Ship in
•Download as DOC, PDF•
1 like•342 views
The document announces the dedication of a Ship-in-Campus and the inauguration of a modernized university main road at the Cochin University of Science and Technology on February 12, 2011 at 4:30pm. The event will include welcome remarks, speeches on the Ship-in-Campus project, the inaugural address for the road, and felicitations. The dedication of the Ship-in-Campus will be done by the Honorable Minister for Fisheries and Registration and the inauguration of the road will be done by the Member of Parliament. The venue is the Kunjali Marakkar School of Marine Engineering.
Report
Share
Report
Share
Recommended
Student Exploratory Aircraft Mechanics Class 2013
Lucile M. Wright Air Museum and JCC MTI class for high school and home schooled students over age 14 funded by the Chautauqua Region Community Foundation. Provides hands-on experience documented in logbooks that can be used to satisfy FAA requirements.
Lake lanao 13th wlc paper acceptance
Pipalawan O. Naga has been invited to present the paper "Lake Lanao: An Ancient Lake in Distress" as an oral presentation at the 13th World Lake Conference being held in Wuhan, China from November 2-5, 2009. The chairman of the conference's scientific committee, Masahisa Nakamura, informed Mr. Naga that his paper was accepted for a technical session and notified him that session details would follow as the program is finalized.
Sustinable Mainatenace of Navigation Channel
This document discusses the need to maintain navigation channels to accommodate increasingly large container ships. It focuses on the case of Port Tanjung Pelepas (PTP) in Johor, Malaysia. Ship sizes have been rapidly increasing, with some now over 18,000 TEU, but navigation channels have not been maintained accordingly. Without proper maintenance dredging, siltation reduces channel depths and poses risks to ship safety. The document analyzes trends in ship sizes, risks of groundings and collisions if channels are not deep enough, and environmental impacts of dredging and disposal of contaminated sediments. It argues for sustainable, frequent maintenance dredging to balance growing ship sizes with safe navigation in restricted waters like the Strait of Malacca near
Summer trhrg
The document provides guidelines for students seeking summer training or project/dissertation work at the Indian Institute of Chemical Biology. It outlines the eligibility requirements, application process and deadlines. Students must be pursuing a postgraduate degree, have secured at least 60% marks, and obtain approval from their institution. Applications should include academic records and a recommendation letter. Training opportunities are also available through sponsored programs. Final applications are due at least 60 days before the proposed start date. There is no fee for participation, but students must arrange their own accommodation. Incomplete applications will be rejected without correspondence.
Site layout cpm module4
Most construction sites that run into trouble do so for reasons related to managerial factors rather than because of technical problems. The site-based management can make significant improvements in the cost and time savings during the construction process without involving a mass of additional work. The role of site managers is to control and maintain work performance and then taking actions to rectify situations where performance is unsatisfactory.
Concepts and Formulas of Construction Site Layout Planning Elements:
A well-planned site including all temporary facilities and utilities lead to: 1) increasing productivity and safety, 2) reducing area(s) needed for temporary construction, and 3) maximizing utilization. The following points should be considered in good site layout
Site layout planning can affect productivity and is crucial to project success. However, as construction is heterogeneous in the nature of its organizations, project designs, time constraints, environmental effects, etc., site layout planning for each project becomes unique. Affected by many uncertainties variables! And variations, site layout planning is a typical multi objective problem.
Problem solving requires representing the problem in a language that problem solvers can understand. However, solutions of most construction problems rely on empirical Knowledge about the site layout that can be as a site space allocation for material storage, working areas, units of accommodation, plant positions, general circulation areas, and also access and egress for deliveries and emergency services. Furthermore, conflicting objectives and the uniqueness of construction projects like bad site layout make the problems difficult to conceptualize and define.
Network analysis cpm module3
Introduction
CPM/PERT or Network Analysis as the technique is sometimes called, developed along two parallel streams, one industrial and the other military.
