This document is a curriculum vitae for Rezki Firmansyah, who holds a degree in Mechanical Engineering from Andalas University. He has qualifications and certifications in welding inspection, radiographic film interpretation, magnetic particle testing, penetrant testing, and ultrasonic testing. His work experience includes serving as a laboratory assistant at Andalas University and working as an NDT tutor at PT IINDT Indonesia, where he delivered training in non-destructive testing methods.
CAREER SUMMARY
Almost 10 years experience As NDT Technician, QA/QC Engineer or Inspector and Supervisor Construction (Welding, Piping, Structure, and Mechanical) in Yard Fabriacation and Site Erection, Installation Petrochemical, Geothermal, Oil and Gas Project. Well familiar in the preparation of Test Package (Leak Test of Hydro and Pneumatic Test), Reinstatement, Punch list untill commissioning, Inspection of Positve Material Identification (PMI), Witness Preheat and Post Weld Heat Treatment, Maintanance of Interpass temperatur, Technical Reports, Testing Procedures, Documentation and Project Hand-over. Capable of Co-ordination, Supervision, Motivating personnel and doing physical work and other duties the Company may require.
My background education is Bachelor Degree of Naval Architecture Engineering with holder Welding Inspector (B4T Bandung, Indonesia), International Welding Inspection Personnel (IWIP) and ASNT Level II of Radiongraphy Interpreter, Ultrasonic Test, Magnetic Test and Penetrant Test. Beside that, familiar with various national & International codes such as : ASME – B31.1, B31.3 Sec. IX, Sec. VIII, Sec. V, Sec II, API-1104, AWS D1.1 etc.
Mobile no : +628119636999 / +6282310263999
International Passport No : A9582648
Email : ahmad_anbika@yahoo.com
Have good interpersonal skill and communication with others, strong leadership, self motivate, honest, discipline, hard worker, quick learner, self initiative and like to learn any new things.
Have good knowledge with machine tool. Have knowledge about Turbo Machinery (Pump and Turbine), Compressor, Heat Treatment, Fluid Testing Machine, and Piping.
Advance about AutoCAD (2D and 3D) Microsoft Office (Ms Words, Ms Power Point, Ms Excel), Engineering Software Autodesk Inventor.
Have good Knowledge about destructive test (tensil test, bending test, hardness test) and non destructive test (penetrant test).
Have good knowledge about engineering instrument like fernier caliper, micro meter, dial indicator, Block gauge, and Surface Roughness Tester.
CAREER SUMMARY
Almost 10 years experience As NDT Technician, QA/QC Engineer or Inspector and Supervisor Construction (Welding, Piping, Structure, and Mechanical) in Yard Fabriacation and Site Erection, Installation Petrochemical, Geothermal, Oil and Gas Project. Well familiar in the preparation of Test Package (Leak Test of Hydro and Pneumatic Test), Reinstatement, Punch list untill commissioning, Inspection of Positve Material Identification (PMI), Witness Preheat and Post Weld Heat Treatment, Maintanance of Interpass temperatur, Technical Reports, Testing Procedures, Documentation and Project Hand-over. Capable of Co-ordination, Supervision, Motivating personnel and doing physical work and other duties the Company may require.
My background education is Bachelor Degree of Naval Architecture Engineering with holder Welding Inspector (B4T Bandung, Indonesia), International Welding Inspection Personnel (IWIP) and ASNT Level II of Radiongraphy Interpreter, Ultrasonic Test, Magnetic Test and Penetrant Test. Beside that, familiar with various national & International codes such as : ASME – B31.1, B31.3 Sec. IX, Sec. VIII, Sec. V, Sec II, API-1104, AWS D1.1 etc.
Mobile no : +628119636999 / +6282310263999
International Passport No : A9582648
Email : ahmad_anbika@yahoo.com
Have good interpersonal skill and communication with others, strong leadership, self motivate, honest, discipline, hard worker, quick learner, self initiative and like to learn any new things.
Have good knowledge with machine tool. Have knowledge about Turbo Machinery (Pump and Turbine), Compressor, Heat Treatment, Fluid Testing Machine, and Piping.
Advance about AutoCAD (2D and 3D) Microsoft Office (Ms Words, Ms Power Point, Ms Excel), Engineering Software Autodesk Inventor.
Have good Knowledge about destructive test (tensil test, bending test, hardness test) and non destructive test (penetrant test).
Have good knowledge about engineering instrument like fernier caliper, micro meter, dial indicator, Block gauge, and Surface Roughness Tester.
1. CURRICULUM VITAE
REZKI FIRMANSYAH, ST
Degree Holder of Mechanical Engineering
Engineering Faculty of Andalas University
Padang, West Sumatera
GPA : 3.00 / 4.00
Email : rezkifirmansyah1706@gmail.com
No. HP. 0852 63 922 596
DETAIL INFORMATION
Name : Rezki Firmansyah, ST
Gender : Male
Place/Date of Birth : Padang, June 17th, 1990
Nationality : Indonesia
Marital Status : Single
Religion : Islam
Passport No. : A 7211905
Address : Komplek Marchelia Blok A No. 94, Batam Centre
E-mail : rezkifirmansyah1706@gmail.com
Cellular Phone : 0852 63 922 596
Qualifications : I) Academic
Degree holder in Mechanical Engineering
II) Technical / Professional
a. Welding Inspector – B4T (Certificate in Progress)
b. Radiographic film Interpretation – PCN Level II
(PCN number : 331703)
c. Magnetic Particle Testing – ASNT Level II
d. Penetrant Testing – ASNT Level II
e. Ultrasonic Testing – ASNT Level II
f. Radiographic film Interpretation – ASNT Level II
FORMAL EDUCATION
2008 – 2013 : Degree of Mechanical Engineering (S-1) of Engineering Faculty of
Andalas University, Padang, West Sumatera, with GPA 3.00
ACADEMIC EXPERIENCE
Laboratory assistance :
2011 – 2013 : Assitance of Metallurgy Laboratory, Mechanical Engineering of Andalas
University
2. TRAINING and APRENTICESHIP
Institution : Balai BesarBahan dan Barang Teknik (B4T)
Program : Welding Inspector
Date of Issued : 24 November 2016
Location : Bandung – Indonesia
Remarks : Familiar with AWS D1.1, ASME (Section I, II, V, VIII,
IX) API 1104, API 650, ASME B31.1, and B31.3, ISO
5817, ISO 13916, ISO 287
Institution : Indonesian Institute Of Non Destructive Testing
Program : Radiographic Film Interpretation
Date of Issued : January 12th 2016
Location : Batam – Indonesia
Remarks : Have knowledge about ISO 17636-1
Institution : Indonesian Institute Of Non Destructive Testing
Program : NDT Training Package of MT, PT and UT
Date of Issued : February 11th 2014
Location : Batam – Indonesia
Remarks : Familiar with ASME V, AWS D1.1 for acceptance
criteria MT, PT, UT, and RT
JOB EXPERIENCE
January 2014 - March 2016 : PT IINDT Indonesia
As an NDT Tutor
Nature of work :
Deliver training of the highest standard to students in the MT, PT,
UT, and RI method.
Plan and organize the preparation of training material prior to start
of a course to ensure that material and equipment available and
appropriate.
To check, monitor, and asses student’s work and give any
constructive feedback that is necessary on their performance and to
ensure the minimum standard is attained.