Resume
•
0 likes•10 views
Rushab Bhimani is seeking an internship in analog IC design for summer 2020. He has a Bachelor's degree in Electrical Engineering from Jadavpur University in India and is currently pursuing a Master's degree in Electrical Engineering at Texas A&M University. He has relevant coursework in areas like VLSI circuit design, digital IC design, and microprocessors. He has technical skills in tools like Cadence Virtuoso, MATLAB, C/C++, Python, Verilog, and Java. He has work experience as an Electrical Maintenance Engineer at Reliance Industries and has completed projects involving automatic streetlight control, traffic light control, and condition monitoring of insulators.
Report
Share
Report
Share
Download to read offline
Recommended
Mayur khatri cv
Mayur Khatri is an experienced data analytics consultant seeking new opportunities. He has skills in Python, Pandas, Power BI, SQL, and predictive modeling. Previously he worked as an IoT engineer monitoring gas boilers and as an electrical engineer testing equipment and conducting condition monitoring. He has a B.E. in Electrical Engineering and diploma in electrical engineering with experience in projects involving smart energy meters and transformer fault detection.
Home Energy Monitoring System Using Internet of Things
This paper presents home energy varying time to time and date vise in graphical representation when ever required through internet. The proposed system evolves the home energy to the next level we can see the data using internet. We should login to access the data by this our data is safe and not hack able. We can see the data on the daily basis check for alteration in the current voltage, temperature, light values for respective loads connected to the system.
Survey on use of datamining
This document summarizes a survey on the use of data mining in the electrical field. It discusses how data mining can be used for electricity usage analysis, consumption monitoring, and wastage reduction. The document then outlines several past studies that applied various data mining algorithms like k-means, regression trees, and neural networks to electricity consumption data. It proposes a new idea to control unconsumed electricity using sensors and a fuzzy logic algorithm to adjust light intensity based on parameters like light color, sunlight, and temperature in order to reduce electricity bills.
Aparna Arya_Resume
Aparna Arya is a B.Tech student in Electrical Engineering at IIT Gandhinagar. She has worked on several research projects related to router designs for Network on Chip architectures under Professor Joycee Mekie. These projects involved implementing and comparing different router architectures using Verilog and FPGA. She has also published papers on this topic. Aparna has skills in circuit design, programming, and microprocessors. She has held leadership roles such as research project mentor and captain of the women's badminton team at IIT Gandhinagar.
Resume-2
Haopu Lu is seeking a full-time position in electrical engineering, specifically in power systems, power electronics, renewable energy, and control theory. He has a M.S. in Electrical Engineering from Illinois Institute of Technology and a B.S. in Automation from Northwestern Polytechnical University in China. His technical skills include programming languages like C/C++ and tools like MATLAB. He has relevant coursework in power systems analysis, control systems, power electronics, and sustainable energy. His internship experience was with China Telecom Group and his projects include work in power system control, power market forecasting, gene reconstruction using genetic algorithms, and designing electronic circuits and C++ programs.
Resume
Vinay Kumar Suryadevara is seeking a full-time position in controls, diagnostics, battery design or software implementation and verification. He has a Master's degree in Electrical and Computer Engineering from IUPUI and relevant experience in research, software engineering, and networking. His background includes work on projects involving cruise control systems, electronic throttle control, NOx emission control, fall detection, 3D printing algorithms, and tennis game prediction.
Mounika yakasiri Resume
Mounika Yakasiri is a Master's student in Computer Engineering at Stevens Institute of Technology with a 3.78 GPA. She received her Bachelor's degree in Electronics and Communication Engineering from PES University in India, specializing in VLSI and embedded systems. Her professional experience includes working as an electrical engineering intern developing Bluetooth sensors and as an Android testing intern. Her skills include programming in C, C++, Python, and Verilog HDL, as well as protocols like MQTT and Bluetooth Low Energy. She has completed academic projects involving environmental sensing with Arduino and Raspberry Pi, and developing a full stack cryptocurrency website. She has also published work on wind speed forecasting using Markov chains.
Energy & Power Signals |Solved Problems|
This document discusses energy and power signals in digital signal processing. It contains 5 problems related to classifying different types of signals based on their energy and power. The document is part of a course on digital signal processing and its applications taught at the National Engineering College in Kovilpatti, India.
Recommended
Mayur khatri cv
Mayur Khatri is an experienced data analytics consultant seeking new opportunities. He has skills in Python, Pandas, Power BI, SQL, and predictive modeling. Previously he worked as an IoT engineer monitoring gas boilers and as an electrical engineer testing equipment and conducting condition monitoring. He has a B.E. in Electrical Engineering and diploma in electrical engineering with experience in projects involving smart energy meters and transformer fault detection.
Home Energy Monitoring System Using Internet of Things
This paper presents home energy varying time to time and date vise in graphical representation when ever required through internet. The proposed system evolves the home energy to the next level we can see the data using internet. We should login to access the data by this our data is safe and not hack able. We can see the data on the daily basis check for alteration in the current voltage, temperature, light values for respective loads connected to the system.
Survey on use of datamining
This document summarizes a survey on the use of data mining in the electrical field. It discusses how data mining can be used for electricity usage analysis, consumption monitoring, and wastage reduction. The document then outlines several past studies that applied various data mining algorithms like k-means, regression trees, and neural networks to electricity consumption data. It proposes a new idea to control unconsumed electricity using sensors and a fuzzy logic algorithm to adjust light intensity based on parameters like light color, sunlight, and temperature in order to reduce electricity bills.
