The document outlines Emery Oleo's management systems and safety programs. It discusses that Emery Oleo has developed 44 standard operating procedures for its OHSAS 18001 certified occupational health and safety management system, which has achieved 95% implementation. It also details the company's process safety management elements, such as process hazard analysis and management of change programs. Finally, it lists Emery Oleo's various employee and community safety programs, including an employee observation suggestion scheme, responsible care signatories, and safety training programs.
secure admission into 200 level without JAMB via IJMB a nine months course that guarantees you admission studying your desired course of study in your desired institution, visit www.ijmbe.org.ng for more information
secure admission into 200 level without JAMB via IJMB a nine months course that guarantees you admission studying your desired course of study in your desired institution, visit www.ijmbe.org.ng for more information
Hybrid topology of asymmetric cascaded multilevel inverter with renewable ene...Asoka Technologies
This paper presents a binary topology of Multimodule level inverters produce a staircase output voltage from renewable DC voltage sources. The MLI (Multi Level Inverter) Requires many number of semiconductor switches is main drawback of multilevel inverters. The MLI can be classified as two method, one is symmetric and another asymmetric converters. In symmetrical multilevel inverter can apply same voltage level to all cascaded circuit, in asymmetric multilevel inverters can be vary input source voltage at each cascaded H-bridge by using binary algorithm. In this paper, a discrete binary topology for multilevel converters is proposed using cascaded sub-multilevel Cells. This sub-multilevel converter can produce sixty three levels of voltage from five discrete DC source. The Total Harmonic Distortions (THD) is minimized by discrete binary topology. The working operation and performance of the proposed multilevel inverters studies has been verified by simulation of using SIMULINK / MA TLAB results.
this gives a detailed description for the bone density consideration during implant placement.
The presentation is available upon request. Mail me at apurvathampi@gmail.com
Enhanced Metadata for Discovery -- Beyond the BasicsBowker
This slide show contains the motivation, expectations and reality of how using enhanced metadata can have a possible effect on the sales and therefore the discovery of a publisher's content. Studies are references and BISG best practices are examined for the submission of enhanced metadata to providers in the supply chain. Focus on the metadata elements and a metadata timeline.
List of additional BIRT reports included with Maximo Oil and Gas/Maximo HSE Manager.
Examples of out of the box BIRT reports included with Maximo Oil and Gas/Maximo HSE Manager.
Saved Queries and KPIs included with Maximo Oil and Gas and HSE Manager.
Examples of Start Centers built using saved queries and KPIs included with Maximo Oil and Gas/Maximo HSE Manager.
This PowerPoint slide gives a brief introduction to OHSAS 18001 and is useful for implementing the standard on your organization.
Ravi Shrestha (Nepal)
Is your safety audit process stale with the organization's business plan?
Avoid the common pitfalls that derail most safety audits.
Identify policies and conditions that cause loss and incidents with the examples here in this presentation.
Build the necessary elements of the written audit document.
Author John Newquist has worked with several of the Fortune 500 companies in auditing safety management systems and best practices to prevent injuries and losses for the last 30 years. This was one session presented in a day long seminar in June 2013.
ISO 45001 is the latest occupational health and safety management system standard which is being developed by the ISO. This standard will replace OHSAS 18001, and set specific requirements for an occupational health and safety management that will enable the organizations toward ensuring safety and health in workplace. This webinar will give you a detailed description of all changes when transitioning from OHSAS 18001 to ISO 45001.
Main points covered:
• Overview of ISO 45001 and reason why the revision of OHSAS 18001 was necessary
• ISO 45001 most significant changes and related standards affected by this change
• Recommendations on what steps to take when going through transition
Presenter:
This webinar was presented by PECB’s Course Development Manager for Health, Safety and Environment, Nysret Lezi.
Link of the recorded webinar published on YouTube: https://youtu.be/SUtF4KusUyE
PROFESSIONAL HIGHLIGHTS: Proven skills to analyze operations, pinpoint areas for improvement and implement plans that generate safety improvements. Experienced in conducting accident investigations. Accomplished ergonomist with technical and procedural experience in program management, assessment, and reporting. Success in forming strong, sustainable relationships among cross-functional teams. Effective communicator, leader, and trainer.
Hybrid topology of asymmetric cascaded multilevel inverter with renewable ene...Asoka Technologies
This paper presents a binary topology of Multimodule level inverters produce a staircase output voltage from renewable DC voltage sources. The MLI (Multi Level Inverter) Requires many number of semiconductor switches is main drawback of multilevel inverters. The MLI can be classified as two method, one is symmetric and another asymmetric converters. In symmetrical multilevel inverter can apply same voltage level to all cascaded circuit, in asymmetric multilevel inverters can be vary input source voltage at each cascaded H-bridge by using binary algorithm. In this paper, a discrete binary topology for multilevel converters is proposed using cascaded sub-multilevel Cells. This sub-multilevel converter can produce sixty three levels of voltage from five discrete DC source. The Total Harmonic Distortions (THD) is minimized by discrete binary topology. The working operation and performance of the proposed multilevel inverters studies has been verified by simulation of using SIMULINK / MA TLAB results.
this gives a detailed description for the bone density consideration during implant placement.
The presentation is available upon request. Mail me at apurvathampi@gmail.com
Enhanced Metadata for Discovery -- Beyond the BasicsBowker
This slide show contains the motivation, expectations and reality of how using enhanced metadata can have a possible effect on the sales and therefore the discovery of a publisher's content. Studies are references and BISG best practices are examined for the submission of enhanced metadata to providers in the supply chain. Focus on the metadata elements and a metadata timeline.
