Application photos of recent Roxtec solutions installed at processing facilities.

1. Roxtec MCT Applications
for Mining
Terminal Boxes, Walls & Floors
© Roxtec International AB

2. Roxtec BG B™ Kit Solutions
for Terminal Boxes
• Modules are interchangeable
within the frames, providing
flexibility to meet ever-
changing cable schedules.
• Standardized kits (part
numbers) make specification
and procurement simple.
© Roxtec International AB

3. Multidiameter™ = Flexibility
• “Peelable” layers (Multidiameter™) in
the modules (blue blocks) provide
flexible adaptability to a wide
range of cable O.D.’s.
• Each module has two halves that
install around the cable.
• Roxtec modules are certified as
cable glands
© Roxtec International AB

4. Hole Cuts for 3 x Roxtec CF32 Frames (110 x 216mm)
96 Cable Capacity (O.D. range 3.5mm-16.5mm)
EXe Terminal Box (762 x 762 x 204mm)
© Roxtec International AB

5. Electric Heat Trace Enclosure Prepared for 11 x
Roxtec CF32 Kits to accommodate 220+ cables
© Roxtec International AB

6. 3 x Roxtec CF32 Frames Installed to Terminal Box
Capacity for 96 cables, bottom entry to enclosure
© Roxtec International AB

7. Capacity for 96 SWA or MC cables (3.5mm-16.5mm)
approved for EXe Terminal Box (762x762x204mm)
© Roxtec International AB

8. Single Roxtec CF32 Frame
Capacity for 32 cables (3.5mm-16.5mm) through
bottom-entry to enclosure (260x260x205)
© Roxtec International AB

9. © Roxtec International AB

10. Roxtec GH Frames for Cable Entries through
Pre-Fabricated Walls
© Roxtec International AB

11. Roxtec GH Frames for Cable Entries through
Pre-Fabricated Walls (Crude Oil Pipeline Analyzer Building)
© Roxtec International AB

12. Roxtec GH Frames for Cable Entries through
Pre-Fabricated Walls
© Roxtec International AB

13. Roxtec GH Frames for Cable Entries through
Pre-Fabricated Walls
© Roxtec International AB

14. Roxtec G Frames for Blast-Rated Walls
Cast Installation (Control Room)
© Roxtec International AB

15. Roxtec G Frames for Concrete / Masonry Walls
© Roxtec International AB

16. Roxtec G Frames for Steel-Wall Installation (RIE)
© Roxtec International AB

17. Roxtec for Cable Entries through
Masonry Block Walls
© Roxtec International AB

18. Roxtec G Frames for Retro-Fit in
Cable Transits through Walls
© Roxtec International AB

19. Roxtec G Frames Prepared for Welding
Direct Replacement to Gland Plates (MCC)
© Roxtec International AB

20. Roxtec G Frames for Cable Entries through Floors
Direct Installation to Control Cabinets
© Roxtec International AB

21. Roxtec G Frames for Cable Entries through
Floors in Pre-Fabricated (modular) buildings
© Roxtec International AB

22. Roxtec G Frames for Cable Entries through
Floors in Pre-Fabricated (modular) buildings
© Roxtec International AB

23. Roxtec G Frames for Cable Entries through Floors
Replacing Gland Plates
© Roxtec International AB

24. Roxtec G Frames for Cable Entries through Floors
MV Switchgear
© Roxtec International AB

25. Cable Entry Design Should be
Included in the EPC Scope
Cable Entry as a Cable Entry with Roxtec
OR
Field Decision and EPC Integration
© Roxtec International AB

26. To schedule a technical presentation for your
electrical, controls and instrumentation teams,
simply email:
Allen.Gibson@Roxtec.com
Global Segment Manager
Processing and Heavy Industries
Or to learn more about Roxtec, visit
www.Roxtec.com
© Roxtec International AB