Aparna Arya_Resume
Aparna Arya is a B.Tech student in Electrical Engineering at IIT Gandhinagar. She has worked on several research projects related to router designs for Network on Chip architectures under Professor Joycee Mekie. These projects involved implementing and comparing different router architectures using Verilog and FPGA. She has also published papers on this topic. Aparna has skills in circuit design, programming, and microprocessors. She has held leadership roles such as research project mentor and captain of the women's badminton team at IIT Gandhinagar.
Resume-2
Haopu Lu is seeking a full-time position in electrical engineering, specifically in power systems, power electronics, renewable energy, and control theory. He has a M.S. in Electrical Engineering from Illinois Institute of Technology and a B.S. in Automation from Northwestern Polytechnical University in China. His technical skills include programming languages like C/C++ and tools like MATLAB. He has relevant coursework in power systems analysis, control systems, power electronics, and sustainable energy. His internship experience was with China Telecom Group and his projects include work in power system control, power market forecasting, gene reconstruction using genetic algorithms, and designing electronic circuits and C++ programs.
Resume
Vinay Kumar Suryadevara is seeking a full-time position in controls, diagnostics, battery design or software implementation and verification. He has a Master's degree in Electrical and Computer Engineering from IUPUI and relevant experience in research, software engineering, and networking. His background includes work on projects involving cruise control systems, electronic throttle control, NOx emission control, fall detection, 3D printing algorithms, and tennis game prediction.
Mounika yakasiri Resume
Mounika Yakasiri is a Master's student in Computer Engineering at Stevens Institute of Technology with a 3.78 GPA. She received her Bachelor's degree in Electronics and Communication Engineering from PES University in India, specializing in VLSI and embedded systems. Her professional experience includes working as an electrical engineering intern developing Bluetooth sensors and as an Android testing intern. Her skills include programming in C, C++, Python, and Verilog HDL, as well as protocols like MQTT and Bluetooth Low Energy. She has completed academic projects involving environmental sensing with Arduino and Raspberry Pi, and developing a full stack cryptocurrency website. She has also published work on wind speed forecasting using Markov chains.
Energy & Power Signals |Solved Problems|
This document discusses energy and power signals in digital signal processing. It contains 5 problems related to classifying different types of signals based on their energy and power. The document is part of a course on digital signal processing and its applications taught at the National Engineering College in Kovilpatti, India.
Resume_Samsung(revised)
This document provides a summary of Abishek Subramanian's qualifications, including his contact information, objective, education, academic projects, technical skills, internship experience, and work experience. He is seeking an internship in signal processing and communications for summer and fall 2016. He holds an M.S. in Electrical Engineering from UT Dallas and a B.E. in Electrical and Electronics from Manipal Institute of Technology in India. His academic projects involved signal processing, communications, and speech recognition topics. He has skills in MATLAB, Simulink, programming languages, and technical software. Past internship experience was at Schneider Electric and work experience was as a maintenance engineer at a sports complex.
resume
Sharath Kumar Kanniyappan has experience in renewable energy and vehicular technology research, electrical engineering, and power systems design. He received a Master of Science degree in Electrical Engineering from the University of Texas at Arlington, where he conducted research on microgrid simulation and demand control. His technical skills include MATLAB, Simulink, PLECS, AutoCAD, CUDA, Powerworld, and he has published papers on electrical engineering topics.
Generation of Higher Number of Voltage Levels by Stacking Inverters of Lower ...
This paper proposes a new method of generating higher number of levels in the voltage waveform by stacking multilevel converters with lower voltage space vector structures. An important feature of this stacked structure is the use of low voltage devices while attaining higher number of levels. This will find extensive applications in electric vehicles since direct battery drive is possible. The voltages of all the capacitors in the structure can be controlled within a switching cycle using the switching state redundancies (pole voltage redundancies). This helps in reducing the capacitor size. Also, the capacitor voltages can be balanced irrespective of modulation index and load power factor. To verify the concept experimentally, a 9-level inverter is developed by stacking two 5-level inverters and an induction motor is run using V/f control scheme. Both steady state and transient results are presented.
BFunsten_Resume
Brad Funsten is an electrical engineering student at California Polytechnic State University expected to graduate in June 2015 with a B.S. and M.S. He has a 3.84 GPA and has made the Dean's List for 6 quarters. His coursework includes digital signal processing, analog/digital filter design, microcontroller programming, and more. He has experience with programming languages like C and C++, software like Cadence Virtuoso, and test equipment like oscilloscopes. For ongoing projects, he is characterizing electrocardiography signals using neural networks and developing a radar monitor for the elderly.
Jessie Santiago Resume 7-24-2016
This document provides a summary of Jessie Lee C. Santiago's resume. It outlines her education at Clemson University where she earned a Master's and Bachelor's degree in Electrical Engineering. It also lists her publications, technical proficiencies in software and hardware, coursework, work experience as an EE Designer and Teaching Assistant, and involvement in IEEE Robotics.
Resume Chaudhry
Chaudhry Samiullah Ahmad is seeking an internship as an Electrical Engineer. He is currently studying for a Bachelor of Science in Electrical Engineering at Illinois Institute of Technology with a 3.2 GPA and expected graduation in December 2016. His skills include programming languages like MATLAB and JAVA as well as engineering skills like circuit design. He has experience formulating signal analysis, optimizing smart grids, fuel cell modeling, and GIS mapping software.