List of additional BIRT reports included with Maximo Oil and Gas/Maximo HSE Manager.
Examples of out of the box BIRT reports included with Maximo Oil and Gas/Maximo HSE Manager.
Saved Queries and KPIs included with Maximo Oil and Gas and HSE Manager.
Examples of Start Centers built using saved queries and KPIs included with Maximo Oil and Gas/Maximo HSE Manager.
This PowerPoint slide gives a brief introduction to OHSAS 18001 and is useful for implementing the standard on your organization.
Ravi Shrestha (Nepal)
Is your safety audit process stale with the organization's business plan?
Avoid the common pitfalls that derail most safety audits.
Identify policies and conditions that cause loss and incidents with the examples here in this presentation.
Build the necessary elements of the written audit document.
Author John Newquist has worked with several of the Fortune 500 companies in auditing safety management systems and best practices to prevent injuries and losses for the last 30 years. This was one session presented in a day long seminar in June 2013.
ISO 45001 is the latest occupational health and safety management system standard which is being developed by the ISO. This standard will replace OHSAS 18001, and set specific requirements for an occupational health and safety management that will enable the organizations toward ensuring safety and health in workplace. This webinar will give you a detailed description of all changes when transitioning from OHSAS 18001 to ISO 45001.
Main points covered:
• Overview of ISO 45001 and reason why the revision of OHSAS 18001 was necessary
• ISO 45001 most significant changes and related standards affected by this change
• Recommendations on what steps to take when going through transition
Presenter:
This webinar was presented by PECB’s Course Development Manager for Health, Safety and Environment, Nysret Lezi.
Link of the recorded webinar published on YouTube: https://youtu.be/SUtF4KusUyE
PROFESSIONAL HIGHLIGHTS: Proven skills to analyze operations, pinpoint areas for improvement and implement plans that generate safety improvements. Experienced in conducting accident investigations. Accomplished ergonomist with technical and procedural experience in program management, assessment, and reporting. Success in forming strong, sustainable relationships among cross-functional teams. Effective communicator, leader, and trainer.
OHSAS 18001 Training | OHSAS 18001 Implementationhimalya sharma
OHSAS 18001 Implementation Training is conducted by Industry Experts,customized for you & connected with relevance to your Industry,products,services & Process
FAA HUMAN FACTOR IN AVIATION MAINTENANCE HF MROAmnat Sk
This manual is in response to the industry’s requests for a simple and manageable list of actions to implement a Maintenance Human Factors (MHF) program. A panel of experts selected the following six topics for such a program to be successful:
Event Investigation
Documentation
Human Factors Training
Shift/Task Turnover
Fatigue Management
Sustaining & Justifying an HF Program
For each of the six topics that contribute to the success of any MHF program, this manual offers the following:
Why is the topic important?
How do you implement it?
How do you know it is working?
Key references
Like any good operator’s manual, this document tells you what to do without excessive description of why you should do it. This manual recognizes you already know the importance of Human Factors. For detailed information, see the “Key References” at the end of each topic.
The selected six topics are critical because they are based on operational data and practical experience from the US and other countries. Transport Canada (TC), United Kingdom Civil Aviation Authority (UK CAA), and the European Aviation Safety Agency (EASA) regulations contributed to this manual. The steps are derived from a panel of ten industry and government contributors who have worked in aviation maintenance for an average of twenty-five years and in MHF for fifteen years. The contributors characterized these six topics and related steps as “information they wish they had known 15 years ago.”
These straightforward suggestions provide the key components for implementing a successful MHF program that will benefit your company, business partners, external customers, and the entire industry. Information is presented in summary bullets as follows:
These are six topics, from many, that a MHF program may consider.
Topics are not necessarily in order of importance, except that the data obtained from Event Investigation (Section 1) provide the foundation for many Human Factors activities.
You may implement any or all of the topics, however, they should be coordinated.
Your MHF activity should be based on the identified requirements and resources of your organization.
You are encouraged to supplement this Operator's Manual with additional references.
This document satisfies the industry request for a short and straightforward list of important actions.
1. www.emeryoleo.com
OHS Management System : OHSAS 18001
1. Part of Management System such as ISO
9001 & EMS 14001
2. Existing SOP developed : 44 SOPs on OHS MS
3. Implementation : 95 %
4. Certification is plan in 2013.
2. www.emeryoleo.com
Process Safety Management Elements
1. Process Hazard Analysis (PHA) : (HAZOP, etc.)
2. Contractor Selection Program
3. Mechanical Integrity and Risk Base
Inspection
4. Management of Change (MOC)
5. Accident Investigation : Accident Incident
Report and Process Safety Accident Report
6. Corporate PS Compliance Audit : Every three
years starting 2011
7. Employees Training Program; Permit To Work
and etc.
8. Pre Start up Safety Review
9. Emergency Preparedness Drills
10. ATEX areas identification & classification
3. www.emeryoleo.com
SHE Programs
1. Employee Observation Suggestion Scheme
(EOSS)
2. Responsible Care Signatories since 1996
3. Annually Responsible Care /SHE Week
4. Daily & Weekly Safety Walk About
5. Monthly SHE Matrix
6. Biannually Community Meeting and Briefing on
SHE issues
7. Job Safety Analysis/HIRADC for Routine and
Unroutine Tasks.
8. SHE Training Programs.
9. SHE Committees Meeting and Inspection
10. HOD Inspections and etc.
11. SHE Induction
12. SISO requirement