Corso di Tecnica delle Costruzioni per Ingegneri Civili presso la Facolta' di Ingegneria della Sapienza di Roma, Prof. Ing. Franco Bontempi (appunti del I semestre del raccolti da Alessandra Aguinagalde)
Appunti del corso di Tecnica delle Costruzioni - Bontempi, SapienzaFranco Bontempi
Appunti del corso di Tecnica delle Costruzioni Prof. Ing. Franco Bontempi, Facolta' di Ingegneria Civile e Industriale, Sapienza Universita' di Roma, raccolti dalla Allieva Alessia Perini.
Programma del Corso di Tecnica delle Costruzioni
A.A. 2021/22 - Prof. Ing. Franco Bontempi
Facoltà di Ingegneria Civile e Industriale
Università degli Studi di Roma la Sapienza
Libro che raccoglie le lezioni del Prof. Giulio Ceradini a cura del Prof. Carlo Gavarini.
Ad uso esclusivo degli Allievi del Corso di Teoria e Progetto di Ponti della Facoltà di Ingegneria della Sapienza - Prof. Ing. Franco Bontempi
repertorio di ponti in cemento armato.
solo per Allievi dei corsi di Teoria e Progetto di Ponti - Gestione di Ponti e Grandi Strutture, Prof. Ing. Franco Bontempi, Sapienza Università di Roma.
Analisi tridimensionale di pile da ponte a doppia lama.Franco Bontempi
Giornate AICAP 2002
La pila da ponte a doppia lama è formata da due parti con caratteristiche geometriche e meccaniche molto diverse tra
loro. La prima parte è costituita da un cassone chiuso, molto rigido; la seconda, superiore, è composta da due lame
flessibili collegate rigidamente in sommità. Analizzando la struttura nella sua tridimensionalità, si vuole porre in rilievo
alcuni comportamenti che un’analisi più semplice non è in grado di cogliere.
Appunti del corso di Tecnica delle Costruzioni - Bontempi, SapienzaFranco Bontempi
Appunti del corso di Tecnica delle Costruzioni Prof. Ing. Franco Bontempi, Facolta' di Ingegneria Civile e Industriale, Sapienza Universita' di Roma, raccolti dalla Allieva Alessia Perini.
Programma del Corso di Tecnica delle Costruzioni
A.A. 2021/22 - Prof. Ing. Franco Bontempi
Facoltà di Ingegneria Civile e Industriale
Università degli Studi di Roma la Sapienza
Libro che raccoglie le lezioni del Prof. Giulio Ceradini a cura del Prof. Carlo Gavarini.
Ad uso esclusivo degli Allievi del Corso di Teoria e Progetto di Ponti della Facoltà di Ingegneria della Sapienza - Prof. Ing. Franco Bontempi
repertorio di ponti in cemento armato.
solo per Allievi dei corsi di Teoria e Progetto di Ponti - Gestione di Ponti e Grandi Strutture, Prof. Ing. Franco Bontempi, Sapienza Università di Roma.
Analisi tridimensionale di pile da ponte a doppia lama.Franco Bontempi
Giornate AICAP 2002
La pila da ponte a doppia lama è formata da due parti con caratteristiche geometriche e meccaniche molto diverse tra
loro. La prima parte è costituita da un cassone chiuso, molto rigido; la seconda, superiore, è composta da due lame
flessibili collegate rigidamente in sommità. Analizzando la struttura nella sua tridimensionalità, si vuole porre in rilievo
alcuni comportamenti che un’analisi più semplice non è in grado di cogliere.
ntesi degli argomenti trattati nella esercitazione 7 (parte 1) del Corso di Tecnica delle Costruzioni tenuto presso la Facoltà di Ingegneria Civile della Sapienza di Roma
My research considers all the themes related to Structural Engineering as Safety and Reliability, Performance-based Design, Computer Aided Structural Design, Identification and Optimization, Dynamics and Control, Nonlinear Analysis, Uncertainty Analysis. There is always a strong commitment toward real applications for reinforced concrete and steel constructions, bridges, tall buildings, special structures and innovative concepts, also under extreme and accidental situations.
Costruzioni Metalliche - Ponti: seminario Ing. Luca ROMANOFranco Bontempi
Slide del seminario dell'Ing. Luca Romano nell'ambito del Corso di Costruzioni Metalliche della Facolta' di Ingegneria Civile e Industriale dell'Universita' degli Studi di Roma La Sapienza, 5 dicembre 2013.
repertorio di ponti in cemento armato.
solo per Allievi dei corsi di Teoria e Progetto di Ponti - Gestione di Ponti e Grandi Strutture, Prof. Ing. Franco Bontempi, Sapienza Università di Roma.
