Power control for hybrid motorcycle
•
1 like•668 views
An automatic centrifugal clutch is interposed in a power transmission system between an engine and a driving wheel. A motor, which is capable of generating electricity, is supplied with electricity from a battery to generate auxiliary power. The motor is connected to a crankshaft of the engine. An acceleration data acquisition component acquires the accelerator operation amount and the accelerator operation speed. A delay time setting component sets a delay time according to the acceleration data. A motor controller supplies the motor 13 with a magnitude of electricity in accordance with the acceleration operation amount after the delay time has elapsed from the moment when an accelerator grip was moved from an idle position
Report
Share
Report
Share
Download to read offline
Recommended
Bajaj 2
This document summarizes the placement process at Bajaj for 2008 in Delhi. It consisted of 3 rounds:
1) A 1-hour written test with 53 questions split between 25 technical and 28 aptitude questions. Marks were deducted for incorrect answers.
2) A group discussion round with 2 topics discussed in small groups for 30 minutes total, with 10 minutes for preparation.
3) A personal interview. Performance in the group discussion alone was not used for shortlisting.
The written test covered both technical topics related to machinery as well as aptitude questions involving data interpretation, logical reasoning, and other skills. A variety of formats were used, including multiple choice, matching, and short answers.
Bhel 1
The document provides information about a written test conducted by BHEL for engineering trainees. It mentions that there were 240 questions total, with 120 technical questions in mechanical engineering covering topics like thermodynamics, mechanics, production tech, etc. The remaining 120 questions tested general aptitude in areas like quantitative aptitude, reasoning, English. It then provides 30 sample technical questions from the test related to concepts in mechanics, materials, machines. It concludes by stating the general aptitude sections were easy but time was a factor due to the large number of questions.
Bhel 2
This document provides 63 multiple choice or short answer questions related to mechanical engineering topics like thermodynamics, refrigeration, fluid mechanics, materials, manufacturing, and project management. The questions cover concepts such as specific heats, gas laws, psychrometrics, buoyancy, pumps, turbines, stress and strain, metals and alloys, machining processes, cost analysis, scheduling techniques, and more.
Certificate MOOC IFP_Prasanth Kumar
Kumar Prasanth completed all courses and online assessments offered by IFP School on Sustainable Mobility: Technical and Environmental Challenges for the Automotive Sector from their 2014 4-week session. The certificate, signed by the Dean of IFP School Philippe Pinchon on December 23, 2014, confirms Kumar Prasanth's participation and achievement in the program.
Computer aided manufacturing robotic systems
The document discusses industrial robots, including their basic components, types of joints, movement and precision, power sources, sensors, end effectors, and applications. An industrial robot generally consists of rigid links connected by joints to form an arm with an end effector or hand. It is controlled by a computer and can be programmed to perform automated tasks through variable motions. The document covers various robotic systems and their use in manufacturing.
Tushar ppt
Industrial robots are programmable manipulators designed to move materials and tools. They consist of an arm, end effectors, drive mechanism, controller, and optional sensors. Robots have various types of joints that allow rotational, radial, and vertical movement. Common configurations include Cartesian, cylindrical, polar, and joint-arm designs. Robots are also classified based on their control system as either point-to-point or continuous-path robots.
Recommended
Bajaj 2
This document summarizes the placement process at Bajaj for 2008 in Delhi. It consisted of 3 rounds:
1) A 1-hour written test with 53 questions split between 25 technical and 28 aptitude questions. Marks were deducted for incorrect answers.
2) A group discussion round with 2 topics discussed in small groups for 30 minutes total, with 10 minutes for preparation.
3) A personal interview. Performance in the group discussion alone was not used for shortlisting.
The written test covered both technical topics related to machinery as well as aptitude questions involving data interpretation, logical reasoning, and other skills. A variety of formats were used, including multiple choice, matching, and short answers.
