This document provides safety instructions for operating a hydraulic excavator. It begins with general safety precautions regarding proper clothing, equipment inspection, operating temperatures, and hazard awareness. It then details specific precautions for preparing, starting, operating, stopping, transporting and maintaining the excavator safely. Signal words and safety sign definitions are also included to communicate hazards. The summary focuses on the essential safety messages.
1) Always follow safety rules and wear proper protective equipment when operating machinery.
2) Inspect the excavator daily for issues and make any necessary repairs before use.
3) Start the excavator safely by maintaining three points of contact and engaging safety locks before leaving the seat.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and updfujskeksmefm
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It explains that the owner is responsible for fully instructing operators on safe operation. It provides guidance on proper operation, inspection, and maintenance and cautions that improper practices can cause injury or death. It defines signal words used and various symbols.
Takeuchi tl120 crawler loader operator manual sn 21200008 and upfusjejfjskeksmem
This operator's manual provides instructions for safely operating a crawler loader. It describes the machine, covers general safety precautions, and provides guidance on preparation, starting, operation, stopping, transport, and maintenance. Operators must read and understand the entire manual before use to avoid injury or death. All safety rules, regulations, and procedures must be followed.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upolfjsekdmmes
The document provides an operator's manual for a hydraulic excavator. It begins with several warnings about safety, including the need to read and understand all instructions to prevent injury or death. It emphasizes operating the machine only after receiving proper instruction and familiarizing yourself with its controls. The manual outlines general safety precautions for operating temperatures, protective equipment, and avoiding fire and explosion hazards. It provides guidance for specific situations like starting, stopping, and transporting the machine.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and updfujskeksmefm
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and warnings to avoid injury or death during operation.
- It emphasizes the importance of fully understanding the machine's controls and functions before operating, and following all safety rules, regulations and precautions.
- Operators must wear appropriate protective equipment like a hard hat, safety shoes, glasses and gloves and be unimpaired when working with the excavator.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and upolfjsekdmmes
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and information. It warns that failure to read, understand, and follow the instructions can result in injury or death.
- Operators must be trained and qualified, wear appropriate protective equipment, and not operate under the influence of substances. The machine should only be operated within the specified temperature range.
- Safety precautions include providing fire extinguishers and first aid kits, never removing safety equipment, using proper hand signals with a flagman, and avoiding fire and explosion hazards.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17530314 and upolfjsekdmmes
The document provides an operator's manual for a hydraulic excavator. It begins with several warnings about safety, including the need to read and understand all instructions to prevent injury or death. It emphasizes operating the machine only after receiving proper instruction and familiarizing yourself with its controls. The manual details specific precautions for preparing, starting, operating, stopping, transporting, and maintaining the machine safely.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17530314 and upujjjjfkksekmmdm
1. The document provides safety instructions for the proper operation of a hydraulic excavator.
2. It emphasizes the importance of reading and understanding all safety messages to prevent accidents and injuries.
3. Operators must be trained and qualified, wear appropriate protective equipment, and not operate under the influence of substances.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and updfujskeksmefm
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It explains that the owner is responsible for fully instructing operators on safe operation. It provides guidance on proper operation, inspection, and maintenance and cautions that improper practices can cause injury or death. It defines signal words used and various symbols.
Takeuchi tl120 crawler loader operator manual sn 21200008 and upfusjejfjskeksmem
This operator's manual provides instructions for safely operating a crawler loader. It describes the machine, covers general safety precautions, and provides guidance on preparation, starting, operation, stopping, transport, and maintenance. Operators must read and understand the entire manual before use to avoid injury or death. All safety rules, regulations, and procedures must be followed.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upolfjsekdmmes
The document provides an operator's manual for a hydraulic excavator. It begins with several warnings about safety, including the need to read and understand all instructions to prevent injury or death. It emphasizes operating the machine only after receiving proper instruction and familiarizing yourself with its controls. The manual outlines general safety precautions for operating temperatures, protective equipment, and avoiding fire and explosion hazards. It provides guidance for specific situations like starting, stopping, and transporting the machine.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and updfujskeksmefm
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and warnings to avoid injury or death during operation.
- It emphasizes the importance of fully understanding the machine's controls and functions before operating, and following all safety rules, regulations and precautions.
- Operators must wear appropriate protective equipment like a hard hat, safety shoes, glasses and gloves and be unimpaired when working with the excavator.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and upolfjsekdmmes
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and information. It warns that failure to read, understand, and follow the instructions can result in injury or death.
- Operators must be trained and qualified, wear appropriate protective equipment, and not operate under the influence of substances. The machine should only be operated within the specified temperature range.
- Safety precautions include providing fire extinguishers and first aid kits, never removing safety equipment, using proper hand signals with a flagman, and avoiding fire and explosion hazards.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17530314 and upolfjsekdmmes
The document provides an operator's manual for a hydraulic excavator. It begins with several warnings about safety, including the need to read and understand all instructions to prevent injury or death. It emphasizes operating the machine only after receiving proper instruction and familiarizing yourself with its controls. The manual details specific precautions for preparing, starting, operating, stopping, transporting, and maintaining the machine safely.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17530314 and upujjjjfkksekmmdm
