The document appears to be a price list for various sheet materials. It contains over 50 listings for different sizes and prices of KL 361 JF sheet materials, including dimensions, codes, prices and units. The materials come in various widths between 25,000 and 150,000 mm and thicknesses between 40 and 600 euros.
This salesperson commission report summarizes the sales and commissions for Richard Blattenberger from KIA of Baton Rouge for June 2012. It shows that he had total sales of $160,061.74 from 13 vehicle sales. His total commission earned was $3,107.19. After deducting his $2,279.20 in draws and deductions, his net pay was $977.99.
This document summarizes a final presentation for a myoelectric hand project. The team developed a low-cost, lightweight prosthetic hand that meets or exceeds performance specifications. Key features include a 381 gram design with a powered thumb, PID motor control via a microcontroller, and a total estimated cost under $1000 per hand to produce. The team thanks sponsors and advisors for their support in developing this affordable myoelectric hand solution.
This document provides information about Haotech Group, a solar energy company established in 2007 in Hong Kong. It produces over 200 types of solar PV and LED lighting products and sells to over 20 countries. The company has two sales branches in China and one customer service center. It prides itself on strong resources to control quality and costs. The document then provides specifications for various mono-crystalline and poly-crystalline solar module models.
This document shows the third quarter sales figures for Spoke-Up Bicycle Shop across five locations, including sales of bicycles, accessories, repairs, and refreshments. Total sales across all categories and locations was $106,819.97, with repairs contributing the highest amount at $68,222.60.
Ficha inscrição 15 km (respostas) 2set201315kmBenavente
The document contains registration information for various runners participating in a 15km race, including their name, date of birth, gender, event, and registration fee. It lists 27 individual registrations between August 20-September 2, with most paying 7 Euros to run 15km, though some participated for free or in a walking event.
The document provides an inventory analysis breakdown of various equipment for a facility totaling $6,618,338.36. It includes percentages and totals for major categories such as the turbine floor at 30% and $1,986,102.20, gearboxes at 6% and $415,418.98, and miscellaneous equipment at 35% and $2,301,050.56. Details are given on specific gearbox, valve, pump, chain, belt drive, and belt items with descriptions, quantities, costs, dimensions and other specifications.
Spoke-up bicycle shop's third quarter sales by category and location are shown. Total sales were $106,819.98, with the largest categories being bicycles at $40,834.55, accessories at $27,388.05, and repairs at $27,162.72. The Frankfort location had the highest total sales of $22,840.38, while the Burr Hills location was second highest at $27,572.35.
The document contains attendance data for an event with a total attendance of 72 people. It shows that for the first 9 sessions, attendance was 66 people or 92% of the total. For the next 10 sessions, attendance dropped to 52 people or 72% of the total. The remaining sessions saw an attendance of 70 people or 97% of the total. It also includes census population data grouped in age ranges from 0-1 to 36+, showing the number and percentage of people in each age group out of a total of 189 people.
This salesperson commission report summarizes the sales and commissions for Richard Blattenberger from KIA of Baton Rouge for June 2012. It shows that he had total sales of $160,061.74 from 13 vehicle sales. His total commission earned was $3,107.19. After deducting his $2,279.20 in draws and deductions, his net pay was $977.99.
This document summarizes a final presentation for a myoelectric hand project. The team developed a low-cost, lightweight prosthetic hand that meets or exceeds performance specifications. Key features include a 381 gram design with a powered thumb, PID motor control via a microcontroller, and a total estimated cost under $1000 per hand to produce. The team thanks sponsors and advisors for their support in developing this affordable myoelectric hand solution.
This document provides information about Haotech Group, a solar energy company established in 2007 in Hong Kong. It produces over 200 types of solar PV and LED lighting products and sells to over 20 countries. The company has two sales branches in China and one customer service center. It prides itself on strong resources to control quality and costs. The document then provides specifications for various mono-crystalline and poly-crystalline solar module models.
This document shows the third quarter sales figures for Spoke-Up Bicycle Shop across five locations, including sales of bicycles, accessories, repairs, and refreshments. Total sales across all categories and locations was $106,819.97, with repairs contributing the highest amount at $68,222.60.
Ficha inscrição 15 km (respostas) 2set201315kmBenavente
The document contains registration information for various runners participating in a 15km race, including their name, date of birth, gender, event, and registration fee. It lists 27 individual registrations between August 20-September 2, with most paying 7 Euros to run 15km, though some participated for free or in a walking event.
The document provides an inventory analysis breakdown of various equipment for a facility totaling $6,618,338.36. It includes percentages and totals for major categories such as the turbine floor at 30% and $1,986,102.20, gearboxes at 6% and $415,418.98, and miscellaneous equipment at 35% and $2,301,050.56. Details are given on specific gearbox, valve, pump, chain, belt drive, and belt items with descriptions, quantities, costs, dimensions and other specifications.
Spoke-up bicycle shop's third quarter sales by category and location are shown. Total sales were $106,819.98, with the largest categories being bicycles at $40,834.55, accessories at $27,388.05, and repairs at $27,162.72. The Frankfort location had the highest total sales of $22,840.38, while the Burr Hills location was second highest at $27,572.35.
The document contains attendance data for an event with a total attendance of 72 people. It shows that for the first 9 sessions, attendance was 66 people or 92% of the total. For the next 10 sessions, attendance dropped to 52 people or 72% of the total. The remaining sessions saw an attendance of 70 people or 97% of the total. It also includes census population data grouped in age ranges from 0-1 to 36+, showing the number and percentage of people in each age group out of a total of 189 people.
This document appears to be a price list containing information about various construction materials including the material, dimensions, support type, product code, granulation, price and unit of packaging. There are listings for different types of materials coded KL 361 JF, KL 371 X, KL 385 JF, PS 8 C, PS 8 A and PS 11 A/C with varying granulation sizes ranging from 30 to 2000. The prices listed range from approximately 23 to 92 Romanian lei per 100 units.
