The document provides specifications and clearance data for F4HE series engines, including:
- General specifications such as number of cylinders, bore, stroke, displacement, valve timing, fuel injection details.
- Clearance measurements for cylinder block, crankshaft, pistons, and pins.
- Lubrication system specifications such as oil pressure ranges and capacities.
- Cooling system details like water pump type, thermostat temperature range.
Steyr f4 he9484 engine service repair manualfusjejfjskekme
This document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for various engine models. It includes sections on electrical power systems, engines and related components like fuel injection systems, as well as other subsystems. Safety rules and precautions for working on engines are also outlined. Special tools required for different engine models are listed.
New holland s3 l2 engine service repair manualfjskekfsemmwe
This document is a service manual for the S3L2 engine. It provides contents and introduction sections that outline safety rules for working on engines, basic instructions, specifications for biodiesel fuels and welding, and product identification. The manual describes specifications, maintenance, and service procedures to properly maintain engine performance and ensure safe operation.
New holland s3 l2 engine service repair manual instant downloadufjjskekmmdm
This service manual section provides information on servicing the engine and crankcase of the S3L2 engine. It includes technical specifications, an overview of engine components, torque specifications, troubleshooting information, and procedures for measuring the crankcase and checking compression pressure. The engine is a 3-cylinder, water-cooled, 4-stroke cycle diesel with overhead valves and a displacement of 1.3L.
John deere 425 lawn garden tractor service repair manualfjjskekdm
This technical manual provides service and repair information for John Deere lawn and garden tractors models 425, 445, and 455. The manual is published by John Deere and is intended for experienced technicians. It contains sections on general diagnostic information, specifications, electrical systems, components, troubleshooting charts, theory of operation, and repair procedures. Safety warnings are provided throughout and technicians should take proper precautions when working with these machines.
John deere 445 lawn garden tractor service repair manualfjskemdme
This technical manual provides service and repair information for John Deere lawn and garden tractors models 425, 445, and 455. The manual is published by John Deere and is intended for experienced technicians. It contains sections on general diagnostic information, specifications, electrical systems, components, troubleshooting charts, theory of operation, and repair procedures. Safety practices are emphasized throughout.
John deere 455 lawn garden tractor service repair manualfjskedsxmmem
This document is a technical manual for John Deere lawn and garden tractors models 425, 445, and 455. It provides sections on general diagnostic information, specifications, electrical wiring diagrams, component locations, troubleshooting charts, and repair procedures to assist experienced technicians in servicing these tractors. Safety precautions are outlined for handling fluids, batteries, pressurized lines, and following proper service procedures.
Case ih farmall 105 u ep tractor service repair manualjfdjjskekksemm
The document provides specifications for the engines used in Case IH Farmall 95U, 105U, and 115U tractors. The engines are 4-cylinder diesel engines with direct fuel injection. Key specifications include displacement of 3400 cm3, compression ratio of 17:1, maximum power outputs ranging from 73 kW to 84 kW, and peak torque values ranging from 407 Nm to 461 Nm. Additional details are provided on engine components and systems like cooling, lubrication, and timing.
Doosan mega 160 wheeled loader parts catalogue manualfjjskekfsem
The document provides a parts list and exploded diagram of a cylinder head assembly. It lists over 100 individual part numbers, descriptions, quantities, serial numbers and replacement part information. The cylinder head assembly drawing shows the main components which include the cylinder head, valves, guides, seats, plugs and related mounting hardware.
Steyr f4 he9484 engine service repair manualfusjejfjskekme
This document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for various engine models. It includes sections on electrical power systems, engines and related components like fuel injection systems, as well as other subsystems. Safety rules and precautions for working on engines are also outlined. Special tools required for different engine models are listed.
New holland s3 l2 engine service repair manualfjskekfsemmwe
This document is a service manual for the S3L2 engine. It provides contents and introduction sections that outline safety rules for working on engines, basic instructions, specifications for biodiesel fuels and welding, and product identification. The manual describes specifications, maintenance, and service procedures to properly maintain engine performance and ensure safe operation.
New holland s3 l2 engine service repair manual instant downloadufjjskekmmdm
This service manual section provides information on servicing the engine and crankcase of the S3L2 engine. It includes technical specifications, an overview of engine components, torque specifications, troubleshooting information, and procedures for measuring the crankcase and checking compression pressure. The engine is a 3-cylinder, water-cooled, 4-stroke cycle diesel with overhead valves and a displacement of 1.3L.
John deere 425 lawn garden tractor service repair manualfjjskekdm
This technical manual provides service and repair information for John Deere lawn and garden tractors models 425, 445, and 455. The manual is published by John Deere and is intended for experienced technicians. It contains sections on general diagnostic information, specifications, electrical systems, components, troubleshooting charts, theory of operation, and repair procedures. Safety warnings are provided throughout and technicians should take proper precautions when working with these machines.
John deere 445 lawn garden tractor service repair manualfjskemdme
This technical manual provides service and repair information for John Deere lawn and garden tractors models 425, 445, and 455. The manual is published by John Deere and is intended for experienced technicians. It contains sections on general diagnostic information, specifications, electrical systems, components, troubleshooting charts, theory of operation, and repair procedures. Safety practices are emphasized throughout.
John deere 455 lawn garden tractor service repair manualfjskedsxmmem
This document is a technical manual for John Deere lawn and garden tractors models 425, 445, and 455. It provides sections on general diagnostic information, specifications, electrical wiring diagrams, component locations, troubleshooting charts, and repair procedures to assist experienced technicians in servicing these tractors. Safety precautions are outlined for handling fluids, batteries, pressurized lines, and following proper service procedures.
Case ih farmall 105 u ep tractor service repair manualjfdjjskekksemm
The document provides specifications for the engines used in Case IH Farmall 95U, 105U, and 115U tractors. The engines are 4-cylinder diesel engines with direct fuel injection. Key specifications include displacement of 3400 cm3, compression ratio of 17:1, maximum power outputs ranging from 73 kW to 84 kW, and peak torque values ranging from 407 Nm to 461 Nm. Additional details are provided on engine components and systems like cooling, lubrication, and timing.
Doosan mega 160 wheeled loader parts catalogue manualfjjskekfsem
The document provides a parts list and exploded diagram of a cylinder head assembly. It lists over 100 individual part numbers, descriptions, quantities, serial numbers and replacement part information. The cylinder head assembly drawing shows the main components which include the cylinder head, valves, guides, seats, plugs and related mounting hardware.
Doosan e85 compact excavator parts catalogue manualfjjskekfsem
This document contains a parts list and descriptions for a cylinder block assembly. It lists 31 individual parts that make up the cylinder block including the block itself, plugs, bolts, bushes, pins, and other components. It provides the part number, description, quantity, and other identifying information for each part.