1. The document provides safety instructions for the proper operation of a hydraulic excavator.
2. It emphasizes the importance of reading and understanding all safety messages to prevent accidents and injuries.
3. Operators must be trained and qualified, wear appropriate protective equipment, and not operate under the influence of substances.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810005 and upfsjfksemmwse
The document provides safety instructions for operating a compact excavator. It warns that failure to understand the instructions can result in injury or death. It advises the operator to be fully trained on the machine's controls and functions before operating, and to learn controls in a safe area first before using the machine on a job site. The document outlines general safety precautions including wearing proper protective equipment, using hand signals, providing first aid kits and fire extinguishers, keeping safety guards secure, and avoiding fire and explosion hazards.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810005 and upfdjjjsekkskemm
This operator's manual provides safety instructions and information for operating a compact excavator. It warns that failure to understand and follow the instructions can result in injury or death. It outlines general safety precautions including wearing protective equipment, using signals, and not removing safety guards. Starting precautions include maintaining three points of contact, clearing the area, and starting from the operator's seat. Operating safely requires being aware of the work area, performing inspections, and not putting body parts at risk of being crushed or cut.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810675 and upfsjfksemmwse
The document provides safety instructions for operating a compact excavator. It warns that failure to understand the instructions can result in injury or death. It advises the operator to be fully trained on the machine's controls and functions before operating, and to learn controls in a safe area first before using the machine on a job site. The document outlines general safety precautions including wearing proper protective equipment, using hand signals, providing first aid kits and fire extinguishers, keeping safety guards secure, and avoiding fire and explosion hazards.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upfdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. The document provides explanations of safety signs and symbols used and then moves into sections about the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upfsjfksemmwse
This document provides an operator's manual for a compact excavator. It begins with warnings about the importance of reading and understanding the instructions to avoid injury or death. It then provides sections on safety precautions for preparing, starting, operating, stopping, transporting and maintaining the excavator. The document emphasizes following all safety rules, wearing proper protective equipment, using a fire extinguisher and first aid kit, never removing safety equipment, employing signal persons, locking the safety lock lever before leaving the seat, and avoiding fire and explosion hazards.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upfdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. It then describes the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment. The summary provides essential safety information for operating the compact excavator.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. The document provides explanations of safety signs and symbols used and then moves into sections about the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with warnings about the importance of reading and understanding the instructions to avoid injury or death. It then provides sections on safety precautions for preparing, starting, operating, stopping, transporting and maintaining the excavator. The document emphasizes following all safety rules, wearing proper protective equipment, using a fire extinguisher and first aid kit, never removing safety equipment, employing signal persons, locking the safety lock lever before leaving the seat, and avoiding fire and explosion hazards.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upfsjfksemmwse
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general machine operation, maintenance, and transportation. It then covers the controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment for the excavator. The manual stresses the importance of following all safety procedures to prevent injury when operating or working on the machine.
Takeuchi TB125 Compact Excavator Operator manual SN:12514526 and upfujfdjjsjkkmee
This is the most complete Operation and Maintenance Manual for the TAKEUCHI TB125 COMPACT EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your TAKEUCHI TB125 COMPACT EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of TAKEUCHI TB125 COMPACT EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Controls
Operation
Transport
Maintenance
Troubleshooting
Specifications
Options
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and upujjjjfkksekmmdm
This document provides an operator's manual for a hydraulic excavator. It begins with several warnings about reading the instructions to avoid injury or death. It then provides guidance on safe operation, including using proper protective equipment, following signals from signal persons, keeping safety equipment in place, and avoiding fire hazards. It also describes daily inspection and maintenance requirements and emergency exit procedures.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 175400095 and upujjjjfkksekmmdm
This document provides an operator's manual for a hydraulic excavator. It begins with several warnings about reading the instructions to avoid injury or death. It then provides information about operating safely, including using proper protective equipment, following signals, and keeping safety equipment in place. The document instructs operating within temperature ranges and stopping if any problems are found. It also includes sections about controls, operation, transport, maintenance, troubleshooting and specifications.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 175400095 and updfujskeksmefm
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It provides guidance on safe operation, inspection, maintenance and emergency procedures. Safety is the top priority when operating heavy machinery.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and upolfjsekdmmes
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It explains that the owner is responsible for fully instructing operators on safe operation. It provides guidance on proper operation, inspection, and maintenance and cautions that improper practices can cause injury or death. It defines signal words used for safety messages and explains various graphical symbols.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 175400095 and upolfjsekdmmes
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It explains that the owner is responsible for fully instructing operators on safe operation. It provides guidance on proper operation, inspection, and maintenance and cautions that improper practices can cause injury or death. It defines signal words used and various symbols.
Takeuchi tb28 fr mini excavator operator manual (serial no. 12820004 and up)ufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with general safety warnings and alerts the operator to read and understand all instructions to prevent injury or death. It provides precautions for preparing, starting, operating, stopping, transporting and maintaining the machine safely. Safety signs and their meanings are also explained. The manual instructs the operator to perform inspections daily and repair any issues before operating. It describes proper procedures for starting the engine, mounting and dismounting the machine, and operating controls from the operator's seat.
Takeuchi tb28 fr mini excavator operator manual (serial no. 12820004 and up)fdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with general safety warnings and alerts the operator to read and understand all instructions to prevent injury or death. It provides precautions for preparing, starting, operating, stopping, transporting and maintaining the machine safely. Safety signs and their meanings are also explained. The manual instructs the operator to perform inspections daily and repair any issues before operating. It describes proper procedures for starting the engine, mounting and dismounting the machine, and operating controls from the operator's seat.
Takeuchi tb1140 hydraulic excavator service repair workshop manual (serial no...usjekksemm
The document provides safety precautions and instructions for maintaining a machine. It outlines general hazards like fire, moving parts, and falling objects. Technicians should wear protective equipment, block the machine securely, and avoid risks from fuel, hot or pressurized parts. The document emphasizes stopping the engine and applying a "Do Not Operate" tag before starting any maintenance work.