Calcolo della precompressione:
DOMINI e STRAUS7
Corso di Gestione di Ponti e Grandi Strutture A.A. 2021/22
Prof. Ing. Franco Bontempi
Facoltà di Ingegneria Civile e Industriale
Sapienza Università di Roma
Connessioni in Acciaio - Lezione 14 dicembre2012Franco Bontempi
Lezione del 14 dicembre 2012 dell'Ing. Chiara Crosti - Corso di Costruzioni Metalliche del Prof. Ing. Franco Bontempi presso la Facolta' di Ingegneria della Universita' di Roma La Sapienza
Programma del corso di Teoria e Progetto di Ponti
A.A. 2021/22 - Prof. Ing. Franco Bontempi
Facoltà di Ingegneria Civile e Industriale
Università degli Studi di Roma La Sapienza
Appunti sulle modellazioni discrete per ponti e viadotti.
Corso di GESTIONE DI PONTI E GRANDI STRUTTURE, prof. ing. Franco Bontempi, Sapienza Universita' di Roma
Scopo dell'evento è
• illustrare l'identità culturale, e tecnica – di cui il progetto è parte fondante – del SSD Tecnica delle Costruzioni nella didattica,
• evidenziando contemporaneamente le opportunità di collaborazione trasversale con altre discipline,
• con particolare riferimento ai corsi della lauree magistrali o
equivalenti, e livelli di formazione successivi (master e dottorati).
Corso di Aggiornamento Professionale
MODELLAZIONE STRUTTURALE
E CALCOLO AUTOMATICO DELLE STRUTTURE
Ordine degli Ingegneri della Provincia di Pordenone
21-22 settembre 2017
Lezione Dott. Ing. Francesco Petrini
Concorso Roma La Sapienza Tecnica delle CostruzioniFranco Bontempi
PROCEDURA DI VALUTAZIONE COMPARATIVA PER LA COPERTURA DI N.1 POSTO DI RICERCATORE UNIVERSITARIO PRESSO LA FACOLTA’ DI INGEGNERIA CIVILE E INDUSTRIALE DELL’UNIVERSITA’ DEGLI STUDI DI ROMA LA SAPIENZA PER IL SETTORE SCIENTIFICO-DISCIPLINARE ICAR09 – TECNICA DELLE COSTRUZIONI (BANDO – G.U. n.85 DEL 26-10-2010).
RELAZIONE DI MINORANZA DEL PROF. FRANCO BONTEMPI, PRESIDENTE DELLA COMMISSIONE, MEMBRO INTERNO DESIGNATO DELLA FACOLTA’.
http://www2.uniroma1.it/organizzazione/amministrazione/ ripartizionepersonale/commissioni/seconda2010/schedaI CAR-09IngegneriaRU.php
Roma, 17 settembre 2012
ntesi degli argomenti trattati nella esercitazione 7 (parte 1) del Corso di Tecnica delle Costruzioni tenuto presso la Facoltà di Ingegneria Civile della Sapienza di Roma
My research considers all the themes related to Structural Engineering as Safety and Reliability, Performance-based Design, Computer Aided Structural Design, Identification and Optimization, Dynamics and Control, Nonlinear Analysis, Uncertainty Analysis. There is always a strong commitment toward real applications for reinforced concrete and steel constructions, bridges, tall buildings, special structures and innovative concepts, also under extreme and accidental situations.
Costruzioni Metalliche - Ponti: seminario Ing. Luca ROMANOFranco Bontempi
Slide del seminario dell'Ing. Luca Romano nell'ambito del Corso di Costruzioni Metalliche della Facolta' di Ingegneria Civile e Industriale dell'Universita' degli Studi di Roma La Sapienza, 5 dicembre 2013.
repertorio di ponti in cemento armato.
solo per Allievi dei corsi di Teoria e Progetto di Ponti - Gestione di Ponti e Grandi Strutture, Prof. Ing. Franco Bontempi, Sapienza Università di Roma.