Doosan e80 compact excavator parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of an engine, including the cylinder block, gear housing, flywheel housing, oil pan, cylinder head, suction manifold, exhaust manifold, camshaft, crankshaft, pistons, and lubrication oil system. It lists part numbers, descriptions, quantities, and other identifying information for over 50 individual parts across 18 figures.
Doosan e63 compact excavator parts catalogue manualfjjskekfsem
This document provides a parts list and descriptions for various components of an engine, including:
- The cylinder block assembly and related plugs and bolts.
- The gear housing, oil pump, seals, bolts, and covers.
- The flywheel housing, oil pan, seals, and bolts.
- The cylinder head, valves, springs, seals, bolts, and related components.
- The intake manifold, sensors, bolts, and throttle body.
- The exhaust manifold, sensors, bolts, pipes, and EGR components.
- The DPF muffler, sensors, case, bolts, pipes, and brackets.
-
Doosan e55 w compact excavator parts catalogue manualfjjskekfsem
This document contains figures and part numbers for various engine components of an E55W engine, including the cylinder block, gear housing, flywheel housing, cylinder head, intake manifold, exhaust manifold, cam shaft, crank shaft, piston, lubrication oil system, and cooling water system. It provides exploded diagrams of the components with corresponding part numbers, descriptions, and quantities for each part.
Doosan dl420 a wheeled loader parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of a diesel engine. It includes lists of parts, part numbers, descriptions and quantities for items like the cylinder block, timing gear case, flywheel housing, driving system, cylinder head, cylinder head cover, and timing system. Serial numbers are provided for some replaceable parts.
Doosan dl200 tc wheeled loader parts catalogue manualfjjskekfsem
This document provides a parts list and diagrams for the cylinder head and related components of a diesel engine. It includes images and lists of parts with descriptions, part numbers, quantities, serial numbers and replacement part information. The list contains over 80 individual part items or assemblies that make up the cylinder head, valves, springs, guides, cover, gaskets and related hardware.
Doosan 460 plus tier 3 skid steer loader parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of a diesel engine, including the cylinder block, gear housing, flywheel housing, cylinder head, intake manifold, exhaust manifold, cam shaft, crank shaft, piston, lubrication oil system, and cooling water system. It provides part numbers, descriptions, quantities, and other identifying information for over 50 individual parts across these various engine systems.
Daewoo doosan solar 500 lc v (500lcv) crawler excavator parts catalogue manualfjjskekfsem
The document provides a parts list for a muffler assembly, listing part numbers, descriptions, and quantities. It details different muffler sub-assembly and muffler part numbers used over different serial number ranges. Replacement part numbers are also provided where applicable.
Daewoo doosan solar 470 lc v crawler excavator parts catalogue manualfjjskekfsem
This document provides a parts list for a main frame assembly. It includes 3 frames, 2 weights, bolts, washers, brackets, and other minor parts. Serial numbers and replacement part numbers are provided for some items. A second similar document then lists parts for an engine mounting assembly, including an engine, radiator, hoses, mounts, brackets, and fasteners.
Daewoo doosan solar 450 lc v crawler excavator parts catalogue manualfjjskekfsem
The document provides a parts list and descriptions for a cylinder block assembly. It lists over 150 individual parts that make up the cylinder block, including the cylinder block itself, bearing caps, bolts, plugs, seals, switches, pipes, flanges, nozzles, brackets, and other miscellaneous parts. It provides the part numbers, descriptions, and quantities for each part.
New holland l228 tier 4 b (final) skid steer loader service repair manual [nf...fjjskekfsem
This document is a service manual for Tier 4B (final) and Stage IV 200 Series Skid Steer Loaders and Compact Track Loaders, including the L221, L228, C227, and C232 models. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety rules regarding ecology and the environment are also included. The manual provides repair and maintenance instructions to be carried out by qualified dealership personnel using the specified tools and procedures.
New holland cr10.90 combine harvesters service repair manualfjjskekfsem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections on the various systems of the combines, including the engine, transmission, hydraulic systems, electrical systems, attachments and more. The manual provides repair and maintenance information to technicians working on these agricultural machines.
New holland cx6080 tier 3 combine harvester service repair manualfjjskekfsem
This document is a service manual for CX5000 and CX6000 series machines. It contains sections on hydraulic, pneumatic, electrical and electronic systems, engines and emissions control, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, crop processing, feeding, threshing, separating, cleaning, storing, unloading and fault codes. The manual provides technical data, functional descriptions, diagnostics and service procedures for components and systems.
New holland cr9.90 combine harvesters service repair manualfjjskekfsem
This document is a service manual for various combine harvester models from CNH Industrial. It contains an overview of the components covered in the manual, including the engine, transmissions, axles, brakes, hydraulics, steering, tracks, climate control, and electrical systems. The manual is organized by component group and provides part numbers to identify replacement parts.
New holland cx6080 cx6090 tier 4 combine harvester service repair manualfjjskekfsem
This document is a service manual for CX5000 and CX6000 series machines. It contains sections on hydraulic, pneumatic, electrical and electronic systems, engines and emissions control, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, crop processing, feeding, threshing, separating, cleaning, storing, unloading and fault codes. The manual provides technical data, functional descriptions, diagnostics and service procedures for components and systems.
New holland cx7.80 combine harvesters service repair manualfjjskekfsem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections organized by technical system covering the engine, transmission, hydraulics, electrical systems, attachments and more. Safety information is provided at the beginning regarding accident prevention and fluid power system requirements.
New holland cr9090 elevation combine harvesters service repair manualfjjskekfsem
The hydraulic system uses a variable displacement pump to power the work functions and steering. Oil is distributed through the main frame and straw elevator stack valves to cylinders and motors. It returns through filters to the pump and reservoir shared with the hydrostatic system. The pump receives charge pressure from the hydrostatic return oil to operate without a separate charge pump.
New holland c227 stage iv compact track loader service repair manual [ndm4718...fjjskekfsem
This document is a service manual for Tier 4B (final) and Stage IV 200 Series Skid Steer Loaders and Compact Track Loaders, including the L221, L228, C227, and C232 models. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety rules regarding ecology and the environment are also included. The manual provides repair and maintenance instructions to be carried out by qualified dealership personnel using the specified tools and procedures.
Caterpillar cat 903 d compact wheel loader (prefix mzy) service repair manual...fjjskekfsem
This service manual document provides instructions for removing and installing various components on a 903D Compact Wheel Loader, including:
1) The steering frame lock, which must be connected before working on the machine to prevent frame movement.
2) The hydraulic tank, which requires draining fluid and removing numerous hoses, fittings and bolts.
