The ultrasonic distance alarm system based on msp430 f449
•Download as DOC, PDF•
0 likes•159 views
The document describes an ultrasonic distance alarm system designed using a Texas Instruments MSP430F449 microcontroller and TCT40-16F ultrasonic sensor. The system uses the MJ echo capture method to accurately measure distances in real-time and display them on an LCD screen. It also sounds an alarm when distances are less than a set value. The system improves accuracy by using a temperature sensor for temperature compensation. Experimental results demonstrated the system's high accuracy for distance measuring tasks in vehicles.
Report
Share
Report
Share
Recommended
© 2017 AJAST All rights reserved. www.ajast.net Page | 17 Fire Accident Avoid...
© 2017 AJAST All rights reserved. www.ajast.net Page | 17 Fire Accident Avoid...Associate Professor in VSB Coimbatore
Fire accidents are very dangerous and cause harm to human life and property. If these types of accidents occur in some public transport, then it’s a matter of concern. In the recent times we have seen a lot of accidents occurring in trains, and a major part of it is due to fire accidents in the compartments. This fire is not confined to just one compartment. In case the train is moving then there are chances of the fire spreading to other compartments too. To avoid such incidents, there are different methods that are in use. Most of the present day systems use detectors in the compartments to detect any fire accidents. In case of any such occurrences, the information is passed on to the driver, so that he can take necessary decision. Hence we propose a system wherein we incorporate wireless sensors and WPAN to carry out similar operations. We have also designed some extra features which cater to the safety of the passengers. At the end we are sure to get a more reliable system which also has advanced safety features incorporated in it.Manual expt
This document contains information about three experiments involving microcontrollers:
1. Designing and developing a microcontroller-based harmonium to generate tones corresponding to different musical notes by producing specific frequencies.
2. Measuring the speed of sound using an ultrasonic sensor and microcontroller board by calculating speed from measured distance and time.
3. Measuring distance from an object using an ultrasonic sensor and microcontroller board by triggering the sensor and calculating distance from the measured time.
embedded systems
This document describes an embedded system to automatically control the speed of two-wheelers when entering speed restricted zones. The system uses a transmitter unit fixed in schools and colleges that continuously transmits a signal. A receiver unit on the vehicle detects the signal and a microcontroller compares the vehicle's speed. If speed is too high, it controls the spark plug or carburetor to reduce speed. The goal is to reduce accidents from overspeeding in sensitive areas through affordable automated enforcement.
Remote control system of high efficiency and intelligent street lighting usin...
The document proposes a remote-control system for intelligent and efficient street lighting using a ZigBee network of wireless devices and sensors. It allows for optimized management of street lamps through an advanced interface and control architecture provided by ZigBee devices. Sensors monitor and control system parameters, transmitting data via ZigBee transmitters and receivers to a control terminal where the state of streetlamps can be checked and failures addressed.
A wireless electrocardiogram detection for personal health monitoring
The document describes a low-power system for wireless electrocardiogram (ECG) detection in personal health monitoring. The system includes three subsystems: 1) an ECG acquisition node with a preamplifier, low-pass filter, and analog-to-digital converter to detect ECG signals, 2) a ZigBee protocol for wireless communication, and 3) radio frequency transmitter circuits including a power amplifier and mixer to transmit the ECG signals wirelessly. The system has been implemented in a wireless bio-signal acquisition system-on-chip using a 0.18-micron CMOS process, and testing on the human body showed it can effectively acquire ECG signals.
Real time implementation of the vertex component analysis algorithm on gp us
The document presents a new parallel implementation of the vertex component analysis (VCA) algorithm for spectral unmixing of remotely sensed hyperspectral data using commodity graphics processing units (GPUs). The authors developed a C serial version of the VCA algorithm and three parallel GPU versions using CUDA, CUBLAS, and CULA. Experimental results on hyperspectral images show the GPU implementations satisfy real-time constraints given acquisition rates.
Covering points of interest with mobile sensors
Sensors need to autonomously deploy to cover points of interest while maintaining connectivity to a base station. This paper proposes an algorithm where each sensor moves toward a point of interest but also maintains connectivity with neighboring sensors that are part of a relative neighborhood graph, minimizing connectivity sensors and maximizing monitoring sensors. Analysis, simulations, and implementation show the efficiency of the algorithm in optimizing sensor deployment over points of interest with connectivity constraints.