Bhel 1
The document provides information about a written test conducted by BHEL for engineering trainees. It mentions that there were 240 questions total, with 120 technical questions in mechanical engineering covering topics like thermodynamics, mechanics, production tech, etc. The remaining 120 questions tested general aptitude in areas like quantitative aptitude, reasoning, English. It then provides 30 sample technical questions from the test related to concepts in mechanics, materials, machines. It concludes by stating the general aptitude sections were easy but time was a factor due to the large number of questions.
Bhel 2
This document provides 63 multiple choice or short answer questions related to mechanical engineering topics like thermodynamics, refrigeration, fluid mechanics, materials, manufacturing, and project management. The questions cover concepts such as specific heats, gas laws, psychrometrics, buoyancy, pumps, turbines, stress and strain, metals and alloys, machining processes, cost analysis, scheduling techniques, and more.
Certificate MOOC IFP_Prasanth Kumar
Kumar Prasanth completed all courses and online assessments offered by IFP School on Sustainable Mobility: Technical and Environmental Challenges for the Automotive Sector from their 2014 4-week session. The certificate, signed by the Dean of IFP School Philippe Pinchon on December 23, 2014, confirms Kumar Prasanth's participation and achievement in the program.
Computer aided manufacturing robotic systems
The document discusses industrial robots, including their basic components, types of joints, movement and precision, power sources, sensors, end effectors, and applications. An industrial robot generally consists of rigid links connected by joints to form an arm with an end effector or hand. It is controlled by a computer and can be programmed to perform automated tasks through variable motions. The document covers various robotic systems and their use in manufacturing.
Tushar ppt
Industrial robots are programmable manipulators designed to move materials and tools. They consist of an arm, end effectors, drive mechanism, controller, and optional sensors. Robots have various types of joints that allow rotational, radial, and vertical movement. Common configurations include Cartesian, cylindrical, polar, and joint-arm designs. Robots are also classified based on their control system as either point-to-point or continuous-path robots.
Advanced Machining Processes - Unconventional Machining Processes
This document discusses advanced machining processes, which utilize chemical, electrical, or high-energy beams to remove material as they are needed for difficult-to-machine materials or complex part geometries. It introduces various advanced processes like chemical machining, electrochemical machining, electrical discharge machining, laser beam machining, electron beam machining, and others. These processes allow machining of very hard materials, brittle materials, or parts that are too small, complex, or fragile for traditional machining techniques.
Advanced Manufacturing Choices
Mechanical Removing Techniques
-Ultrasonic Machining (USM)
-Sputtering and Focused Ion Beam Milling (FIB)
5 S
Explain the 5S process
Go through each “S”
Show tools that can be used for each “S”
Talk about experiences putting the 5S system in place
Powder Metal Applications
This document discusses potential applications for powder metal parts in the automotive industry. It outlines specific component examples for powder metal use in engines, transmissions, chassis, exhaust systems, pumps and hydraulics. Some key applications mentioned include camshaft lobes, connecting rods, synchronizer rings, planetary carriers, shock absorber parts, and oil pump gears. The document also provides pictures to illustrate powder metal parts currently used in engines, transmissions, body applications, and pumps. It briefly discusses powder forging and metal injection molding as two powder metal production processes.
HYBRID MOTORCYCLE
The document discusses the benefits of meditation for reducing stress and anxiety. Regular meditation practice can help calm the mind and body by lowering heart rate and blood pressure. Studies have shown that meditating for just 10-20 minutes per day can have significant positive impacts on both mental and physical health over time.
NOTIFICATION ON SECOND RESCHEDULING OF EXAM DATES FOR AFFILIATED COLLEGES MAY...
NOTIFICATION ON SECOND RESCHEDULING OF EXAM DATES FOR AFFILIATED COLLEGES MAY...Prasanth Kumar RAGUPATHY
NOTIFICATION ON SECOND RESCHEDULING OF EXAM DATES FOR
AFFILIATED COLLEGES MAY/JUNE 2012 EXAMINATIONS
As per the original Time Table given, Anna University Theory Examinations for
Affiliated Colleges, Constituent Colleges and University Departments of Anna
Universities of Technology (AUTs) (May/June 2012) were to commence on 3.5.2012.
