This document provides biographical information about Dr. Mohd. Kamaruddin bin Abd. Hamid and lists his publications from 2014. It details that he is a senior lecturer at Universiti Teknologi Malaysia, received his PhD from the Technical University of Denmark, and has published extensively in the areas of integrated process design, control, energy efficiency, and engineering education, including 82 publications from 2014 consisting of journals, books, book chapters and conference proceedings. He is currently leading five research grants worth a total of RM2.1 million and specializes in areas like flexible heat exchanger networks and energy efficient distillation columns.

1. PUBLICATION LIST
2014
Faculty of Chemical Engineering | Universiti Teknologi Malaysia 1
ENGR. DR. MOHD. KAMARUDDIN BIN ABD. HAMID
PhD. (Chem. Eng.) (DTU), M.Eng. (Chem. Eng.) (UTM), B.Chem.Eng. (Hons.)(UTM), A.M.I.Chem.E. (UK), Grad.I.E.M., M.M.S.E.T.
Dr. Mohd. Kamaruddin bin Abd. Hamid, 38, is a senior lecturer at the
Department of Chemical Engineering, Faculty of Chemical Engineering,
Universiti Teknologi Malaysia (UTM) since 1st. July 2011. He received his PhD
from Computer-Aided Process-Product Engineering Centre (CAPEC),
Technical University of Denmark (DTU) in April 2011. He started his academic
career in UTM since 2003. Dr. Mohd. Kamaruddin is noted as an innovative,
energetic, versatile lecturer, and currently appointed as a Research and
Development (R&D) Manager for Process Systems Engineering Centre
(PROSPECT) UTM since 26th. Sept. 2011.
Dr. Mohd. Kamaruddin is currently an active researcher in 24 research grants
with a total amount of RM2.1 million, where he leads five of them. He
specializes in the area of integrated process design and control for chemical
and biochemical process applications. Dr. Mohd. Kamaruddin is currently
involved in developing a new methodology for flexible and operable heat
exchanger networks, energy integrated distillation columns, and energy efficient distillation columns
sequence. He also involved in developing a new methodology for sustainable integrated process design
and control for reactor and separator systems. He has published 82 publications in terms of journals, books,
book chapters and conference proceedings on process design and control, energy efficient distillation
column and engineering education.
Dr. Mohd. Kamaruddin has conducted several professional short courses on Process Modelling using
Aspen HYSYS (PMAH), Distillation Operation, Control and Troubleshooting (DOCT), Process Operation,
Control and Troubleshooting (POCT) and experienced teaching Process Dynamics and Control course for
more than 10 years. He is a Registered Graduate of the Board of Engineers Malaysia (BEM) since 2001,
Graduate Member of the Institution of Engineers Malaysia (IEM) since 2006, Associate Member of the
Institution of Chemical Engineers (IChemE), Member of the American Institute of Chemical Engineers
(AIChE) since 2007. Dr. Mohd. Kamaruddin is also a Member of Malaysian Society for Engineering and
Technology (MSET) since 2013 and a member of American Chemical Society (ACS) since 2014.
ENGR. DR. MOHD. KAMARUDDIN BIN ABD. HAMID
Research and Development (R&D) Manager
Process Systems Engineering Centre (PROSPECT), Faculty of Chemical Engineering
Senior Lecturer
Department of Chemical Engineering, Faculty of Chemical Engineering
Principal Researcher
Research Institute of Sustainable Environment (RISE)
Universiti Teknologi Malaysia
81310 UTM Johor Bahru, Johor, MALAYSIA.
Tel: (6) 07 553 5517
Fax (6) 07 558 8166
Email: kamaruddin@cheme.utm.my
Website: http://www.cheme.utm.my/staff/kamaruddin/
Facebook: http://www.facebook.com/DrMKAH
SCOPUS Author ID: 35519901900 ResearcherID: F-5049-2011 ORCID: 0000-0001-6272-5224

2. PUBLICATION LIST
2014
Faculty of Chemical Engineering | Universiti Teknologi Malaysia 2
PUBLICATIONS
Total Publications: 87: Journals (25), Books (2), Book Chapters (5), Proceedings (54), Others (1)
Citations: 36 (Scopus), 121 (Google scholar); h-index: 2 (Scopus), 6 (Google scholar)
Journals
25. Borhani, T. N. G., Akbari, V., Afkhamipour, M., Hamid, M. K. A., and Manan, Z. A. (2015). Comparison
of Equilibrium and Non-Equilibrium Models of a Trayed Column for Post-Combustion CO2 Capture
Using DEA-Promoted Potassium Carbonate Solution. Chemical Engineering Science, 122, 291-298.
24. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Design target selection
for heat exchanger network synthesis based on trade-off plot. Energy Procedia, 61, 2621-2624.
23. Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell
performance part II: parametric study. Energy Procedia, 61, 2617-2620.
22. Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell
performance Part I: modelling and validation. Energy Procedia, 61, 2613-2616.
21. Mustafa, M. F., Abdul Samad, N. A., Ibrahim, K. A., and Hamid, M. K. A. (2014). Methodology
development for designing energy efficient distillation column systems. Energy Procedia, 61, 2550-
2553.
20. Alias, N., Ibrahim, N., and Hamid, M. K. A. (2014). Pyrolysis of empty fruit bunch by thermogravimetric
analysis. Energy Procedia, 61, 2532-2536.
19. Alias, N., Ibrahim, N., Hamid, M. K. A., Hasbullah, H., Rasit Ali, R., Sadikin, A. N., and Asli, U. A.
(2014). Thermogravimetric Analysis of Rice Husk and Coconut Pulp for Potential Biofuel Production
by Flash Pyrolysis. The Malaysian Journal of Analytical Sciences, 18(3), 705-710.
18. Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for
Designing Energy Efficient Distillation Column Systems. Applied Mechanics and Materials, 625, 490-
493.
17. Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design
and Control for a Continuous-Stirred Tank Reactor System. Applied Mechanics and Materials, 625,
466-469.
16. Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and
Control for a Distillation Column System. Applied Mechanics and Materials, 625, 470-473.
15. Akbari, V., Borhani, T. N. G., Godini, H. R., and Hamid, M. K. A. (2014). Model-based analysis of
impact of distributor on the performance of industrial polydisperse gas phase fluidized bed
polymerization reactor. Powder Technology, 267, 398-411.
14. Borhani, T. N. G., Hamid, M. K. A., and Manan, Z. A. (in-Press, Accepted Manuscript). Rate-Based
Simulation and Comparison of Various Promoters for CO2 Capture in Industrial DEA-Promoted
Potassium Carbonate Absorption Unit. Journal of Industrial and Engineering Chemistry.
13. Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2014). Design and Fabrication of Bench-
Scale Flash Pyrolysis Reactor for Bio-Fuel Production. Chemical Engineering Transactions, 39, 943-
948.
12. Hasbullah, H., Mohamed, F., Ali, R. R., Ibrahim, N., Hamid, M. K. A., Salleh, W. N. W, and Yusof, N.
(2014). Morphological Investigation of Alumina Asymmetric Membrane by Manipulating the Sintering
Temperature Profile. Applied Mechanics and Materials, 606, 205-209.
11. Akbari, V., and Hamid, M. K. A. (2014). Prediction of Minimum Fluidization Velocity Using a CFD-PBM
Coupled Model in an Industrial Gas Phase Polymerization Reactor. Journal of Engineering Science,
10, 95-105.
10. Hamid, M. K. A. (2014). Development of a Sustainable Integrated Process Design and Control for
Chemical Processes. Journal of Applied Sciences, 14(12), 1277-1282.
9. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Flexible and Operable
Heat Exchanger Networks, Chemical Engineering Transactions, 32, 1297 - 1303.

3. PUBLICATION LIST
2014
Faculty of Chemical Engineering | Universiti Teknologi Malaysia 3
8. Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., Ali, R. R., and
Hasbullah, H. (2013). Experimental Investigation of Flash Pyrolysis Oil Droplet Combustion. Chemical
Engineering Transactions, 32, 667 – 672.
7. Hamid, M. K. A., Sin, G, and Gani, R. (2011). An overview of ICAS-IPDC – A software for integrated
process design and controller design of chemical processes. PERINTIS e-Journal, 1, 1 – 9.
6. Alvarado-Morales, M., Hamid, M. K. A., Sin, G., Gernaey, K. V., Woodley, J. M., and Gani, R. (2010).
A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production
Process. Computers and Chemical Engineering, 34 (12), 2043 – 2061.
5. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Integration of Process Design and Controller Design
for Chemical Processes using Model-Based Methodology. Computers and Chemical Engineering, 34
(5), 683 – 699.
4. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve
Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems.
IFAC Proceedings Volume, 9 (1), 463-468.
3. Alvarado-Morales, M., Hamid, M. K. A., Sin, G., Gernaey, K. V., Woodley, J. M., and Gani, R. (2009).
A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production
Process. In: R. M. de Brito Alves, C. A., Oller de Nascimento and E. C. Biscia Jr. (Eds.). Computer
Aided Chemical Engineering, 27 (Part A), Elsevier B. V., Amsterdam. 237 – 242.
2. Hamid, M. K. A., Sin, G., and Gani, R. (2009). A New Model-Based Methodology for Simultaneous
Design and Control of Reaction-Separation Systems with Recycle. In: J. Jezowski and J. Thullie (Eds.).
Computer Aided Chemical Engineering, 26, Elsevier B. V., Amsterdam. 839 – 845.
1. Abdullah, M. S., Hasbullah, H., Ibrahim, N., and Hamid, M. K. A. (2007). Simulation and Optimization
of Butane Autothermal Reformer for Fuel Cell Applications. Journal of Chemical and Natural
Resources Engineering, Vol. 2, 1 – 13.
Theses/Books
2. Hamid, M. K. A. (2011). Model-Based Integrated Process Design and Controller Design of Chemical
Processes. PhD. Thesis, Technical University of Denmark (DTU). ISBN: 978-87-92481-39-9.
1. Hamid, M. K. A. (2003). Multiple Faults Detection using Artifical Neural Networks. Master Thesis,
Universiti Teknologi Malaysia (UTM).
Book Chapters
5. Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., and Ali, R. R. (2013).
Experimental Investigation of Combustion of Flash Pyrolysis Oil. In: Pogaku, R., Bono, A., Chu, C.
(Eds.), Development in Sustainable Chemical and Bioprocess Technology, Springer, 181-188. ISBN:
978-1-4614-6207-1.
4. Hamid, M. K. A. (2012). A Conceptual Example of the Integrated Process-Controller Design. In
Hashim, H., Hassim, M. H., Wan Alwi, S. R. A. (Eds.), Efficient Sustainable Process, Penerbit UTM
Press. ISBN: 978-983-52-0897-3. 38 – 67.
3. Hamid, M. K. A., Sin, G., and Gani, R. (2009). Determination of Optimal Design and Control Decisions
for Reactor-Separator Systems with Recycle. In: M. M. El-Halwagi and A. A. Linninger (Eds.). Design
for Energy and the Environment. Breckenridge, Colorado: CRC Press. 593 – 602.
2. Hamid, M. K. A., Sin, G., and Gani, R. (2008). Integrated Process Design and Control of a Single
Reactor System. In: K. Dam-Johansen and M. Bojer. Graduate Schools Yearbook 2008, DTU
Chemical Engineering, 55 – 58.
1. Hamid, M. K. A., and Gani, R. (2007). Integration of Modelling, Design and Control for Efficient
Operation of Chemical Processes. In: K. Dam-Johansen and M. Bojer. Graduate Schools Yearbook
2007, DTU Chemical Engineering, 3 – 6.
Conference Proceedings

4. PUBLICATION LIST
2014
Faculty of Chemical Engineering | Universiti Teknologi Malaysia 4
54. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Optimal
Synthesis of Energy Efficient Distillation Columns Sequence of Natural Gas Liquids. The 7th. Regional
Conference on Chemical Engineering (RCChE 2014), Jogyakarta. December 2-3.
53. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Optimal
Synthesis of Energy Efficient Distillation Columns Sequence Using Driving Force Method. The 2nd.
International Seminar on Fundamental and Application of Chemical Engineering (ISFAChE 2014),
Bali. November 12-13.
52. Mustafa, M. F., Gotowo, A., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A.
(2014). Minimum Energy Distillation Column Sequence for NGLs Fractionation Process. The 2nd.
International Seminar on Fundamental and Application of Chemical Engineering (ISFAChE 2014),
Bali. November 12-13.
51. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, K. A., and Hamid, M. K. A. (2014). Design of Energy
Efficient Distillation Columns for Separation of Oxygenates Process. 27th Symposium of Malaysian
Chemical Engineers (SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical
Engineering (RSCE 2014), Subang Jaya. October 29-30.