Deducción empírica
Juan conoce a su nuevo vecino Miguel, quien le dice que es profesor de Deducción Empírica. Miguel le explica que esto significa deducir información sobre alguien basada en evidencia observable, como deducir que Juan tiene un perro y una familia porque tiene una casita para perros. Más tarde, Juan le cuenta a su otro vecino José sobre Miguel y su profesión, y usa el mismo método deductivo con José, aunque llega a una conclusión incorrecta.
Recommended
© 2017 AJAST All rights reserved. www.ajast.net Page | 17 Fire Accident Avoid...
© 2017 AJAST All rights reserved. www.ajast.net Page | 17 Fire Accident Avoid...Associate Professor in VSB Coimbatore
Fire accidents are very dangerous and cause harm to human life and property. If these types of accidents occur in some public transport, then it’s a matter of concern. In the recent times we have seen a lot of accidents occurring in trains, and a major part of it is due to fire accidents in the compartments. This fire is not confined to just one compartment. In case the train is moving then there are chances of the fire spreading to other compartments too. To avoid such incidents, there are different methods that are in use. Most of the present day systems use detectors in the compartments to detect any fire accidents. In case of any such occurrences, the information is passed on to the driver, so that he can take necessary decision. Hence we propose a system wherein we incorporate wireless sensors and WPAN to carry out similar operations. We have also designed some extra features which cater to the safety of the passengers. At the end we are sure to get a more reliable system which also has advanced safety features incorporated in it.Manual expt
This document contains information about three experiments involving microcontrollers:
1. Designing and developing a microcontroller-based harmonium to generate tones corresponding to different musical notes by producing specific frequencies.
2. Measuring the speed of sound using an ultrasonic sensor and microcontroller board by calculating speed from measured distance and time.
3. Measuring distance from an object using an ultrasonic sensor and microcontroller board by triggering the sensor and calculating distance from the measured time.
embedded systems
This document describes an embedded system to automatically control the speed of two-wheelers when entering speed restricted zones. The system uses a transmitter unit fixed in schools and colleges that continuously transmits a signal. A receiver unit on the vehicle detects the signal and a microcontroller compares the vehicle's speed. If speed is too high, it controls the spark plug or carburetor to reduce speed. The goal is to reduce accidents from overspeeding in sensitive areas through affordable automated enforcement.
Remote control system of high efficiency and intelligent street lighting usin...
The document proposes a remote-control system for intelligent and efficient street lighting using a ZigBee network of wireless devices and sensors. It allows for optimized management of street lamps through an advanced interface and control architecture provided by ZigBee devices. Sensors monitor and control system parameters, transmitting data via ZigBee transmitters and receivers to a control terminal where the state of streetlamps can be checked and failures addressed.
A wireless electrocardiogram detection for personal health monitoring
The document describes a low-power system for wireless electrocardiogram (ECG) detection in personal health monitoring. The system includes three subsystems: 1) an ECG acquisition node with a preamplifier, low-pass filter, and analog-to-digital converter to detect ECG signals, 2) a ZigBee protocol for wireless communication, and 3) radio frequency transmitter circuits including a power amplifier and mixer to transmit the ECG signals wirelessly. The system has been implemented in a wireless bio-signal acquisition system-on-chip using a 0.18-micron CMOS process, and testing on the human body showed it can effectively acquire ECG signals.
Real time implementation of the vertex component analysis algorithm on gp us
The document presents a new parallel implementation of the vertex component analysis (VCA) algorithm for spectral unmixing of remotely sensed hyperspectral data using commodity graphics processing units (GPUs). The authors developed a C serial version of the VCA algorithm and three parallel GPU versions using CUDA, CUBLAS, and CULA. Experimental results on hyperspectral images show the GPU implementations satisfy real-time constraints given acquisition rates.
Covering points of interest with mobile sensors
Sensors need to autonomously deploy to cover points of interest while maintaining connectivity to a base station. This paper proposes an algorithm where each sensor moves toward a point of interest but also maintains connectivity with neighboring sensors that are part of a relative neighborhood graph, minimizing connectivity sensors and maximizing monitoring sensors. Analysis, simulations, and implementation show the efficiency of the algorithm in optimizing sensor deployment over points of interest with connectivity constraints.
Deducción empírica
Juan conoce a su nuevo vecino Miguel, quien le dice que es profesor de Deducción Empírica. Miguel le explica que esto significa deducir información sobre alguien basada en evidencia observable, como deducir que Juan tiene un perro y una familia porque tiene una casita para perros. Más tarde, Juan le cuenta a su otro vecino José sobre Miguel y su profesión, y usa el mismo método deductivo con José, aunque llega a una conclusión incorrecta.