The document discusses Gagemaker's PG-6000 and RG-7000 series gauges which measure the diameters of internal and external threads respectively. It also discusses their Pitch Diameter inspection gauges PD-6000 and PD-8000 series which measure pitch diameters of internal and external threads. The gauges must be preset to a nominal predetermined dimension using various measurement tools. It provides details on the gauges, their code numbers, description and measurement ranges.
This document appears to be a price list or catalog for various abrasive materials including RFM 652, RFS 651, SFK 655, and SFM 656. It includes information on the material type, dimensions, support type, article code, granulation, price, unit, and currency. The terms section provides additional details on the materials and abrasive agents.
This document contains a list of materials for sale including the group, material type, dimensions, support type, product code, granulation size, quantity, price and unit of packaging. There are over 100 listings of various sizes and granulations of material CS 561 priced and packaged by the 100 units. The materials come in different standard dimension sizes ranging from 100x16mm to 150x22mm.
This document contains personal contact information for an individual named Vladislav Vatamaniuc including a phone number. It also lists the company "Euro Issa Company" with no other details provided.
The document discusses various height gauge models from Moore & Wright and other manufacturers such as Trimos and Sylvac. It provides information on the features, measurement ranges and specifications of manual, digital and motorized height gauge models for applications requiring precision measurement. Key details include measurement capacities from 0-300mm to 0-2000mm, resolutions from 0.01mm to 0.02mm, and materials such as hardened stainless steel and granite bases for stability.
The document is a catalog listing various wheel brushes for sale. It provides details on the brushes such as diameter, number of rows, material of the body and bristles. Over 30 different brush models are listed with specifications and product codes. The brushes come in plastic, wood or metal bodies and use various stiffnesses of nylon, horsehair, goat hair or crimped metal filaments. Prices are provided in Euro per unit for each item.
Bowers produces analogue and digital bore gauges for measuring internal diameters between 2-300mm. The analogue gauges use mechanical measurement and the digital gauges add an IP65 rated digital display. Both provide accuracy down to 1 micron, include tungsten carbide measuring faces, and come calibrated with a UKAS certificate. They are supplied individually or in sets with multiple measuring heads, extension rods, and setting rings for accuracy verification.
1. The document appears to be a price list or catalog for construction materials containing over 50 items.
2. Each item lists information such as material, dimensions, grade, size, quantity, price, and unit for various construction profiles.
3. The materials listed include steel profiles under brands FSR 618, MM 650, and SM 611 with various dimensions and granular sizes.
This document appears to be a price list containing 27 products. It lists the product group, material, dimensions, grain size, form, product code, price per unit, currency, and packaging quantity for each product. The products are various sizes and types of construction aggregate made of CS 310 X and CS 310 XF materials.
The document provides information on new products being offered by Osborn International including:
- Abrasive nylon ATB brushes, composite wheel brushes, fineblanking brushes, and diamond superabrasive brushes.
- A MultiZack brush system and glass cleaning brushes for wide face applications.
- Type 27, 28 and 29 abrasives including grinding wheels, cutoff wheels, and flap discs.
- Janitorial products like brooms, mops, dusters, scrub brushes and absorbents.
This document summarizes various hand tools from Moore & Wright Engineers including engineers squares, sliding T-squares, precision engineers squares, and calipers. The squares are made from hardened steel or stainless steel and have precise tolerances. The calipers come in spring joint or firm joint styles and various sizes, with leg lengths ranging from 125mm to 150mm.
The document describes various models of calipers, including vernier calipers, dial calipers, digital calipers, and plastic calipers. It provides information on features, measurement ranges and resolutions, materials, and product codes for each caliper series. The calipers are manufactured according to industry standards and offer precision measurement for workshop and industrial use.
The document provides technical data and specifications for drill pipe assemblies, including dimensions, material properties, and performance metrics for the pipe body, tool joints, and complete drill pipe strings. Tables list measurements and ratings for different pipe sizes, materials, and configurations. The document aims to support reference and selection of drill pipe options but notes that accuracy cannot be guaranteed and no warranties are made regarding results from using the data.
This document is a price list from Kawasaki Motors Europe N.V. - Filiale Italiana for various Kawasaki motorcycle models for 2013. It provides the model name, codes, year, price excluding VAT and price including VAT for each motorcycle. It notes that the listed prices exclude any fitting, registration or depotentiamento kit costs, and that Kawasaki reserves the right to modify prices and technical specifications without notice.
This document provides an inventory report by section of stock keeping units (SKUs) including quantity, total value, and description for each item. It summarizes the inventory for 20 sections and lists a total of 9,121 items with a grand total value of $93,893.82. Key sections include office supplies, lighting/lamps, and janitorial supplies. The 3-page report was generated on March 25, 2013 for the company located at 625 West Redwood St., Baltimore, MD 21201.
This document contains a parts list and pricing for various components of a Toyota Innova with a 2.0 liter engine and manual transmission. It includes prices for body parts like bumpers, glass, lamps, and doors, as well as prices for chassis, engine, and other internal components. The parts are organized by category and include the part number, price in Rupiah, and additional remarks about the part.
This document provides specifications for API drill pipe and tool joint combinations, including:
- Outside diameter, wall thickness, inside diameter, grade, and connection type for various pipe sizes
- Outside diameter, inside diameter, length, and connection number/size for tool joints
- Recommended makeup torque values for different pipe and tool joint combinations
It contains technical specifications for drill pipe and tool joints ranging from 2-3/8 inches to 7 inches in outer diameter.
This document provides recommendations for vehicle maintenance schedules and fluid levels based on manufacturer specifications. It notes that oil levels should be checked weekly and kept between the minimum and maximum marks, and that the correct oil type should be used. Manufacturers may change specifications without notice, so users should regularly consult their owner's manual. Tables then list specifications for various vehicle models and their engine types, capacities, and recommended fluid products.
This document appears to be a price list containing information about various construction materials including the material, dimensions, support type, product code, granulation, price and unit of packaging. There are listings for different types of materials coded KL 361 JF, KL 371 X, KL 385 JF, PS 8 C, PS 8 A and PS 11 A/C with varying granulation sizes ranging from 30 to 2000. The prices listed range from approximately 23 to 92 Romanian lei per 100 units.