CPM (Critical Path Method) was the discovery of M.R.Walker of E.I.Du Pont de Nemours & Co. and J.E.Kelly of Remington Rand, circa 1957. The computation was designed for the UNIVAC-I computer. The first test was made in 1958, when CPM was applied to the construction of a new chemical plant. In March 1959, the method was applied to maintenance shut-down at the Du Pont works in Louisville, Kentucky. Unproductive time was reduced from 125 to 93 hours.
PERT (Project Evaluation and Review Technique) was devised in 1958 for the POLARIS missile program by the Program Evaluation Branch of the Special Projects office of the U.S.Navy, helped by the Lockheed Missile Systems division and the Consultant firm of Booz-Allen & Hamilton. The calculations were so arranged so that they could be carried out on the IBM Naval Ordinance Research Computer (NORC) at Dahlgren, Virginia.
Network analysis cpm module3 ppt
1) The document discusses project management tools including network analysis techniques like CPM and PERT.
2) CPM and PERT are used to plan and schedule complex projects using network diagrams that show the logical sequence and relationships of tasks.
3) PERT uses three time estimates for each activity - optimistic, most likely, and pessimistic - to calculate the expected duration using probability.
Recommended
Student Exploratory Aircraft Mechanics Class 2013
Lucile M. Wright Air Museum and JCC MTI class for high school and home schooled students over age 14 funded by the Chautauqua Region Community Foundation. Provides hands-on experience documented in logbooks that can be used to satisfy FAA requirements.
Lake lanao 13th wlc paper acceptance
Pipalawan O. Naga has been invited to present the paper "Lake Lanao: An Ancient Lake in Distress" as an oral presentation at the 13th World Lake Conference being held in Wuhan, China from November 2-5, 2009. The chairman of the conference's scientific committee, Masahisa Nakamura, informed Mr. Naga that his paper was accepted for a technical session and notified him that session details would follow as the program is finalized.
Sustinable Mainatenace of Navigation Channel
This document discusses the need to maintain navigation channels to accommodate increasingly large container ships. It focuses on the case of Port Tanjung Pelepas (PTP) in Johor, Malaysia. Ship sizes have been rapidly increasing, with some now over 18,000 TEU, but navigation channels have not been maintained accordingly. Without proper maintenance dredging, siltation reduces channel depths and poses risks to ship safety. The document analyzes trends in ship sizes, risks of groundings and collisions if channels are not deep enough, and environmental impacts of dredging and disposal of contaminated sediments. It argues for sustainable, frequent maintenance dredging to balance growing ship sizes with safe navigation in restricted waters like the Strait of Malacca near
Summer trhrg
The document provides guidelines for students seeking summer training or project/dissertation work at the Indian Institute of Chemical Biology. It outlines the eligibility requirements, application process and deadlines. Students must be pursuing a postgraduate degree, have secured at least 60% marks, and obtain approval from their institution. Applications should include academic records and a recommendation letter. Training opportunities are also available through sponsored programs. Final applications are due at least 60 days before the proposed start date. There is no fee for participation, but students must arrange their own accommodation. Incomplete applications will be rejected without correspondence.
Site layout cpm module4
Most construction sites that run into trouble do so for reasons related to managerial factors rather than because of technical problems. The site-based management can make significant improvements in the cost and time savings during the construction process without involving a mass of additional work. The role of site managers is to control and maintain work performance and then taking actions to rectify situations where performance is unsatisfactory.
Concepts and Formulas of Construction Site Layout Planning Elements:
A well-planned site including all temporary facilities and utilities lead to: 1) increasing productivity and safety, 2) reducing area(s) needed for temporary construction, and 3) maximizing utilization. The following points should be considered in good site layout
Site layout planning can affect productivity and is crucial to project success. However, as construction is heterogeneous in the nature of its organizations, project designs, time constraints, environmental effects, etc., site layout planning for each project becomes unique. Affected by many uncertainties variables! And variations, site layout planning is a typical multi objective problem.
