This Revit model was created as practice following a handbook and includes a school building with a swimming pool, playground, and office building. The modeler built the project in an organized sequence starting with the grid, elevations, columns, walls, floors, ceilings, roof, and stairs. After completing structural elements like the curtain wall facade, interior design, furniture, and landscaping were added. Finally, sunlight analysis, green design, and quantity reports were generated from the rendered model.

1. Practice Project
This is a Revit model that I made for practicing the software following a handbook. It
is for a school building which contains a swimming pool, a playground and an office
building. Starting from laying out the grid and elevations, I built this model in an
organized manner, namely in the sequence of columns, walls, floors, ceilings, roof and
stairs. The building facade consists of a curtain system. After finishing these structural
works, I started working on architectural work including interior design, furniture layout
and landscape setting. Finally, after rendering the model, I created numerous reports
regarding sunlight analysis, green design and quantity take-off.
Figure 1. 3D View of the Project

2. Figure 2. Floor Plans-First Floor
Figure 3. Floor Plans-Rooms of First Floor

3. Figure 4. Grade Region
Figure 5. Section

4. Figure 6. 3D Views-Meeting Room
Figure 6. 3D Views-Outside

5. Figure 6. 3D Views-Stairs
Figure 7. Sunlight Analysis