50. Zakaria, S. A., Zakaria, M. J., M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Integrated Tool for
Assessing Sustainability Index of Reactor Systems. 27th Symposium of Malaysian Chemical Engineers
(SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical Engineering (RSCE 2014),
Subang Jaya. October 29-30.
49. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Integrated Tool for Assessing
Sustainability Index of Distillation Column Systems. 27th Symposium of Malaysian Chemical Engineers
(SOMChE 2014) in conjunction with 21st Regional Symposium on Chemical Engineering (RSCE 2014),
Subang Jaya. October 29-30.
48. Zakaria, S. A., Zakaria, M. J., Othman, M. R., and Hamid, M. K. A. (2014). 3D Sustainability Analysis
of Integrated Process Design and Control for Production of Cyclohexanone. The 2nd International
Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur.
August 20 - 22.
47. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Energy
Efficient Distillation Columns Design for Rettrofit NGLs Fractionation Process. The 2nd International
Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur.
August 20 - 22.
46. Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). Thermogravimetric Analysis of Rice Husk and
Coconut Pulp for Potential Biofuel Production by Flash Pyrolysis. The 2nd International Conference on
Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August 20 - 22.
45. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Three-Dimensional
Sustainability Analysis for Integrated Process Design and Control for Separation of Benzene and
Toluene Mixture. The 2nd International Conference on Global Sustainability and Chemical Engineering
(ICGSCE2014), Kuala Lumpur. August 20 - 22.
44. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Controllability Analysis
on Delta Temperature Minimum to Obtain Operable and Flexible Heat Exchanger Networks. The 5th
International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor
Bahru. August 19 - 21.
43. Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). The Application of Integrated Sustainability
Tool for Separation of Benzene and Toluene Mixture. The 5th International Graduate Conference on
Engineering, Science and Humanities (IGCESH2014), Johor Bahru. August 19 - 21.
42. Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). The Application of Integrated Sustainability
Tool for Production of Cyclohexanone. The 5th International Graduate Conference on Engineering,
Science and Humanities (IGCESH2014), Johor Bahru. August 19 - 21.
41. Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, K. A., Ibrahim, N. and Hamid, M. K. A. (2014). Design
of Energy Efficient Distillation Columns Systems. International Symposium on Green Manufacturing
and Applications (ISGMA 2014), Busan, Korea. 24 – 28 June, pp. 66-69.
40. Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for
Flexible and Operable Energy Integrated Distillation Column Systems. The 3rd International

5. PUBLICATION LIST
2014
Faculty of Chemical Engineering | Universiti Teknologi Malaysia 5
Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June 3
– 5.
39. Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design
and Control for a Continuous-Stirred Tank Reactor System. The 3rd International Conference on
Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June 3 – 5.
38. Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and
Control for a Distillation Column System. The 3rd International Conference on Process Engineering
and Advanced Materials (ICPEAM2014), Kuala Lumpur. June 3 – 5.
37. Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for
Designing Energy Efficient Distillation Column Systems. The 6th. International Conference on Applied
Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.
36. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Design Target Selection
for Heat Exchanger Network Synthesis Based on Trade-Off Plot. The 6th. International Conference on
Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.
35. Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). An Investigation of Oil Palm Wastes Pyrolysis by
Thermogravimetric Analyzer for Potential Biofuel Production. The 6th. International Conference on
Applied Energy (ICAE2014), Taipei, Taiwan. May 30 – June 2.
34. Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). Pyrolysis of Oil Palm Empty Fruit Bunch by
Thermogravimetric Analysis. The 6th. International Conference on Applied Energy (ICAE2014), Taipei,
Taiwan. May 30 – June 2.
33. Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell
performance part II: Parametric study. The 6th. International Conference on Applied Energy
(ICAE2014), Taipei, Taiwan. May 30 – June 2.
32. Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell
performance part I: Modelling and validation. The 6th. International Conference on Applied Energy
(ICAE2014), Taipei, Taiwan. May 30 – June 2.
31. Akbari, V., and Hamid, M. K. A. (2013). Prediction of Minimum Fluidization Velocity Using a CFD-PBM
Coupled Model in an Industrial Gas Phase Polymerization Reactor. National Colloquium on Process
Control (NCPC 2013), Universiti Sains Malaysia, Pulau Pinang. 1 Oct.