Problem solving requires representing the problem in a language that problem solvers can understand. However, solutions of most construction problems rely on empirical Knowledge about the site layout that can be as a site space allocation for material storage, working areas, units of accommodation, plant positions, general circulation areas, and also access and egress for deliveries and emergency services. Furthermore, conflicting objectives and the uniqueness of construction projects like bad site layout make the problems difficult to conceptualize and define.
Network analysis cpm module3
Introduction
CPM/PERT or Network Analysis as the technique is sometimes called, developed along two parallel streams, one industrial and the other military.
CPM (Critical Path Method) was the discovery of M.R.Walker of E.I.Du Pont de Nemours & Co. and J.E.Kelly of Remington Rand, circa 1957. The computation was designed for the UNIVAC-I computer. The first test was made in 1958, when CPM was applied to the construction of a new chemical plant. In March 1959, the method was applied to maintenance shut-down at the Du Pont works in Louisville, Kentucky. Unproductive time was reduced from 125 to 93 hours.
PERT (Project Evaluation and Review Technique) was devised in 1958 for the POLARIS missile program by the Program Evaluation Branch of the Special Projects office of the U.S.Navy, helped by the Lockheed Missile Systems division and the Consultant firm of Booz-Allen & Hamilton. The calculations were so arranged so that they could be carried out on the IBM Naval Ordinance Research Computer (NORC) at Dahlgren, Virginia.
Network analysis cpm module3 ppt
1) The document discusses project management tools including network analysis techniques like CPM and PERT.
2) CPM and PERT are used to plan and schedule complex projects using network diagrams that show the logical sequence and relationships of tasks.
3) PERT uses three time estimates for each activity - optimistic, most likely, and pessimistic - to calculate the expected duration using probability.
Cpm module iii reference
Introduction 1
Network is a technique used for planning and scheduling of large projects in the fields of construction, maintenance, fabrication, purchasing, computer system instantiation, research and development planning etc. There is multitude of operations research situations that can be modeled and solved as network. Some recent surveys reports that as much as 70% of the real-world mathematical programming problems can be represented by network related models. Network analysis is known by many names _PERT (Programme Evaluation and Review Technique), CPM (Critical Path Method), PEP (Programme Evaluation Procedure), LCES (Least Cost Estimating and Scheduling), SCANS (Scheduling and Control by Automated Network System), etc
This chapter will present three of algorithms.
1. PERT & CPM
2. Shortest- route algorithms
3. Maximum-flow algorithms
Assignment iii cpm
ASSIGNMENT III
B Tech 8th Semester
Submit it on or before 20th April 2020
01. Construct a network for each of the activities and their precedence relationships are given below:
Economics of project evaluation for reference cpm module2
This document provides an overview of key concepts in project structure and management, including:
1) It defines a project and explains their unique, non-routine nature requiring organization and resources to complete within a time limit.
2) It outlines the typical stages in a project's lifecycle from conception to implementation and completion.
3) It discusses important characteristics of projects including objectives, uniqueness, complexity, and risk/uncertainty.
4) It categorizes different types of projects based on factors like location, technology, size and scope.
Economics of project evaluation cpm module2
Introduction: The competencies required for developing business cases comprise a range of skills, including those for:
• facilitation and negotiation
• demand management
• risk management
• value management
• economic, social, environmental and budget analyses, and
• strategic planning.
Welded plate girder
A welded plate girder bridge is designed to carry highway traffic. The bridge is 120 feet long with a roadway width of 30 feet. It uses A992 steel for the flanges and A709 Grade 50 steel for the web and connection plates.
Column splices design
This document discusses two column splice design examples. The first example covers column splice design while the second example also focuses on column splice design. Both examples provide information on designing column splices for structural columns.
Beam column design
This document provides two examples of beam-column design. The first example details the design of a reinforced concrete beam-column connection. The second example also examines the design of a beam-column connection, though it is unclear if this refers to another reinforced concrete example or a different material. Both examples are intended to demonstrate the process of designing beam-column connections.
