Polystyene coating
•
1 like•374 views
The document describes a student project to coat asbestos roofing with polystyrene to reduce heat absorption and promote recycling of polystyrene. The student dissolved polystyrene in benzaldehyde to create a paint and coated an asbestos roof. Temperature measurements found a 6 degree Fahrenheit reduction under the coated roof, demonstrating reduced heat penetration. The student concluded that coating asbestos with polystyrene helped create a more eco-friendly environment by recycling polystyrene and reducing heat absorption by the roof.
Report
Share
Report
Share
Recommended
Christmas greetings 2010
The document summarizes the climate control strategy used at Liselund mansion, a historic building located on the island of Moen near the Baltic Sea. To preserve the interior objects from damage caused by fluctuations in humidity, a dehumidifier controls the relative humidity to 60% year-round by supplying dried air through floor ducts. This strategy helps prevent mold growth and insect infestation at a cost of 15 megawatt hours per year. Small inlet grills are the only visible sign of the climate control system within the interior spaces of the historic mansion.
Residential Restoration
This document discusses case studies of hydroxyl generating technology being used to restore homes damaged by disasters such as fires and oil purges. In four case studies from 2009 in Pennsylvania and Florida, hydroxyl generators were able to eliminate odors from the air and surfaces in homes that had experienced fires, smoke damage, or an oil spill. The technology successfully deodorized entire homes and salvaged expensive items from smoke and odor damage.
Behavior of high performance nickel alloys in vigorous chemical media
The sensitivity to cracking of Inconel 600 widely depend on the environmental factors like temperature, level of tensile stress, deformation rate, availability of hydrogen gas, solution pH value.
Four ways to prevent corrosion
Corrosion is an oxidation process in which the quality of metal gets damage when it comes in contact with the environment. Read this infographic to know how to prevent metal from corrosion.
Green speak hbd flier
Homes By Dickerson outlines their top 10 green home features:
1. ZIP system air barrier to prevent air infiltration.
2. Foil-backed plywood to reflect heat and improve energy efficiency.
3. Framing to maximize insulation and reduce air infiltration.
4. Low-E energy star windows to reduce heat transfer.
5. Properly-sized HVAC to evenly condition the home and reduce energy costs.
6. Water-efficient faucets and shower heads approved by the EPA.
Saveenergy12
Installing double glazed windows, cavity wall insulation, loft insulation, draught exclusion around doors and windows, and carpeting can help reduce energy losses from a home. This leads to advantages like using less fuel to heat the home, lower heating bills, conservation of energy sources, and less pollution. Double glazing can reduce energy passing through windows by 50% compared to single glazed windows. Filling cavity walls with insulation and insulating the loft helps prevent heat from escaping through exterior walls and upstairs ceilings.
Thermal insulation of building
In this presentation we will learn how the thermal insulation of building can be done. Different materials used for thermal insulation and methods to do it are explained.
Lecture 7 thermal insulation
Thermal insulation materials and methods are used to reduce heat transfer between environments of different temperatures. Insulation works by inhibiting conduction, convection, and radiation heat transfer. Common insulating materials create air pockets that provide thermal resistance. Proper building insulation can significantly reduce heating and cooling costs by maintaining comfortable interior temperatures while preventing exterior temperature fluctuations. The R-value quantifies a material's thermal resistance and insulation effectiveness.
Recommended
Christmas greetings 2010
The document summarizes the climate control strategy used at Liselund mansion, a historic building located on the island of Moen near the Baltic Sea. To preserve the interior objects from damage caused by fluctuations in humidity, a dehumidifier controls the relative humidity to 60% year-round by supplying dried air through floor ducts. This strategy helps prevent mold growth and insect infestation at a cost of 15 megawatt hours per year. Small inlet grills are the only visible sign of the climate control system within the interior spaces of the historic mansion.
Residential Restoration
This document discusses case studies of hydroxyl generating technology being used to restore homes damaged by disasters such as fires and oil purges. In four case studies from 2009 in Pennsylvania and Florida, hydroxyl generators were able to eliminate odors from the air and surfaces in homes that had experienced fires, smoke damage, or an oil spill. The technology successfully deodorized entire homes and salvaged expensive items from smoke and odor damage.