Wireless sensor network for multi storey building design and implementation
Wireless sensor networks are a potential solution for home automation due to their reliability, low cost and low power usage. This paper describes the design and implementation of a wireless sensor network to control and monitor systems in a multi-storey building. The network was developed using Microchip ZigBee and installed in a building at the International University to evaluate its performance in a multi-storey environment.
Automated control system for air pollution detection in vehicles
This document proposes an automated control system to detect air pollution from vehicles. The system would use semiconductor sensors at the vehicle's emission outlets to detect pollutant levels, indicate the levels on a meter, and stop the vehicle if the pollution threshold is breached. When the threshold is breached, the vehicle would buzz to notify the driver and be given a cushion time to park before the fuel is cut off. During this time, the GPS would locate the nearest service station for the vehicle to be towed to. A microcontroller would synchronize and monitor the entire process. This system aims to help reduce air pollution by vehicles.
PF2 Foundation
Three former Moody's employees have formed a company called PF2 Securities Evaluations to assign values to collateralized debt obligations (CDOs) for clients. PF2 aims to provide fair value estimates for CDOs by considering their underlying cash flows, credit quality, and risk. They see demand increasing given the turmoil in credit markets which has made valuing CDOs difficult, as banks have scaled back these operations. PF2 hopes to value the growing number of CDOs in default.
Monitoring of cigarette smoking using wearable sensors and support vector mac...
This document presents a method for monitoring cigarette smoking using wearable sensors and machine learning classifiers. A device called PACT tracks breathing patterns and hand movements to recognize when someone inhales cigarette smoke. Support vector machines were trained on data from 20 subjects performing daily activities. Models specific to each individual achieved 90% accuracy on average at identifying smoke inhalations. Group models considering all subjects together obtained only slightly lower accuracy, showing signals contain identifiable patterns despite individual differences. The results suggest cigarette smoking can feasibly be monitored in everyday life using a noninvasive wearable sensor system.
Pragmatic integration of an sram row cache in heterogeneous 3 d dram architec...
An SRAM row cache can be integrated into a heterogeneous 3D-DRAM architecture using through-silicon vias to address issues with scaling DRAM cells and improve energy efficiency. The proposed approach stacks DRAM dies vertically and integrates an SRAM row cache. Simulation results show this approach improves performance by 30% and reduces dynamic energy by 31% for memory-intensive applications compared to simple stacking alone.
On the reconstruction of quad pol sar data from compact polarimetry data for ...
The document discusses reconstructing quad-polarized synthetic aperture radar (SAR) data from compact polarimetry data for ocean target detection. It presents an empirical reconstruction model that was tested on ocean scenes and found to outperform two existing reconstruction algorithms by providing superior reconstruction and target detection performance. The empirical model is a simple approach whose assumptions were found to be more valid for ocean scenes compared to the two published reconstruction algorithms.
Communication networks of domestic small scale renewable energy systems
This paper presents communication network architectures using both wireless and wired mediums to monitor and control distributed energy systems including small-scale wind turbines and photovoltaic systems. It evaluates the performance of monitoring standalone renewable energy systems using various sensors to collect measurement data, as well as grid-connected microgrid systems using a hybrid wired-wireless network configuration. The paper models and compares the end-to-end delay of Ethernet, Wi-Fi and ZigBee-based network architectures.
Operating systems
This document discusses operating systems and provides instructions for tasks related to operating systems. It defines operating systems as software that controls peripherals, runs other programs, and manages files. It notes that Windows is one of the most common operating systems and lists some versions like Windows XP, 2000, Vista, 7, and 8. It also lists other operating systems like Linux, Lion, and Android. The tasks listed are to paste desktops of various operating systems into the document, complete an exercise on page 32, and make a PowerPoint with operating system vocabulary.
Rfid based digital content copy protection system in movie and audio rental a...
This document proposes an RFID-based digital content copy protection system for movie and audio rental agencies. It acknowledges that while digital rights management has helped fight piracy, pirated contents remain widespread due to weaknesses in DRM systems like their inability to control tampering of analog/digital buses. The proposed system would use RFID technology and cryptography algorithms to provide end-to-end protection for digital content in media rental markets.
