St Kilda Botanical Gardens Gates Proposal - Wong Filley Presentation
- 1. Note: As this is a Design / Concept Plan, design
details for fabrication, structural and foundation
requirements have not been finalised. Additional
4600
design elements will be incorporated into the final
design to address health and safety aspects such
700 300 2100 100 1265 100 1035 300 400
as climbability and entrapment.
All images used in the gates © David Wong 2010.
300
10 mm Stainless Steel laser cut panels
Enamel painted, colour to be determined
350
250
100
2100
2265
Design / Concept Drawings
Gate 1
Dickens Street
65
Part of the tender submission to
Port Phillip City Council
Corten 100 x 50 mm RHS 100 x 100 mm posts Corten
Design, Fabrication
and Installation of Gates
at the St Kilda Botanic Gardens
Reference Number 1409
1 February 2010
0 1.0 m
Scale 1:20
© David Wong and Bruce Filley
- 2. Note: Structural steel supporting and cross bracing Corten panels not shown. Note: As this is a Design / Concept Plan, design
details for fabrication, structural and foundation
requirements have not been finalised. Additional
Tunnel through reinfored Corten or painted mild steel panels
design elements will be incorporated into the final
500
design to address health and safety aspects such
as climbability and entrapment.
All images used in the gates © David Wong 2010.
500
500
Steel Posts
100 x 50 mm RHS
500
1000
100 x 100 mm steel post
500
behind Corten panel
15
00
375
365
55 70
45
6 reinforced Corten or
painted mild steel panels
Corten “Shards” with Tunnel through
795
50 x 50 mm RHS
100 x 50 mm RHS
3870
3300
Design / Concept Drawings
2800
Gates 2 and 3
2100
cnr Dickens and Tennyson Streets
cnr Dickens and Herbert Streets
Part of the tender submission to
Port Phillip City Council
65
1040 50 1265 120 600 225 100 190 245 170 1110 170 150 55 272 390 172
Design, Fabrication
3500 1360 1450 1039
and Installation of Gates
at the St Kilda Botanic Gardens
Gate panel: 10 mm laser
Gate: 10 mm laser
cut stainless steel
cut stainless steel
Reference Number 1409
1 February 2010
0 1.0 m
Scale 1:20
© David Wong and Bruce Filley
- 3. Note: As this is a Design / Concept Plan, design
details for fabrication, structural and foundation
requirements have not been finalised. Additional
design elements will be incorporated into the final
490 4820 760
design to address health and safety aspects such
as climbability and entrapment.
100 3370 200 1265 100
All images used in the gates © David Wong 2010.
Gate
500 Double Gates
100 x 100 mm posts
inside Corten column
10 mm Stainless Steel laser cut 10 mm Stainless Steel laser cut
Corten
350
100 200
100 x 100 mm steel frame
behind s/s plate
2100
Design / Concept Drawings
Gate 4
Tennyson Street
65
100 x 50 RHS steel framework
Part of the tender submission to
Port Phillip City Council
10 mm Stainless Steel laser cut panels 10 mm Stainless Steel laser cut panel
Enamel painted, colour to be determined
Design, Fabrication
100 x 100 mm steel post
behind s/s plate
and Installation of Gates
at the St Kilda Botanic Gardens
Reference Number 1409
1 February 2010
0 1.0 m
Scale 1:20
© David Wong and Bruce Filley