Takeuchi tb295 w hydraulic excavator service repair workshop manual (serial n...usjekksemm
This manual provides instructions for engineers servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance, and troubleshooting. The manual notes important safety symbols and precautions for working on the machine, including wearing protective equipment, stopping the engine before working, and securing components when necessary. It also lists the sections contained in the manual, such as safety, service data, functions, and troubleshooting.
Takeuchi tb295 w hydraulic excavator service repair workshop manual (serial n...usjekksemm
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. The manual is intended for engineers who service the machine. It notes that directional terms like front, rear, left and right refer to the machine's orientation from the operator's seat. The manual outlines safety precautions, symbols used, and its structure which includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and other topics.
Takeuchi tb295 w hydraulic excavator parts catalogue manual (serial no. 19030...usjekksemm
This document provides a parts list for the travel drive and dozer blade components of a TB295W hydraulic excavator. It contains 47 items related to the travel drive system and 30 items related to the dozer blade assembly, listing the part numbers, descriptions, quantities, and other details for each component.
More Related Content
Similar to Takeuchi tb1140 hydraulic excavator operator manual serial no. 51400007 and up
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810005 and upfsjfksemmwse
The document provides safety instructions for operating a compact excavator. It warns that failure to understand the instructions can result in injury or death. It advises the operator to be fully trained on the machine's controls and functions before operating, and to learn controls in a safe area first before using the machine on a job site. The document outlines general safety precautions including wearing proper protective equipment, using hand signals, providing first aid kits and fire extinguishers, keeping safety guards secure, and avoiding fire and explosion hazards.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810005 and upfdjjjsekkskemm
This operator's manual provides safety instructions and information for operating a compact excavator. It warns that failure to understand and follow the instructions can result in injury or death. It outlines general safety precautions including wearing protective equipment, using signals, and not removing safety guards. Starting precautions include maintaining three points of contact, clearing the area, and starting from the operator's seat. Operating safely requires being aware of the work area, performing inspections, and not putting body parts at risk of being crushed or cut.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810675 and upfsjfksemmwse
The document provides safety instructions for operating a compact excavator. It warns that failure to understand the instructions can result in injury or death. It advises the operator to be fully trained on the machine's controls and functions before operating, and to learn controls in a safe area first before using the machine on a job site. The document outlines general safety precautions including wearing proper protective equipment, using hand signals, providing first aid kits and fire extinguishers, keeping safety guards secure, and avoiding fire and explosion hazards.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upfdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. The document provides explanations of safety signs and symbols used and then moves into sections about the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upfsjfksemmwse
This document provides an operator's manual for a compact excavator. It begins with warnings about the importance of reading and understanding the instructions to avoid injury or death. It then provides sections on safety precautions for preparing, starting, operating, stopping, transporting and maintaining the excavator. The document emphasizes following all safety rules, wearing proper protective equipment, using a fire extinguisher and first aid kit, never removing safety equipment, employing signal persons, locking the safety lock lever before leaving the seat, and avoiding fire and explosion hazards.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upfdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. It then describes the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment. The summary provides essential safety information for operating the compact excavator.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. The document provides explanations of safety signs and symbols used and then moves into sections about the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with warnings about the importance of reading and understanding the instructions to avoid injury or death. It then provides sections on safety precautions for preparing, starting, operating, stopping, transporting and maintaining the excavator. The document emphasizes following all safety rules, wearing proper protective equipment, using a fire extinguisher and first aid kit, never removing safety equipment, employing signal persons, locking the safety lock lever before leaving the seat, and avoiding fire and explosion hazards.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upfsjfksemmwse
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general machine operation, maintenance, and transportation. It then covers the controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment for the excavator. The manual stresses the importance of following all safety procedures to prevent injury when operating or working on the machine.
Takeuchi TB125 Compact Excavator Operator manual SN:12514526 and upfujfdjjsjkkmee
This is the most complete Operation and Maintenance Manual for the TAKEUCHI TB125 COMPACT EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your TAKEUCHI TB125 COMPACT EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of TAKEUCHI TB125 COMPACT EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Controls
Operation
Transport
Maintenance
Troubleshooting
Specifications
Options
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and upujjjjfkksekmmdm
This document provides an operator's manual for a hydraulic excavator. It begins with several warnings about reading the instructions to avoid injury or death. It then provides guidance on safe operation, including using proper protective equipment, following signals from signal persons, keeping safety equipment in place, and avoiding fire hazards. It also describes daily inspection and maintenance requirements and emergency exit procedures.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 175400095 and upujjjjfkksekmmdm
This document provides an operator's manual for a hydraulic excavator. It begins with several warnings about reading the instructions to avoid injury or death. It then provides information about operating safely, including using proper protective equipment, following signals, and keeping safety equipment in place. The document instructs operating within temperature ranges and stopping if any problems are found. It also includes sections about controls, operation, transport, maintenance, troubleshooting and specifications.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 175400095 and updfujskeksmefm
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It provides guidance on safe operation, inspection, maintenance and emergency procedures. Safety is the top priority when operating heavy machinery.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and upolfjsekdmmes
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It explains that the owner is responsible for fully instructing operators on safe operation. It provides guidance on proper operation, inspection, and maintenance and cautions that improper practices can cause injury or death. It defines signal words used for safety messages and explains various graphical symbols.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 175400095 and upolfjsekdmmes
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It explains that the owner is responsible for fully instructing operators on safe operation. It provides guidance on proper operation, inspection, and maintenance and cautions that improper practices can cause injury or death. It defines signal words used and various symbols.