The document discusses Gagemaker's PG-6000 and RG-7000 series gauges which measure the diameters of internal and external threads respectively. It also discusses their Pitch Diameter inspection gauges PD-6000 and PD-8000 series which measure pitch diameters of internal and external threads. The gauges must be preset to a nominal predetermined dimension using various measurement tools. It provides details on the gauges, their code numbers, description and measurement ranges.
This document appears to be a price list or catalog for various abrasive materials including RFM 652, RFS 651, SFK 655, and SFM 656. It includes information on the material type, dimensions, support type, article code, granulation, price, unit, and currency. The terms section provides additional details on the materials and abrasive agents.
This document contains a list of materials for sale including the group, material type, dimensions, support type, product code, granulation size, quantity, price and unit of packaging. There are over 100 listings of various sizes and granulations of material CS 561 priced and packaged by the 100 units. The materials come in different standard dimension sizes ranging from 100x16mm to 150x22mm.
This document contains personal contact information for an individual named Vladislav Vatamaniuc including a phone number. It also lists the company "Euro Issa Company" with no other details provided.
The document discusses various height gauge models from Moore & Wright and other manufacturers such as Trimos and Sylvac. It provides information on the features, measurement ranges and specifications of manual, digital and motorized height gauge models for applications requiring precision measurement. Key details include measurement capacities from 0-300mm to 0-2000mm, resolutions from 0.01mm to 0.02mm, and materials such as hardened stainless steel and granite bases for stability.
The document is a catalog listing various wheel brushes for sale. It provides details on the brushes such as diameter, number of rows, material of the body and bristles. Over 30 different brush models are listed with specifications and product codes. The brushes come in plastic, wood or metal bodies and use various stiffnesses of nylon, horsehair, goat hair or crimped metal filaments. Prices are provided in Euro per unit for each item.
Bowers produces analogue and digital bore gauges for measuring internal diameters between 2-300mm. The analogue gauges use mechanical measurement and the digital gauges add an IP65 rated digital display. Both provide accuracy down to 1 micron, include tungsten carbide measuring faces, and come calibrated with a UKAS certificate. They are supplied individually or in sets with multiple measuring heads, extension rods, and setting rings for accuracy verification.
1. The document appears to be a price list or catalog for construction materials containing over 50 items.
2. Each item lists information such as material, dimensions, grade, size, quantity, price, and unit for various construction profiles.
3. The materials listed include steel profiles under brands FSR 618, MM 650, and SM 611 with various dimensions and granular sizes.
This document appears to be a price list containing 27 products. It lists the product group, material, dimensions, grain size, form, product code, price per unit, currency, and packaging quantity for each product. The products are various sizes and types of construction aggregate made of CS 310 X and CS 310 XF materials.
The document provides information on new products being offered by Osborn International including:
- Abrasive nylon ATB brushes, composite wheel brushes, fineblanking brushes, and diamond superabrasive brushes.
- A MultiZack brush system and glass cleaning brushes for wide face applications.
- Type 27, 28 and 29 abrasives including grinding wheels, cutoff wheels, and flap discs.
- Janitorial products like brooms, mops, dusters, scrub brushes and absorbents.
This document summarizes various hand tools from Moore & Wright Engineers including engineers squares, sliding T-squares, precision engineers squares, and calipers. The squares are made from hardened steel or stainless steel and have precise tolerances. The calipers come in spring joint or firm joint styles and various sizes, with leg lengths ranging from 125mm to 150mm.
The document describes various models of calipers, including vernier calipers, dial calipers, digital calipers, and plastic calipers. It provides information on features, measurement ranges and resolutions, materials, and product codes for each caliper series. The calipers are manufactured according to industry standards and offer precision measurement for workshop and industrial use.
The document provides technical data and specifications for drill pipe assemblies, including dimensions, material properties, and performance metrics for the pipe body, tool joints, and complete drill pipe strings. Tables list measurements and ratings for different pipe sizes, materials, and configurations. The document aims to support reference and selection of drill pipe options but notes that accuracy cannot be guaranteed and no warranties are made regarding results from using the data.
This document is a price list from Kawasaki Motors Europe N.V. - Filiale Italiana for various Kawasaki motorcycle models for 2013. It provides the model name, codes, year, price excluding VAT and price including VAT for each motorcycle. It notes that the listed prices exclude any fitting, registration or depotentiamento kit costs, and that Kawasaki reserves the right to modify prices and technical specifications without notice.
This document provides an inventory report by section of stock keeping units (SKUs) including quantity, total value, and description for each item. It summarizes the inventory for 20 sections and lists a total of 9,121 items with a grand total value of $93,893.82. Key sections include office supplies, lighting/lamps, and janitorial supplies. The 3-page report was generated on March 25, 2013 for the company located at 625 West Redwood St., Baltimore, MD 21201.
This document contains a parts list and pricing for various components of a Toyota Innova with a 2.0 liter engine and manual transmission. It includes prices for body parts like bumpers, glass, lamps, and doors, as well as prices for chassis, engine, and other internal components. The parts are organized by category and include the part number, price in Rupiah, and additional remarks about the part.
This document provides specifications for API drill pipe and tool joint combinations, including:
- Outside diameter, wall thickness, inside diameter, grade, and connection type for various pipe sizes
- Outside diameter, inside diameter, length, and connection number/size for tool joints
- Recommended makeup torque values for different pipe and tool joint combinations
It contains technical specifications for drill pipe and tool joints ranging from 2-3/8 inches to 7 inches in outer diameter.
This document provides recommendations for vehicle maintenance schedules and fluid levels based on manufacturer specifications. It notes that oil levels should be checked weekly and kept between the minimum and maximum marks, and that the correct oil type should be used. Manufacturers may change specifications without notice, so users should regularly consult their owner's manual. Tables then list specifications for various vehicle models and their engine types, capacities, and recommended fluid products.