Design of steel structure as per is 800(2007)
It does not offer resistance against rotation and also termed as a hinged or pinned connections.
It transfers only axial or shear forces and it is not designed for moment
It is generally connected by single bolt/rivet and therefore full rotation is allowed
Notification jr fellow
The document announces a posting for a Junior Research Fellow position with a monthly stipend of Rs.12,000 plus housing allowance. The 3-year project funded by the Department of Atomic Energy seeks applicants with an M.Sc. in Mathematics and at least a 6.5 CGPA or equivalent in Graph Theory. Preference will be given to those who have qualified the UGC NET examination after 2005. Applicants should submit details by September 22nd to Dr. A. Vijayakumar.
Mba fulltime semester i
The document outlines the syllabus for the first semester of an MBA fulltime program. It includes 7 core courses covering topics such as management concepts, quantitative methods, managerial economics, business environment, business communication, financial accounting, and information technology for managers. Each course is broken down into 5 modules and includes objectives, detailed outlines, and recommended readings. The courses aim to provide foundational business knowledge and skills to MBA students.
Mba adv-(2011-12)
The document announces the invitation of applications for admission to the MBA program at the National Institute of Technology Karnataka for the 2011-2012 academic year. Indian citizens can download the application form starting January 3, 2011 from the NITK website and submit the completed form along with a DD for Rs. 600 by March 31, 2011. Eligibility for the full-time 2-year MBA program requires a bachelor's degree from a recognized university with over 55% aggregate marks, or 50% for SC/ST applicants. Admission will be based on the applicant's CAT 2010 score and performance in a group discussion and interview at the institute.
Infor bullet-mba-2011-12
This document provides information about the Master of Business Administration (MBA) program for 2011-2012 at the National Institute of Technology Karnataka in Surathkal, India. It details the minimum qualifications required for admission, which include a bachelor's degree in any discipline with over 55% marks and a valid CAT score. Selection is based 90% on the CAT score and 10% on performance in a group discussion and interview. The two-year full-time MBA program will begin in the fall of 2011 and the intake is limited to a certain number of students.
Form1
The document appears to be an application form for admission to postgraduate programs (Ph.D., M.Des., M.S.(Research), and M.Tech.) at the Indian Institute of Technology Delhi. It requests information such as the applicant's personal details, educational qualifications, GATE/CEED scores, work experience, proposed area of research, department/program choices, and payment details. The form also includes instructions for submission of additional documents and notes that incomplete applications may be provisionally accepted pending submission of required documents by specified dates.
Contract lecturers various_depts
Cochin University of Science and Technology is seeking to fill several teaching positions across various departments on a contract basis. The positions include 2 in Applied Chemistry, 2 in Electronics, 4 in Mathematics, 2 in Marine Geology and Geophysics, 1 in School of Industrial Fisheries Economics, 2 in Computer Applications, 1 in Management and 1 in Commerce under the School of Legal Studies, and 1 in International School of Photonics. The minimum qualifications and salaries offered are detailed for each position. Interested candidates should submit applications with full bios and documents to the respective Heads/Directors by September 22, 2010.
Ballia
The document contains a list of 105 dealers in Ballia with their TIN numbers, UPTT numbers, firm names, and addresses. It provides key information about various firms dealing in items like food processing, medical supplies, hardware, grains, and other goods in Ballia, India.
Agr test41
The document announces a written test for the position of Agricultural Assistant with the Spices Board. It provides details such as the date, time, syllabus, and locations of the test. It also lists the names and exam center details of candidates provisionally selected to appear for the written test. The test will be held on November 13, 2010 from 10:30 am to 12 noon at various venues in Kochi. The syllabus covers topics in botany, agriculture/horticulture, and general knowledge.
Advertisement 3rd conclave_2010
The Indian Institute of Information Technology, Allahabad is organizing the Third Science Conclave from December 8-14, 2010. The conclave will feature interactions between students, young teachers, scientists and Nobel laureates as well as other prominent academics and researchers. The goal is to inspire and motivate students to pursue careers in basic sciences and promote scientific development in India. Top students, researchers and young faculty who have not attended the previous conclaves are invited to apply by September 15th by contacting their institution and submitting the application form found on the conclave website.