Takeuchi tb28 fr mini excavator operator manual (serial no. 12820004 and up)ufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with general safety warnings and alerts the operator to read and understand all instructions to prevent injury or death. It provides precautions for preparing, starting, operating, stopping, transporting and maintaining the machine safely. Safety signs and their meanings are also explained. The manual instructs the operator to perform inspections daily and repair any issues before operating. It describes proper procedures for starting the engine, mounting and dismounting the machine, and operating controls from the operator's seat.
Takeuchi tb28 fr mini excavator operator manual (serial no. 12820004 and up)fdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with general safety warnings and alerts the operator to read and understand all instructions to prevent injury or death. It provides precautions for preparing, starting, operating, stopping, transporting and maintaining the machine safely. Safety signs and their meanings are also explained. The manual instructs the operator to perform inspections daily and repair any issues before operating. It describes proper procedures for starting the engine, mounting and dismounting the machine, and operating controls from the operator's seat.
Similar to Takeuchi tb1140 hydraulic excavator operator manual serial no. 51400007 and up (18)
Takeuchi tb1140 hydraulic excavator service repair workshop manual (serial no...usjekksemm
The document provides safety precautions and instructions for maintaining a machine. It outlines general hazards like fire, moving parts, and falling objects. Technicians should wear protective equipment, block the machine securely, and avoid risks from fuel, hot or pressurized parts. The document emphasizes stopping the engine and applying a "Do Not Operate" tag before starting any maintenance work.
Takeuchi tb295 w hydraulic excavator service repair workshop manual (serial n...usjekksemm
This manual provides instructions for engineers servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance, and troubleshooting. The manual notes important safety symbols and precautions for working on the machine, including wearing protective equipment, stopping the engine before working, and securing components when necessary. It also lists the sections contained in the manual, such as safety, service data, functions, and troubleshooting.
Takeuchi tb295 w hydraulic excavator service repair workshop manual (serial n...usjekksemm
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. The manual is intended for engineers who service the machine. It notes that directional terms like front, rear, left and right refer to the machine's orientation from the operator's seat. The manual outlines safety precautions, symbols used, and its structure which includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and other topics.
Takeuchi tb295 w hydraulic excavator parts catalogue manual (serial no. 19030...usjekksemm
This document provides a parts list for the travel drive and dozer blade components of a TB295W hydraulic excavator. It contains 47 items related to the travel drive system and 30 items related to the dozer blade assembly, listing the part numbers, descriptions, quantities, and other details for each component.
This document provides an overview and safety precautions for servicing a machine. It begins with directional terms used in the manual and explains the meaning of symbols. The manual consists of sections covering safety, service data, functions, disassembly/assembly, troubleshooting, and other topics. Safety precautions address proper clothing, installing safety equipment, placing warning signs, handling fluids and pressurized components, battery safety, and more. Cautions for working include preparing the work area, securing equipment, and cleaning parts.
This manual provides procedures for servicing a machine, including disassembly, assembly, inspection, maintenance, troubleshooting, maintenance reference values, and specifications. It is intended for trained engineers who service the machine. Safety precautions that must be followed when working on the machine are described, such as wearing protective equipment, stopping the engine before maintenance, and releasing pressure from hydraulic systems. The document outlines cautions to take when disassembling or assembling parts of the machine.
Takeuchi tb250 mini excavator service repair workshop manual (serial no. 1250...usjekksemm
This manual provides instructions for servicing a machine. It describes procedures for disassembly, assembly, inspection, maintenance and troubleshooting. Refer to this manual during work to improve service. The manual structure includes sections on safety, service data, functions, disassembly/assembly, troubleshooting and the engine.
Takeuchi tb228 mini excavator service repair workshop manual (serial no. 1228...usjekksemm
This document provides safety information and precautions for engineers servicing a machine. It describes safety symbols used in the manual and alerts the reader to take precautions such as wearing protective gear, placing safety signs, and stopping the engine before performing maintenance. The manual structure is also outlined.
Takeuchi tb219 mini excavator service repair workshop manual (serial no. 1219...usjekksemm
This document provides safety guidelines for engineers servicing machinery. It describes proper protective equipment, preparing the work area, securing the machine when work is being done, and maintaining control of fuel and heavy components. Engineers are instructed to stop the engine before performing maintenance and keep clear of moving parts like fans and belts. Unauthorized people are prohibited from the work area and signs should be posted to prevent accidental starting of the machine.
Takeuchi tb216 mini excavator service repair workshop manual (serial no. 2161...usjekksemm
This document provides safety information and guidelines for servicing a machine. It begins by explaining the purpose of the manual and defining directional terms. It then discusses control of the manual, symbols used, and the manual's structure. The bulk of the document outlines various safety precautions to take, such as wearing protective gear, installing safety equipment, using correct tools, and stopping the engine before performing maintenance.
Takeuchi tb216 mini excavator service repair workshop manual (serial no. 2160...usjekksemm
This document provides safety information and guidelines for servicing a machine. It begins by explaining the directional terms used in the manual and importance of including the machine's serial number. It then outlines symbols used and the manual's structure. The first section discusses safety, including wearing protective equipment, installing safety equipment, placing warning signs, using correct tools, replacing worn parts, and other precautions to take when working on the machine.
Takeuchi tb215 r mini excavator service repair workshop manual (serial no. 21...usjekksemm
This document provides safety information and guidelines for servicing a machine. It outlines various safety precautions including wearing protective equipment, installing safety equipment like fire extinguishers, using proper tools, and stopping the engine before performing maintenance. Detailed directions are given for specific maintenance tasks to prevent injuries from moving parts, falling, and other hazards.