Behavior of high performance nickel alloys in vigorous chemical media
The sensitivity to cracking of Inconel 600 widely depend on the environmental factors like temperature, level of tensile stress, deformation rate, availability of hydrogen gas, solution pH value.
Four ways to prevent corrosion
Corrosion is an oxidation process in which the quality of metal gets damage when it comes in contact with the environment. Read this infographic to know how to prevent metal from corrosion.
Green speak hbd flier
Homes By Dickerson outlines their top 10 green home features:
1. ZIP system air barrier to prevent air infiltration.
2. Foil-backed plywood to reflect heat and improve energy efficiency.
3. Framing to maximize insulation and reduce air infiltration.
4. Low-E energy star windows to reduce heat transfer.
5. Properly-sized HVAC to evenly condition the home and reduce energy costs.
6. Water-efficient faucets and shower heads approved by the EPA.
Saveenergy12
Installing double glazed windows, cavity wall insulation, loft insulation, draught exclusion around doors and windows, and carpeting can help reduce energy losses from a home. This leads to advantages like using less fuel to heat the home, lower heating bills, conservation of energy sources, and less pollution. Double glazing can reduce energy passing through windows by 50% compared to single glazed windows. Filling cavity walls with insulation and insulating the loft helps prevent heat from escaping through exterior walls and upstairs ceilings.
Thermal insulation of building
In this presentation we will learn how the thermal insulation of building can be done. Different materials used for thermal insulation and methods to do it are explained.
Lecture 7 thermal insulation
Thermal insulation materials and methods are used to reduce heat transfer between environments of different temperatures. Insulation works by inhibiting conduction, convection, and radiation heat transfer. Common insulating materials create air pockets that provide thermal resistance. Proper building insulation can significantly reduce heating and cooling costs by maintaining comfortable interior temperatures while preventing exterior temperature fluctuations. The R-value quantifies a material's thermal resistance and insulation effectiveness.
Thermal insulation -From IIT Madras
About thermal insulation properties and different materials which are used commonly for thermally insulating a building. Contact for more information regarding PPT
Cool Roofs: Cost Effective Technology for Better Buildings, Healthier Cities ...
Cool Roofs: Cost Effective Technology for Better Buildings, Healthier Cities ...International Energy Agency
Cool Roofs: Cost Effective Technology for Better Buildings, Healthier Cities and a Cooler Planet
Kurt SCHICKMAN from Global Cool Cities AllianceIndoor Environment
City and Town Planning officers training, Dr. MCR HRD, IAP, Andhra Pradesh, Ppt by Dr. N. Sai Bhaskar Reddy
ETHYLENTE-TETRAFLUOROETHYLENE PANELS
This document provides information on ethylene tetrafluoroethylene (ETFE), a transparent polymer material used in construction. ETFE is lightweight, durable, and energy efficient. It is made through a process involving chemicals like fluorine and ethylene. ETFE systems are used in buildings as single or multilayer inflated cushions to form roofs or facades. Compared to glass, ETFE has advantages like flexibility, low weight, and insulation properties. It has been used successfully in notable structures like the Eden Project and Beijing National Stadium. The document discusses properties, applications, manufacturing, and case studies of ETFE.
BIO brochure email version
Bioclimatic solutions are passive cooling building materials designed for tropical climates. They include bioclimatic envelope, floor, and roof systems that reduce heat transfer and allow moisture vapor to escape from buildings. This decreases energy costs and indoor temperature fluctuations while preventing mold and moisture damage. The materials are made from recycled glass, are breathable and water resistant, and their installation can lower construction costs compared to traditional methods.
Green needham nsl weatherization capes
This document discusses weatherization opportunities and challenges for Cape style homes. It describes Green Needham and Next Step Living weatherizing over 500 homes since 2012, saving homeowners an average of $500 per year. Key areas to focus on include the attic cap, knee wall area, and slopes of upstairs rooms. Installing foam board and spray foam in knee walls and dense packing cellulose in knee wall floors can insulate and air seal. Replacing single pane windows and attic/wall hatches also improves efficiency. Heat pumps and high-efficiency heating systems are eligible for 0% interest loans.
thermal insulation of building
1. This project proposal outlines a study to assess the high temperature and innovative insulation performance of residential buildings.