3) The joystick control and mounting, which is removed by disconnecting cables and harnesses after opening cab doors and covers.
4) The steering cylinder, which is removed after relieving pressure and disconnecting hoses by removing pins and clamps.
The document provides instructions for removing and installing various components of a Caterpillar C2.4 Tier 4 Final engine, including:
1) The fuel manifold, requiring removal of bolts and lines, and installation in reverse order.
2) Fuel injection lines, involving removal of clamps, hoses, and tubes, and installation in reverse order.
3) The exhaust gas recirculation cooler, requiring draining of coolant and removal of hoses and brackets, followed by installation in reverse order.
4) The fuel injection pump, calling for removal of nuts, bolts and hoses, and installation in reverse order.
5) Electronic unit injectors, involving
Doosan e85 compact excavator parts catalogue manualfjjskekfsem
This document contains a parts list and descriptions for a cylinder block assembly. It lists 31 individual parts that make up the cylinder block including the block itself, plugs, bolts, bushes, pins, and other components. It provides the part number, description, quantity, and other identifying information for each part.
Doosan e80 compact excavator parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of an engine, including the cylinder block, gear housing, flywheel housing, oil pan, cylinder head, suction manifold, exhaust manifold, camshaft, crankshaft, pistons, and lubrication oil system. It lists part numbers, descriptions, quantities, and other identifying information for over 50 individual parts across 18 figures.
Doosan e63 compact excavator parts catalogue manualfjjskekfsem
This document provides a parts list and descriptions for various components of an engine, including:
- The cylinder block assembly and related plugs and bolts.
- The gear housing, oil pump, seals, bolts, and covers.
- The flywheel housing, oil pan, seals, and bolts.
- The cylinder head, valves, springs, seals, bolts, and related components.
- The intake manifold, sensors, bolts, and throttle body.
- The exhaust manifold, sensors, bolts, pipes, and EGR components.
- The DPF muffler, sensors, case, bolts, pipes, and brackets.
-
Doosan e55 w compact excavator parts catalogue manualfjjskekfsem
This document contains figures and part numbers for various engine components of an E55W engine, including the cylinder block, gear housing, flywheel housing, cylinder head, intake manifold, exhaust manifold, cam shaft, crank shaft, piston, lubrication oil system, and cooling water system. It provides exploded diagrams of the components with corresponding part numbers, descriptions, and quantities for each part.
Doosan dl420 a wheeled loader parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of a diesel engine. It includes lists of parts, part numbers, descriptions and quantities for items like the cylinder block, timing gear case, flywheel housing, driving system, cylinder head, cylinder head cover, and timing system. Serial numbers are provided for some replaceable parts.
Doosan dl200 tc wheeled loader parts catalogue manualfjjskekfsem
This document provides a parts list and diagrams for the cylinder head and related components of a diesel engine. It includes images and lists of parts with descriptions, part numbers, quantities, serial numbers and replacement part information. The list contains over 80 individual part items or assemblies that make up the cylinder head, valves, springs, guides, cover, gaskets and related hardware.
Doosan 460 plus tier 3 skid steer loader parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of a diesel engine, including the cylinder block, gear housing, flywheel housing, cylinder head, intake manifold, exhaust manifold, cam shaft, crank shaft, piston, lubrication oil system, and cooling water system. It provides part numbers, descriptions, quantities, and other identifying information for over 50 individual parts across these various engine systems.
Daewoo doosan solar 500 lc v (500lcv) crawler excavator parts catalogue manualfjjskekfsem
The document provides a parts list for a muffler assembly, listing part numbers, descriptions, and quantities. It details different muffler sub-assembly and muffler part numbers used over different serial number ranges. Replacement part numbers are also provided where applicable.
Daewoo doosan solar 470 lc v crawler excavator parts catalogue manualfjjskekfsem
This document provides a parts list for a main frame assembly. It includes 3 frames, 2 weights, bolts, washers, brackets, and other minor parts. Serial numbers and replacement part numbers are provided for some items. A second similar document then lists parts for an engine mounting assembly, including an engine, radiator, hoses, mounts, brackets, and fasteners.
Daewoo doosan solar 450 lc v crawler excavator parts catalogue manualfjjskekfsem
The document provides a parts list and descriptions for a cylinder block assembly. It lists over 150 individual parts that make up the cylinder block, including the cylinder block itself, bearing caps, bolts, plugs, seals, switches, pipes, flanges, nozzles, brackets, and other miscellaneous parts. It provides the part numbers, descriptions, and quantities for each part.
New holland l228 tier 4 b (final) skid steer loader service repair manual [nf...fjjskekfsem
This document is a service manual for Tier 4B (final) and Stage IV 200 Series Skid Steer Loaders and Compact Track Loaders, including the L221, L228, C227, and C232 models. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety rules regarding ecology and the environment are also included. The manual provides repair and maintenance instructions to be carried out by qualified dealership personnel using the specified tools and procedures.
New holland cr10.90 combine harvesters service repair manualfjjskekfsem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections on the various systems of the combines, including the engine, transmission, hydraulic systems, electrical systems, attachments and more. The manual provides repair and maintenance information to technicians working on these agricultural machines.
New holland cx6080 tier 3 combine harvester service repair manualfjjskekfsem
This document is a service manual for CX5000 and CX6000 series machines. It contains sections on hydraulic, pneumatic, electrical and electronic systems, engines and emissions control, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, crop processing, feeding, threshing, separating, cleaning, storing, unloading and fault codes. The manual provides technical data, functional descriptions, diagnostics and service procedures for components and systems.
New holland cr9.90 combine harvesters service repair manualfjjskekfsem
This document is a service manual for various combine harvester models from CNH Industrial. It contains an overview of the components covered in the manual, including the engine, transmissions, axles, brakes, hydraulics, steering, tracks, climate control, and electrical systems. The manual is organized by component group and provides part numbers to identify replacement parts.
New holland cx6080 cx6090 tier 4 combine harvester service repair manualfjjskekfsem
This document is a service manual for CX5000 and CX6000 series machines. It contains sections on hydraulic, pneumatic, electrical and electronic systems, engines and emissions control, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, crop processing, feeding, threshing, separating, cleaning, storing, unloading and fault codes. The manual provides technical data, functional descriptions, diagnostics and service procedures for components and systems.
New holland cx7.80 combine harvesters service repair manualfjjskekfsem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections organized by technical system covering the engine, transmission, hydraulics, electrical systems, attachments and more. Safety information is provided at the beginning regarding accident prevention and fluid power system requirements.
New holland cr9090 elevation combine harvesters service repair manualfjjskekfsem
The hydraulic system uses a variable displacement pump to power the work functions and steering. Oil is distributed through the main frame and straw elevator stack valves to cylinders and motors. It returns through filters to the pump and reservoir shared with the hydrostatic system. The pump receives charge pressure from the hydrostatic return oil to operate without a separate charge pump.
