Acvm safety data sheet, a new type of PVC processing aid and impact modifier by WestMoonint

1,478 views

Published on

WestMoonint launches a new type of PVC processing aid and PVC impact modifier.

  • Be the first to comment

  • Be the first to like this

Acvm safety data sheet, a new type of PVC processing aid and impact modifier by WestMoonint

  1. 1. Your Reliable Source for Synthetic Rubber & Chemicals1 ACVM Safety Data Sheet 1. Identification of the Substance/Preparation and the Company/Undertaking Unique reference numbers(s): 3906909090 (HS CODE) Company/undertaking name: WESTMOONINT (HK) CORPORATION LIMITED Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA Telephone: 86-28-61311272 Emergency telephone number: 86-28-61311274 2. Composition (Substance & % content) ITEM CAS # AMOUNT (%) CLASSIFICATION Trade Secret Trade Secret ABOUT 99 Not hazardous Trade Secret NA ABOUT 1 Not hazardous 3. Hazards Identification POWDER MAY FORM EXPLOSIVE MIXTURES WITH AIR 4. First Aid Measures Eyes: Like any foreign body, particles can cause mechanical irritation. Monomer vapors from heated product can cause the following: slight irritation Skin: Prolonged or repeated skin contact can cause the following: slight irritation Inhalation: Repeated or prolonged inhalation of dust can cause the following: nausea, headache, dizziness May cause irritation of respiratory tract. Inhalation of monomer vapor from heated product can cause the following: irritation of nose, throat, and lungs 5. Fire Fighting Measures Ignition temperature 400.0 °C (752.00 °F) Upper explosion limit not applicable Thermal Thermal decomposition may yield acrylic monomers., Combustion Decomposition generates toxic fumes of the following:, Carbon oxides Suitable carbon dioxide (CO2) Extinguishing Media: dry chemical water spray Specific hazards during fire fighting: Material as sold is combustible; burns vigorously with intense heat. Dusts at sufficient concentrations can form explosive mixtures with air. DO NOT use a solid stream of water. A solid stream of water directed at this material may create a potentially explosive airborne dust mixture. Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA Tel: 86-028-61311272 Fax: 86-028-61311273 Web: www.westmoonint.com E-mail: info@westmoonint.com WestMoonint and its logo are trademarks of WESTMOONINT (HK) CORPORATION LIMITED or one of its subsidiaries. Copyright @ 2009 WESTMOONINT (HK) CORPORATION. All rights reserved.
  2. 2. Your Reliable Source for Synthetic Rubber & Chemicals2 Special protective equipment for fire-fighters: Wear self-contained breathing apparatus and protective suit. 7. Accidental Release Measures Personal precautions: Wear compatible, chemically resistant gloves. Use personal protective equipment. Avoid breathing dust. Material can create slippery conditions. Remove all sources of ignition. Ensure adequate ventilation. Methods for cleaning up: Sweep up and shovel into suitable containers for disposal. Use water spray to keep dusting to a minimum. 8. Handling and Storage Do not breathe dust. Do not breathe vapors, mist or gas. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Keep away from heat and sources of ignition. Ground all metal containers during storage and handling. Ensure adequate ventilation. Keep container tightly closed. Advice on protection against fire and explosion: Avoid dusting. Under dusty conditions avoid all sources of ignition, including sparks and static electricity. Storage conditions: Store at room temperature in the original container. Keep away from heat and sources of ignition. Material can burn; limit indoor storage to approved areas equipped with automatic sprinklers. Avoid all ignition sources. This material is not hazardous under normal storage conditions. However, all materials of this type release some monomer vapors or gases when stored for prolonged periods at elevated temperatures. 9. Exposure Controls (contact control/ individual protection) Eye protection: safety glasses with side-shields Eye protection worn must be compatible with respiratory protection system employed. Hand protection: For prolonged or repeated contact use protective gloves. Respiratory protection: A respiratory protection program meeting OSHA 1910.134 and ANSI Z88.2 requirements or equivalent must be followed whenever workplace conditions warrant a respirators use. None required if airborne concentrations are maintained below the exposure limit listed in Exposure Limit Information. When dusty conditions are encountered, wear a properly fitted NIOSH approved (or equivalent) half-mask, air-purifying respirator. Air-purifying respirators should be equipped with NIOSH approved (or equivalent) N95 filters. If oil mist is present, use R95 or P95 filters. Protective measures: Facilities storing or utilizing this material should be equipped with an eyewash facility. Engineering measures: Use explosion-proof local exhaust ventilation with a minimum capture velocity of 150 ft/min (0.75 m/sec) at the point of dust or mist evolution. Refer to the current edition of Industrial Ventilation: A Manual of Recommended Practice published by the American Conference of Governmental Industrial Hygienists for information on the design, installation, use, and maintenance of exhaust systems. 10. Physical and Chemical Properties Form: Powder Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA Tel: 86-028-61311272 Fax: 86-028-61311273 Web: www.westmoonint.com E-mail: info@westmoonint.com WestMoonint and its logo are trademarks of WESTMOONINT (HK) CORPORATION LIMITED or one of its subsidiaries. Copyright @ 2009 WESTMOONINT (HK) CORPORATION. All rights reserved.