Chinaprecisionslewingbearingsspindlebearingstandembearings2Xing-wen Li
The document appears to list technical specifications for various bearing models including their dimensions, load ratings, and weights. It includes dimensions such as diameter, thickness, and various hole diameters. It provides static and dynamic load ratings along with recommended lubrication methods and weights for each model ranging from size 14 to size 55.
Tokai produces industrial tires for forklifts and other equipment. They offer solid tires that provide outstanding performance, wear resistance, traction and safety compared to pneumatic tires. Tokai invests heavily in research and development to create tires using advanced computer modeling and testing techniques. Their tires use a three-layer compound system in the tread, cushion and base layers to optimize performance properties.
This document provides specifications for Double Shoulder High Torque (DSHT) tool joints and compares them to standard API tool joints. It includes dimensions, mechanical properties, and recommended makeup torques for various pipe sizes. DSHT tool joints offer benefits like higher torsional strength, reduced stress on threads, and increased mud flow, while maintaining interchangeability with API products. They can be used on drill collars, heavy weight drill pipe, and kellys to enable easier repair.
Bảng giá thiết bị : MCCB, MCB, ELCB, RCBO, Contactor, ACB
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
This document appears to be a price list containing information about various building materials. It lists product codes, descriptions, specifications, pricing and other details for over 60 different items. The items are various types of concrete blocks that differ in size, material type and other properties. Pricing is in Euros per unit with units typically coming in packs of 10 blocks. The document seems to have been generated for a customer named Vladislav Vatamaniuc.
The document provides information on engine maintenance and repair for an Arion 630-610C tractor, including:
1. Specifications for torque settings and sealants for engine components.
2. Instructions for inspecting the cylinder head, valves, rocker pins and springs, and measuring valve and guide clearance.
3. Procedures for checking the flatness of the cylinder head and measuring its thickness, as well as the valves, springs, and turbocharger.
This document provides a list of resources (materials, equipment, labor) required for the project "Expansion and Improvement of Water and Sanitation Systems with Wastewater Treatment in Mayocc, San Miguel de Mayocc - Churcampa - Huancavelica", including quantities, units, and unit prices. It includes over 200 line items spanning labor, materials such as pipes, concrete, and equipment like excavators, compactors, and trucks. The total cost of all resources required for this water and sanitation infrastructure project is estimated to be 712,724.22 Soles.
This document provides a price list for electrical equipment manufactured in South Korea, including prices in Vietnamese Dong. It lists various types of circuit breakers, including miniature circuit breakers (MCBs), molded case circuit breakers (MCCBs), air circuit breakers (ACBs), and associated accessories. The price list is effective from April 1, 2012 and prices do not include a 10% VAT tax. It provides the names, amperages, interrupting capacities, and prices of over 100 circuit breaker products.
This document contains payroll information for various employees including their code, base salary, amount sold, regular hours worked, and overtime hours. It lists each employee's code, base salary, amount sold, regular hours worked, and overtime hours. It also contains a sample payslip for employee CCV003 showing their base pay, total for regular and overtime hours, deductions for insurance and AFP (pension fund), and net pay. The document provides payroll and compensation data for multiple employees including their codes, salaries, sales amounts, hours worked, and payslip details for one employee.
This document provides a catalog of motorcycle parts including suspensions, transmissions, engine components, and electrical parts. It lists various motorcycle models and the appropriate parts that fit each model, such as shock absorbers, filters, batteries, and lamps. The parts are organized by manufacturer and model, with specifications including part numbers, voltages, and dimensions. This allows customers to easily find replacement and spare parts for their motorcycles.
This document contains a table of integrated circuit substitutions. It lists original integrated circuits and their substitutable equivalents. Some examples include substituting an OM5232/EBB/554 for a 710.010.024, an SC427359FB for a 710.100.007, and substituting AN241, CA3065, HA1125, KA2101, LA1365, or TA7176 for an AN241. In total, it provides substitution information for over 300 different original integrated circuits.
The document provides information on servicing an engine, including:
1. Descriptions of engine identification, torque settings, and sealants.
2. Checklists for inspecting injectors and recording test results.
3. Instruction sheets for checking hydraulic pressure on different engine circuits and inspecting injectors.
Pricelist kantongan plastik pe kantongan (plastik es) supplier distributor kantongan plastik Surabaya. Harga kantongan plastik pe (plastik es) belum termasuk ongkir, melayani pengiriman ke berbagai kota di Indonesia.
This document summarizes calibration equipment from Sylvac and Trimos. The Sylvac Dial Gauge Calibrator precisely calibrates dial gauges and indicators using a digital readout. The Trimos THV Mini Horizontal Calibration Machine can perform a wide range of internal and external calibration tests using interchangeable probes and accessories to calibrate various measuring instruments. The Trimos Horizon 'H' Series Length Measuring Machine provides portable calibration for workshop use with a rechargeable battery and clearly defined digital display.
The document lists various cables and accessories for connecting Bowers Metrology instruments. It includes over 30 different cable options categorized by code number, connection type, length, compatible instruments, and functionality (e.g. data send only, bi-directional). It also lists several wireless modules and adapters that can enable wireless data transmission from instruments to a USB receiver.
The document contains listings of various tools and prices, organized into multiple sections. It includes listings for rotary hammers, drilling machines, grinding machines, saws, angle grinders, sanders, and more. It also includes listings for SDS plus drill bits and abrasives. Pricing is provided in the local currency. Packages and special offers combining multiple tools are also presented.
Discuri abrazive pe suport hartie, discuri cu fixare automata, discuri cu pri...Vladislav Vatamaniuc
This document appears to be a price list for various construction materials including different types of expanded polystyrene (PS) with specifications on dimensions, grade, granule size and price per unit. It contains over 100 items organized by product code, specifications and price in Romanian lei.