New holland c227 stage iv compact track loader service repair manual [ndm4718...fjjskekfsem
This document is a service manual for Tier 4B (final) and Stage IV 200 Series Skid Steer Loaders and Compact Track Loaders, including the L221, L228, C227, and C232 models. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety rules regarding ecology and the environment are also included. The manual provides repair and maintenance instructions to be carried out by qualified dealership personnel using the specified tools and procedures.
Caterpillar cat 903 d compact wheel loader (prefix mzy) service repair manual...fjjskekfsem
This service manual document provides instructions for removing and installing various components on a 903D Compact Wheel Loader, including:
1) The steering frame lock, which must be connected before working on the machine to prevent frame movement.
2) The hydraulic tank, which requires draining fluid and removing numerous hoses, fittings and bolts.
3) The joystick control and mounting, which is removed by disconnecting cables and harnesses after opening cab doors and covers.
4) The steering cylinder, which is removed after relieving pressure and disconnecting hoses by removing pins and clamps.
The document provides instructions for removing and installing various components of a Caterpillar C2.4 Tier 4 Final engine, including:
1) The fuel manifold, requiring removal of bolts and lines, and installation in reverse order.
2) Fuel injection lines, involving removal of clamps, hoses, and tubes, and installation in reverse order.
3) The exhaust gas recirculation cooler, requiring draining of coolant and removal of hoses and brackets, followed by installation in reverse order.
4) The fuel injection pump, calling for removal of nuts, bolts and hoses, and installation in reverse order.
5) Electronic unit injectors, involving
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
5. INTRODUCTION
Foreword
Engine Overhaul
Part of the operations illustrated within this manual can be partially executed while the engine is assembled on the
vehicle, depending on the room available for access to the engine and on the equipment application as well.
NOTE: With regard to the engine disassembly operations, please apply for information consulting the specific manual.
The following information relates to the engine overhaul operations only for what concerns the different components
customizing the engine, according to its specific duties.
In section "General Overhaul", all the operations of engine block overhaul have been contemplated. Therefore the
above mentioned section is to be considered as following the part hereby described.
84328779 08/04/2010
3
6. INTRODUCTION
Safety rules
Standard safety prescriptions
Particular attention shall be drawn on some precautions that must be followed absolutely in a standard working
area and whose non fulfillment will make any other measure useless or not sufficient to ensure safety to the
personnel in charge of maintenance.
Be informed and inform personnel as well of the laws in force regulating safety, providing information documentation
available for consultation.
• Keep working areas as clean as possible, ensuring adequate aeration.
• Ensure that working areas are provided with emergency boxes, that must be clearly visible and always provided
with adequate sanitary equipment.
• Provide for adequate fire extinguishing means, properly indicated and always having free access. Their efficiency
must be checked on a regular basis and the personnel must be trained on interventon methods and priorities.
• Organize and identify specific exit points to evacuate the areas in case of an emergency, providing for adequate
indications of the emergency indications of the emergency exit lines.
• Smoking in working areas subject to fire danger must be strictly prohibited.
• Provide warnings throughout adequate boards signaling danger, prohibitions and indications to ensure easy com-
prehension of the instructions even in case of an emergency.
Prevention of injury
• Do not wear unsuitable clothes for work, with fluttering ends, nor jewels such as and chains when working close
to engines and equipment in motion.
• Wear safety gloves and goggles when performing the following operations:
• • filling inhibitors or anti-frost
• lubrication oil topping or replacement
• utilization of compressed air or liquids under pressure (pressure allowed < 2 bar (29 psi)).
• Wear safety helmet when working close to hanging loads or equipment working at head height level.
• Always wear safety shoes and clothes adhering to the body, better if provided with elastics at the ends.
• Use protection cream for hands.
• Change wet clothes as soon as possible.
• In presence of electrical current exceeding 48 - 60 V verify efficiency of earth and mass electrical connections.
Ensure that hands and feet are dry and execute working operations utilizing isolating foot boards. Do not carry
out working operations if not trained for.
• Do not smoke nor light up flames close to batteries and to any fuel material.
• Put the dirty rags with oil, diesel fuel or solvents in anti-fire specially provided containers.
• Do not execute any intervention if not provided with necessary instructions.
• Do not use any tool or equipment for any different operation from the ones they’ve been designed and provided
for. Serious injury may occur.
• In case of test or calibration operations requiring engine running, ensure that the area is sufficiently ventilated or
utilize specific vacuum equipment to eliminate exhaust gas. Danger: poisoning or death.
During maintenance
• Never open filler cap of cooling system when the engine is hot. Operating pressure would provoke high tempera-
ture with serious danger and risk of burn. Wait until the temperature decreases under 50 °C (122 °F).
• Never top up an overheated engine with cooler and utilize only appropriate liquids.
• Always operate when the engine is tuned off; when particular circumstances require maintenance intervention on
running engine, be aware of all risks involved with such operation.
• Be equipped with adequate and safe containers for drainage operation of engine liquids and exhaust oil.
84328779 08/04/2010
4
7. INTRODUCTION
• Keep the engine clean from oil spills, diesel fuel and or chemical solvents.
• Use of solvents or detergents during maintenance may originate toxic vapors. Always keep working areas venti-
lated. Whenever necessary wear safety mask.
• Do not leave rags impregnated with flammable substances close to the engine.
• Upon engine start after maintenance, undertake proper preventing actions to stop air suction in case of a runaway
speed rate.
• Do not utilize fast screw tightening tools.
• Never disconnect batteries when the engine is running.
• Disconnect batteries before any intervention on the electrical system.
• Disconnect batteries from system before applying a load to them with the battery loader.
• After every intervention, verify that battery clamp polarity is correct and that the clamps are tight and safe from
accidental short circuit and oxidation.
• Do not disconnect and connect electrical connections in presence of electrical feed.
• Before proceeding with pipelines disassembly (pneumatic, hydraulic, fuel pipes) verify presence of liquid or air
under pressure. Take all necessary precautions bleeding and draining residual pressure or closing dump valves.
Always wear adequate safety mask or goggles. Non fulfillment of these precautions may cause serious injury and
poisoning.
• Avoid incorrect tightening or out of sequence. Danger: incorrect tightening may seriously damage engine’s com-
ponents, affecting engine’s duration.
• Avoid priming from fuel tanks made out of copper alloys and/or with ducts not being provided with filters.
• Do not modify cable wires: their lengths shall not be changed.
• Do not connect to the engine electrical equipment unless specifically approved by Iveco.