Optimal angular movement of laser beam in spr using an embedded controller
This document proposes using a PIC microcontroller to control the angular movement of a laser beam in a surface plasmon resonance (SPR) instrument. SPR analysis is an important optical biosensing technique used in medical, biological and other research. The SPR works by focusing a laser beam from a stepper motor-mounted laser onto a gold-coated prism surface at an angle greater than the critical angle, generating SPR outward. Changes in the refractive index from applied samples can be detected. The document describes a laboratory prototype using a PIC microcontroller to control the stepper motor movement of the laser, allowing for faster and more accurate SPR analysis and demonstrating the importance of microcontrollers in instrument design and control.
Zigbee and atmega32 based wireless digital control and monitoring system for ...
This document presents a wireless embedded control system using Zigbee and ATmega32 that can be used to switch on/off indoor and outdoor LED lights and reduce light intensity to effectively reduce power consumption. This improves the energy efficiency of lighting systems while providing sophisticated control over energy usage.
Exponential and power law distribution of contact duration in urban vehicular...
Contact duration between moving vehicles is a key metric that influences routing schemes and network throughput in vehicular ad hoc networks (VANETs). An analysis of contact records from tens of thousands of taxis in Beijing found that contact duration exhibits an exponential distribution for at least 80% of the distribution, up to a characteristic time point, after which it follows a power law distribution. This contrasts with human mobility studies where contact duration shows a pure power law distribution. The findings provide guidance for designing new routing protocols for urban VANETs.
Dynamic wireless sensor networks for real time safeguard of workers exposed t...
The document introduces a wireless sensor network designed to protect construction workers from physical hazards. The network uses either a standard ZigBee communication scheme or a more flexible ad-hoc configuration with lower bandwidth and frequency needs. A compact, washable, and ergonomic wireless sensor node was designed and developed to detect various physical phenomena like ultraviolet rays and dust, which can cause health issues for workers. The sensor node is sewn directly into a worker's garment with the antenna integrated into the fabric to form a single unified structure. Initial tests with a non-optimized prototype validated the overall approach and applicability to real worksite scenarios.
Wireless access control system based on ieee 802.15.4
This document describes a wireless access control system that uses ZigBee and image processing to control a door lock in a smart home environment. The system includes a ZigBee-enabled door lock module that was designed and developed. It also analyzes image transfer over ZigBee networks for different image sizes and discusses challenges involved in the face recognition module.
15.girişimcilik ödevi r.özgür akbaş
This document contains a personal survival budget for R.Özgür Akbaş, a civil engineering student. It lists estimated monthly costs totaling 34,100 TL, including rent, utilities, food, transportation, and other living expenses. It also lists estimated monthly income totaling 14,000 TL from a partner, family, part-time job, and government benefits. The document notes that Akbaş requires 8,000 TL per month to survive but needs to take 10,000 TL from their business each month to meet costs.
Passenger bus alert system for easy navigation of blind
This project proposes a bus alert system to help blind passengers navigate public transportation more easily. The system uses wireless sensor networks and ZigBee transmitters so that when a blind person enters a bus station, their presence is detected and the appropriate bus is alerted to stop. When the bus arrives, the blind passenger can provide their destination verbally, which is then analyzed to determine the correct bus numbers. The numbers are transmitted to the passenger's ZigBee receiver and announced so they know which bus to board. Finally, GPS is used to announce when the passenger has reached their stop. The goal is to help blind and elderly people travel independently on buses.
More Related Content
Viewers also liked
Wireless sensor network for multi storey building design and implementation
Wireless sensor networks are a potential solution for home automation due to their reliability, low cost and low power usage. This paper describes the design and implementation of a wireless sensor network to control and monitor systems in a multi-storey building. The network was developed using Microchip ZigBee and installed in a building at the International University to evaluate its performance in a multi-storey environment.
Automated control system for air pollution detection in vehicles
This document proposes an automated control system to detect air pollution from vehicles. The system would use semiconductor sensors at the vehicle's emission outlets to detect pollutant levels, indicate the levels on a meter, and stop the vehicle if the pollution threshold is breached. When the threshold is breached, the vehicle would buzz to notify the driver and be given a cushion time to park before the fuel is cut off. During this time, the GPS would locate the nearest service station for the vehicle to be towed to. A microcontroller would synchronize and monitor the entire process. This system aims to help reduce air pollution by vehicles.