6. Sheet1
13 RO/KL375J/80/S/100X50000 KL 375 J 100X50000 J 266539 € 80.00 23.31 1
13 RO/KL375J/100/S/100X50000 KL 375 J 100X50000 J 266544 € 100.00 22.79 1
13 RO/KL375J/120/S/100X50000 KL 375 J 100X50000 J 266549 € 120.00 22.79 1
13 RO/KL375J/150/S/100X50000 KL 375 J 100X50000 J 266553 € 150.00 22.79 1
13 RO/KL375J/180/S/100X50000 KL 375 J 100X50000 J 266556 € 180.00 22.79 1
13 RO/KL375J/220/S/100X50000 KL 375 J 100X50000 J 266559 € 220.00 24.48 1
13 RO/KL375J/240/S/100X50000 KL 375 J 100X50000 J 266561 € 240.00 24.48 1
13 RO/KL375J/40/S/115X50000 KL 375 J 115X50000 J 266531 € 40.00 30.26 1
13 RO/KL375J/60/S/115X50000 KL 375 J 115X50000 J 266535 € 60.00 26.88 1
13 RO/KL375J/80/S/115X50000 KL 375 J 115X50000 J 266540 € 80.00 25.71 1
13 RO/KL375J/100/S/115X50000 KL 375 J 115X50000 J 266545 € 100.00 25.13 1
13 RO/KL375J/120/S/115X50000 KL 375 J 115X50000 J 266550 € 120.00 25.13 1
13 RO/KL375J/150/S/115X50000 KL 375 J 115X50000 J 278008 € 150.00 25.13 1
13 RO/KL375J/180/S/115X50000 KL 375 J 115X50000 J 278009 € 180.00 25.13 1
13 RO/KL375J/220/S/115X50000 KL 375 J 115X50000 J 278010 € 220.00 25.13 1
13 RO/PL31B/60/S/100X50000 PL 31 B 100X50000 B 3285 € 60.00 21.82 1
13 RO/PL31B/80/S/100X50000 PL 31 B 100X50000 B 3286 € 80.00 19.48 1
13 RO/PL31B/100/S/100X50000 PL 31 B 100X50000 B 3202 € 100.00 17.86 1
13 RO/PL31B/120/S/100X50000 PL 31 B 100X50000 B 3203 € 120.00 17.86 1
13 RO/PL31B/150/S/100X50000 PL 31 B 100X50000 B 3204 € 150.00 17.86 1
13 RO/PL31B/40/S/110X50000 PL 31 B 110X50000 B 3287 € 40.00 31.36 1
13 RO/PL31B/60/S/110X50000 PL 31 B 110X50000 B 3289 € 60.00 23.96 1
13 RO/PL31B/80/S/110X50000 PL 31 B 110X50000 B 3290 € 80.00 21.36 1
13 RO/PL31B/100/S/110X50000 PL 31 B 110X50000 B 3213 € 100.00 19.74 1
13 RO/PL31B/120/S/110X50000 PL 31 B 110X50000 B 3214 € 120.00 19.74 1
13 RO/PL31B/150/S/110X50000 PL 31 B 110X50000 B 3215 € 150.00 19.74 1
13 RO/PL31B/180/S/110X50000 PL 31 B 110X50000 B 3216 € 180.00 19.74 1
13 RO/PL31B/220/S/110X50000 PL 31 B 110X50000 B 3217 € 220.00 19.87 1
13 RO/PL31B/240/S/110X50000 PL 31 B 110X50000 B 3218 € 240.00 21.95 1
13 RO/PL31B/280/S/110X50000 PL 31 B 110X50000 B 3219 € 280.00 21.95 1
13 RO/PL31B/320/S/110X50000 PL 31 B 110X50000 B 3220 € 320.00 21.95 1
13 RO/PL31B/400/S/110X50000 PL 31 B 110X50000 B 3222 € 400.00 22.40 1
13 RO/PL31B/40/S/115X50000 PL 31 B 115X50000 B 3291 € 40.00 31.49 1
13 RO/PL31B/60/S/115X50000 PL 31 B 115X50000 B 3293 € 60.00 25.00 1
13 RO/PL31B/80/S/115X50000 PL 31 B 115X50000 B 3294 € 80.00 22.27 1
13 RO/PL31B/100/S/115X50000 PL 31 B 115X50000 B 3224 € 100.00 20.58 1
13 RO/PL31B/120/S/115X50000 PL 31 B 115X50000 B 3225 € 120.00 20.58 1
13 RO/PL31B/150/S/115X50000 PL 31 B 115X50000 B 3226 € 150.00 20.58 1
13 RO/PL31B/180/S/115X50000 PL 31 B 115X50000 B 3227 € 180.00 20.58 1
13 RO/PL31B/220/S/115X50000 PL 31 B 115X50000 B 3228 € 220.00 20.71 1
13 RO/PL31B/240/S/115X50000 PL 31 B 115X50000 B 3229 € 240.00 21.95 1
13 RO/PL31B/280/S/115X50000 PL 31 B 115X50000 B 3230 € 280.00 22.01 1
13 RO/PL31B/320/S/115X50000 PL 31 B 115X50000 B 3231 € 320.00 22.08 1
13 RO/PL31B/400/S/115X50000 PL 31 B 115X50000 B 3233 € 400.00 22.47 1
13 RO/PL31B/40/S/95X50000 PL 31 B 95X50000 B 3279 € 40.00 26.30 1
13 RO/PL31B/60/S/95X50000 PL 31 B 95X50000 B 3281 € 60.00 20.65 1
13 RO/PL31B/80/S/95X50000 PL 31 B 95X50000 B 3282 € 80.00 18.51 1
13 RO/PL31B/100/S/95X50000 PL 31 B 95X50000 B 3191 € 100.00 17.01 1
Page 6
7. Sheet1
13 RO/PL31B/120/S/95X50000 PL 31 B 95X50000 B 3192 € 120.00 17.01 1
13 RO/PL31B/180/S/95X50000 PL 31 B 95X50000 B 3194 € 180.00 17.01 1
13 RO/PL31B/240/S/95X50000 PL 31 B 95X50000 B 3196 € 240.00 18.25 1
13 RO/PS22F/40/S/110X50000 PS 22 F 110X50000 F 2969 € 40.00 55.91 1