• Do not modify fuel systems or hydraulic system unless Iveco specific approval has been released. Any unautho-
rized modification will compromise warranty assistance and furthermore may affect engine correct working and
duration.
For engines equipped with electronic controller:
• Do not execute electric arc welding without having previously removed electronic controller.
• Remove electronic controller in case of any intervention requiring heating over 80 °C (176 °F) temperature.
• Do not paint the components and the electronic connections.
• Do not vary or alter any data filed in the electronic controller driving the engine. Any manipulation or alteration
of electronic components shall totally compromise engine assistance warranty and furthermore may affect engine
correct working and duration.
Respect of the Environment
• Respect of the Environment shall be of primary importance: all necessary precautions to ensure personnel’s safety
and health shall be adopted.
• Be informed and inform personnel as well of the laws in force regulating use and exhaust of liquids and engine
drain oil. Provide for adequate board indications and organic specific training courses to ensure that personnel is
fully aware of such law prescriptions and of basic preventative safety measures.
• Collect drain oils in adequate specially provided containers with hermetic sealing ensuring that storage is made in
specific, properly identified areas that shall be ventilated far from heat sources and not exposed to fire danger,
• Handle the batteries with care, storing them in ventilated environment and within anti-acid containers. Warning:
Battery exhalation represent serious danger of intoxication and environment contamination.
84328779 08/04/2010
5
9. HYDRAULIC - PNEUMATIC - ELECTRICAL - ELECTRONIC SYSTEMS - ELECTRICAL POWER SYSTEM
Alternator - Overview
F4CE9484, F4GE9484, F4CE9684, F4GE9684
ALTERNATORCG2 1
The alternator is placed on the front right hand side of the engine and is driven by a Poly V-belt.
Specifications:
• Working voltage:
• 12 V
• Current delivered:
• 90 A @ 6000 RPM
• Absorption in stand-by:
• Less than or equal to 1 mA
• Sense of rotation:
• Clockwise
84328779 08/04/2010
A.30.A / 3
10. HYDRAULIC - PNEUMATIC - ELECTRICAL - ELECTRONIC SYSTEMS - ELECTRICAL POWER SYSTEM
Alternator - Remove
F4DE9484, F4HE9484, F4DE9684, F4DE9687, F4HE9684
Prior operation:
Fan and drive Belt - Remove (B.50.A)
1. Remove the cables from the back of the alternator
(1).
2. Remove the retaining bolts (2) securing the alterna-
tor (1) to the support.
3. Remove the alternator (1).
ALTERNATOR 1
Next operation:
Alternator - Install (A.30.A)
84328779 08/04/2010
A.30.A / 4
11. HYDRAULIC - PNEUMATIC - ELECTRICAL - ELECTRONIC SYSTEMS - ELECTRICAL POWER SYSTEM
Alternator - Install
F4DE9484, F4HE9484, F4DE9684, F4DE9687, F4HE9684
Prior operation:
Alternator - Remove (A.30.A)
1. Install the alternator (1) and tighten the bolts (2) to
the specified torque.
2. Connect the positive and negative cables onto the
back of the alternator.
ALTERNATOR 1
Next operation:
Fan and drive Belt - Install (B.50.A)
84328779 08/04/2010
A.30.A / 5
12. HYDRAULIC - PNEUMATIC - ELECTRICAL - ELECTRONIC SYSTEMS - ELECTRICAL POWER SYSTEM
Alternator - Remove
F4GE9484, F4GE9684
Prior operation:
Fan and drive Belt - Remove (B.50.A)
1. Properly hold the alternator (1) separating it from its
support by loosening the screw (2).
2. Remove the screw, nut and washer.
3. Remove the alternator (1).
ALTERNATORG 1
Next operation:
Alternator - Install (A.30.A)
84328779 08/04/2010
A.30.A / 6
13. HYDRAULIC - PNEUMATIC - ELECTRICAL - ELECTRONIC SYSTEMS - ELECTRICAL POWER SYSTEM
Alternator - Remove
F4CE9484, F4CE9684
Prior operation:
Fan and drive Belt - Remove (B.50.A)
1. Properly hold the alternator (2) and loosen the screw
(3) to remove the alternator from its support.
2. Remove it from its bracket by loosening the screw
(1).
3. Recover the nuts and washers.
ALTERNATORC 1
Next operation:
Alternator - Install (A.30.A)
84328779 08/04/2010
A.30.A / 7
14. HYDRAULIC - PNEUMATIC - ELECTRICAL - ELECTRONIC SYSTEMS - ELECTRICAL POWER SYSTEM
Alternator - Install
F4CE9484, F4GE9484, F4CE9684, F4GE9684
Prior operation:
Alternator - Remove (A.30.A)
1. Connect the alternator (1) to the support.
2. Tighten the screw (2) without locking it.
ALTERNATORG 1
3. Fit the alternator (2) bracket (1) to the engine block.
4. Tighten the screws (3) fastening the alternator to the
support.
ALTERNATORCG 2
Next operation:
Fan and drive Belt - Install (B.50.A)
84328779 08/04/2010
A.30.A / 8
15. ENGINE AND PTO IN - ENGINE
ENGINE - General specification
F4HE9484, F4HE9684
F4HECOMPLETE 1
The NEF F4HE engines are characterized by four stroke diesel cycles turbocharged with 4 or 6 cylinders and 4 valves
per cylinder.
They have high pressure injection fueling (common rail) and are entirely electronically driven in order to optimize the
working process in accordance to the operation, limiting pollution emissions and consumption as much as possible.
NOTE: Data, features and performance are valid only if the setter fully complies with all the installation prescriptions
provided by FPT.
Furthermore, the use of the unit after overhaul should conform to the original specified power and engine RPM for
which the engine has been designed.