2. The objectives are to resist heat transfer through walls and roofs and minimize energy losses. Two models will be constructed, one without insulation and one with various insulation materials, and their inner temperatures will be compared using a potentiometer.
3. A literature review found that materials like aerogel and vacuum insulation panels can provide high insulation with thinner layers than traditional materials like fiberglass or polystyrene. The study aims to demonstrate the need for thermal insulation in buildings.
Evaluation Question Three
Bauer Media Group would be the best company to distribute the magazine. While WHSmiths and online subscriptions could also be good options for reaching a young audience, Bauer Media Group leaves more space in their music magazine offerings for a new pop music-focused magazine. Distributing through Bauer would allow the magazine to capture a wider audience, specifically younger females, in a market niche not fully addressed in their current magazine portfolio. This wider reach makes Bauer Media Group more likely to successfully sell and profit from the new magazine.
existing production companies
Blink Productions is a respected UK production company founded in 1985 that has received numerous awards including Production Company of the Year. They are known for producing the popular John Lewis Christmas adverts. NTSH London is an innovative production company established in 2009 that creates music videos, commercials, and other content for worldwide clients. They have produced videos for artists like Pendulum and Ellie Goulding. Propaganda Films is a US-based music video production company founded in 1986 that came to produce a third of all American music videos by 1990 before being acquired by PolyGram in 1991.
Tumblr social media post
The social media account on Tumblr uses consistent branding across platforms by featuring the same header image and profile picture used on other accounts to appeal to a younger, female audience. Posts on the Tumblr account advertise the artist's new album by utilizing the same cover art image seen across other marketing materials to make the account more recognizable.
Facebook social media
This social media account for a pop artist maintains consistency across platforms to be more recognizable. The header, profile picture, and posts all feature the same image of the artist used on other accounts and the album cover. This common branding and personal posts create the illusion that the artist directly engages with fans, mimicking strategies used by other pop artists to form connections with their audience.
Campus party 2013 sc
Campus Party es el mayor festival tecnológico del mundo que reúne a miles de jóvenes talentos de Europa y Latinoamérica desde 1997 para aprender, crear e interactuar en un entorno de innovación, creatividad, ciencia y entretenimiento digital. Su objetivo es crear la mayor comunidad geek de la tierra y difundir su conocimiento a través de eventos que ofrecen una experiencia generalista y formativa con diferentes plataformas y colectivos.
Evaluation question one
My magazine follows the conventions of traditional music magazines. The front cover uses a large image of the main artist interviewed alongside smaller images of other featured artists, just like other music magazines. The contents page also adheres to conventions by using multiple artist images and an editor's note. The double page spread fits expectations by prominently displaying the main artist in multiple photos with a large heading, as is common for the primary feature. The consistent pink and purple color scheme aims to appeal to the young female target audience, mirroring traditional magazines in this genre.
Evaluation question two
This document analyzes how a media product represents social groups. It summarizes that a pink and purple color scheme, bright colors, images of young pop artists like Ariana Grande, and stories about artists' love lives are likely to attract a young female audience aged 10-16. A £1.50 price point also appeals to younger audiences. These design choices may deter older and male audiences.
Kb industries
Established in the year 2009, we, Powertech Industrial Equipments, are a leading manufacturer and supplier of a comprehensive range of Hydraulic Equipments and Accessories that is inclusive of Steam Sterilizers, Hydraulic Powerpacks and Hydraulic Cylinders.
Social Media - Twitter
The Twitter page of a pop artist is summarized in 3 sentences:
The header picture follows a pink theme related to the artist and prominently features their face to be easily recognizable. The profile picture also mainly shows the artist's face, which is important for pop artists to be identified by. Tweets from the artist are used on the full page to personally engage with fans, as done by pop stars like Taylor Swift who tweet updates about music videos and tours.
Tumblr social media post
The social media account on Tumblr uses consistent branding across platforms by utilizing the same header image and profile picture used on other accounts to appeal to a younger, female audience. Posts on the Tumblr account further advertise the artist's new album by using recognizable images from the album packaging to promote recognition and visibility of the account.