13 RO/PS22F/60/S/110X50000 PS 22 F 110X50000 F 2971 € 60.00 44.35 1
13 RO/PS22F/80/S/110X50000 PS 22 F 110X50000 F 2972 € 80.00 38.77 1
13 RO/PS22F/100/S/110X50000 PS 22 F 110X50000 F 2973 € 100.00 35.39 1
13 RO/PS22F/120/S/110X50000 PS 22 F 110X50000 F 2974 € 120.00 35.39 1
13 RO/PS22F/150/S/110X50000 PS 22 F 110X50000 F 2975 € 150.00 37.60 1
13 RO/PS22F/180/S/110X50000 PS 22 F 110X50000 F 2976 € 180.00 36.82 1
13 RO/PS22F/240/S/110X50000 PS 22 F 110X50000 F 2978 € 240.00 36.82 1
13 RO/PS22F/40/S/115X50000 PS 22 F 115X50000 F 2983 € 40.00 58.51 1
13 RO/PS22F/60/S/115X50000 PS 22 F 115X50000 F 2985 € 60.00 46.36 1
13 RO/PS22F/80/S/115X50000 PS 22 F 115X50000 F 2986 € 80.00 40.45 1
13 RO/PS22F/100/S/115X50000 PS 22 F 115X50000 F 2987 € 100.00 36.95 1
13 RO/PS22F/120/S/115X50000 PS 22 F 115X50000 F 2988 € 120.00 36.95 1
13 RO/PS22F/150/S/115X50000 PS 22 F 115X50000 F 2989 € 150.00 36.95 1
13 RO/PS22F/180/S/115X50000 PS 22 F 115X50000 F 2990 € 180.00 36.95 1
13 RO/PS22F/220/S/115X50000 PS 22 F 115X50000 F 2991 € 220.00 37.34 1
13 RO/PS22F/240/S/115X50000 PS 22 F 115X50000 F 2992 € 240.00 37.34 1
13 RO/PS22F/80/S/150X50000 PS 22 F 150X50000 F 3014 € 80.00 52.79 1
13 RO/PS22F/100/S/150X50000 PS 22 F 150X50000 F 3015 € 100.00 48.05 1
13 RO/PS22F/120/S/150X50000 PS 22 F 150X50000 F 3016 € 120.00 48.05 1
13 RO/PS22F/40/S/200X50000 PS 22 F 200X50000 F 3053 € 40.00 101.04 1
13 RO/PS22F/60/S/200X50000 PS 22 F 200X50000 F 3055 € 60.00 80.13 1
13 RO/PS22F/80/S/200X50000 PS 22 F 200X50000 F 3056 € 80.00 70.39 1
13 RO/PS22F/120/S/200X50000 PS 22 F 200X50000 F 3058 € 120.00 64.22 1
13 RO/PS22F/60/S/95X50000 PS 22 F 95X50000 F 20822 € 60.00 38.25 1
13 RO/PS22F/80/S/95X50000 PS 22 F 95X50000 F 20850 € 80.00 33.57 1
13 RO/PS22F/100/S/95X50000 PS 22 F 95X50000 F 20884 € 100.00 30.84 1
13 RO/PS22F/120/S/95X50000 PS 22 F 95X50000 F 20916 € 120.00 30.52 1
13 RO/PS22F/150/S/95X50000 PS 22 F 95X50000 F 20940 € 150.00 32.14 1
13 RO/PS22F/180/S/95X50000 PS 22 F 95X50000 F 20960 € 180.00 31.56 1
13 RO/PS22N/40/N/115X50000 PS 22 N 115X50000 E 244611 € 40.00 N 33.57 1
13 RO/PS22N/60/N/115X50000 PS 22 N 115X50000 E 244612 € 60.00 N 26.62 1
13 RO/PS22N/80/N/115X50000 PS 22 N 115X50000 E 244613 € 80.00 N 23.25 1
13 RO/PS22N/100/N/115X50000 PS 22 N 115X50000 E 244614 € 100.00 N 21.30 1
13 RO/PS22N/120/N/115X50000 PS 22 N 115X50000 E 244615 € 120.00 N 21.30 1
13 RO/PS22N/150/N/115X50000 PS 22 N 115X50000 E 244616 € 150.00 N 21.30 1
13 RO/PS22N/180/N/115X50000 PS 22 N 115X50000 E 244599 € 180.00 N 21.30 1
13 RO/PS22N/240/N/115X50000 PS 22 N 115X50000 E 244597 € 240.00 N 21.49 1
13 RO/PS29F/80/S/110X50000 PS 29 F 110X50000 F 307878 € 80.00 38.22 1
13 RO/PS29F/100/S/110X50000 PS 29 F 110X50000 F 307879 € 100.00 34.81 1
13 RO/PS29F/120/S/110X50000 PS 29 F 110X50000 F 307880 € 120.00 34.81 1
13 RO/PS29F/150/S/110X50000 PS 29 F 110X50000 F 307881 € 150.00 34.81 1
13 RO/PS29F/180/S/110X50000 PS 29 F 110X50000 F 307882 € 180.00 34.81 1
13 RO/PS29F/220/S/110X50000 PS 29 F 110X50000 F 307883 € 220.00 36.23 1
13 RO/PS29F/60/S/115X50000 PS 29 F 115X50000 F 307884 € 60.00 46.88 1
Page 7
8. Sheet1
13 RO/PS29F/80/S/115X50000 PS 29 F 115X50000 F 302592 € 80.00 41.17 1
13 RO/PS29F/100/S/115X50000 PS 29 F 115X50000 F 307885 € 100.00 37.47 1
13 RO/PS29F/120/S/115X50000 PS 29 F 115X50000 F 302591 € 120.00 37.47 1
13 RO/PS29F/150/S/115X50000 PS 29 F 115X50000 F 307886 € 150.00 37.47 1
13 RO/PS30D/40/S/115X4500/MINI PS 30 D 115X4500 D 174094 € 40.00 MINI 3.77 1
13 RO/PS30D/60/S/115X4500/MINI PS 30 D 115X4500 D 174095 € 60.00 MINI 3.05 1
13 RO/PS30D/80/S/115X4500/MINI PS 30 D 115X4500 D 174096 € 80.00 MINI 2.66 1