Takeuchi tb210 r mini excavator service repair workshop manual (serial no. 21...usjekksemm
This manual provides instructions for servicing a machine. It describes disassembly, inspection, maintenance and troubleshooting procedures. The manual includes safety symbols and definitions, as well as safety precautions to follow when working on the machine, such as wearing protective equipment, using the correct tools, and stopping the engine before performing maintenance. The structure of the manual is also outlined.
Doosan dl550 5 wheel loader service repair manualusjekksemm
The document provides instructions and specifications for servicing and maintaining the engine of a DL550-5 wheel loader, including:
- Safety warnings to read all instructions before operating or servicing the machine.
- An overview of the engine components and layout.
- Tables listing tightening torques for a range of engine components like cylinder heads, main bearings, oil pans, filters, manifolds and more. Precise torques are given with notes on reuse limits and multi-stage tightening procedures where needed.
- Images and diagrams illustrating components mentioned in the tables.
Doosan dl420 3 wheel loader service repair manualusjekksemm
The document is a shop manual that provides safety, specification, maintenance, and repair instructions for a Doosan DL420-3 wheel loader. It includes sections on safety procedures, engine specifications and maintenance, drivetrain systems, hydraulics, electrical systems, and other components. Tables provide specifications for the engine, tightening torques for fasteners, and a list of applicable wheel loader models covered by the manual. The manual aims to provide operators and technicians with the information needed to safely operate and service the machine.
Doosan dl200 3 wheel loader service repair manualusjekksemm
This document provides safety instructions for wheel loaders. It discusses general safety practices for operation and maintenance, as well as safety related to transportation, operation, and maintenance. Operators must read and understand all safety instructions and manuals before operating equipment. Only trained personnel should operate and maintain wheel loaders.
Daewoo doosan mega 400 v 400 v wheel loader service repair manual (serial num...usjekksemm
This document is a shop manual for the Mega 400-V wheel loader that provides safety information, specifications, maintenance procedures, and component information. It includes sections on safety practices and precautions, specifications for the Mega 400-V, general maintenance procedures, maintenance of various components, hydraulic and electrical systems, and attachments. Safety is emphasized throughout with warnings about potential hazards and recommended safety procedures.
Daewoo doosan mega 300 v 300 v wheel loader service repair manualusjekksemm
The document provides safety information for operating a Daewoo wheel loader, including locations of safety labels, unauthorized modifications, general hazards, safe operating procedures before starting the engine, during operation, maintenance, battery safety, towing, and shipping/transportation. Operators and maintenance personnel are instructed to read the manual thoroughly before use to avoid accidents and injury.
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Takeuchi tb1140 hydraulic excavator operator manual serial no. 51400007 and up
1. OPERA TOR’S MANUAL
Read and understand these instructions.
Failure to do so can cause injury or death.
WARNING
OPERATOR’SMANUAL
E
TB1140
TB1140
Book No. AN2E003
Serial No.514200001~
Hydraulic Excavator
Original instructions
2. SAFETY ALERT SYMBOL
This symbol means Attention! Be Alert! Your Safety Is Involved.
The message that follows the symbol contains important infor-
mation about safety.
Read and understand the message to avoid personal injury or
death.
� It is the owner or employer’s responsibility to fully instruct each operator in
the proper and safe operation of all equipment. All persons using this machine
should thoroughly familiarize themselves with the following sections.
� All operators must be instructed on the proper functions of the excavator before
running the machine.
� Learn and practice correct use of the machine controls in a safe, clear area
before operating this machine on a job site.
CAUTION
Improper operation, inspection and maintenance of this ma-
chine can cause injury or death.
Read and understand this manual before performing any op-
eration, inspection or maintenance on this machine.
� Always store this manual near at hand preferably on the machine itself. If it
should be lost or damaged, immediately order a new one from your Takeuchi
dealer.
When transferring ownership of this machine, be sure to provide this manual to
the next owner.
� Takeuchi supplies machines complying to the local regulations and standards
of the country of export. If your machine has been purchased in another country
or from a person or company of another country, it may not have the safety
devices or safety standards required for use in your country. Should you have
any question about whether your machine complies with the regulations and
standards of your country, contact a Takeuchi dealer.
� Please note that the contents and diagrams included in this manual may not
match your machine exactly.
3. 1
It is your responsibility to observe all pertinent laws and regulations and to follow the
manufacturer’s instructions on machine operation, inspection and maintenance.
Virtually all accidents occur as the result of a failure to observe basic safety rules and
precautions. An accident can often be avoided by recognizing potentially hazardous situations
beforehand. Read and understand all of the safety messages which explain how to prevent
these accidents from occurring. Do not operate the machine until you are sure that you have
gained a proper understanding of its operation, inspection and maintenance.
�SlGNAL WORDS
Safety messages appearing in this manual and on machine decals are identified by the words
“DANGER”, “WARNING” and “CAUTION”. These signal words mean the following:
IMPORTANT: The word “IMPORTANT” is used to alert against operators and
maintenance personnel about situations which can result in possible damage to the
machine and its components.
It is impossible to foresee every possible circumstance that might involve a potential hazard.
The warnings in this manual or on the machine can not cover all possible contingencies. You
must exercise all due care and follow normal safety procedures when operating the machine
so as to ensure that no damage occurs to the machine, its operators or other persons.
The word “DANGER”
indicates an imminently
hazardous situation
which, if not avoided,
can result in serious
injury or death.
The word “WARNING”
indicates a potentially
hazardous situation
which, if not avoided,
could result in serious
injury or death.
The word “CAUTlON”
indicates a potentially
hazardous situation
which, if not avoided,
may result in minor or
moderate injury.
DANGER WARNING CAUTION
�EXPLANATION OF GRAPHICAL SYMBOLS
Following is an explanation of symbols used in this manual.