Calcolo della precompressione:
DOMINI e STRAUS7
Corso di Gestione di Ponti e Grandi Strutture A.A. 2021/22
Prof. Ing. Franco Bontempi
Facoltà di Ingegneria Civile e Industriale
Sapienza Università di Roma
Connessioni in Acciaio - Lezione 14 dicembre2012Franco Bontempi
Lezione del 14 dicembre 2012 dell'Ing. Chiara Crosti - Corso di Costruzioni Metalliche del Prof. Ing. Franco Bontempi presso la Facolta' di Ingegneria della Universita' di Roma La Sapienza
Programma del corso di Teoria e Progetto di Ponti
A.A. 2021/22 - Prof. Ing. Franco Bontempi
Facoltà di Ingegneria Civile e Industriale
Università degli Studi di Roma La Sapienza
Appunti sulle modellazioni discrete per ponti e viadotti.
Corso di GESTIONE DI PONTI E GRANDI STRUTTURE, prof. ing. Franco Bontempi, Sapienza Universita' di Roma
Scopo dell'evento è
• illustrare l'identità culturale, e tecnica – di cui il progetto è parte fondante – del SSD Tecnica delle Costruzioni nella didattica,
• evidenziando contemporaneamente le opportunità di collaborazione trasversale con altre discipline,
• con particolare riferimento ai corsi della lauree magistrali o
equivalenti, e livelli di formazione successivi (master e dottorati).
Corso di Aggiornamento Professionale
MODELLAZIONE STRUTTURALE
E CALCOLO AUTOMATICO DELLE STRUTTURE
Ordine degli Ingegneri della Provincia di Pordenone
21-22 settembre 2017
Lezione Dott. Ing. Francesco Petrini
Concorso Roma La Sapienza Tecnica delle CostruzioniFranco Bontempi
PROCEDURA DI VALUTAZIONE COMPARATIVA PER LA COPERTURA DI N.1 POSTO DI RICERCATORE UNIVERSITARIO PRESSO LA FACOLTA’ DI INGEGNERIA CIVILE E INDUSTRIALE DELL’UNIVERSITA’ DEGLI STUDI DI ROMA LA SAPIENZA PER IL SETTORE SCIENTIFICO-DISCIPLINARE ICAR09 – TECNICA DELLE COSTRUZIONI (BANDO – G.U. n.85 DEL 26-10-2010).
RELAZIONE DI MINORANZA DEL PROF. FRANCO BONTEMPI, PRESIDENTE DELLA COMMISSIONE, MEMBRO INTERNO DESIGNATO DELLA FACOLTA’.
http://www2.uniroma1.it/organizzazione/amministrazione/ ripartizionepersonale/commissioni/seconda2010/schedaI CAR-09IngegneriaRU.php
Roma, 17 settembre 2012
L’incontro ha l’obiettivo di delineare l'identità culturale, scientifica e tecnica della disciplina della Tecnica delle Costruzioni nella didattica, evidenziando contemporaneamente le opportunità di collaborazione trasversale con altre discipline, con particolare riferimento ai corsi della lauree magistrali o equivalenti, e livelli di formazione successivi (master e dottorati).
In recent years, there has been an increasing interest in permanent observation of the dynamic behaviour of bridges for longterm
monitoring purpose. This is due not only to the ageing of a lot of structures, but also for dealing with the increasing
complexity of new bridges. The long-term monitoring of bridges produces a huge quantity of data that need to be effectively
processed. For this purpose, there has been a growing interest on the application of soft computing methods. In particular,
this work deals with the applicability of Bayesian neural networks for the identification of damage of a cable-stayed bridge.
The selected structure is a real bridge proposed as benchmark problem by the Asian-Pacific Network of Centers for Research
in Smart Structure Technology (ANCRiSST). They shared data coming from the long-term monitoring of the bridge with the
structural health monitoring community in order to assess the current progress on damage detection and identification
methods with a full-scale example. The data set includes vibration data before and after the bridge was damaged, so they are
useful for testing new approaches for damage detection. In the first part of the paper, the Bayesian neural network model is
discussed; then in the second part, a Bayesian neural network procedure for damage detection has been tested. The proposed
method is able to detect anomalies on the behaviour of the structure, which can be related to the presence of damage. In order
to obtain a confirmation of the obtained results, in the last part of the paper, they are compared with those obtained by using a
traditional approach for vibration-based structural identification.