Adv2011
The document announces admission to various postgraduate and PhD programs for the 2011-2012 academic year at the Indian Institute of Technology Delhi. It lists the departments and programs offering PhD, MTech, MS(Research), and MDes degrees. It provides eligibility criteria including required academic scores and work experience. Various types of financial assistance are available. Important dates for obtaining the application form and submitting the completed application are provided.
33 37 pukird, s
This document summarizes the synthesis and characterization of silicon dioxide (SiO2) nanowires prepared from rice husk ash. SiO2 nanowires were synthesized by thermally evaporating a mixture of rice husk ash and coconut shell charcoal at 1350°C under nitrogen gas. The resulting nanowires were characterized using scanning electron microscopy and X-ray diffraction. The SiO2 nanowires had diameters between 40-200 nm and lengths of a few micrometers. Crystalline SiO2 and silicon carbide structures were observed.
030
This document summarizes research on using laser processing techniques to deposit nanocrystalline titanium dioxide (nc-TiO2) films for use in dye-sensitized solar cells. Pulsed laser deposition was used to deposit a dense TiO2 layer and laser direct-write was used to deposit porous nc-TiO2 layers of varying thickness. Solar cells made with laser-processed nc-TiO2 layers showed a power conversion efficiency of up to 4.3% under solar illumination. Thicker nc-TiO2 layers increased short circuit current but decreased open circuit voltage, due to increased recombination losses. Laser processing techniques allow conformal deposition of nc-TiO2 without masks or additional patterning steps.
More Related Content
More from ahsanrabbani
Cpm module iii reference
Introduction 1
Network is a technique used for planning and scheduling of large projects in the fields of construction, maintenance, fabrication, purchasing, computer system instantiation, research and development planning etc. There is multitude of operations research situations that can be modeled and solved as network. Some recent surveys reports that as much as 70% of the real-world mathematical programming problems can be represented by network related models. Network analysis is known by many names _PERT (Programme Evaluation and Review Technique), CPM (Critical Path Method), PEP (Programme Evaluation Procedure), LCES (Least Cost Estimating and Scheduling), SCANS (Scheduling and Control by Automated Network System), etc
This chapter will present three of algorithms.
1. PERT & CPM
2. Shortest- route algorithms
3. Maximum-flow algorithms
Assignment iii cpm
ASSIGNMENT III
B Tech 8th Semester
Submit it on or before 20th April 2020
01. Construct a network for each of the activities and their precedence relationships are given below:
Economics of project evaluation for reference cpm module2
This document provides an overview of key concepts in project structure and management, including:
1) It defines a project and explains their unique, non-routine nature requiring organization and resources to complete within a time limit.
2) It outlines the typical stages in a project's lifecycle from conception to implementation and completion.
3) It discusses important characteristics of projects including objectives, uniqueness, complexity, and risk/uncertainty.
4) It categorizes different types of projects based on factors like location, technology, size and scope.
Economics of project evaluation cpm module2
Introduction: The competencies required for developing business cases comprise a range of skills, including those for:
• facilitation and negotiation
• demand management
• risk management
• value management
• economic, social, environmental and budget analyses, and
• strategic planning.
Welded plate girder
A welded plate girder bridge is designed to carry highway traffic. The bridge is 120 feet long with a roadway width of 30 feet. It uses A992 steel for the flanges and A709 Grade 50 steel for the web and connection plates.
Column splices design
This document discusses two column splice design examples. The first example covers column splice design while the second example also focuses on column splice design. Both examples provide information on designing column splices for structural columns.
Beam column design
This document provides two examples of beam-column design. The first example details the design of a reinforced concrete beam-column connection. The second example also examines the design of a beam-column connection, though it is unclear if this refers to another reinforced concrete example or a different material. Both examples are intended to demonstrate the process of designing beam-column connections.