84328779 08/04/2010
B.10.A / 9
16. ENGINE AND PTO IN - ENGINE
General Specifications
Engine Type 4 Cylinders 6 Cylinders
Cycle Four-Stroke diesel engine
Power Turbocharged with intercooler
Injection Direct
Number of cylinders 4 6
Bore 104 mm (4 in)
Stroke 132 mm (5 in)
Total Displacement 4485 cm³ 6728 cm³
Timing
Start before T.D.C. 18.5 °
End after B.D.C. 29.5 °
Start before B.D.C. 67 °
End after T.D.C. 35 °
Valve Clearance
Intake 0.20 - 0.30 mm (0.008 - 0.012 in)
Exhaust 0.45 - 0.55 mm (0.018 - 0.022 in)
Fuel Feed
Injection Type Bosch high pressure common rail
Control EDC7 ECU
Injector CRIU 2
Nozzle Type DSLA and DLLA
Injection Sequence 1-3-4-2 1-5-3-6-2-4
Injection pressure 250 - 1600 bar (3625 - 23200 psi)
Aspiration
Turbocharging Intercooled
Turbocharger Type Holset HX35
Lubrication
Oil Pressure @ Low Idle 0.7 bar (10 psi)
Oil Pressure @ Fast Idle 3.5 bar (51 psi)
Oil Pan Capacity 15 l (15.85 US qt)
Oil Filter Capacity 1 l (1.06 US qt)
Cooling
Water Pump Belt Driven
Thermostat 79 - 83 °C (174 - 181 °F)
84328779 08/04/2010
B.10.A / 10
17. ENGINE AND PTO IN - ENGINE
Clearance Data
Cylinder Block and Crankshaft Components
Cylinder Barrels 104.000 - 104.024 mm (4.094 - 4.095 in)
Oversize 0.4 mm (0.016 in)
Pistons
103.714 - 103.732 mm (4.083 - 4.084 in) / 103.759 - 103.777 mm (4.085 -
4.086 in) (*)
Skirt Height 55.9 mm (2.201 in) / 49.5 mm (1.949 in) (*)
Pin housing 38.010 - 38.016 mm (1.496 - 1.497 in)
Piston (oversize) 0.4 mm (0.016 in)
Protrusion 0.28 - 0.52 mm (0.011 - 0.020 in)
Pin 37.994 - 38.000 mm (1.496 - 1.496 in)
Piston Pin - Pin Housing 0.01 - 0.022 mm (0.0004 - 0.001 in)
Piston ring landings
Combustion 2.705 - 2.735 mm (0.106 - 0.108 in)
Intermediate 2.440 - 2.460 mm (0.096 - 0.097 in) / 2.420 - 2.440 mm (0.095 - 0.096 in) (*)
Oil Control 4.030 - 4.050 mm (0.159 - 0.159 in)
Piston Rings
Combustion 2.560 - 2.605 mm (0.101 - 0.103 in)
Intermediate 2.350 - 2.380 mm (0.093 - 0.094 in)
Oil Control 3.970 - 3.990 mm (0.156 - 0.157 in)
Piston Ring and Ring Landing Clearance
Combustion 0.100 - 0.175 mm (0.004 - 0.007 in)
Intermediate 0.060 - 0.110 mm (0.002 - 0.004 in) / 0.040 - 0.090 mm (0.002 - 0.004 in) (*)
Oil Control 0.040 - 0.080 mm (0.002 - 0.003 in)
Piston Ring End Gap
Combustion 0.30 - 0.40 mm (0.012 - 0.016 in)
Intermediate 0.60 - 0.80 mm (0.024 - 0.031 in)
Oil Control 0.30 - 0.55 mm (0.012 - 0.022 in)
Connecting Rod
Small end housing 40.987 - 41.013 mm (1.614 - 1.615 in)
Big end housing 72.987 - 73.013 mm (2.874 - 2.875 in)
Small end bushing Inside
Diameter
38.019 - 38.033 mm (1.497 - 1.497 in)
Big end bearing shell
thickness
1.955 - 1.968 mm (0.077 - 0.077 in)
Piston Pin and Bushing
Clearance
0.019 - 0.039 mm (0.001 - 0.002 in)
Oversize Big end bearing
Shells
0.250 mm (0.010 in) ; 0.500 mm (0.020 in)
Crankshaft
Main Journals 82.99 - 83.01 mm (3.267 - 3.268 in)
Crankpins 68.987 - 69.013 mm (2.716 - 2.717 in)
Main Bearing Shell Thickness 2.456 - 2.464 mm (0.097 - 0.098 in)
Big end Bearing Shell
Thickness
1.955 - 1.968 mm (0.077 - 0.078 in)
Main Bearing Bore
No. 1,5 / 1,7 87.982 - 88.008 mm (3.464 - 3.465 in)
No. 2,3,4 / 2,3,4,5,6 87.977 - 88.013 mm (3.464 - 3.465 in)
Bearing Shell and Journal Clearance
No. 1,5 / 1,7 0.041 - 0.119 mm (0.002 - 0.005 in)
No. 2,3,4 / 2,3,4,5,6 0.041 - 0.103 mm (0.002 - 0.004 in)
Bearing Shell and Crankpin
Clearance
0.033 - 0.041 mm (0.001 - 0.002 in)
(*) Valid for engines: F4HE9684P, F4HE9684A, F4HE9687P, F4HE9687A
84328779 08/04/2010
B.10.A / 11
18. ENGINE AND PTO IN - ENGINE
Clearance Data
Thrust Journal 37.475 - 37.545 mm (1.475 - 1.478 in)
Thrust Bearing Bore 32.180 - 32.280 mm (1.267 - 1.271 in)
Thrust Bearing 37.28 - 37.38 mm (1.468 - 1.472 in)
Crankshaft End Play 0.095 - 0.265 mm (0.004 - 0.010 in)
Cylinder Head and Components
Valve Guide Bore 7.042 - 7.062 mm (0.277 - 0.278 in)
Intake Valves
Stem diameter 6.970 - 6.990 mm (0.274 - 0.275 in)
Face angle 59.75 - 60.25 °
Exhaust Valves
Stem diameter 6.970 - 6.990 mm (0.274 - 0.275 in)
Face angle 44.75 - 44.25 °
Valve Stem and Guide
Clearance
0.052 - 0.092 mm (0.002 - 0.004 in)
Valve Seat Bore
Intake 34.837 - 34.863 mm (1.372 - 1.373 in)
Exhaust 34.837 - 34.863 mm (1.372 - 1.373 in)
Valve seat Outside Diameter:
Intake 34.917 - 34.931 mm (1.375 - 1.375 in)
Exhaust 34.917 - 34.931 mm (1.375 - 1.375 in)
Valve Seat Angle
Intake 60 °
Exhaust 45 °
Valve Sink
Intake 0.59 - 1.11 mm (0.023 - 0.044 in)
Exhaust 0.96 - 1.48 mm (0.038 - 0.058 in)
Interference Between Valve Seat and Cylinder Head
Intake 0.054 - 0.094 mm (0.002 - 0.004 in)
Exhaust 0.054 - 0.094 mm (0.002 - 0.004 in)
Valve Spring Height
Free 47.75 mm (1.880 in)
Under a load equal to:
330.8 - 348.8 N (74.4 - 78.4
lb)
35.33 mm (1.391 in)
Under a load equal to:
702 - 780 N (157.8 - 175.4 lb) 25.2 mm (0.992 in)
Camshaft Bore
No.1 (flywheel side) 59.222 - 59.248 mm (2.332 - 2.333 in)
No. 2,3,4,5 / 2,3,4,5,6,7 54.089 - 54.139 mm (2.129 - 2.131 in)
Camshaft Journals
1-5 / 1-7 53.995 - 54.045 mm (2.126 - 2.128 in)
Bushing inside diameter 54.083 - 54.147 mm (2.129 - 2.132 in)
Bushing and Journal Clearance 0.038 - 0.162 mm (0.001 - 0.006 in)
Cam Lift
Intake 7.582 mm (0.299 in)
Exhaust 6.045 mm (0.238 in)
Tappet Bore 16.000 - 16.030 mm (0.630 - 0.631 in)
Tappet outside diameter
Top 15.924 - 15.954 mm (0.627 - 0.628 in)
Middle 15.960 - 15.975 mm (0.628 - 0.629 in)
Bottom 15.924 - 15.954 mm (0.627 - 0.628 in)
Tappets and Bore Clearance 0.025 - 0.070 mm (0.001 - 0.003 in)
(*) Valid for engines: F4HE9684P, F4HE9684A, F4HE9687P, F4HE9687A
84328779 08/04/2010
B.10.A / 12
19. ENGINE AND PTO IN - ENGINE
Clearance Data
Rocker shaft 21.965 - 21.977 mm (0.865 - 0.865 in)
Rockers 22.001 - 22.027 mm (0.866 - 0.867 in)
Rockers and Shaft Clearance 0.024 - 0.162 mm (0.001 - 0.006 in)
(*) Valid for engines: F4HE9684P, F4HE9684A, F4HE9687P, F4HE9687A
84328779 08/04/2010
B.10.A / 13
20. ENGINE AND PTO IN - ENGINE
ENGINE - General specification
F4DE9484, F4DE9684, F4DE9687
F4DECOMPLETE 1
The NEF F4DE engines are characterized by four stroke diesel cycles turbocharged with 4 or 6 cylinders and 4 valves
per cylinder.
