1. Reliability Technical Center Kokomo, IN

5. 70 Environmental Chambers

6. Thermal Shock Specifications Size : 7 chambers ranging in size from .43 to 27 cubic feet Temperature Range : Cold Zone : -70 °C to +180°C ( -70 °C to ambient) Hot Zone : +60°C to 200°C Heater Capacity : Hot Zones : 11 - 21 KW Cold Zone Control : 1.8 – 2.8 KW Cold Zone Defrost : 5.5 – 9 KW

7. Humidity Specifications Size : 48” square with two shelves – 64 cubic feet Temperature Range : -18 °C to +177°C Humidity Range : 20% to 95% Ramp Rate : From 0 °C to 10 °C/minute

8. Temp Cycle Specifications Size : 20 chambers ranging in size from 12 to 27 cubic feet Temperature Range : -65 °C to +170°C Ramp Rate : From 0 °C to 10 °C/minute

9. Temp/Humidity Cycling Specifications Size : 6 chambers ranging in size from 18 to 42 cubic feet Temperature Range : -70 °C to +150°C Humidity Range : 10% to 95% Ramp Rate : From 3 °C to 10 °C/minute

10. Walk-in Temp/Humidity Specifications Size : 1053 cubic feet Temperature Range : -65°C to +85°C Humidity Range : 10% to 95% 6’ x 8’ 3” x 7’ 10”

11. Drive-in Temp/Humidity

12. Specifications Size : 2 chambers – 12 cubic feet each Temperature Range : Ambient to 71 °C Specifications Size : 2 chambers – 30 & 74.4 cubic feet Salt Fog/ Salt Spray

13. Altitude Specifications Size : 4.9 cubic feet Temperature Range : -57 °C to 165°C Altitude : 100,000 feet

14. Dust Specifications Size : 2.6 cubic feet Dust Concentration : 0.003 – 0.014 grams per cubic meter

15. Tensile Strength Specifications 0-200 pounds force & tension

16. Flammability/Solderability Specifications Size : 1 cu. ft. capacity holds samples up to 100 by 355 mm. Specifications Size : 6 lb. pot maintains solder at 0 °C to 260 °C ±5°C

17. Specifications Size : 10 chambers ranging in size from 3.6 to 18 cubic feet Temperature Range : +35 °C to +330°C Standard Ovens