Design of steel structure as per is 800(2007)
It does not offer resistance against rotation and also termed as a hinged or pinned connections.
It transfers only axial or shear forces and it is not designed for moment
It is generally connected by single bolt/rivet and therefore full rotation is allowed
Notification jr fellow
The document announces a posting for a Junior Research Fellow position with a monthly stipend of Rs.12,000 plus housing allowance. The 3-year project funded by the Department of Atomic Energy seeks applicants with an M.Sc. in Mathematics and at least a 6.5 CGPA or equivalent in Graph Theory. Preference will be given to those who have qualified the UGC NET examination after 2005. Applicants should submit details by September 22nd to Dr. A. Vijayakumar.
Mba fulltime semester i
The document outlines the syllabus for the first semester of an MBA fulltime program. It includes 7 core courses covering topics such as management concepts, quantitative methods, managerial economics, business environment, business communication, financial accounting, and information technology for managers. Each course is broken down into 5 modules and includes objectives, detailed outlines, and recommended readings. The courses aim to provide foundational business knowledge and skills to MBA students.
Mba adv-(2011-12)
The document announces the invitation of applications for admission to the MBA program at the National Institute of Technology Karnataka for the 2011-2012 academic year. Indian citizens can download the application form starting January 3, 2011 from the NITK website and submit the completed form along with a DD for Rs. 600 by March 31, 2011. Eligibility for the full-time 2-year MBA program requires a bachelor's degree from a recognized university with over 55% aggregate marks, or 50% for SC/ST applicants. Admission will be based on the applicant's CAT 2010 score and performance in a group discussion and interview at the institute.
Infor bullet-mba-2011-12
This document provides information about the Master of Business Administration (MBA) program for 2011-2012 at the National Institute of Technology Karnataka in Surathkal, India. It details the minimum qualifications required for admission, which include a bachelor's degree in any discipline with over 55% marks and a valid CAT score. Selection is based 90% on the CAT score and 10% on performance in a group discussion and interview. The two-year full-time MBA program will begin in the fall of 2011 and the intake is limited to a certain number of students.
Form1
The document appears to be an application form for admission to postgraduate programs (Ph.D., M.Des., M.S.(Research), and M.Tech.) at the Indian Institute of Technology Delhi. It requests information such as the applicant's personal details, educational qualifications, GATE/CEED scores, work experience, proposed area of research, department/program choices, and payment details. The form also includes instructions for submission of additional documents and notes that incomplete applications may be provisionally accepted pending submission of required documents by specified dates.
Contract lecturers various_depts
Cochin University of Science and Technology is seeking to fill several teaching positions across various departments on a contract basis. The positions include 2 in Applied Chemistry, 2 in Electronics, 4 in Mathematics, 2 in Marine Geology and Geophysics, 1 in School of Industrial Fisheries Economics, 2 in Computer Applications, 1 in Management and 1 in Commerce under the School of Legal Studies, and 1 in International School of Photonics. The minimum qualifications and salaries offered are detailed for each position. Interested candidates should submit applications with full bios and documents to the respective Heads/Directors by September 22, 2010.
Ballia
The document contains a list of 105 dealers in Ballia with their TIN numbers, UPTT numbers, firm names, and addresses. It provides key information about various firms dealing in items like food processing, medical supplies, hardware, grains, and other goods in Ballia, India.
Agr test41
The document announces a written test for the position of Agricultural Assistant with the Spices Board. It provides details such as the date, time, syllabus, and locations of the test. It also lists the names and exam center details of candidates provisionally selected to appear for the written test. The test will be held on November 13, 2010 from 10:30 am to 12 noon at various venues in Kochi. The syllabus covers topics in botany, agriculture/horticulture, and general knowledge.