Resume new
Raunak Kashyap received a Bachelor of Technology degree in Electrical and Electronics Engineering from Manipal Institute of Technology in 2017. He has work experience as a Graduate Engineer Trainee at Reliance Industries Limited and an internship at Bharat Sanchar Nigam Limited. His academic projects include developing a microcontroller-based protection system for three-phase induction motors and a fire rescue system for railways using sensors and a microcontroller. Raunak has skills in programming languages like C, C++, and Java, as well as hardware like Arduino and 8051 microcontrollers. He has received several certificates and prizes for his academic work and presentations.
resume_Weizhen Sun 16
Weizhen Sun is seeking a position as an electrical engineer with experience in power electronics. She has a Master's degree in electrical engineering from Virginia Tech with a 3.7 GPA. Her experience includes two years designing and optimizing magnetic components as well as knowledge of embedded power management, DC/DC converters, and power module reliability analysis using simulation tools like ANSYS. She is proficient in software like MATLAB, AutoCAD, and LabVIEW.
instrument engineer
This document contains the resume of S. Vinu seeking a position as an instrumentation engineer. He has a Master's degree in Power Electronics and a Bachelor's degree in Electronics and Instrumentation. His strengths include patience, leadership, quantitative analysis, and a willingness to learn. He has experience with calibration, sensors, PIC microcontrollers, DCS fundamentals, and MATLAB. His projects include a wireless data acquisition and control system for oil and gas installations using Zigbee, and a ZVS interleaved boost converter to charge batteries for electric vehicles. He has participated in workshops on power system skills, multiphase drives, and MATLAB simulation.
Shishupal cover page shishupal 12 copy
This project report was submitted by Shishupal Kumar to Dr. Manikant Kumar, the head of the Department of Electrical and Electronics Engineering, in partial fulfillment of the requirements for a Bachelor of Technology degree in Electrical and Electronics Engineering. The report describes a project on creating a digital home automation system using Arduino and Bluetooth that allows remote control of devices in the home. It was completed under the supervision of Er. Mubashshir H. Ansari in May 2018 at the Institute of Engineering and Technology in Sitapur, India.
Resume_1
Vishal K. Gupta is pursuing a Master of Science in Computer Science and Engineering at the University of Florida with a 4.0 GPA. He has a B.Tech in Electrical Engineering from Indian Institute of Technology Kanpur with a 7.0 GPA. He has over 3 years of professional experience as an Associate Engineer at Qualcomm India Pvt. Ltd. where he worked on software verification of security IPs and debugging firmware. He also has research experience working on fault detection, visual recognition, and condition monitoring of rotating machines using machine learning techniques. He is proficient in languages such as C/C++, Java, Python, and MATLAB.
Basic operation on Signals - Independent Variables |Problem solving technique|
Basic operation on Signals - Independent Variables |Problem solving technique|National Engineering College
This document discusses basic operations that can be performed on digital signals, including time shifting, time folding, time scaling, and amplitude scaling. Time shifting involves delaying or advancing a signal, time folding involves repeating a signal, and time scaling involves compressing or expanding the time axis of a signal. The document also briefly mentions performing arithmetic operations and multiple operations on dependent signal variables.Wsn based smart sensors and actuator for power management in intelligent buil...
The document describes a smart monitoring and controlling system for household electrical appliances that uses wireless sensor networks. The system monitors voltage, current, and power consumption of appliances in real time. It then implements different controlling mechanisms for appliances to provide low-cost and flexible power management. Experimental testing of a prototype produced encouraging results for saving electricity expenses.
Static & Dynamic Systems |Solved problems|
Systems can be classified as either static or dynamic based on how their outputs change over time in response to inputs. Static systems always produce the same output for a given input, regardless of time, while dynamic systems have outputs that change with time even if the inputs remain constant. This document discusses the classification of systems as static or dynamic and provides examples of problems involving each type.
Resume
Himanshu Vaidya is seeking opportunities as an electrical engineer with skills in power distribution, design, and coding. He has a Master's degree in Electrical Engineering from Cleveland State University and a Bachelor's degree from the University of Mumbai. His experience includes research on creating digital signatures for printed circuit boards and internships configuring PLC systems and designing VLSI circuits. His academic projects focused on power flow design, short circuit studies, and image in-painting using pyramids. Himanshu has skills in programming, software, and circuit design and holds a certification in VLSI CAD.
Carlson vagus-nerve-stimulation-finite-element-model
The document describes a finite element model of a vagus nerve stimulator. The model was built using COMSOL CAD software to simulate the electric potential generated by a helical cathode and anode placed around a modeled vagus nerve. The model allows over a dozen parameters to be varied and solves faster than models built with third party CAD software. Slice plots and contour plots show the electric potential distribution within the nerve fascicles during stimulation.
Resume
This resume is for Subhransu Satpathy, who is currently pursuing an M.S. in Electrical Engineering at the Indian Institute of Technology Madras. His research focuses on designing and controlling DC-DC power converters. He is currently working on developing a programmable high voltage DC-DC converter for capacitive load applications funded by ISRO. Satpathy has work experience in designing power supplies and has taught courses as a teaching assistant in electrical machines and digital control systems for power applications.
Resume
This document is a resume for FNU Rauank. It summarizes his education and work experience. He is currently pursuing a Master of Science in Computer Engineering at Arizona State University with a anticipated graduation date of May 2021. Previously, he earned a Bachelor of Technology in Electrical and Electronics Engineering from Manipal Institute of Technology in July 2017. For work experience, he worked as a Manager at Reliance Industries Limited in India from Aug 2017 - Jul 2018 where he implemented various process improvements. The resume also lists two academic projects, presentations and awards, extracurricular activities including volunteer work, and technical skills.
resume v 5.0
This document is a resume for Ye Xu, who has 5 years of experience in software engineering, data engineering, and data science. Xu developed efficient solutions for embedded systems and real-time computer resource management, and has experience building data pipelines and using machine learning on large datasets. Current areas of research interest include combining real-time systems with big data in fields like the Internet of Things.