The middle ages
The document summarizes aspects of music during the Middle Ages, specifically the Dark Ages (450-1000 AD) and High Middle Ages (1000-1450 AD). It describes how the Roman Catholic Church filled a void of authority after the fall of Rome. Plainchant, or Gregorian chant, was the primary sacred music and was monophonic and unaccompanied. The High Middle Ages saw the development of polyphony, musical notation, and composers like Leonin and Perotin of the Notre Dame school. Secular music emerged through troubadours and trouveres. The 14th century was a time of crisis and saw the development of isorhythm and composers like Machaut in the Ars Nova style.
Powertech industrial-equipment
Powertech Industrial Equipment is a manufacturer and supplier of hydraulic equipment and accessories established in 2009. They offer a wide range of products including steam sterilizers, hydraulic powerpacks, cylinders, tube expanders, and other industrial equipment. The company prides itself on using advanced machinery and quality control processes to manufacture reliable, high-quality products for industries such as engineering, pharmaceuticals, and chemicals.
Tercera sesión taller de poesía
El documento trata sobre el origen de la poesía. Menciona que es difícil establecer una fecha precisa para su nacimiento, ya que sus orígenes se remontan al propio lenguaje humano. Señala algunos de los primeros registros poéticos que se han encontrado, como inscripciones jeroglíficas egipcias del año 2600 a.C. Además, indica que varios pueblos antiguos como los asirio-babilónicos y los judíos acudían a la poesía con fines comunitarios y rituales.
2ª sesión taller poesía.
El documento define la rima como la repetición de sonidos en los versos de un poema. Explica que los poemas están formados por versos agrupados en estrofas, como pareados o tercetos. Además, presenta algunas figuras literarias como la comparación, la personificación, la hipérbole y la metáfora, dando ejemplos de cada una.
La poesía.
Este documento define la poesía como un género literario que transmite estados de ánimo y sentimientos a través de versos breves. Explica que existen tres tipos principales de poesía: épica, que mezcla lo real y lo imaginario en prosa o verso largo; dramática, que cuenta historias a través de diálogos; y lírica, que expresa sentimientos a través de la canción en primera persona. Además, incluye un enlace a un video sobre la poesía.
More Related Content
What's hot
Thermal insulation -From IIT Madras
About thermal insulation properties and different materials which are used commonly for thermally insulating a building. Contact for more information regarding PPT
Cool Roofs: Cost Effective Technology for Better Buildings, Healthier Cities ...
Cool Roofs: Cost Effective Technology for Better Buildings, Healthier Cities ...International Energy Agency
Cool Roofs: Cost Effective Technology for Better Buildings, Healthier Cities and a Cooler Planet
Kurt SCHICKMAN from Global Cool Cities AllianceIndoor Environment
City and Town Planning officers training, Dr. MCR HRD, IAP, Andhra Pradesh, Ppt by Dr. N. Sai Bhaskar Reddy
ETHYLENTE-TETRAFLUOROETHYLENE PANELS
This document provides information on ethylene tetrafluoroethylene (ETFE), a transparent polymer material used in construction. ETFE is lightweight, durable, and energy efficient. It is made through a process involving chemicals like fluorine and ethylene. ETFE systems are used in buildings as single or multilayer inflated cushions to form roofs or facades. Compared to glass, ETFE has advantages like flexibility, low weight, and insulation properties. It has been used successfully in notable structures like the Eden Project and Beijing National Stadium. The document discusses properties, applications, manufacturing, and case studies of ETFE.
BIO brochure email version
Bioclimatic solutions are passive cooling building materials designed for tropical climates. They include bioclimatic envelope, floor, and roof systems that reduce heat transfer and allow moisture vapor to escape from buildings. This decreases energy costs and indoor temperature fluctuations while preventing mold and moisture damage. The materials are made from recycled glass, are breathable and water resistant, and their installation can lower construction costs compared to traditional methods.
Green needham nsl weatherization capes
This document discusses weatherization opportunities and challenges for Cape style homes. It describes Green Needham and Next Step Living weatherizing over 500 homes since 2012, saving homeowners an average of $500 per year. Key areas to focus on include the attic cap, knee wall area, and slopes of upstairs rooms. Installing foam board and spray foam in knee walls and dense packing cellulose in knee wall floors can insulate and air seal. Replacing single pane windows and attic/wall hatches also improves efficiency. Heat pumps and high-efficiency heating systems are eligible for 0% interest loans.
thermal insulation of building
1. This project proposal outlines a study to assess the high temperature and innovative insulation performance of residential buildings.