PF2 Foundation
Three former Moody's employees have formed a company called PF2 Securities Evaluations to assign values to collateralized debt obligations (CDOs) for clients. PF2 aims to provide fair value estimates for CDOs by considering their underlying cash flows, credit quality, and risk. They see demand increasing given the turmoil in credit markets which has made valuing CDOs difficult, as banks have scaled back these operations. PF2 hopes to value the growing number of CDOs in default.
Monitoring of cigarette smoking using wearable sensors and support vector mac...
This document presents a method for monitoring cigarette smoking using wearable sensors and machine learning classifiers. A device called PACT tracks breathing patterns and hand movements to recognize when someone inhales cigarette smoke. Support vector machines were trained on data from 20 subjects performing daily activities. Models specific to each individual achieved 90% accuracy on average at identifying smoke inhalations. Group models considering all subjects together obtained only slightly lower accuracy, showing signals contain identifiable patterns despite individual differences. The results suggest cigarette smoking can feasibly be monitored in everyday life using a noninvasive wearable sensor system.
Pragmatic integration of an sram row cache in heterogeneous 3 d dram architec...
An SRAM row cache can be integrated into a heterogeneous 3D-DRAM architecture using through-silicon vias to address issues with scaling DRAM cells and improve energy efficiency. The proposed approach stacks DRAM dies vertically and integrates an SRAM row cache. Simulation results show this approach improves performance by 30% and reduces dynamic energy by 31% for memory-intensive applications compared to simple stacking alone.
On the reconstruction of quad pol sar data from compact polarimetry data for ...
The document discusses reconstructing quad-polarized synthetic aperture radar (SAR) data from compact polarimetry data for ocean target detection. It presents an empirical reconstruction model that was tested on ocean scenes and found to outperform two existing reconstruction algorithms by providing superior reconstruction and target detection performance. The empirical model is a simple approach whose assumptions were found to be more valid for ocean scenes compared to the two published reconstruction algorithms.
Communication networks of domestic small scale renewable energy systems
This paper presents communication network architectures using both wireless and wired mediums to monitor and control distributed energy systems including small-scale wind turbines and photovoltaic systems. It evaluates the performance of monitoring standalone renewable energy systems using various sensors to collect measurement data, as well as grid-connected microgrid systems using a hybrid wired-wireless network configuration. The paper models and compares the end-to-end delay of Ethernet, Wi-Fi and ZigBee-based network architectures.
Operating systems
This document discusses operating systems and provides instructions for tasks related to operating systems. It defines operating systems as software that controls peripherals, runs other programs, and manages files. It notes that Windows is one of the most common operating systems and lists some versions like Windows XP, 2000, Vista, 7, and 8. It also lists other operating systems like Linux, Lion, and Android. The tasks listed are to paste desktops of various operating systems into the document, complete an exercise on page 32, and make a PowerPoint with operating system vocabulary.
Rfid based digital content copy protection system in movie and audio rental a...
This document proposes an RFID-based digital content copy protection system for movie and audio rental agencies. It acknowledges that while digital rights management has helped fight piracy, pirated contents remain widespread due to weaknesses in DRM systems like their inability to control tampering of analog/digital buses. The proposed system would use RFID technology and cryptography algorithms to provide end-to-end protection for digital content in media rental markets.
Optimal angular movement of laser beam in spr using an embedded controller
This document proposes using a PIC microcontroller to control the angular movement of a laser beam in a surface plasmon resonance (SPR) instrument. SPR analysis is an important optical biosensing technique used in medical, biological and other research. The SPR works by focusing a laser beam from a stepper motor-mounted laser onto a gold-coated prism surface at an angle greater than the critical angle, generating SPR outward. Changes in the refractive index from applied samples can be detected. The document describes a laboratory prototype using a PIC microcontroller to control the stepper motor movement of the laser, allowing for faster and more accurate SPR analysis and demonstrating the importance of microcontrollers in instrument design and control.
Zigbee and atmega32 based wireless digital control and monitoring system for ...
This document presents a wireless embedded control system using Zigbee and ATmega32 that can be used to switch on/off indoor and outdoor LED lights and reduce light intensity to effectively reduce power consumption. This improves the energy efficiency of lighting systems while providing sophisticated control over energy usage.
Exponential and power law distribution of contact duration in urban vehicular...
Contact duration between moving vehicles is a key metric that influences routing schemes and network throughput in vehicular ad hoc networks (VANETs). An analysis of contact records from tens of thousands of taxis in Beijing found that contact duration exhibits an exponential distribution for at least 80% of the distribution, up to a characteristic time point, after which it follows a power law distribution. This contrasts with human mobility studies where contact duration shows a pure power law distribution. The findings provide guidance for designing new routing protocols for urban VANETs.