13 RO/PS30D/100/S/115X4500/MINI PS 30 D 115X4500 D 174097 € 100.00 MINI 2.47 1
13 RO/PS30D/120/S/115X4500/MINI PS 30 D 115X4500 D 174098 € 120.00 MINI 2.47 1
13 RO/PS30D/150/S/115X4500/MINI PS 30 D 115X4500 D 174099 € 150.00 MINI 2.47 1
13 RO/PS30D/180/S/115X4500/MINI PS 30 D 115X4500 D 174100 € 180.00 MINI 2.47 1
13 RO/PS30D/40/S/115X50000 PS 30 D 115X50000 D 174086 € 40.00 30.71 1
13 RO/PS30D/60/S/115X50000 PS 30 D 115X50000 D 174088 € 60.00 25.00 1
13 RO/PS30D/80/S/115X50000 PS 30 D 115X50000 D 174089 € 80.00 22.40 1
13 RO/PS30D/100/S/115X50000 PS 30 D 115X50000 D 174090 € 100.00 20.65 1
13 RO/PS30D/120/S/115X50000 PS 30 D 115X50000 D 174091 € 120.00 20.65 1
13 RO/PS30D/150/S/115X50000 PS 30 D 115X50000 D 174092 € 150.00 20.65 1
13 RO/PS30D/180/S/115X50000 PS 30 D 115X50000 D 174093 € 180.00 20.65 1
13 RO/PS30D/240/S/115X50000 PS 30 D 115X50000 D 182418 € 240.00 20.91 1
13 RO/PS30D/320/S/115X50000 PS 30 D 115X50000 D 182419 € 320.00 20.91 1
13 RO/PS33C/60/S/110X50000 PS 33 C 110X50000 C 146981 € 60.00 31.04 1
13 RO/PS33C/80/S/110X50000 PS 33 C 110X50000 C 146982 € 80.00 27.40 1
13 RO/PS33C/100/S/110X50000 PS 33 C 110X50000 C 146983 € 100.00 25.06 1
13 RO/PS33C/120/S/110X50000 PS 33 C 110X50000 C 146386 € 120.00 25.06 1
13 RO/PS33B/150/S/110X50000 PS 33 B 110X50000 B 148494 € 150.00 25.06 1
13 RO/PS33B/180/S/110X50000 PS 33 B 110X50000 B 147935 € 180.00 25.06 1
13 RO/PS33B/220/S/110X50000 PS 33 B 110X50000 B 148495 € 220.00 25.45 1
13 RO/PS33B/240/S/110X50000 PS 33 B 110X50000 B 147114 € 240.00 25.45 1
13 RO/PS33B/280/S/110X50000 PS 33 B 110X50000 B 148496 € 280.00 25.45 1
13 RO/PS33B/320/S/110X50000 PS 33 B 110X50000 B 147110 € 320.00 25.45 1
13 RO/PS33B/400/S/110X50000 PS 33 B 110X50000 B 146387 € 400.00 25.45 1
13 RO/PS33C/60/S/115X50000 PS 33 C 115X50000 C 155815 € 60.00 32.47 1
13 RO/PS33C/80/S/115X50000 PS 33 C 115X50000 C 147575 € 80.00 28.70 1
13 RO/PS33C/100/S/115X50000 PS 33 C 115X50000 C 147576 € 100.00 26.43 1
13 RO/PS33C/120/S/115X50000 PS 33 C 115X50000 C 153398 € 120.00 26.43 1
13 RO/PS33B/150/S/115X50000 PS 33 B 115X50000 B 153177 € 150.00 26.43 1
13 RO/PS33B/180/S/115X50000 PS 33 B 115X50000 B 149480 € 180.00 26.43 1
13 RO/PS33B/220/S/115X50000 PS 33 B 115X50000 B 149698 € 220.00 26.62 1
13 RO/PS33B/240/S/115X50000 PS 33 B 115X50000 B 147055 € 240.00 26.62 1
13 RO/PS33B/280/S/115X50000 PS 33 B 115X50000 B 165031 € 280.00 26.62 1
13 RO/PS33B/320/S/115X50000 PS 33 B 115X50000 B 148891 € 320.00 26.62 1
13 RO/PS33B/400/S/115X50000 PS 33 B 115X50000 B 145520 € 400.00 26.62 1
13 RO/PS18E/40/S/115X50000 PS 18 E 115X50000 E 291995 40 30.97 1
13 RO/PS18E/60/S/115X50000 PS 18 E 115X50000 E 267241 60 24.74 1
13 RO/PS18E/80/S/115X50000 PS 18 E 115X50000 E 267267 80 22.53 1
13 RO/PS18E/100/S/115X50000 PS 18 E 115X50000 E 267293 100 20.58 1
13 RO/PS18E/120/S/115X50000 PS 18 E 115X50000 E 267318 120 20.58 1
13 RO/PS18E/150/S/115X50000 PS 18 E 115X50000 E 267336 150 20.58 1
Page 8
9. Sheet1
13 RO/PS18E/180/S/115X50000 PS 18 E 115X50000 E 276361 180 20.58 1
13 RO/LS309XH/40/S/115X50000 LS 309 XH 115x50000 X 255722 40 66.10 1
13 RO/LS309XH/60/S/115X50000 LS 309 XH 115x50000 X 255723 60 57.47 1
13 RO/LS309XH/80/S/115X50000 LS 309 XH 115x50000 X 255724 80 53.51 1
13 RO/LS309XH/100/S/115X50000 LS 309 XH 115x50000 X 255725 100 50.91 1
13 RO/LS309XH/120/S/115X50000 LS 309 XH 115x50000 X 255726 120 50.91 1
13 RO/LS309XH/150/S/115X50000 LS 309 XH 115x50000 X 255727 150 50.91 1
13 RO/LS309XH/180/S/115X50000 LS 309 XH 115x50000 X 256599 180 50.91 1
13 RO/LS309XH/240/S/115X50000 LS 309 XH 115x50000 X 262399 240 51.49 1
13 RO/LS309X/40/S/115X50000 LS 309 X 115x50000 X 243950 40 85.78 1