2nd ppt
This document describes a wireless data acquisition system for induction motors that was developed by a group of 6 students and their project guide. The system uses a single phase induction motor, Zig-Bee router, current transformer, voltage transformer, Atmel microcontroller, encoder, and Borland Delphi 7.0 software to wirelessly acquire motor data. It then provides details on the components used, including specifications of the induction motor, Zig-Bee router, current transformer, voltage transformer, microcontroller, and encoder. Finally, it lists the component costs and gives the total approximate price of the system.
Resume Updaated
Rakesh Podder is currently pursuing his Electrical Engineering degree at Indian Institute of Technology Patna, where he has maintained a CPI of 7.47/10. He has experience in designing a low-cost wave generator, home automation system using Bluetooth, advanced health monitoring sensor network, and applying image segmentation to disease diagnosis. His minor projects include a line follower robot built with Arduino and a hydraulic robotic arm. He has received several academic awards and scholarships. Rakesh has also completed internships in a thermal power plant and telecommunications training.
Dipak_CV
The document is a curriculum vitae for Dipak Kumar Saha that summarizes his educational and professional background. It details that he is currently pursuing a Master of Technology degree in Renewable Energy Science & Technology from Indian Institute of Engineering Science and Technology, Shibpur, and previously received a B.Tech in Electrical Engineering. It provides information on his work experience developing solar energy systems, research projects in areas like grid-tied inverters and remote monitoring, and publications in energy conferences.
More Related Content
What's hot
Resume_Samsung(revised)
This document provides a summary of Abishek Subramanian's qualifications, including his contact information, objective, education, academic projects, technical skills, internship experience, and work experience. He is seeking an internship in signal processing and communications for summer and fall 2016. He holds an M.S. in Electrical Engineering from UT Dallas and a B.E. in Electrical and Electronics from Manipal Institute of Technology in India. His academic projects involved signal processing, communications, and speech recognition topics. He has skills in MATLAB, Simulink, programming languages, and technical software. Past internship experience was at Schneider Electric and work experience was as a maintenance engineer at a sports complex.
resume
Sharath Kumar Kanniyappan has experience in renewable energy and vehicular technology research, electrical engineering, and power systems design. He received a Master of Science degree in Electrical Engineering from the University of Texas at Arlington, where he conducted research on microgrid simulation and demand control. His technical skills include MATLAB, Simulink, PLECS, AutoCAD, CUDA, Powerworld, and he has published papers on electrical engineering topics.
Generation of Higher Number of Voltage Levels by Stacking Inverters of Lower ...
This paper proposes a new method of generating higher number of levels in the voltage waveform by stacking multilevel converters with lower voltage space vector structures. An important feature of this stacked structure is the use of low voltage devices while attaining higher number of levels. This will find extensive applications in electric vehicles since direct battery drive is possible. The voltages of all the capacitors in the structure can be controlled within a switching cycle using the switching state redundancies (pole voltage redundancies). This helps in reducing the capacitor size. Also, the capacitor voltages can be balanced irrespective of modulation index and load power factor. To verify the concept experimentally, a 9-level inverter is developed by stacking two 5-level inverters and an induction motor is run using V/f control scheme. Both steady state and transient results are presented.
BFunsten_Resume
Brad Funsten is an electrical engineering student at California Polytechnic State University expected to graduate in June 2015 with a B.S. and M.S. He has a 3.84 GPA and has made the Dean's List for 6 quarters. His coursework includes digital signal processing, analog/digital filter design, microcontroller programming, and more. He has experience with programming languages like C and C++, software like Cadence Virtuoso, and test equipment like oscilloscopes. For ongoing projects, he is characterizing electrocardiography signals using neural networks and developing a radar monitor for the elderly.
Jessie Santiago Resume 7-24-2016
This document provides a summary of Jessie Lee C. Santiago's resume. It outlines her education at Clemson University where she earned a Master's and Bachelor's degree in Electrical Engineering. It also lists her publications, technical proficiencies in software and hardware, coursework, work experience as an EE Designer and Teaching Assistant, and involvement in IEEE Robotics.
Resume Chaudhry
Chaudhry Samiullah Ahmad is seeking an internship as an Electrical Engineer. He is currently studying for a Bachelor of Science in Electrical Engineering at Illinois Institute of Technology with a 3.2 GPA and expected graduation in December 2016. His skills include programming languages like MATLAB and JAVA as well as engineering skills like circuit design. He has experience formulating signal analysis, optimizing smart grids, fuel cell modeling, and GIS mapping software.
Resume new
Raunak Kashyap received a Bachelor of Technology degree in Electrical and Electronics Engineering from Manipal Institute of Technology in 2017. He has work experience as a Graduate Engineer Trainee at Reliance Industries Limited and an internship at Bharat Sanchar Nigam Limited. His academic projects include developing a microcontroller-based protection system for three-phase induction motors and a fire rescue system for railways using sensors and a microcontroller. Raunak has skills in programming languages like C, C++, and Java, as well as hardware like Arduino and 8051 microcontrollers. He has received several certificates and prizes for his academic work and presentations.
resume_Weizhen Sun 16
Weizhen Sun is seeking a position as an electrical engineer with experience in power electronics. She has a Master's degree in electrical engineering from Virginia Tech with a 3.7 GPA. Her experience includes two years designing and optimizing magnetic components as well as knowledge of embedded power management, DC/DC converters, and power module reliability analysis using simulation tools like ANSYS. She is proficient in software like MATLAB, AutoCAD, and LabVIEW.
instrument engineer
This document contains the resume of S. Vinu seeking a position as an instrumentation engineer. He has a Master's degree in Power Electronics and a Bachelor's degree in Electronics and Instrumentation. His strengths include patience, leadership, quantitative analysis, and a willingness to learn. He has experience with calibration, sensors, PIC microcontrollers, DCS fundamentals, and MATLAB. His projects include a wireless data acquisition and control system for oil and gas installations using Zigbee, and a ZVS interleaved boost converter to charge batteries for electric vehicles. He has participated in workshops on power system skills, multiphase drives, and MATLAB simulation.