, X..........prohibition
..............Lock
.............Unlock
4. 2
�Serial numbers
Check the serial numbers of the machine
and the engine and write them in the spaces
provided below.
Machine number :
Engine number :
Foreword
This manual describes operation, inspection
and maintenance of the machine, as well
as safety instructions to be heeded during
these operations.
Ifyouhaveanyquestionsaboutthemachine,
please contact a Takeuchi sales or service
outlet.
INTRODUCTION
�Manual storage compartment
A compartment for storing this manual
is provided at the position shown on the
diagram below.
1. Open the cover behind the seat.
2. After using the manual, place it in the
plastic pouch and store it back in the
manual storage compartment.
5. 3
�Front, rear, Ieft and right
This manual refers the front, rear, left and
right of the machine as seen when sitting
in the operator’s seat with the dozer blade
visible to the front.
�Designated operations
Use this machine primarily for the following
operations:
� Excavating
� Digging ditches
� Digging side ditches
� Leveling
� Loading
�Features
� Automatic travel shift-down system.
� Isolation mounted cab minimizes vibration.
� Short pitch rubber crawler.
� Low engine noise and exhaust emissions.
� Electro over hydraulic control of auxiliary hydraulic circuit.
� One touch engine deceleration button.
� Engine emergency stop/idle system.
� Travel motor are equipped with shock less valves for smooth starts and stops.
�Break-in period
When the machine is new, heed the instructions below when operating the machine for the first
100 hours (as indicated on the hour meter).
Using a new machine roughly without breaking it in will lead to quicker deterioration of machine
performance and may shorten the machine’s service life.
� Warm up the engine and hydraulic oil sufficiently.
� Avoid heavy loads and rapid operations. Operate with a load of about 80% the maximum
load.
� Do not start up, accelerate, change directions, or stop abruptly unless necessary.
MACHINE DESCRIPTlON
E3A020
FRONT
LEFT RIGHT
REAR
Dozer blade
8. SAFETY
8
General Precautions
Observe all safety rules
� Operation, inspection and maintenance
of this machine must be performed only
by a trained and qualified person.
� All rules, regulations, precautions and
safety procedures must be understood
and followed when performing operation,
inspection and maintenance of this
machine.
� Do not perform any operation, inspection
and maintenance of this machine when
under the adverse influence of alcohol,
drugs, medication, fatigue, or insufficient
sleep.
When a problem is found on the
machine
If any problem (noise, vibration, smell,
disorder of instrument, smoke, oil leak or
wrong indication of alarm and panel, etc.) is
detected during the operation or inspection
and maintenance of the machine, please
inform the administrator and take proper
actions. Do not operate the machine until
the trouble is cleared.
Operating temperature range
To maintain the performance of machine and
to prevent it from early wear, observe the
following operating conditions.
� Do not operate the machine if the ambient
temperatureishigherthan+45°C(+113°F)
or lower than –15°C (+5°F).
• If operated at an ambient temperature
of higher than +45°C (+113°F), the
engine may overheat and cause the
engine oil to degrade.
• If operated at an ambient temperature
of lower than –15°C (+5°F), the parts
made of rubber such as gaskets may
get hardened to cause an early wear or
damage to the machine.
• If the machine is to be used outside the
ambient temperature range described
above, consult your sales or a service
dealer.
Wear appropriate clothing and
personal protective equipment
� Do not wear loose clothing or any
accessory that can catch on controls or in
moving parts.
� Do not wear oily or fuel stained clothing
that can catch fire.
� Wear a hard hat, safety shoes, safety
glasses, filter mask, heavy gloves, ear
protectionandotherprotectiveequipment
as required by job conditions. Wear
required appropriate equipment such as
safety glasses and filter mask when using
grinders, hammers or compressed air, as
metal fragments or other objects can fly
and cause serious injury.
� Use hearing protection when operating
the machine. Loud prolonged noise can
cause hearing impairments, even the total
loss of hearing.
9. SAFETY
9
General Precautions
Use a signal person and flagman
Know and use the hand signals required for
particular jobs and make sure who has the
responsibility for signaling.
� All personnel must fully understand all the
signals.
� The operator shall respond to signals only
from the appointed signal person, but
shall obey a stop signal at any time from
anyone.
� The signal person must stand in a clearly
visible location when giving signals.
Provide a fire extinguisher and
first aid kit
� Know where a fire extinguisher and first
aid kit are located and understand how to
use them.
� Know how to contact emergency
assistance and first aid help.
Never remove safety equipment
� Make sure all protective guards, canopies,
doors,etc.,areinplaceandsecure.Repair
or replace damaged components before
operating the machine.
� Know how to use the safety lock lever,
seat belt and other safety equipment and
use them properly.
� Never remove any safety equipment
except for service. Keep all safety
equipment in good operating condition.
10. SAFETY
10
General Precautions
Avoid fire and explosion hazards
Keep flames away from fuel, hydraulic fluid,
oil, grease and antifreeze. Fuel is particularly
flammable and dangerous.
� When handling these combustible
materials, keep lit cigarettes, matches,
lighters and other flames or sources of
flames away.
� Do not smoke or permit open flames while
fueling or near fueling operations.
� Never remove the fuel cap or refuel with
the engine running or hot. Never allow fuel
to spill on hot machine components.
� Cleanupspilledfuel,oilorotherflammable
fluids immediately.
� Check for fuel, oil or hydraulic fluid leaks.
Stop all leaks and clean the machine
before operating.
� Do not cut or weld on pipes or tubes that
containflammablefluids.Cleanthoroughly
with nonflammable solvent before cutting
or welding.
