The document is a quotation from PROTEM regarding their KPRO-50 portable plate beveling machine. Some key details: - The KPRO-50 is a double sided beveling machine that can efficiently bevel steel, stainless steel, and aluminum plates from 7-70mm thick. - It is mounted on a 3D manipulator which allows it to compensate for uneven floors or plate deformations. The manipulator also allows the machine to rotate 180 degrees to bevel both sides of a plate. - The machine can bevel at angles from 15-60 degrees without replacing parts. It is powered by a 4,000W milling head and electric feed motors.

1. QUOTATION
N°7525
This quotation refers exclusively to the general terms of sales of PROTEM. Subject to modification without prior information. The content of this quotation is confidential and this document is unique and is
PROTEM property, it cannot be corrected, duplicated or modified without the written agreement of PROTEM. PROTEM general terms of sale prevail on any other terms. In addition, the present offer
represents the document of reference which allows the customer to issue an order. Any clause stipulating that the PROTEM general terms of sale are not opposable is void.
Page 3/8
PROTEM – Z.I. Les bosses – 26800 ETOILE SUR RHONE - FRANCE
Tel : + 33 (0) 4 75 57 41 41 – Fax : + 33 (0) 4 75 57 41 49
S.A.S. au capital de 600 000 € - TVA N° FR 87 333 046 712 –RCS ROMANS B 333 046 712 –www.protem.fr
PORTABLE PLATE BEVELER KPRO-50
Non contractual pictures
x The KPRO-50 is a very efficient, double sided beveling
machine allowing to bevel standard steel and also
stainless steel and aluminium material.
x the KPRO -50 beveler is "floating" on 3D
MANIPULATOR and compensates the unevenness of
the floor or the deformations of the steel plate.
x Quick fittings allow to disassemble the KPRO-50and the
manipulator when working , and without any tooling
x The 3D MANIPULATOR allows to adjust the height of
the machine by means of a manual lift handle.
x The machine can bevel with or without the 3D
MANIPULATOR .
x the electric circuit is enclosed in a dust proof box
and is equipped with all the necessary safety
devices.
x CE conformity
Technical specifications :
x thickness of material: from 7 to 70 mm
x minimum dimension of material: 200 x 100 x 7 mm,
with equipment for bevelling small flat steel
maximum dimension of material: unlimited
15-60° infinitely variable angle, without replacing
any partt
x Engine milling head: power 4 000 W / 400 V / 3
phases / 50 Hz
x cutting speed: 182,92 m/min
milling head: 85 mm with 5 inserts
x feed: 2x engine, power 120 W / 400 V / 3 phases /
50 Hz,
automatic feed speed adjustment with inverter 0-1,2
m/min, adjustment depends on cutting conditions
and material
x Machine weight175 Kg (UZ 50 + 3D MANIPULATOR)
Manipulator KPRO-50
x This manipulator allows to get a 180° rotation of the
machine so as to perform a double-sided bevel (X or
K profile). The operator does not need a crane
anymore to rotate the plate which saves a lot of time.
x The unique clamping system allows to fix the KPRO-
15 into the manipulator and to release it in a few
seconds without using tooling
x the beveler is "floating" on MANIPULATOR 3D
and compensates the unevenness of the floor or
the deformations of the steel plate.
x It is possible to move the manipulator by means of its
large wheels.
x Easy and quick adjustment of the machine height by
means of a rank and pinion integrated into the
manipulator.
x It is possible de chanfreiner avec ou sans le
manipulateur et d'utiliser le manipulateur comme
poste stationnaire.