Shishupal cover page shishupal 12 copy
This project report was submitted by Shishupal Kumar to Dr. Manikant Kumar, the head of the Department of Electrical and Electronics Engineering, in partial fulfillment of the requirements for a Bachelor of Technology degree in Electrical and Electronics Engineering. The report describes a project on creating a digital home automation system using Arduino and Bluetooth that allows remote control of devices in the home. It was completed under the supervision of Er. Mubashshir H. Ansari in May 2018 at the Institute of Engineering and Technology in Sitapur, India.
Resume_1
Vishal K. Gupta is pursuing a Master of Science in Computer Science and Engineering at the University of Florida with a 4.0 GPA. He has a B.Tech in Electrical Engineering from Indian Institute of Technology Kanpur with a 7.0 GPA. He has over 3 years of professional experience as an Associate Engineer at Qualcomm India Pvt. Ltd. where he worked on software verification of security IPs and debugging firmware. He also has research experience working on fault detection, visual recognition, and condition monitoring of rotating machines using machine learning techniques. He is proficient in languages such as C/C++, Java, Python, and MATLAB.
Basic operation on Signals - Independent Variables |Problem solving technique|
Basic operation on Signals - Independent Variables |Problem solving technique|National Engineering College
This document discusses basic operations that can be performed on digital signals, including time shifting, time folding, time scaling, and amplitude scaling. Time shifting involves delaying or advancing a signal, time folding involves repeating a signal, and time scaling involves compressing or expanding the time axis of a signal. The document also briefly mentions performing arithmetic operations and multiple operations on dependent signal variables.Wsn based smart sensors and actuator for power management in intelligent buil...
The document describes a smart monitoring and controlling system for household electrical appliances that uses wireless sensor networks. The system monitors voltage, current, and power consumption of appliances in real time. It then implements different controlling mechanisms for appliances to provide low-cost and flexible power management. Experimental testing of a prototype produced encouraging results for saving electricity expenses.
Static & Dynamic Systems |Solved problems|
Systems can be classified as either static or dynamic based on how their outputs change over time in response to inputs. Static systems always produce the same output for a given input, regardless of time, while dynamic systems have outputs that change with time even if the inputs remain constant. This document discusses the classification of systems as static or dynamic and provides examples of problems involving each type.
Resume
Himanshu Vaidya is seeking opportunities as an electrical engineer with skills in power distribution, design, and coding. He has a Master's degree in Electrical Engineering from Cleveland State University and a Bachelor's degree from the University of Mumbai. His experience includes research on creating digital signatures for printed circuit boards and internships configuring PLC systems and designing VLSI circuits. His academic projects focused on power flow design, short circuit studies, and image in-painting using pyramids. Himanshu has skills in programming, software, and circuit design and holds a certification in VLSI CAD.
Carlson vagus-nerve-stimulation-finite-element-model
The document describes a finite element model of a vagus nerve stimulator. The model was built using COMSOL CAD software to simulate the electric potential generated by a helical cathode and anode placed around a modeled vagus nerve. The model allows over a dozen parameters to be varied and solves faster than models built with third party CAD software. Slice plots and contour plots show the electric potential distribution within the nerve fascicles during stimulation.
Resume
This resume is for Subhransu Satpathy, who is currently pursuing an M.S. in Electrical Engineering at the Indian Institute of Technology Madras. His research focuses on designing and controlling DC-DC power converters. He is currently working on developing a programmable high voltage DC-DC converter for capacitive load applications funded by ISRO. Satpathy has work experience in designing power supplies and has taught courses as a teaching assistant in electrical machines and digital control systems for power applications.
Resume
This document is a resume for FNU Rauank. It summarizes his education and work experience. He is currently pursuing a Master of Science in Computer Engineering at Arizona State University with a anticipated graduation date of May 2021. Previously, he earned a Bachelor of Technology in Electrical and Electronics Engineering from Manipal Institute of Technology in July 2017. For work experience, he worked as a Manager at Reliance Industries Limited in India from Aug 2017 - Jul 2018 where he implemented various process improvements. The resume also lists two academic projects, presentations and awards, extracurricular activities including volunteer work, and technical skills.
resume v 5.0
This document is a resume for Ye Xu, who has 5 years of experience in software engineering, data engineering, and data science. Xu developed efficient solutions for embedded systems and real-time computer resource management, and has experience building data pipelines and using machine learning on large datasets. Current areas of research interest include combining real-time systems with big data in fields like the Internet of Things.
2nd ppt
This document describes a wireless data acquisition system for induction motors that was developed by a group of 6 students and their project guide. The system uses a single phase induction motor, Zig-Bee router, current transformer, voltage transformer, Atmel microcontroller, encoder, and Borland Delphi 7.0 software to wirelessly acquire motor data. It then provides details on the components used, including specifications of the induction motor, Zig-Bee router, current transformer, voltage transformer, microcontroller, and encoder. Finally, it lists the component costs and gives the total approximate price of the system.