30. Borhani, T. N. G., Akbari, V., Hamid, M. K. A., Manan, Z. A. (2013). Rate-Based Simulation of DEA
Promoted Potassium Carbonate Process. 6th International Conference on Process Systems
Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 338 – 343.
29. Akbari, V., Borhani, T. N. G., Esfeh, H. K., and Hamid, M. K. A. (2013). Computational Fluid Dynamic
and Population Balance Modeling of Industrial Fluidized Bed Polymerization Reactor. 6th International
Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June,
745 – 751.
28. Lawal, S., Halimoon, H., Zainal Alam, M. N. H., and Hamid, M. K. A. (2013). Optimization of
Microbioreactor Operating Volume by Using Attainable Region Approach. 6th International Conference
on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June, 720 - 725.
27. Mohd-Yusof, K., Hamid, M. K. A., Hassim, M. H., Harun, S., and Syed Hassan, S. A. H. (2013).
Problem Based Learning for Process Control and Dynamics, Part 1: Effective Planning for a Typical
Course. 6th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala
Lumpur, Malaysia. 25-27 June, 687 - 694.
26. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Integrated Process
Design and Control of Heat Exchanger Networks for Biomethanol Production Plant. 6th International
Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia. 25-27 June,
421 - 426.
25. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Flexible and Operable
Heat Exchanger Networks, 11th International Conference on Chemical and Process Engineering
(ICheaP-11), Milan, Italy. June 2 – 5.

6. PUBLICATION LIST
2014
Faculty of Chemical Engineering | Universiti Teknologi Malaysia 6
24. Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., Ali, R. R., and
Hasbullah, H. (2013). Experimental Investigation of Flash Pyrolysis Oil Droplet Combustion. 11th
International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June 2 – 5.
23. Hamid, M. K. A. (2012). Development of a Sustainable Integrated Process Design and Control for
Chemical Processes. In: Bono, A., and Sipaut, C. S. (Eds.). The 26th Symposium of Malaysian
Chemical Engineers (SOMChE 2012) with the 4th International Conference on Chemical and
Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia. 629 – 634.
22. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2012). Development of a New
Model-Based Integrated Process Design and Control for Heat Exchanger Networks. In: Bono, A., and
Sipaut, C. S. (Eds.). The 26th Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the
4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah,
Malaysia. 883 – 891.
21. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve
Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems.
3rd. Dansk KemiingeniorKonference, Kgs. Lyngby, Denmark. 16 – 17 June.
20. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve
Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems.
CAPE Forum 2010, Aachen, Germany. 11 – 12 March.
19. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve
Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems.
DYCOPS 2010 (9th. International Symposium on Dynamics and Control of Process Systems), Lueven,
Belgium. July 5 -7, 449 – 454.
18. Alvarado-Morales, M., Hamid, M. K. A., Sin, G., Gernaey, K. V., Woodley, J. M., and Gani, R. (2009).
A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production
Process. 10th. International Symposium on Process Systems Engineering, Salvador de Bahia, Brazil.
18 – 2- August.
17. Hamid, M. K. A., Sin, G., and Gani, R. (2009). A New Model-Based Methodology for Simultaneous
Design and Control of Reaction-Separation Systems with Recycle. 19th. European Symposium on
Computer Aided Process Engineering (ESCAPE19), Krakow, Poland. 14 – 17 June.
16. Hamid, M. K. A., Sin, G., and Gani, R. (2009). Determination of Optimal Design and Control Decisions
for Reactor-Separator Systems with Recycle. FOCAPD 2009 (7th. International Conference on the
Foundations of Computer-Aided Process Design), Breckenridge, CO. 7 – 12 June.
15. Hamid, M. K. A., and Gani, R. (2008). A Model-Based Methodology for Simultaneous Process Design
and Control for Chemical Processes. FOCAPO 2008 (Foundations of Computer-Aided Process
Operations), Cambridge, Massachusetts. June 29 – July 2. 205 – 208.
14. Ahmad, A., Abdul Samad, N. A. F., and Hamid, M. K. A. (2007). Product Optimization of a Fed-Batch
Fermentation Processes. European Congress of Chemical Engineering (ECCE-6), Copenhagen,
Denmark. Sept. 2007, 16 – 20.