  3. 3. Your Reliable Source for Synthetic Rubber & Chemicals3 Color White Odor Pungent, sweet odor Melting point: 130.00-150.00℃ Ignition temperature 400℃ Lower explosion limit-dust 20.02 g/m3 Upper explosion limit NA Vapor pressure NA Water solubility Insoluble Relative density 1.20 Viscosity: Not available Molecular weight: Not available 11. Stability and Reactivity Hazardous reactions None known. Stable Materials to avoid Prolonged contact with acids, alkalies and strong oxidizing agents may attack or dissolve the polymer. Hazardous Heating above the decomposition temperature will release acrylic Decomposition monomers., Products Polymerization Product will not undergo polymerization. 12. Toxicological Information Information given is based on data obtained from similar substances. Acute oral toxicity LD50rat > 5,000 mg/kg Acute inhalation LC50rat Dust generated at a maximum concentration of 3.4 mg/L toxicity for 4 hours was not fatal to any of 24 test animals (12 male and 12 female). Acute dermal toxicity LD50rabbit > 5,000 mg/kg Skin irritation rabbits light irritation Eye irritation rabbits light irritation Sub chronic toxicity A 13-week inhalation study in rats of a compositionally similar acrylic powder showed inflammatory effects in the lung at concentrations of 6 mg/m3 for 6 hours per day, 5 days per week. These findings were consistent with high concentration exposure effects reported for other non-soluble dusts such as titanium dioxide and toner. Maintaining airborne dust concentrations within the recommended exposure limit is not expected to produce adverse effects within the lung. 13. Ecological Information Avoid to spreading these products in the environment. They are not biodegradable, but they are recyclable No effects are expected if dust concentrations are maintained below the Occupational Exposure Standard. No carcinogenic or geotaxis effects are known. Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA Tel: 86-028-61311272 Fax: 86-028-61311273 Web: www.westmoonint.com E-mail: info@westmoonint.com WestMoonint and its logo are trademarks of WESTMOONINT (HK) CORPORATION LIMITED or one of its subsidiaries. Copyright @ 2009 WESTMOONINT (HK) CORPORATION. All rights reserved.
  4. 4. Your Reliable Source for Synthetic Rubber & Chemicals4 14. Disposal Considerations Waste Classification: When a decision is made to discard this material as supplied, it does not meet RCRAs characteristic definition of ignitability, corrosively, or reactivity, and is not listed in 40 CFR 261.33. The toxicity characteristic (TC), however, has not been evaluated by the Toxicity Characteristic Leaching Procedure (TCLP). Place powder in air-tight bags. For disposal, incinerate or landfill at a permitted facility in accordance with local, state, and federal regulations. 15. Transport Information These products are not classified as dangerous for transportation. 16. Regulatory Information These products are not classified as dangerous to supply. OSHA These products are not hazardous under Hazard Communication Standard 29 CFR Part 1910.1200.TSCA Components of these products are listed under TSCA Chemical Substances Inventory. United States: Designation and labeling not applicable as product is not defined or designated as a hazardous material by U.S. Department of Transportation under Title 40 of CFR. Canada: Not regulated under the Canadian Transportation of Dangerous Goods Regulations. SARA Title III Section 302/304: Extremely Hazardous Substances - None. Section 311: These products are not subjected to reporting requirements. WHMIS Components in these products are not listed in Canada’s Workplace Hazardous Material Information System. EEC These products are not considered hazardous by the European Economic Community. 17. Other Information Recommendations/restrictions Sources of key data used to compile Safety Data Sheet: • ABBREVIATIONS: • AL Action Level • TWA Time Weighted Average • Ski Skin contact may be a significant rout of exposure • STEL Short Term Exposure Limit • A2 Suspected Human Carcinogen • CAS Chemical Abstract Service • NIOSH National Institute for Occupational Safety and Health • LD50 The dose that causes death in 50% of the animals exposed • LC50 The concentration in air that causes death in 50% of the animals exposed. • RCRA Resource and Conservation Recovery Act • OSHA Occupational Safety and Health Administration • TSCA Toxic Substance Control Act • DOT Department of Transportation Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA Tel: 86-028-61311272 Fax: 86-028-61311273 Web: www.westmoonint.com E-mail: info@westmoonint.com WestMoonint and its logo are trademarks of WESTMOONINT (HK) CORPORATION LIMITED or one of its subsidiaries. Copyright @ 2009 WESTMOONINT (HK) CORPORATION. All rights reserved.
  5. 5. Your Reliable Source for Synthetic Rubber & Chemicals5 • SARA Superfund Amendments and Reauthorization Act • WHMIS Workplace Hazardous Material Information System • EEC European Economic Community • CFR Code of Federal Regulations DECLARATION Although the information contained in this MSDS is believed to be correct as of the date hereof, WestMoonint makes no representations as to the completeness or accuracy thereof. Those who utilize the product described herein are responsible for determining the suitability of the product for the intended use and the appropriate manner of processing the product to ensure safety and quality. In no event will WestMoonint be responsible for damages of any nature resulting from the use of or reliance upon the information contained herein. Issued by WESTMOONINT (HK) CORPORATION LIMITED in 2011 Version2.11 Address: ROOM2112, BLOCK C OF JINSHA WINERA PLAZA, NO.1 SHUJIN RD, CHENGDU, 610091, SICHUAN, CHINA Tel: 86-028-61311272 Fax: 86-028-61311273 Web: www.westmoonint.com E-mail: info@westmoonint.com WestMoonint and its logo are trademarks of WESTMOONINT (HK) CORPORATION LIMITED or one of its subsidiaries. Copyright @ 2009 WESTMOONINT (HK) CORPORATION. All rights reserved.

×