But due to administrative reasons, the examinations on 3rd, 4th, 5th May 2012 were
rescheduled on 28th, 29th and 30th May 2012 and the examinations on 28th, 29th and 30th
May 2012 were rescheduled on 7th, 8th, and 9th June 2012.
Now all the examinations starting from 7.5.2012 are rescheduled again
shifting by exactly 7 days.GRE High Frequency Words
This document contains a list of vocabulary words along with their definitions. It begins with words like "abase" meaning "make someone lower in rank or position" and "abdicate" meaning "formally give up an office." It continues providing definitions for roughly 60 additional words, with parts of speech and examples for many. The list covers a wide range of topics and includes words such as "aesthetic," "altruistic," "amalgamate," and "anathema."
Design of transmission systems qb
This document contains question bank for the 6th semester Mechanical Engineering course on Design of Transmission Systems at Anna University. It includes questions from 4 units - Design of Belt, Rope and Chain Drives; Design of Gear Drives; Design of Gear Boxes; and Design of Clutches and Brakes. The questions are both short answer type and long answer/design problems. Some examples of long answer questions include designing belt drives, gear drives, gear boxes, wire rope drives and clutch/brake systems.
Me2351 gas dynamics and jet propulsion-qb
The document contains questions related to gas dynamics and jet propulsion. It covers topics such as compressible and incompressible fluids, stagnation pressure and temperature, Mach number, zones of action and silence, open and closed systems, intensive and extensive properties, shock waves, normal and oblique shocks, jet and rocket propulsion, rocket engine classifications, specific impulse, specific consumption, thrust coefficient, propulsive efficiency, Fanno and Rayleigh flows, and one-dimensional isentropic flow through nozzles, ducts, and diffusers. The questions range from definitions and differentiations to derivations and multi-step calculations involving isentropic flow equations.
Finite element analysis qb
This document contains 10 questions each from 10 units on the topic of finite element analysis. The questions cover various fundamental concepts in FEA including finite element modeling techniques like shape functions, interpolation functions, stiffness matrices, boundary conditions etc. They also involve solving sample problems using techniques like Gauss elimination, Rayleigh-Ritz method, Galerkin's method and computing stresses, displacements, temperatures etc.
Me2354 automobile engineering-qb
This document contains a question bank for an Automobile Engineering course, with questions ranging from 2-16 marks. It includes questions on topics such as vehicle systems, engine components and systems, fuels, batteries, ignition systems, transmission, steering, suspension, brakes and alternative fuel technologies. The questions cover definitions, explanations, comparisons, and involve diagrams and sketches in some longer answer questions.
Mg2351. principles of management 2mark
This document provides definitions and short explanations of management concepts. It covers topics such as the five functions of management (planning, organizing, staffing, leading, controlling), managerial skills, productivity, goals, policies, procedures, budgets, management by objectives, decision making, risk analysis, and social responsibility. It also discusses organizational structure, types of organizational charts, departmentation, power, authority, and leadership styles. The document is a study guide that defines and explains various foundational management principles in brief form.
MG2351-PRINCIPLES OF MANAGEMENT
The document discusses various concepts related to the principles of management. It defines management as a continuous process of designing and maintaining an environment for people to work together to efficiently achieve goals. It describes management as both an art and a science. The key functions of management are identified as planning, organizing, staffing, directing and controlling. Scientific management and contributions of theorists like Taylor, Fayol and others are summarized.
Industrial robotics
This document provides an overview of industrial robotics, including robot anatomy, control systems, end effectors, applications, and programming. It describes the typical components of a robot like links, joints, drives, and sensors. Common robot configurations and their joint notation are shown. The document also discusses robot programming methods including leadthrough and textual languages, as well as simulation for offline programming.