Advertisement 3rd conclave_2010
The Indian Institute of Information Technology, Allahabad is organizing the Third Science Conclave from December 8-14, 2010. The conclave will feature interactions between students, young teachers, scientists and Nobel laureates as well as other prominent academics and researchers. The goal is to inspire and motivate students to pursue careers in basic sciences and promote scientific development in India. Top students, researchers and young faculty who have not attended the previous conclaves are invited to apply by September 15th by contacting their institution and submitting the application form found on the conclave website.
Adv2011
The document announces admission to various postgraduate and PhD programs for the 2011-2012 academic year at the Indian Institute of Technology Delhi. It lists the departments and programs offering PhD, MTech, MS(Research), and MDes degrees. It provides eligibility criteria including required academic scores and work experience. Various types of financial assistance are available. Important dates for obtaining the application form and submitting the completed application are provided.
33 37 pukird, s
This document summarizes the synthesis and characterization of silicon dioxide (SiO2) nanowires prepared from rice husk ash. SiO2 nanowires were synthesized by thermally evaporating a mixture of rice husk ash and coconut shell charcoal at 1350°C under nitrogen gas. The resulting nanowires were characterized using scanning electron microscopy and X-ray diffraction. The SiO2 nanowires had diameters between 40-200 nm and lengths of a few micrometers. Crystalline SiO2 and silicon carbide structures were observed.
030
This document summarizes research on using laser processing techniques to deposit nanocrystalline titanium dioxide (nc-TiO2) films for use in dye-sensitized solar cells. Pulsed laser deposition was used to deposit a dense TiO2 layer and laser direct-write was used to deposit porous nc-TiO2 layers of varying thickness. Solar cells made with laser-processed nc-TiO2 layers showed a power conversion efficiency of up to 4.3% under solar illumination. Thicker nc-TiO2 layers increased short circuit current but decreased open circuit voltage, due to increased recombination losses. Laser processing techniques allow conformal deposition of nc-TiO2 without masks or additional patterning steps.
More from ahsanrabbani (20)
Economics of project evaluation for reference cpm module2
Economics of project evaluation for reference cpm module2
Ship in
- 1. Programme Dedication of Ship-in-Campus and Inauguration of Modernised University Main Road of the Cochin University of Science and Technology on Saturday 12 February 2011 at 04.30 pm 4.33 Welcome : Sri. N. K. Vasudevan, Convener, Syndicate Works Committee 4.36 About the Ship-in-Campus : Prof. K. A. Simon, Director, KMSME 4.39 Presidential Address : Dr. Ramachandran Thekkedath Hon’ble Vice Chancellor, Cusat 4.44 Dedication of Ship-in-campus : Sri. S. Sharma Hon’ble Minister for Fisheries and Registration 4.54 Inauguration of Modernised : Sri. P. Rajeev University Main Road Member of Parliament 5.04 Keynote Address : Dr. Godfrey Louis Pro-Vice Chancellor, Cusat 5.07 Felicitations : Sri. A. M. Yusuff, M.L.A 5.10 “ : Sri. C. M. Dinesh Mani M.L.A 5.13 “ : Sri. Jamal Manakkadan, Chairman, Kalamasserry Muncipality 5.16 “ : Dr. Joy Job Kulavelil, Member, Syndicate 5.19 “ : Adv. K. Mohanachandran Member, Syndicate 5.22 “ : Sri. C. P. Praveen University Union Chairman 5.25 Vote of Thanks : Dr. N. Chandramohanakumar Registrar, Cusat Venue : Kunjali Marakkar School of Marine Engineering
- 2. The Vice Chancellor and the Syndicate of the Cochin University of Science and Technology cordially invite your esteemed presence at the dedication of the Ship-in-Campus in K M School of Marine Engineering & the inauguration of the Modernised University Main Road on Saturday 12 February 2011 at 4.30p.m. Sri. S.Sharma, Hon’ble Minister for Fisheries and Registration will dedicate the Ship-in-Campus & Sri. P.Rajeev, Member of Parliament will inaugurate the Modernised University Main Road Kochi-22 Sd/- 07-02-2011 Registrar