What's hot (20)
Generation of Higher Number of Voltage Levels by Stacking Inverters of Lower ...
Generation of Higher Number of Voltage Levels by Stacking Inverters of Lower ...
Basic operation on Signals - Independent Variables |Problem solving technique|
Basic operation on Signals - Independent Variables |Problem solving technique|
Wsn based smart sensors and actuator for power management in intelligent buil...
Wsn based smart sensors and actuator for power management in intelligent buil...
Carlson vagus-nerve-stimulation-finite-element-model
Carlson vagus-nerve-stimulation-finite-element-model
Similar to Resume
Resume Updaated
Rakesh Podder is currently pursuing his Electrical Engineering degree at Indian Institute of Technology Patna, where he has maintained a CPI of 7.47/10. He has experience in designing a low-cost wave generator, home automation system using Bluetooth, advanced health monitoring sensor network, and applying image segmentation to disease diagnosis. His minor projects include a line follower robot built with Arduino and a hydraulic robotic arm. He has received several academic awards and scholarships. Rakesh has also completed internships in a thermal power plant and telecommunications training.
Dipak_CV
The document is a curriculum vitae for Dipak Kumar Saha that summarizes his educational and professional background. It details that he is currently pursuing a Master of Technology degree in Renewable Energy Science & Technology from Indian Institute of Engineering Science and Technology, Shibpur, and previously received a B.Tech in Electrical Engineering. It provides information on his work experience developing solar energy systems, research projects in areas like grid-tied inverters and remote monitoring, and publications in energy conferences.
MOHAMMED OVAIZ_Resume -Industry
A. Mohammed Ovaiz is seeking a career in the power industry where he can learn about emerging technologies and take on challenging roles. He has 6 years of teaching experience and 3 years of experience in power sector operations and maintenance. He holds an M.E. in Power Electronics and Drives with high marks and a B.E. in Electrical and Electronics Engineering also with high marks. He has expertise in various power-related fields and has published papers in international journals and conferences.
cv update
This document is a resume for an electrical engineer named M. Sreeram with over one year of experience in renewable energy and electrical substation work. It summarizes his educational background including an MTech in power systems and BTech in electrical engineering. It also lists his professional experience with companies like SunEdison Energy and India Electro Power Controls, summarizing his responsibilities in areas like testing PV controllers, filter design, and substation installation. Technical skills include simulation tools like MATLAB and PSCAD as well as programming languages.
Resume
Bharathram Adithya Murali is seeking a career in power systems engineering. He has a Master's degree in Electrical Engineering from University at Buffalo and a Bachelor's degree from SRM Easwari Engineering College in India. He has experience interning at Globe Metallurgical where he assisted the engineering team and learned various software programs. His academic projects include designing a residential power generation system and automating a factory assembly line using PLC programming.
veeru cv
Veerendra Singh is seeking a position as a principal electrical engineer. He has over 3 years of experience in roles such as site engineer, assistant engineer, and industrial automation engineer. His experience includes projects in areas like circuit design, power engineering, PLC programming, HMI design, and electrical panel design. He holds a B.Tech in Electrical Engineering from Rajasthan Technical University with 63.54% marks. His technical skills include Microsoft OS, MS Office, PLC programming, HMI design, and VFD programming.
Io t internship
The document describes a 5-day internship program organized by the National Power Training Institute (NPTI) on Internet of Things applications in the power and energy sectors. The program will provide both theoretical and hands-on training on topics like IoT architecture, sensors, Arduino and Raspberry Pi programming, cloud computing, and IoT applications for renewable energy, smart metering, and condition monitoring. It will involve lectures, simulations, and projects implementing systems like weather stations and solar monitoring with cloud interfaces. The target audience are college students and engineers, and registration costs Rs. 2,360. The program aims to equip participants with skills for applying IoT in energy management and grid reliability.
Dipak_CV
Dipak Kumar Saha is pursuing a Master of Technology in Renewable Energy Science & Technology from Indian Institute of Engineering Science and Technology, Shibpur. He completed a B.Tech in Electrical Engineering from Kalyani Government Engineering College. His objective is to build a career in a leading corporate environment to fully explore his potential. He has experience developing grid-connected inverters, solar charge controllers, and remote monitoring systems for solar plants. He is currently working on projects involving inverters, MPPT systems, and remote monitoring funded by the Ministry of New and Renewable Energy, Govt. of India. He has published papers on solar monitoring systems and inverters.
Na mpet course nitc
This document announces a short term course on power electronics for grid connected renewable energy systems to be held from May 14-16, 2015 at the National Institute of Technology Calicut. The course aims to address applications of power electronics in industries related to converter topologies, renewable energy integration, and grid integration. It will consist of theoretical sessions and laboratory experiments led by academics and industry professionals. The course is intended to benefit faculty, researchers, students, and industry working in relevant power electronics topics.
Resume ( Pankaj Negi)
Pankaj Negi is seeking a challenging position utilizing his skills and 8 years of teaching experience. He has a Ph.D in progress, M.Tech in Electronics, B.Tech in Instrumentation & Control, and PGDCA. His areas of expertise include renewable energy, analog and digital electronics, and control systems. He has published papers in national and international conferences and journals on topics like full adders and hydro power plant control. He is currently an Assistant Professor researching grid-connected PV systems stability.
Irfan'sResume (1)
Irfan Ali is an electrical engineer from India seeking a position utilizing his skills in engineering design software, 3D printing, electrical and electronics CAD tools, and experience teaching courses and guiding student projects in areas like power systems, renewable energy, and industrial automation during his time as a faculty member and service engineer. He has a Master's in power systems and is proficient in several programming languages and software packages relevant to engineering.