Anna University UG Project Report Format
The document provides guidelines for preparing project reports for B.E., B.Tech., and B.Arch. degrees at Anna University in Chennai, India. It specifies the required sections and their order, including a cover page, bonafide certificate, abstract, table of contents, lists of tables and figures, chapters, appendices, and references. Formatting requirements are also outlined, such as the report dimensions, binding, fonts, spacing, and page numbering. Sample templates are provided for the cover page, bonafide certificate, and table of contents.
Bhel 3
The document summarizes the pattern of a placement test taken at BHEL. It consisted of 240 multiple choice questions with 120 questions each on technical and aptitude/general English sections. The technical questions covered basics of mechanical engineering, directly from textbooks on power systems and objective question banks. The aptitude section included questions on error identification, antonyms, synonyms and passages. Thirty questions involved relating statements using relations such as equal, greater than, less than. The test was timed for 150 minutes to complete all 240 questions.
Bajaj 1
The document summarizes the process and rounds of a placement paper for Bajaj. It consisted of 3 rounds - 1) A 1 hour written test with 53 questions split between technical and aptitude sections. 2) A group discussion round with topics related to food production and marketing. 3) A personal interview. The technical section included questions on engineering concepts like materials, machining, cycles etc. The aptitude section included questions on data interpretation from tables and charts, logical reasoning and statements.
The ultimate resume guide for freshers
This article is intended to serve as a comprehensive guide to creating a resume for a fresh graduate. This post clearly articulates all the sections that are needed to be included in a standard resume. Each section is explained with examples. You can also find sample resumes at the end of this article. Please note that this article doesn’t cover anything related to formatting of a resume. Formatting of resume using Word shall be covered as a separate blog post in near future. Also resume formats vary from country to country. This format in particularly is the de facto standard followed by freshers in India. This article was written after extensively researching many resumes on the internet.
Verbal reasoning
Teacher ::
a) Student: Class
b) Nurse: Doctor
c) Employee: Manager
d) Apprentice: Master
e) Secretary: President
The relationship between assistant and teacher is that of helper/aide to the person in charge. The parallel relationship here is apprentice to master, as an apprentice helps and learns from their master, similar to an assistant helping and learning from a teacher.
The answer is d) Apprentice: Master.
Call Girls Pune 7023059433 Vip Escorts Service in Pune
Call Girls Pune 7023059433 Vip Escorts Service in Pune
More Related Content
More from Prasanth Kumar RAGUPATHY
Advanced Machining Processes - Unconventional Machining Processes
This document discusses advanced machining processes, which utilize chemical, electrical, or high-energy beams to remove material as they are needed for difficult-to-machine materials or complex part geometries. It introduces various advanced processes like chemical machining, electrochemical machining, electrical discharge machining, laser beam machining, electron beam machining, and others. These processes allow machining of very hard materials, brittle materials, or parts that are too small, complex, or fragile for traditional machining techniques.
Advanced Manufacturing Choices
Mechanical Removing Techniques
-Ultrasonic Machining (USM)
-Sputtering and Focused Ion Beam Milling (FIB)
5 S
Explain the 5S process
Go through each “S”
Show tools that can be used for each “S”
Talk about experiences putting the 5S system in place
Powder Metal Applications
This document discusses potential applications for powder metal parts in the automotive industry. It outlines specific component examples for powder metal use in engines, transmissions, chassis, exhaust systems, pumps and hydraulics. Some key applications mentioned include camshaft lobes, connecting rods, synchronizer rings, planetary carriers, shock absorber parts, and oil pump gears. The document also provides pictures to illustrate powder metal parts currently used in engines, transmissions, body applications, and pumps. It briefly discusses powder forging and metal injection molding as two powder metal production processes.
HYBRID MOTORCYCLE
The document discusses the benefits of meditation for reducing stress and anxiety. Regular meditation practice can help calm the mind and body by lowering heart rate and blood pressure. Studies have shown that meditating for just 10-20 minutes per day can have significant positive impacts on both mental and physical health over time.