They have high pressure injection fueling (common rail) and are entirely electronically driven in order to optimize the
working process in accordance to the operation, limiting pollution emissions and consumption as much as possible.
NOTE: Data, features and performance are valid only if the setter fully complies with all the installation prescriptions
provided by FPT.
Furthermore, the use of the unit after overhaul should conform to the original specified power and engine RPM for
which the engine has been designed.
84328779 08/04/2010
B.10.A / 14
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. ENGINE AND PTO IN - ENGINE
General Specifications
Engine Type 4 Cylinders 6 Cylinders
Cycle Four-Stroke diesel engine
Power Turbocharged with intercooler
Injection Direct
Number of cylinders 4 6
Bore 104 mm (4 in)
Stroke 132 mm (5 in)
Total Displacement 4485 cm³ 6728 cm³
Timing
Start before T.D.C. 18.5 °
End after B.D.C. 29.5 °
Start before B.D.C. 67 °
End after T.D.C. 35 °
Valve Clearance
Intake 0.20 - 0.30 mm (0.008 - 0.012 in)
Exhaust 0.45 - 0.55 mm (0.018 - 0.022 in)
Fuel Feed
Injection Type Bosch high pressure common rail
Control EDC7 ECU
Injector CRIU 2
Nozzle Type DSLA and DLLA
Injection Sequence 1-3-4-2 1-5-3-6-2-4
Injection pressure 250 - 1600 bar (3625 - 23200 psi)
Aspiration
Turbocharging Intercooled
Turbocharger Type Holset HX35
Lubrication
Oil Pressure @ Low Idle 0.7 bar (10 psi)
Oil Pressure @ Fast Idle 3.5 bar (51 psi)
Oil Pan Capacity 15 l (15.85 US qt)
Oil Filter Capacity 1 l (1.06 US qt)
Cooling
Water Pump Belt Driven
Thermostat 79 - 83 °C (174 - 181 °F)
84328779 08/04/2010
B.10.A / 15
23. ENGINE AND PTO IN - ENGINE
Clearance Data
Cylinder Block and Crankshaft Components
Cylinder Barrels 104.000 - 104.024 mm (4.094 - 4.095 in)
Oversize 0.4 mm (0.016 in)
Pistons
103.714 - 103.732 mm (4.083 - 4.084 in) / 103.759 - 103.777 mm (4.085 -
4.086 in) (*)
Skirt Height 55.9 mm (2.201 in) / 49.5 mm (1.949 in) (*)
Pin housing 38.010 - 38.016 mm (1.496 - 1.497 in)
Piston (oversize) 0.4 mm (0.016 in)
Protrusion 0.28 - 0.52 mm (0.011 - 0.020 in)
Pin 37.994 - 38.000 mm (1.496 - 1.496 in)
Piston Pin - Pin Housing 0.01 - 0.022 mm (0.0004 - 0.001 in)
Piston ring landings
Combustion 2.705 - 2.735 mm (0.106 - 0.108 in)
Intermediate 2.440 - 2.460 mm (0.096 - 0.097 in) / 2.420 - 2.440 mm (0.095 - 0.096 in) (*)
Oil Control 4.030 - 4.050 mm (0.159 - 0.159 in)
Piston Rings
Combustion 2.560 - 2.605 mm (0.101 - 0.103 in)
Intermediate 2.350 - 2.380 mm (0.093 - 0.094 in)
Oil Control 3.970 - 3.990 mm (0.156 - 0.157 in)
Piston Ring and Ring Landing Clearance
Combustion 0.100 - 0.175 mm (0.004 - 0.007 in)
Intermediate 0.060 - 0.110 mm (0.002 - 0.004 in) / 0.040 - 0.090 mm (0.002 - 0.004 in) (*)
Oil Control 0.040 - 0.080 mm (0.002 - 0.003 in)
Piston Ring End Gap
Combustion 0.30 - 0.40 mm (0.012 - 0.016 in)
Intermediate 0.60 - 0.80 mm (0.024 - 0.031 in)
Oil Control 0.30 - 0.55 mm (0.012 - 0.022 in)
Connecting Rod
Small end housing 40.987 - 41.013 mm (1.614 - 1.615 in)
Big end housing 72.987 - 73.013 mm (2.874 - 2.875 in)
Small end bushing Inside
Diameter
38.019 - 38.033 mm (1.497 - 1.497 in)
Big end bearing shell
thickness
1.955 - 1.968 mm (0.077 - 0.077 in)
Piston Pin and Bushing
Clearance
0.019 - 0.039 mm (0.001 - 0.002 in)
Oversize Big end bearing
Shells
0.250 mm (0.010 in) ; 0.500 mm (0.020 in)
Crankshaft
Main Journals 82.99 - 83.01 mm (3.267 - 3.268 in)
Crankpins 68.987 - 69.013 mm (2.716 - 2.717 in)
Main Bearing Shell Thickness 2.456 - 2.464 mm (0.097 - 0.098 in)
Big end Bearing Shell
Thickness
1.955 - 1.968 mm (0.077 - 0.078 in)
Main Bearing Bore
No. 1,5 / 1,7 87.982 - 88.008 mm (3.464 - 3.465 in)
No. 2,3,4 / 2,3,4,5,6 87.977 - 88.013 mm (3.464 - 3.465 in)
Bearing Shell and Journal Clearance
No. 1,5 / 1,7 0.041 - 0.119 mm (0.002 - 0.005 in)
No. 2,3,4 / 2,3,4,5,6 0.041 - 0.103 mm (0.002 - 0.004 in)
Bearing Shell and Crankpin
Clearance
0.033 - 0.041 mm (0.001 - 0.002 in)
(*) Valid for engines: F4DE9684A.