JMS CV new
Abhishek Bhattacharjee is a Ph.D student at IIT Roorkee studying semiconductor devices. He received his M.Tech from NIT Silchar in microelectronics and VLSI design with a CPI of 9.35/10 and B.Tech from NIT Agartala in electronics and communication engineering with a CPI of 8.17/10. His Ph.D project involves modeling attributes of silicon nanowire FETs using TCAD tools. He has worked on GaN HEMTs and published papers on their characteristics. His objective is to pursue a career in teaching and research in electronics and communication engineering.
Joydip jana resume
Joydip Jana is a Renewable Energy Researcher & presently working in the field of Grid Integration of Renewable Energy, Smart Microgrid, Storage Systems including Super Capacitor and Vanadium Redox Battery etc. with Indian Institute of Engineering Science & Technology (IIEST), Shibpur. Currently he is involved in a project “Advanced Research on Thin Film Silicon Solar Cell & PV Systems” funded by Ministry of New and Renewable Energy (MNRE) of Govt. of India and implemented by IIEST, Shibpur. The project includes design, development and field testing of MPPT based high efficiency inverters and grid synchronizing system components used in grid interactive roof top PV systems and design, field-testing and performance evaluation of BIPV system in Indian Institute of Engineering Science & Technology (IIEST), Shibpur, West Bengal, India. He has worked with RRCAT, a centre of Bhaba Atomic Research Centre (BARC), Govt. of India for setting up a Digital Fast Feedback Control System using FPGA for RF Signals in the particle accelerator installed in RRCAT, Indore. He published several papers in different national & international conferences and journal and wrote a book chapter on “Solar PV Power Generation” in “Advances in Solar Energy Science & Engineering, Vol.1” published by National Institute of Solar Energy (NISE), Govt. of India. He was involved in a project for set up 100kW Grid-Tied solar power plant at State Bank of India, Sammridhhi Bhavan, Local Head Office, Kolkata for providing consultancy services for preparation of synopsis of tenders (Technical & Commercial), pre-bid design, drawing & BOQ preparation, vendor selection, site visit, site layout, Engineering drawing preparation, system design with PVSyst software, making mechanical, electrical and structural drawing using AutoCAD software, design, selection of SPV modules and BOS, site supervision and commissioning of the project. He successfully designed, developed & installed solar system in Electric Vehicle application in the year 2015.
JMS CV new
1) Abhishek Bhattacharjee is a Ph.D student at IIT Roorkee studying microelectronics and VLSI. He received his M.Tech from NIT Silchar and B.Tech from NIT Agartala.
2) His PhD project involves modeling attributes of Silicon nanowire FET devices. His past projects include studying DC and microwave characteristics of InAlN/GaN HEMTs and implementing Booth's multiplier algorithm using Verilog.
3) He has published papers in international journals and conferences and attended several workshops and seminars. His areas of interest include semiconductor device modeling and physics.
JMS CV new
Abhishek Bhattacharjee is a Ph.D student at IIT Roorkee studying microelectronics and VLSI. He received his M.Tech from NIT Silchar in microelectronics and VLSI design with a CPI of 9.35/10 and B.Tech from NIT Agartala in electronics and communication engineering with a CPI of 8.17/10. His objective is to pursue graduate studies in electronics and communication engineering leading to a career in teaching and research. His major projects include characterizing and modeling silicon nanowire FETs and studying DC and microwave characteristics of InAlN/GaN HEMTs. He has published papers in international conferences and journals
Resume
Sounak Sankar Nandi is applying to graduate programs with a Bachelor's degree in Electrical and Electronics Engineering from KIIT University in India. He has relevant coursework in areas such as electronics, programming, control systems, and power electronics. His skills include thin film fabrication and characterization techniques as well as programming languages and software. For experience, he has worked on thin film solar cell and gas sensor modeling projects and developed several robotics and IoT projects controlled by Android applications. He is an active member of his university's robotics, dramatics, and model UN societies and has received awards for his projects and extracurricular involvement.
Shreyan cv4apr2020 (1)
1) Shreyan Datta is a pre-final year undergraduate student studying Electronics and Communication Engineering at National Institute of Technology Durgapur.
2) He has received internship offers at CERN and UMR 5218 Laboratory in France which were cancelled due to the COVID-19 pandemic.
3) His past experience includes a summer research internship at Indian Institute of Science Bangalore where he studied optical communication technologies and designed an optical full adder.
Resume (Krati Mittal)
Krati Mittal is seeking a position as an engineer where she can continue learning and advancing her skills. She has a Master's degree in Electronics and Communication Engineering and experience working on projects related to cognitive radio networks, channel estimation, signal detection in MIMO systems, and energy-efficient base station scheduling. Her technical skills include MATLAB, C, Java, and SQL.
ravi resume latest 123
Ravi Pandit is seeking career-enriching assignments in technology roles that leverage his strong academic background. He has a PG Diploma in Embedded Systems Design from CDAC Bangalore and an MTech in Electronics and Instrumentation. He has over 5 years of experience as an Assistant Professor and lecturer teaching electronics. His areas of expertise include VHDL, C programming, and CAD tools like Cadence Virtuoso.
MOHAMMED OVAIZ_Resume_Faculty_Chennai
This document contains the resume of A. Mohammed Ovaiz. It summarizes his educational qualifications, professional experience, skills, publications, and additional qualifications. Some key details include:
- He has a M.E. in Power Electronics and Drives with 6 years of teaching experience and 3 years of experience in power sector operations and maintenance.