NOTIFICATION ON SECOND RESCHEDULING OF EXAM DATES FOR AFFILIATED COLLEGES MAY...
NOTIFICATION ON SECOND RESCHEDULING OF EXAM DATES FOR AFFILIATED COLLEGES MAY...Prasanth Kumar RAGUPATHY
NOTIFICATION ON SECOND RESCHEDULING OF EXAM DATES FOR
AFFILIATED COLLEGES MAY/JUNE 2012 EXAMINATIONS
As per the original Time Table given, Anna University Theory Examinations for
Affiliated Colleges, Constituent Colleges and University Departments of Anna
Universities of Technology (AUTs) (May/June 2012) were to commence on 3.5.2012.
But due to administrative reasons, the examinations on 3rd, 4th, 5th May 2012 were
rescheduled on 28th, 29th and 30th May 2012 and the examinations on 28th, 29th and 30th
May 2012 were rescheduled on 7th, 8th, and 9th June 2012.
Now all the examinations starting from 7.5.2012 are rescheduled again
shifting by exactly 7 days.GRE High Frequency Words
This document contains a list of vocabulary words along with their definitions. It begins with words like "abase" meaning "make someone lower in rank or position" and "abdicate" meaning "formally give up an office." It continues providing definitions for roughly 60 additional words, with parts of speech and examples for many. The list covers a wide range of topics and includes words such as "aesthetic," "altruistic," "amalgamate," and "anathema."
Design of transmission systems qb
This document contains question bank for the 6th semester Mechanical Engineering course on Design of Transmission Systems at Anna University. It includes questions from 4 units - Design of Belt, Rope and Chain Drives; Design of Gear Drives; Design of Gear Boxes; and Design of Clutches and Brakes. The questions are both short answer type and long answer/design problems. Some examples of long answer questions include designing belt drives, gear drives, gear boxes, wire rope drives and clutch/brake systems.
Me2351 gas dynamics and jet propulsion-qb
The document contains questions related to gas dynamics and jet propulsion. It covers topics such as compressible and incompressible fluids, stagnation pressure and temperature, Mach number, zones of action and silence, open and closed systems, intensive and extensive properties, shock waves, normal and oblique shocks, jet and rocket propulsion, rocket engine classifications, specific impulse, specific consumption, thrust coefficient, propulsive efficiency, Fanno and Rayleigh flows, and one-dimensional isentropic flow through nozzles, ducts, and diffusers. The questions range from definitions and differentiations to derivations and multi-step calculations involving isentropic flow equations.
Finite element analysis qb
This document contains 10 questions each from 10 units on the topic of finite element analysis. The questions cover various fundamental concepts in FEA including finite element modeling techniques like shape functions, interpolation functions, stiffness matrices, boundary conditions etc. They also involve solving sample problems using techniques like Gauss elimination, Rayleigh-Ritz method, Galerkin's method and computing stresses, displacements, temperatures etc.
Me2354 automobile engineering-qb
This document contains a question bank for an Automobile Engineering course, with questions ranging from 2-16 marks. It includes questions on topics such as vehicle systems, engine components and systems, fuels, batteries, ignition systems, transmission, steering, suspension, brakes and alternative fuel technologies. The questions cover definitions, explanations, comparisons, and involve diagrams and sketches in some longer answer questions.
Mg2351. principles of management 2mark
This document provides definitions and short explanations of management concepts. It covers topics such as the five functions of management (planning, organizing, staffing, leading, controlling), managerial skills, productivity, goals, policies, procedures, budgets, management by objectives, decision making, risk analysis, and social responsibility. It also discusses organizational structure, types of organizational charts, departmentation, power, authority, and leadership styles. The document is a study guide that defines and explains various foundational management principles in brief form.
MG2351-PRINCIPLES OF MANAGEMENT
The document discusses various concepts related to the principles of management. It defines management as a continuous process of designing and maintaining an environment for people to work together to efficiently achieve goals. It describes management as both an art and a science. The key functions of management are identified as planning, organizing, staffing, directing and controlling. Scientific management and contributions of theorists like Taylor, Fayol and others are summarized.
