship between organization and service pro-
vider to ensure that organization can have the right to audit the service provider’s process,
document and data?
A. Yes
B. No
C. Not applicable, please comment
12. Do contractual agreements ensure the involvement of the people from all level including
contractor’s worker to run the organization effectively and efficiently?
A. Yes
B. No
C. Not applicable, please comment
51. 51
Appendix 3
Appendix 3: Email Interview questions
Types: Semi-structured interview via email
Job title: Cleaning and security Manager Department (If applicable):
Date:
1. Would you like to tell about your background?
2. As per as outsourcing concerns, what are the essential elements of service level agreement
and why?
3. Why it is important to develop a service specification? How does it help to manage the
quality of outsourcing services?
4. Why it is important to monitor the performance of the service provider? What are the pos-
sible ways to measures the performance of service provider?
5. How essential it is to develop procurement process and policies in order to procure the fa-
cility service successfully?
6. Why it is important to prepare RFI (Request for information) and RFP (Request for pro-
posal)? How does it help to choose the right service provider?