13 RO/LS309X/60/S/115X50000 LS 309 X 115x50000 X 4426 60 74.42 1
13 RO/LS309X/80/S/115X50000 LS 309 X 115x50000 X 4427 80 69.09 1
13 RO/LS309X/100/S/115X50000 LS 309 X 115x50000 X 4428 100 65.91 1
13 RO/LS309X/120/S/115X50000 LS 309 X 115x50000 X 4429 120 65.91 1
13 RO/LS309X/150/S/115X50000 LS 309 X 115x50000 X 4430 150 65.91 1
13 RO/LS309X/180/S/115X50000 LS 309 X 115x50000 X 250289 180 65.91 1
13 RO/LS309J/60/S/115X50000 LS 309 J 115x50000 J 201845 60 72.86 1
13 RO/LS309J/80/S/115X50000 LS 309 J 115x50000 J 239453 80 67.73 1
13 RO/LS309J/100/S/115X50000 LS 309 J 115x50000 J 4822 100 64.42 1
13 RO/LS309J/120/S/115X50000 LS 309 J 115x50000 J 4823 120 64.42 1
13 RO/LS309J/150/S/115X50000 LS 309 J 115x50000 J 125745 150 64.42 1
13 RO/LS309J/180/S/115X50000 LS 309 J 115x50000 J 215894 180 64.42 1
13 RO/LS309J/220/S/115X50000 LS 309 J 115x50000 J 4826 220 64.42 1
13 RO/LS309JF/60/S/115X50000 LS 309 JF 115x50000 JF 5159 60 72.86 1
13 RO/LS309JF/80/S/115X50000 LS 309 JF 115x50000 JF 5160 80 67.73 1
13 RO/LS309JF/100/S/115X50000 LS 309 JF 115x50000 JF 5161 100 64.42 1
13 RO/LS309JF/120/S/115X50000 LS 309 JF 115x50000 JF 5162 120 64.42 1
13 RO/LS309JF/150/S/115X50000 LS 309 JF 115x50000 JF 5163 150 64.42 1
13 RO/LS309JF/180/S/115X50000 LS 309 JF 115x50000 JF 5164 180 64.42 1
13 RO/LS309JF/220/S/115X50000 LS 309 JF 115x50000 JF 188138 220 65.13 1
13 RO/LS309JF/240/S/115X50000 LS 309 JF 115x50000 JF 5166 240 65.13 1
13 RO/LS309JF/320/S/115X50000 LS 309 JF 115x50000 JF 88980 320 65.13 1
13 RO/LS309JF/400/S/115X50000 LS 309 JF 115x50000 JF 250216 400 65.13 1
13 RO/LS318JF/60/S/115X50000 LS 318 JF 115x50000 JF 285996 60 71.36 1
13 RO/LS318JF/80/S/115X50000 LS 318 JF 115x50000 JF 285749 80 66.30 1
13 RO/LS318JF/100/S/115X50000 LS 318 JF 115x50000 JF 285750 100 63.18 1
13 RO/LS318JF/120/S/115X50000 LS 318 JF 115x50000 JF 285751 120 63.18 1
13 RO/LS318JF/150/S/115X50000 LS 318 JF 115x50000 JF 285752 150 63.18 1
13 RO/LS318JF/180/S/115X50000 LS 318 JF 115x50000 JF 285997 180 63.18 1
13 RO/LS318JF/240/S/115X50000 LS 318 JF 115x50000 JF 285998 240 63.77 1
13 RO/LS318JF/280/S/115X50000 LS 318 JF 115x50000 JF 285999 280 61.95 1
13 RO/LS318JF/320/S/115X50000 LS 318 JF 115x50000 JF 286000 320 63.77 1
13 RO/LS318JF/400/S/115X50000 LS 318 JF 115x50000 JF 286002 400 63.77 1
13 RO/CS310X/24/S/200X50000 CS 310 X 200x50000 X 5663 24 280.45 1
13 RO/CS310X/36/S/200X50000 CS 310 X 200x50000 X 5665 36 184.42 1
13 RO/CS310X/40/S/200X50000 CS 310 X 200x50000 X 5666 40 172.14 1
13 RO/CS310X/60/S/200X50000 CS 310 X 200x50000 X 5668 60 150.00 1
13 RO/CS310X/80/S/200X50000 CS 310 X 200x50000 X 5669 80 138.51 1
Page 9
10. Sheet1
13 RO/CS310X/100/S/200X50000 CS 310 X 200x50000 X 5670 100 132.40 1
13 RO/CS310X/120/S/200X50000 CS 310 X 200x50000 X 5671 120 132.40 1
13 RO/CS310X/150/S/200X50000 CS 310 X 200x50000 X 138493 150 132.40 1
13 RO/CS310X/180/S/200X50000 CS 310 X 200x50000 X 206696 180 132.40 1
PS 22 F ACT – Lemn - Agent de încleiere: Răşină sintetică
Tip granulă: Corund
Înveliş: dens
Termeni Suport: F
PS 22 N – Lemn - Agent de încleiere: Răşină sintetică
Tip granulă: Corund
Înveliş: semideschis
Suport: E
PS 30 D – Vopsele-Lacuri-Chit-Lemn - Agent de încleiere: Răşină sintetică
Tip granulă: Corund
Înveliş: semideschis
Suport: D
LS 309 X – Lemn-Metal - Agent de încleiere: Răşină sintetică
Tip granulă: Corund
Înveliş: dens
Suport: X
LS 309 JF franjurată – Lemn - Agent de încleiere: Răşină sintetică
Tip granulă: Corund
Înveliş: dens
Suport: JF
KL 361 JF – Otel-Inox - Agent de încleiere: Răşină sintetică
Tip granulă: Corund
Înveliş: dens
Suport: JF
NRO 400 – Ino-Metal-Lemn - Agent de încleiere: Răşină sintetică
Page 10