84328779 08/04/2010
B.10.A / 16
24. ENGINE AND PTO IN - ENGINE
Clearance Data
Thrust Journal 37.475 - 37.545 mm (1.475 - 1.478 in)
Thrust Bearing Bore 32.180 - 32.280 mm (1.267 - 1.271 in)
Thrust Bearing 37.28 - 37.38 mm (1.468 - 1.472 in)
Crankshaft End Play 0.095 - 0.265 mm (0.004 - 0.010 in)
Cylinder Head and Components
Valve Guide Bore 7.042 - 7.062 mm (0.277 - 0.278 in)
Intake Valves
Stem diameter 6.970 - 6.990 mm (0.274 - 0.275 in)
Face angle 59.75 - 60.25 °
Exhaust Valves
Stem diameter 6.970 - 6.990 mm (0.274 - 0.275 in)
Face angle 44.75 - 44.25 °
Valve Stem and Guide
Clearance
0.052 - 0.092 mm (0.002 - 0.004 in)
Valve Seat Bore
Intake 34.837 - 34.863 mm (1.372 - 1.373 in)
Exhaust 34.837 - 34.863 mm (1.372 - 1.373 in)
Valve seat Outside Diameter:
Intake 34.917 - 34.931 mm (1.375 - 1.375 in)
Exhaust 34.917 - 34.931 mm (1.375 - 1.375 in)
Valve Seat Angle
Intake 60 °
Exhaust 45 °
Valve Sink
Intake 0.59 - 1.11 mm (0.023 - 0.044 in)
Exhaust 0.96 - 1.48 mm (0.038 - 0.058 in)
Interference Between Valve Seat and Cylinder Head
Intake 0.054 - 0.094 mm (0.002 - 0.004 in)
Exhaust 0.054 - 0.094 mm (0.002 - 0.004 in)
Valve Spring Height
Free 47.75 mm (1.880 in)
Under a load equal to:
330.8 - 348.8 N (74.4 - 78.4
lb)
35.33 mm (1.391 in)
Under a load equal to:
702 - 780 N (157.8 - 175.4 lb) 25.2 mm (0.992 in)
Camshaft Bore
No.1 (flywheel side) 59.222 - 59.248 mm (2.332 - 2.333 in)
No. 2,3,4,5 / 2,3,4,5,6,7 54.089 - 54.139 mm (2.129 - 2.131 in)
Camshaft Journals
1-5 / 1-7 53.995 - 54.045 mm (2.126 - 2.128 in)
Bushing inside diameter 54.083 - 54.147 mm (2.129 - 2.132 in)
Bushing and Journal Clearance 0.038 - 0.162 mm (0.001 - 0.006 in)
Cam Lift
Intake 7.582 mm (0.299 in)
Exhaust 6.045 mm (0.238 in)
Tappet Bore 16.000 - 16.030 mm (0.630 - 0.631 in)
Tappet outside diameter
Top 15.924 - 15.954 mm (0.627 - 0.628 in)
Middle 15.960 - 15.975 mm (0.628 - 0.629 in)
Bottom 15.924 - 15.954 mm (0.627 - 0.628 in)
Tappets and Bore Clearance 0.025 - 0.070 mm (0.001 - 0.003 in)
(*) Valid for engines: F4DE9684A.
84328779 08/04/2010
B.10.A / 17
25. ENGINE AND PTO IN - ENGINE
Clearance Data
Rocker shaft 21.965 - 21.977 mm (0.865 - 0.865 in)
Rockers 22.001 - 22.027 mm (0.866 - 0.867 in)
Rockers and Shaft Clearance 0.024 - 0.162 mm (0.001 - 0.006 in)
(*) Valid for engines: F4DE9684A.
84328779 08/04/2010
B.10.A / 18
26. ENGINE AND PTO IN - ENGINE
ENGINE - Service limits Maintenance Planning
F4DE9484, F4HE9484, F4DE9684, F4DE9687, F4HE9684
To ensure optimized working conditions, in the following pages we are providing instructions for the overhaul control
interventions, checks and setting operations that must be performed on the engine at due planned dates.
The frequency of the maintenance operations is just an indication since the use of the engine is the main characteristic
to determine and evaluate replacements and checks.
It is not only allowed but recommended that the staff in charge of the maintenance should also carry out the necessary
maintenance and controlling operations even if not being included in the ones listed here below but that may be
suggested by common sense and by the specific conditions in which the engine is run.
Regular maintenance and inspection planning
Checks and periodical inspections Frequency (hours)
Visual check of engine Daily
Inspection presence of water in fuel filter or pre-filter Daily
Inspection blow-by filter elements -
Inspection of belt wear status -
Inspection and setting of tappet clearance 4000
EDC When anomaly occurs
Replacement of engine’s oil and filter 500
Replacement of pre-filter 1000
Replacement of fuel filter 500
Replacement of blow-by filter 500
Replacement of belt 1500
NOTICE: The frequency of the maintenance operations is just an indication since the use of the engine is the main
characteristic to determine and evaluate replacement and checks.
The maintenance operations are valid only if the setter fully complies with all the installation prescriptions provided by
Iveco Motors.
Furthermore, the users assembled by the setter shall always be in conformance to couple, power and number of turns
based on which the engine has been designed.
Daily Maintenance Checks
It is a good habit to execute, before engine start, a series of simple checks that might represent a valid warranty
to avoid inconveniences, even serious, during engine running. Such checks are usually up to the operators and
to the vehicle’s drivers.
• Fluid levels and checks of any eventual leakage from the fuel, cooling and lubricating circuits.
• Notify the maintenance if any inconvenience is detected or if any filling is necessary.
After engine start and while engine is running, proceed with the following checks and controls:
• check presence of any eventual leakage from the fuel, cooling and lubricating circuits.
• Verify absence of noise or unusual rattle during engine working.
• Verify, using vehicle devices, the prescribed pressure, temperature and other parameters.
• Visual check of fumes (color of exhaust emissions)
• Visual check of cooling liquid level, in the expansion tank.
84328779 08/04/2010
B.10.A / 19