� Remove all trash or debris from the
machine. Make sure that oily rags or other
flammable material are not stored on the
machine.
� Handle all solvents and dry chemicals
according to procedures identified on
manufacturers’ containers. Work in a well-
ventilated area.
� Never use fuel for cleaning purposes.
Always use a nonflammable solvent.
� Store all flammable fluids and materials in
a safe and well-ventilated place.
Be sure to lock the safety lock
lever before leaving the operator’s
seat
� Before leaving the operator’s seat, raise
the safety lock lever to engage the lock
and stop the engine. If any controls should
be touched accidentally when the safety
lock lever is lowered, the machine will
move suddenly, and cause serious injury
or death.
� Before leaving the operator’s seat, lower
the working equipment, raise the safety
lock lever to engage the lock, and stop
the engine. Also, be sure to remove the
key and take it with you.
11. SAFETY
11
General Precautions
Be careful not to get crushed or
cut
Never put your hands, feet or other parts
of your body between the upperstructure
and the undercarriage or tracks, between
the machine body and working equipment,
or between a cylinder and moving part.
The size of these gaps change when the
machine moves and if caught a person can
suffer severe injury or death.
Using optional products
� Consult with a Takeuchi before installing
optional attachments.
� Do not use attachments that have not
been approved by Takeuchi. Doing so
may compromise safety or adversely
affect the machine’s operation or service
life.
� Takeuchi will not be held responsible for
any injuries, accidents or damage to its
products caused by the use of a non-
approved attachment.
Never modify the machine
Unauthorized modifications to this machine
can cause injury or death. Never make
unauthorized modifications to any part of
this machine.
Exhaust fumes from the engine
can kill
� Do not operate the engine in an enclosed
area without adequate ventilation.
� If natural ventilation is poor, install
ventilators, fans, exhaust extension pipes
or other artificial venting devices.
Handling asbestos dust
Inhaling asbestos dust has been linked to
lung cancer. When handling materials which
may contain asbestos, take the following
precautions:
� Never use compressed air for cleaning.
� Avoid brushing or grinding of the
materials.
� For clean up, use wet methods or a
vacuum equipped with a high efficiency
particulate air (HEPA) filter.
� Wear an approved respirator if there is
no other way to control the dust. When
working indoors, install a ventilation
system with a macro molecular filter.
12. SAFETY
12
Preparing Precautions
Know the working area
Before starting operation, know the working
area to ensure safety.
� Check the topography and ground
condition of the working area, or the
structure of the building when working
indoors, and take the necessary safety
measures in dangerous spots.
� Noteandavoidallhazardsandobstructions
such as ditches, underground lines, trees,
cliffs, overhead electrical wires or areas
where there is danger of a slide.
� Check with the local utilities for the
locations of buried gas and water pipes
and buried power cables. Determine
jointly what specific precautions must be
taken to insure safety.
� When working on roads, be sure to take
into account the safety of pedestrians and
vehicles.
• Use a flagman and/or signals.
• Fence off the working area and prohibit
entry to unauthorized persons.
� Whenworkinginwaterorcrossingshallow
streams or creeks, check the depth of the
water, the solidity of the ground, and the
speed of the current beforehand. Make
sure the water is not deeper than the
allowable depth.
Refer to the section titled “Cautions on
Operating” for further instructions.
Alway keep the machine clean
� Clean windows, mirrors and lights to
ensure good visibility.
� Wipe off any oil, grease, mud, snow or ice,
to prevent accidents due to slipping.
� Remove all loose objects stored in the
machine and all objects which do not
belong in or on the machine and its
equipment.
� Remove any dirt, oil or grease from the
engine area, to prevent fires.
� Clean the area around the operator’s seat,
removing any potential obstacles.
13. SAFETY
13
Preparing Precautions
Perform inspection and
maintenance daily
Failuretonoticeorrepairmachineirregularities
or damage can lead to accidents.
� Before operating, perform the prescribed
inspectionsandmakerepairsimmediately
should any irregularities be found.
� If a failure that causes loss of control such
as steering, service brakes or engine
occurs, stop the machine motion as
quickly as possible, follow the shutdown
procedure, and keep machine securely
parked until the malfunction is corrected.
Cautions in the operator’s
compartment
� Remove mud and grease from shoe
soles before entering the operator’s
compartment.
Pedaling the machine with the shoes
with mud and grease will cause a slip
accident.
� Do not leave the parts or tools around the
operator’s seat.
� Do not leave any plastic bottles in the
operator’s compartment or attach any
suction cups on the window glass. The
plastic bottle or suction cup act as a lens
and can cause fire.
� Do not use the mobile phone during
traveling or working.
� Do not bring combustibles or explosives
into the operator’s compartment.
Emergency Exit
If you should become trapped inside the
cab, remove the rear window to get out.
In case of emergency
1. Pull off ring (A) and remove the tip of the
rubber wedge.
2. Grasp the tip, pull, and remove the entire
rubber wedge.
3. Kick off the rear window. Note that the
glass may break. Be careful not to get
injured.
� After smoking, be sure to tightly close the
lid of the ashtray to put out the match or
cigarette.
� Do not leave the cigarette lighter in the
operator’s compartment. When the
room temperature rises, the lighter may
explore.
14. SAFETY
14
Starting Precautions
Maintain three point contact when
mounting and dismounting
� Do not jump on or off the machine. Never
attempt to mount or dismount a moving
machine.
� When mounting and dismounting the
cab, first open the door fully to the locked
position and check that it does not move.
(For machines with cabs)
� Always face the access system and
maintain a three point contact with the
recommended handrails and steps while
getting on and off the machine. Keep
steps and platform clean.
� Never use the safety lock lever or control
levers as hand holds.