In recent years, structural integrity monitoring has become increasingly important in structural engineering and construction management. It represents an important tool for the assessment of the dependability of existing complex structural systems as it integrates, in a unified perspective, advanced engineering analyses and experimental data processing. In the first part of this work
the concepts of dependability and structural integrity are
discussed and it is shown that an effective integrity assessment
needs advanced computational methods. For this purpose, soft computing methods have shown to be very useful. In particular, in this work the neural networks model is chosen and successfully improved by applying the Bayesian inference at four hierarchical levels: for training, optimization of the regularization terms, databased model selection, and evaluation of the relative importance of different inputs. In the second part of the article,
Bayesian neural networks are used to formulate a
multilevel strategy for the monitoring of the integrity of long span bridges subjected to environmental actions: in a first level the occurrence of damage is detected; in a following level the specific damaged element is recognized and the intensity of damage is quantified.
This paper deals with the general framework for the development and the maintenance of complex structural systems. In the first part, starting with a semantic analysis of the term ‘structure’, the traditional approach to structural problem solving has been reconsidered. Consequently, a systemic approach for the formulation of the different kinds of direct and inverse problems has been framed, particularly with regards to structural design and
maintenance. The overall design phase is defined with the aid of the performance-based design (PBD) philosophy, emphasizing the concepts of dependability and enlightening the role of structural identification. The second part of the present work analyses structural health monitoring (SHM) in the systemic way previously introduced. Finally, the techniques related to the implementation of the monitoring process are introduced and a synoptic overview of methods and instruments for structural health monitoring is
presented, with particular attention to the ones necessary for structural damage identification.
Disegni strutturali e particolari costruttivi di ponti in cemento armato raccolti dall'Ing. Cosimo Bianchi.
Ad uso esclusivo degli Allievi del Corso di Teoria e Progetto di Ponti della Facoltà di Ingegneria della Sapienza - Prof. Ing. Franco Bontempi
Disegni strutturali e particolari costruttivi di ponti in acciaio raccolti dall'Ing. Cosimo Bianchi.
Ad uso esclusivo degli Allievi del Corso di Teoria e Progetto di Ponti della Facoltà di Ingegneria della Sapienza - Prof. Ing. Franco Bontempi
A numerical approach to the reliability analysis of reinforced and prestressed concrete structures is presented. The problem is formulated in terms of the probabilistic safety factor and the structural reliability is evaluated by Monte
Carlo simulation. The cumulative distribution of the safety factor associated with each limit state is derived and a reliability index is evaluated. The proposed procedure is applied to reliability analysis of an existing prestressed concrete arch bridge.
This paper presents a general approach to the probabilistic prediction of the structural service life and to the maintenance
planning of deteriorating concrete structures. The proposed formulation is based on a novel methodology for the assessment of the time-variant structural performance under the diffusive attack of external aggressive agents. Based on this methodology, Monte Carlo
simulation is used to account for the randomness of the main structural parameters, including material properties, geometrical parameters, area and location of the reinforcement, material diffusivity and damage rates. The time-variant reliability is then computed with respect to proper measures of structural performance. The results of the lifetime durability analysis are finally used to select, among different maintenance scenarios, the most economical rehabilitation strategy leading to a prescribed target value of the structural service life. Two numerical applications, a box-girder bridge deck and a pier of an existing bridge, show the effectiveness of the proposed methodology.
This paper presents a novel approach to the problem of durability analysis and lifetime assessment of concrete structures under
the diffusive attack from external aggressive agents. The proposed formulation mainly refers to beams and frames, but it can be easily
extended also to other types of structures. The diffusion process is modeled by using cellular automata. The mechanical damage coupled to diffusion is evaluated by introducing suitable material degradation laws. Since the rate of mass diffusion usually depends on the stress state, the interaction between the diffusion process and the mechanical behavior of the damaged structure is also taken into account by a proper modeling of the stochastic effects in the mass transfer. To this aim, the nonlinear structural analyses during time are performed
within the framework of the finite element method by means of a deteriorating reinforced concrete beam element. The effectiveness of the
proposed methodology in handling complex geometrical and mechanical boundary conditions is demonstrated through some applications.
Firstly, a reinforced concrete box girder cross section is considered and the damaging process is described by the corresponding evolution of both bending moment–curvature diagrams and axial force-bending moment resistance domains. Secondly, the durability analysis of a
reinforced concrete continuous T-beam is developed. Finally, the proposed approach is applied to the analysis of an existing arch bridge and to the identification of its critical members.
The paper deals with the assessment during time of r.c. structures under damage due to diffusion of external agents inside the structure. The diffusion process is modelled by a cellular automata based approach, taking the interaction with the mechanical state of the structures, i.e. the cracking state of the structures, into account. A so-called staggered process then solves the coupled problem. An application shows the effectiveness of the proposed analysis strategy, together some design considerations about the structural robustness.
Atti Congresso CTE, Pisa 2000