13. Hamid, M. K. A., Ibrahim, N., Ibrahim, K. A. and Ahmad, A. (2006). Simulation of hydrogen production
for mobile fuel cell applications via autothermal reforming of methane. International Conference on
Natural Resources Engineering and Technology (INRET 2006), Putrajaya, Malaysia. 24-25 July 2006.
12. Mohd. Yusof, K., Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., Syed Hassan, S. A. H., and
Tasir, Z. (2005). Outcomes of Problem-Based Learning Implementation from Students’ Perspective.
Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, 12-13 December 2005.
11. Hamid, M. K. A., Abu Hassan, M. A., Mohd. Yusof, K. and Syed Hassan, S. A. H. (2005). Crafting
Effective Engineering Problems for Problem-Based Learning: Universiti Teknologi Malaysia
Experiences. Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, 12-13
December 2005.
10. Mohd. Rohani, J., Abu Hassan, M. A., Syed Hassan, S. A. H., Hamid, M. K. A. and Mohd.Yusof, K.
(2005). Assessing the Effectiveness of Problem Based Learning (PBL) using Quality Function
Deployment (QFD): Students Perspective. Regional Conference on Engineering Education (RCEE
2005), Johor Bahru, 12-13 December 2005.

7. PUBLICATION LIST
2014
Faculty of Chemical Engineering | Universiti Teknologi Malaysia 7
9. Syed Hassan, S. A. H., Mohd. Yusof, K., Hamid, M. K. A. and Hassim, M. H. (2005). Problem-based
Learning in Facilities Planning: A Pilot Implementation, 4th Asia-Pacific Forum on Engineering and
Technology Education, Bangkok, Thailand, 26-29 September 2005.
8. Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., and Mohd. Yusof, K. (2004). Implementation of
Problem-Based Learning in a Typical Engineering Classroom. Conference on Engineering Education,
Kuala Lumpur, 14-15 Dec. 2004.
7. Abu Hassan, M. A., Mohd. Yusof, K., Hamid, M. K. A., Hassim, M. H., Abd. Aziz, A., and Syed Hassan,
S. A. H. (2004). A Review and Survey of Problem-Based Learning Application in Engineering
Education. Conference on Engineering Education, Kuala Lumpur, 14-15 Dec. 2004.
6. Mohd. Yusof, K., Abd. Aziz, A., Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., Syed Hassan, S.
A. H., and Azila, N. M. A. (2004). Problem-Based Learning in Engineering Education: A Viable
Alternative for Shaping Graduates for the 21st Century?. Conference on Engineering Education, Kuala
Lumpur, 14-15 Dec. 2004.
5. Hassim, M. H., Hamid, M. K. A., Abu Hassan, M. A., Mohd. Yusof, K., Syed Hassan, S. A. H., and
Esa, M. (2004). Enhancing Learning Through Cooperative Learning: UTM Experience. Conference on
Engineering Education, Kuala Lumpur, 14-15 Dec. 2004.
4. Ahmad, A. and Hamid, M. K. A. (2003). Pipeline Leak Detection System in a Palm Oil Fractionation
Plant Using Artificial Neural Network. International Conference on Chemical and Bioprocess
Engineering (ICCBPE), Sabah, Malaysia. August 2003.
3. Ahmad, A. and Hamid, M. K. A. (2002). Detection of Multiple Sensor Faults in a Palm Oil Fractionation
Plant Using Artificial Neural Network. Regional Symposium on Chemical Engineering (RSCE 2002) in
conjunction with 16th Symposium of Malaysian Chemical Engineers (SOMChE 2002), Petaling Jaya,
Malaysia.
2. Ahmad, A. and Hamid, M. K. A. (2002). Detection of Sensor Failure In a Palm Oil Fractionation Plant
Using Artificial Neural Network. International Conference On Artificial Intelligence In Engineering and
Technology ICAIET, Sabah, Malaysia.
1. Ahmad, A. and Hamid, M. K. A. (2001). Neural Networks for Process Monitoring and Fault Detection:
Application to Tennessee Eastman Plant. Malaysian Science & Technology Congress, Melaka,
Malaysia.
Other Publications
1. Hamid, M. K. A. (2013). Aspen HYSYS: An Introduction to Chemical Engineering Simulation. LAP
Lambert Academic Publishing. ISBN: 978-3-659-35879-1.