Clear the area of other persons
before starting the machine
Do not start the engine until you are sure it
is safe. Before starting, check or perform the
following.
� Walk around the machine and warn all
personnel who may be servicing the
machine or are in the machine path. Do
not start until all personnel are clearly
away from the machine.
� Check for any “DO NOT OPERATE” tags
or similar warning notices on the cab door,
controls or starter switch.
� Sound horn to alert everyone around the
machine.
Start the engine from the
operator’s seat
� Adjust, secure and latch the operator’s
seat.
� Fasten the seat belt.
� Check that the parking device is applied
and place all controls in the neutral
position.
� Check that the safety lock lever is in the
lock position.
� Clear the area of all persons.
� Start and operate the engine from the
operator’s seat only.
� Never attempt to start the engine by
shorting across the starter terminals.
15. SAFETY
15
Starting Precautions
Starting with jumper cables
Use jumper cables only in the recommended
manner. Improper use of jumper cables can
result in battery explosion or unexpected
machine motion.
Refer to the section titled “If the Battery
Goes Dead” for proper instructions.
After starting the engine
After starting the engine, perform the
following operations and checks in a safe
place with no persons or obstacles in the
area. If any malfunctions are found, follow
the shutdown procedure and report the
malfunction.
� Warm up the engine and hydraulic fluid.
� Observeallgaugesorwarninginstruments
for proper operation.
� Listen for unusual noises.
� Test engine speed control.
� Operate each control to insure proper
operation.
In cold weather
� Be careful of slippery conditions on
freezing ground, steps and hand holds.
� In severe cold weather, do not touch any
metal parts of the machine with exposed
flesh, as flesh can freeze to the metal and
Cause injury.
� Do not use ether or starting fluids on this
engine. These starting aids can cause
explosion and serious injury or death.
� Warm up the engine and hydraulic fluid
before operating.
16. SAFETY
16
Operating Precautions
Ensure good visibility
� When working in dark places, turn on the
machine’s working lights and headlights
and/or provide extra stationary lighting if
necessary.
� When visibility is poor due to severe
weather (fog, snow or rain), stop operating
the machine and wait until conditions
improves.
Do not permit riders on the
machine
� Do not allow anyone to ride on any part of
the machine at any time while traveling.
� Do not allow anyone to be on any part of
the machine while operating.
Check for safety in the
surrounding area before starting
� Understand the machine limitations.
� Use a signal person where clearances are
close or your vision is obstructed.
� Never allow anyone to enter the slewing
(swing) radius and machine path.
� Signal your intention to move by sounding
the horn.
� There is a blind spot in the rear of the
machine.
Before traveling in reverse, check that the
area is safe and clear.
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. SAFETY
17
E4A040
Operating Precautions
Check the position of the
undercarriage (tracks) before
traveling
Before operating the travel levers, check
to make sure that the dozer blade is to the
front oft he operator’s seat. BE AWARE that
when the dozer blade is to the rear of the
operator’s seat, the travel levers operate in
the opposite direction to when the dozer
blade is in the front.
Travel safety
� Travel with the dozer blade up, the hoe
attachment folded as shown on the
diagram, and the bucket raised 30 to 40
cm (12 to 16 in.) from the ground.
� Note that when the bucket is operated
while making a right pivot turn (i.e., when
only the left crawler is turning), the speed
of the pivot turn may suddenly increase.
(12 to 16 in.)
� Do not slew (swing) while traveling. If
you must operate the hoe attachment
while traveling, operate at speeds slow
enough so you have complete control at
all times.
� When a load greater than a set value is
applied during 2nd speed (high speed)
travel, the speed will automatically
slow down by switching to 1st speed
(low speed). Thereafter, when the load
becomes lighter, the speed will increase
by returning to 2nd speed (high speed).
Exercise due caution since the travel
speed changes automatically.
� Avoid crossing over obstacles whenever
possible. If you must do so, keep the hoe
attachment close to the ground and travel
slowly. Never cross obstacles if they will
seriously tilt the machine (to an angle of
10° or greater).
� Onunevenground,travelatlowspeedand
avoid accelerating, stopping or changing
directions abruptly.
� When roading a machine, know and use
the signaling devices required on the
machine. Provide an escort for road travel
when required.
19. SAFETY
18
Operating Precautions
Cautions on traveling on slopes
When traveling on slopes or grades, be
careful that the machine does not tip (roll)
over or slide.
� Never exceed the machine’s stability
capabilities (maximum gradeability – 35°,
lateral tipping angle – 15°). Also note that
when actual working area conditions are
poor the machine’s stability capabilities
may be lower.
� When traveling on slopes or grades, lower
the bucket to a height of 20 to 30 cm (8
to 12 in.) off the ground. In emergencies,
lower the bucket to the ground and stop
the machine.
� When traveling on slopes or grades, move
slowly in first gear (low speed).
� Do not travel down slopes in reverse.
� Ongrass,deadleaves,wetmetalorfrozen
surfaces, the machine may slide sideways
even on very gentle slopes. Make sure
the machine never faces sideways with
respect to the slope.
� Do not change directions or cross slopes
sideways. First return to a flat surface then
redirect the machine.
Operate on snow or ice with extra
care
� Whentravelingonsnoworfrozensurfaces,
keep the machine travel speed down and
avoid accelerating, stopping or changing
directions abruptly.
� Remember that the road shoulder, fences,
etc., may be buried in the snow and not
visible.
� Lower the dozer blade when parked on
unsure ground conditions.
Do not move the bucket over the
heads of people
Moving the bucket over the heads of people
entails the danger of the load spilling or the
sudden dropping of the bucket.