- He is currently working as an Assistant Professor and has taught subjects related to electrical engineering, power systems, and drives.
- He has published 8 papers in international journals and presented in 3 conferences on topics related to power systems and control systems.
- He is proficient in software like MATLAB, LabVIEW and has experience in programming languages like C/C++.
Similar to Resume (20)
Recently uploaded
哪里购买伯明翰大学毕业证（uob毕业证）学位证书原版一模一样
原版一模一样【微信：741003700 】【伯明翰大学毕业证（uob毕业证）学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Webinar - How to Craft a Winning Compensation Strategy
Join Payscale’s HR team as they discuss how to rethink and build a better compensation strategy that works for your organization.
原版定制(ucdavis毕业证书)加州大学戴维斯分校毕业证学位证书电子版原版一模一样
原版一模一样【微信：741003700 】【(ucdavis毕业证书)加州大学戴维斯分校毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
高仿迈阿密大学毕业证（um毕业证）硕士文凭证书原版一模一样
原版一模一样【微信：741003700 】【迈阿密大学毕业证（um毕业证）硕士文凭证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
The Rules Do Apply: Navigating HR Compliance
https://www.humanresourcestoday.com/frs/26903483/the-rules-do-apply--navigating-hr-compliance
HR Compliance is like a giant game of whack-a-mole. Once you think your company is compliant with all policies and procedures documented and in place, there’s a new or amended law, regulation, or final rule that pops up landing you back at ‘start.’ There are shifts, interpretations, and balancing acts to understanding compliance changes. Keeping up is not easy and it’s very time consuming.
This is a particular pain point for small HR departments, or HR departments of 1, that lack compliance teams and in-house labor attorneys. So, what do you do?
The goal of this webinar is to make you smarter in knowing what you should be focused on and the questions you should be asking. It will also provide you with resources for making compliance more manageable.
Objectives:
• Understand the regulatory landscape, including labor laws at the local, state, and federal levels
• Best practices for developing, implementing, and maintaining effective compliance programs
• Resources and strategies for staying informed about changes to labor laws, regulations, and compliance requirements
原版制作英属哥伦比亚大学毕业证研究生文凭证书原版一模一样
原版一模一样【微信：741003700 】【英属哥伦比亚大学毕业证研究生文凭证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
加急制作美国密歇根州立大学毕业证（msu毕业证书）本科文凭原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证（msu毕业证书）本科文凭】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
1比1仿制(csun毕业证书)加州州立大学北岭分校毕业证硕士文凭原版一模一样
原版一模一样【微信：741003700 】【(csun毕业证书)加州州立大学北岭分校毕业证硕士文凭】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (8)
Webinar - How to Craft a Winning Compensation Strategy
Webinar - How to Craft a Winning Compensation Strategy
Resume
- 1. +1 (979)7211767 RUSHAB BHIMANI 4302 College Mains Street #368 rushabb@tamu.edu Bryan, Texas 77801 OBJECTIVE Seeking an internship in Analog IC design for summer 2020 EDUCATION Texas A&M University (TAMU), College Station, Texas August 2019-May 2021 Master of Science in Electrical Engineering GPA 1st Semester Student Jadavpur University, Kolkata, India August 2012-May 2016 Bachelor of Engineering in Electrical Engineering CGPA 8.31/10.0 RELEVANT VLSI Circuit Design Programmable Logic Power Electronics COURSEWORK Digital IC Design Microprocessors and Microcontrollers Digital Electronics TECHNICAL Cadence Virtuoso MATLAB C/C++ SKILLS Python Verilog Java PUBLICATIONS Multifractal detrended fluctuation analysis used to analyze EEG signals originating from different lobes of brain, published in IEEE 2nd International Conference on Recent Trends in Information Systems (ReTIS), 2015. PROJECTS Automatic Control of a Streetlight using an Op-amp IC-741 and a light-dependent resistor. (August 2013-Dec.2013)- Using a light- dependent resistor and op-amp IC-741, an automatic controller for a street-light was designed. Automatic Traffic Light Controller using the 8085 Microprocessor Training Kit. (Oct 2014-Nov 2014)- A system was designed to control the traffic lights. At first East to West and West to East transition for 20 seconds is allowed. Then an interval period of 5 seconds is taken after which North to South and South to North transition begins. After the end of those 20 seconds an interval period of 5 seconds is again taken. This cycle repeats till infinity. Condition Monitoring of an Insulator under different conditions of temperature and humidity. (Jan 2016-April 2016)-By placing a pin insulator under different conditions of temperature and humidity the leakage current is observed. By applying various mathematical tools on the data of the leakage current, condition of the insulator is assessed. WORK Reliance Industries Limited, Surat, Gujarat, India July 2016-June 2019 EXPERIENCE Electrical Maintenance Engineer, • Troubleshooting, testing and trial simulations of microprocessor-based relays and electrical equipment. M.N.Dastur and Company Private Limited, Kolkata, India June 2015 Summer Intern • Studied the basic power distribution system for industrial plants Bharatiya Nabhikiya Vidyut Nigam Limited, Tamil Nadu, India Vocational Trainee, • Performed simulation in MATLAB for the implementation of multi-level space vector pulse width modulation switching algorithm for the speed control of a squirrel cage induction motor. ACTIVITIES Art of Living May 2012 – Present • Completed Happiness program and Happiness Program Part-2, conducted by the Art of Living organization. • Volunteered for the Art of Living organization where my work included introducing new people to the Art of Living course and helping the faculty conduct the courses. WORK Eligible to work in the United States on Curriculum Practical Training (CPT) without ELIGIBILITY sponsorship.