Industrial robotics
This document provides an overview of industrial robotics, including robot anatomy, control systems, end effectors, applications, and programming. It describes the typical components of a robot like links, joints, drives, and sensors. Common robot configurations and their joint notation are shown. The document also discusses robot programming methods including leadthrough and textual languages, as well as simulation for offline programming.
Anna University UG Project Report Format
The document provides guidelines for preparing project reports for B.E., B.Tech., and B.Arch. degrees at Anna University in Chennai, India. It specifies the required sections and their order, including a cover page, bonafide certificate, abstract, table of contents, lists of tables and figures, chapters, appendices, and references. Formatting requirements are also outlined, such as the report dimensions, binding, fonts, spacing, and page numbering. Sample templates are provided for the cover page, bonafide certificate, and table of contents.
Bhel 3
The document summarizes the pattern of a placement test taken at BHEL. It consisted of 240 multiple choice questions with 120 questions each on technical and aptitude/general English sections. The technical questions covered basics of mechanical engineering, directly from textbooks on power systems and objective question banks. The aptitude section included questions on error identification, antonyms, synonyms and passages. Thirty questions involved relating statements using relations such as equal, greater than, less than. The test was timed for 150 minutes to complete all 240 questions.
Bajaj 1
The document summarizes the process and rounds of a placement paper for Bajaj. It consisted of 3 rounds - 1) A 1 hour written test with 53 questions split between technical and aptitude sections. 2) A group discussion round with topics related to food production and marketing. 3) A personal interview. The technical section included questions on engineering concepts like materials, machining, cycles etc. The aptitude section included questions on data interpretation from tables and charts, logical reasoning and statements.
The ultimate resume guide for freshers
This article is intended to serve as a comprehensive guide to creating a resume for a fresh graduate. This post clearly articulates all the sections that are needed to be included in a standard resume. Each section is explained with examples. You can also find sample resumes at the end of this article. Please note that this article doesn’t cover anything related to formatting of a resume. Formatting of resume using Word shall be covered as a separate blog post in near future. Also resume formats vary from country to country. This format in particularly is the de facto standard followed by freshers in India. This article was written after extensively researching many resumes on the internet.
Verbal reasoning
Teacher ::
a) Student: Class
b) Nurse: Doctor
c) Employee: Manager
d) Apprentice: Master
e) Secretary: President
The relationship between assistant and teacher is that of helper/aide to the person in charge. The parallel relationship here is apprentice to master, as an apprentice helps and learns from their master, similar to an assistant helping and learning from a teacher.
The answer is d) Apprentice: Master.
More from Prasanth Kumar RAGUPATHY (20)
Advanced Machining Processes - Unconventional Machining Processes
Advanced Machining Processes - Unconventional Machining Processes
NOTIFICATION ON SECOND RESCHEDULING OF EXAM DATES FOR AFFILIATED COLLEGES MAY...
NOTIFICATION ON SECOND RESCHEDULING OF EXAM DATES FOR AFFILIATED COLLEGES MAY...