Dynamic wireless sensor networks for real time safeguard of workers exposed t...
The document introduces a wireless sensor network designed to protect construction workers from physical hazards. The network uses either a standard ZigBee communication scheme or a more flexible ad-hoc configuration with lower bandwidth and frequency needs. A compact, washable, and ergonomic wireless sensor node was designed and developed to detect various physical phenomena like ultraviolet rays and dust, which can cause health issues for workers. The sensor node is sewn directly into a worker's garment with the antenna integrated into the fabric to form a single unified structure. Initial tests with a non-optimized prototype validated the overall approach and applicability to real worksite scenarios.
Wireless access control system based on ieee 802.15.4
This document describes a wireless access control system that uses ZigBee and image processing to control a door lock in a smart home environment. The system includes a ZigBee-enabled door lock module that was designed and developed. It also analyzes image transfer over ZigBee networks for different image sizes and discusses challenges involved in the face recognition module.
15.girişimcilik ödevi r.özgür akbaş
This document contains a personal survival budget for R.Özgür Akbaş, a civil engineering student. It lists estimated monthly costs totaling 34,100 TL, including rent, utilities, food, transportation, and other living expenses. It also lists estimated monthly income totaling 14,000 TL from a partner, family, part-time job, and government benefits. The document notes that Akbaş requires 8,000 TL per month to survive but needs to take 10,000 TL from their business each month to meet costs.
Passenger bus alert system for easy navigation of blind
This project proposes a bus alert system to help blind passengers navigate public transportation more easily. The system uses wireless sensor networks and ZigBee transmitters so that when a blind person enters a bus station, their presence is detected and the appropriate bus is alerted to stop. When the bus arrives, the blind passenger can provide their destination verbally, which is then analyzed to determine the correct bus numbers. The numbers are transmitted to the passenger's ZigBee receiver and announced so they know which bus to board. Finally, GPS is used to announce when the passenger has reached their stop. The goal is to help blind and elderly people travel independently on buses.
Viewers also liked (18)
Wireless sensor network for multi storey building design and implementation
Wireless sensor network for multi storey building design and implementation
Automated control system for air pollution detection in vehicles
Automated control system for air pollution detection in vehicles
Monitoring of cigarette smoking using wearable sensors and support vector mac...
Monitoring of cigarette smoking using wearable sensors and support vector mac...
Pragmatic integration of an sram row cache in heterogeneous 3 d dram architec...
Pragmatic integration of an sram row cache in heterogeneous 3 d dram architec...
On the reconstruction of quad pol sar data from compact polarimetry data for ...
On the reconstruction of quad pol sar data from compact polarimetry data for ...
Communication networks of domestic small scale renewable energy systems
Communication networks of domestic small scale renewable energy systems
Rfid based digital content copy protection system in movie and audio rental a...
Rfid based digital content copy protection system in movie and audio rental a...
Optimal angular movement of laser beam in spr using an embedded controller
Optimal angular movement of laser beam in spr using an embedded controller
Zigbee and atmega32 based wireless digital control and monitoring system for ...
Zigbee and atmega32 based wireless digital control and monitoring system for ...
Exponential and power law distribution of contact duration in urban vehicular...
Exponential and power law distribution of contact duration in urban vehicular...
Dynamic wireless sensor networks for real time safeguard of workers exposed t...
Dynamic wireless sensor networks for real time safeguard of workers exposed t...
Wireless access control system based on ieee 802.15.4
Wireless access control system based on ieee 802.15.4
Passenger bus alert system for easy navigation of blind
Passenger bus alert system for easy navigation of blind
The ultrasonic distance alarm system based on msp430 f449
- 1. THE ULTRASONIC DISTANCE ALARM SYSTEM BASED ON MSP430F449 ABSTRACT: The principle ultrasonic distance measurement was introduced. Using Texas Instrument's micro controller MSP430F449 and ultrasonic sensor TCT40-16F, an ultrasonic measurement and alarm system with high precision was designed. Adopting the method of MJ echo capture, the system can measure the distance well and truly, and can send the realtime distance data to the LCD screen of system. Once the distance was less than the setting value, the system would alarm immediately. In addition, the system uses temperature sensor for temperature compensation, which effectively improves the ranging accuracy. Experimental results show that the system has high range accuracy, and can complete the distance measuring task in cars.