1. DEPARTMENT OF MECHANICAL ENGINEERING
CERTIFICATE
It is certified that the Technical Seminar (18RAS84) report, titled as
“Mention your topic in capital” completed by “Mention your name
in capital (USN)”, student of the Department of Mechanical
Engineering, Visvesvaraya Technological University, “Jnana Sangama”,
Belagavi in the partial fulfillment for the award of Bachelor of
Technology in Robotics and Automation of VTU, Belagavi during the
academic year 2023-2024. It is certified that all the
corrections/suggestions have been approved as it satisfies the academic
requirements in respect to the Technical Seminar prescribed by VTU,
Belagavi for the said degree.
Mr. IRANNA SOMAPUR Dr. R. R. MALAGI
Coordinator Chairperson
2. A TECHNICAL SEMINAR REPORT
On
“Mention your topic name”
Submitted In the Partial Fulfillment of the Requirement for the 8th
Semester
BACHELOR OF TECHNOLOGY
In
ROBOTICS AND ROBOTICS
For The Academic Year 2023-24
Submitted By
“Mention your Name in Capital lattes”
(Mention your USN)
Under The Guidance Of
Mr. IRANNA SOMAPUR
Assistant Professor
Department of Mechanical Engineering
VTU, Belagavi
3. DECLARATION
I, “Mention your name in capital (USN)” student of Eighth Semester
B. Tech in Robotics and Automation, Visvesvaraya Technological
University, Belagavi hereby declare that this dissertation entitled
“Mention your topic name” embodies the report of my Technical
Seminar completed at Department of Mechanical Engineering,
Visvesvaraya Technological University, “Jnana Sangama”, Belagavi
during the final semester under the guidance of Mr. Iranna Somapur,
Assistant Professor of Robotics and Automation, Department of
Mechanical Engineering, VTU, Belagavi. This report is submitted in
partial fulfillment of the requirements for the award of Bachelor of
Technology in Robotics and Automation of VTU, Belagavi during the
2023-2024.
Place: Belagavi Mention Your Name in Capital
Date: (USN)
4. ACKNOWLEDGEMENT
I would like to express my gratefulness to almighty God for giving me strength and
wisdom in my work. I have achieved a good amount of knowledge through the research and
the help that I got from many others. I owe my gratitude to all those who made it possible and
made my project course work appreciable forever.
I express my deep sense of gratitude and indebtedness to my Technical
Seminar guide Mr. Iranna Somapur, Assistant Professor of Robotics and Automation,
Department of Mechanical Engineering, V.T.U. Belagavi, for providing precious guidance,
inspiring discussion and constant supervision throughout the course of this work. His timely
help, constructive criticism, and conscientious efforts made it possible to present the work
contained in this thesis.
I would like to express my sincere thanks to Dr. Ravindra R. Malagi, Chairperson,
Department of Mechanical Engineering, V.T.U. Belagavi, for his valuable suggestions, help
and support.
I am also thankful to all the staff members of Department of Mechanical Engineering
and to all my well-wishers for their inspiration and help. Also, I would thank my friends and
family who supported me emotionally as well as academically to complete this Technical
Seminar withoutany obstacles.