Recently uploaded
Call Girls Pune 7023059433 Vip Escorts Service in Pune
Call Girls Pune 7023059433 Vip Escorts Service in Pune
欧洲杯下注-欧洲杯下注下注app-欧洲杯下注盘口app|【网址🎉ac22.net🎉】
【网址🎉ac22.net🎉】欧洲杯下注是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。欧洲杯下注通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，欧洲杯下注提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
Unlimited Short Call Girls Mumbai ✅ 9930496246 FULL CASH PAYMENT
Unlimited Short Call Girls Mumbai ✅ 9930496246 FULL CASH PAYMENT
体育博彩-体育博彩赔率-体育博彩冠军赔率|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】体育博彩在体育博彩方面，不难发现，体育博彩多为英式运动提供投注。体育博彩为丰富多彩的体育项目提供投注，如足球、赛马、板球和飞镖，但这不是体育博彩的唯一优势。在体育博彩，全世界玩家都可以找到自己感兴趣的比赛进行投注。体育博彩为网球和美式运动如棒球、美式足球、篮球、冰球开出的投注同样值得关注。在夏季或冬季奥运会方面，体育博彩为玩家开出了丰富多彩的服务，是你的不二之选。你还可以投注水球、自行车和班迪球等小众体育项目，甚至可以为武术、拳击和综合格斗投注。体育博彩为众多体育项目开出滚球投注。
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Unlimited Short Call Girls Noida ✅ 9711199171 FULL CASH PAYMENT
Unlimited Short Call Girls Noida ✅ 9711199171 FULL CASH PAYMENT
Unlimited Short Call Girls Thane ✅ 9004268417 FULL CASH PAYMENT
Unlimited Short Call Girls Thane ✅ 9004268417 FULL CASH PAYMENT
Call Girls in Chennai (Tamil Nadu ) call me [🔝7737669865🔝] Escort In Chennai ...
Call Girls in Chennai (Tamil Nadu ) call me [🔝7737669865🔝] Escort In Chennai service 24X7
Cargador frontal volvo L350F, para el trabajo en cantera en carga de rocas
Descripción técnica del cargador frontal Volvo L350 F
一比一原版悉尼大学毕业证(USYD毕业证书)学历如何办理
精仿办理【微信号:176555708】【精仿办理(USYD毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
世预赛下注-世预赛下注下注平台-世预赛下注投注平台|【网址🎉ac44.net🎉】
【网址🎉ac44.net🎉】世预赛下注是爱尔兰的博彩公司，成立于1988年，位于爱尔兰的都柏林。世预赛下注通过在爱尔兰和英国的一系列持牌博彩商店以及经营爱尔兰最大的电话博彩服务来开展业务。在互联网上，世预赛下注提供体育博彩，在线扑克，在线宾果游戏，在线赌场和在线游戏。
欧洲杯足彩-滚球欧洲杯足彩-欧洲杯足彩滚球平台|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】欧洲杯足彩是此世界知名网上博彩平台的特点是对英超、英冠以及英国的赛事准确率很高，赔率很少变动。欧洲杯足彩平台的赔率一旦出现变动，其它英国和国外的赛事赔率都会因而出现变动，欧洲杯足彩对业界的影响力可见一斑。
Recently uploaded (20)
Call Girls Pune 7023059433 Vip Escorts Service in Pune
Call Girls Pune 7023059433 Vip Escorts Service in Pune
Annual report on mahindra and mahindra on supply chain analysisdf
Annual report on mahindra and mahindra on supply chain analysisdf
Unlimited Short Call Girls Mumbai ✅ 9930496246 FULL CASH PAYMENT
Unlimited Short Call Girls Mumbai ✅ 9930496246 FULL CASH PAYMENT
7 QC Tools ppt for presentation for training purpose
7 QC Tools ppt for presentation for training purpose
hays salary report for 2024: check out your salaries here
hays salary report for 2024: check out your salaries here
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Top-Quality AC Service for Mini Cooper Optimal Cooling Performance
Unlimited Short Call Girls Noida ✅ 9711199171 FULL CASH PAYMENT
Unlimited Short Call Girls Noida ✅ 9711199171 FULL CASH PAYMENT
Unlimited Short Call Girls Thane ✅ 9004268417 FULL CASH PAYMENT
Unlimited Short Call Girls Thane ✅ 9004268417 FULL CASH PAYMENT
Call Girls in Chennai (Tamil Nadu ) call me [🔝7737669865🔝] Escort In Chennai ...
Call Girls in Chennai (Tamil Nadu ) call me [🔝7737669865🔝] Escort In Chennai ...
Cargador frontal volvo L350F, para el trabajo en cantera en carga de rocas
Cargador frontal volvo L350F, para el trabajo en cantera en carga de rocas