2. The objectives are to resist heat transfer through walls and roofs and minimize energy losses. Two models will be constructed, one without insulation and one with various insulation materials, and their inner temperatures will be compared using a potentiometer.
3. A literature review found that materials like aerogel and vacuum insulation panels can provide high insulation with thinner layers than traditional materials like fiberglass or polystyrene. The study aims to demonstrate the need for thermal insulation in buildings.
What's hot (7)
Cool Roofs: Cost Effective Technology for Better Buildings, Healthier Cities ...
Cool Roofs: Cost Effective Technology for Better Buildings, Healthier Cities ...
Viewers also liked
Evaluation Question Three
Bauer Media Group would be the best company to distribute the magazine. While WHSmiths and online subscriptions could also be good options for reaching a young audience, Bauer Media Group leaves more space in their music magazine offerings for a new pop music-focused magazine. Distributing through Bauer would allow the magazine to capture a wider audience, specifically younger females, in a market niche not fully addressed in their current magazine portfolio. This wider reach makes Bauer Media Group more likely to successfully sell and profit from the new magazine.
existing production companies
Blink Productions is a respected UK production company founded in 1985 that has received numerous awards including Production Company of the Year. They are known for producing the popular John Lewis Christmas adverts. NTSH London is an innovative production company established in 2009 that creates music videos, commercials, and other content for worldwide clients. They have produced videos for artists like Pendulum and Ellie Goulding. Propaganda Films is a US-based music video production company founded in 1986 that came to produce a third of all American music videos by 1990 before being acquired by PolyGram in 1991.
Tumblr social media post
The social media account on Tumblr uses consistent branding across platforms by featuring the same header image and profile picture used on other accounts to appeal to a younger, female audience. Posts on the Tumblr account advertise the artist's new album by utilizing the same cover art image seen across other marketing materials to make the account more recognizable.
Facebook social media
This social media account for a pop artist maintains consistency across platforms to be more recognizable. The header, profile picture, and posts all feature the same image of the artist used on other accounts and the album cover. This common branding and personal posts create the illusion that the artist directly engages with fans, mimicking strategies used by other pop artists to form connections with their audience.
Campus party 2013 sc
Campus Party es el mayor festival tecnológico del mundo que reúne a miles de jóvenes talentos de Europa y Latinoamérica desde 1997 para aprender, crear e interactuar en un entorno de innovación, creatividad, ciencia y entretenimiento digital. Su objetivo es crear la mayor comunidad geek de la tierra y difundir su conocimiento a través de eventos que ofrecen una experiencia generalista y formativa con diferentes plataformas y colectivos.
Evaluation question one
My magazine follows the conventions of traditional music magazines. The front cover uses a large image of the main artist interviewed alongside smaller images of other featured artists, just like other music magazines. The contents page also adheres to conventions by using multiple artist images and an editor's note. The double page spread fits expectations by prominently displaying the main artist in multiple photos with a large heading, as is common for the primary feature. The consistent pink and purple color scheme aims to appeal to the young female target audience, mirroring traditional magazines in this genre.
Evaluation question two
This document analyzes how a media product represents social groups. It summarizes that a pink and purple color scheme, bright colors, images of young pop artists like Ariana Grande, and stories about artists' love lives are likely to attract a young female audience aged 10-16. A £1.50 price point also appeals to younger audiences. These design choices may deter older and male audiences.
Kb industries
Established in the year 2009, we, Powertech Industrial Equipments, are a leading manufacturer and supplier of a comprehensive range of Hydraulic Equipments and Accessories that is inclusive of Steam Sterilizers, Hydraulic Powerpacks and Hydraulic Cylinders.
Social Media - Twitter
The Twitter page of a pop artist is summarized in 3 sentences:
The header picture follows a pink theme related to the artist and prominently features their face to be easily recognizable. The profile picture also mainly shows the artist's face, which is important for pop artists to be identified by. Tweets from the artist are used on the full page to personally engage with fans, as done by pop stars like Taylor Swift who tweet updates about music videos and tours.
Tumblr social media post
The social media account on Tumblr uses consistent branding across platforms by utilizing the same header image and profile picture used on other accounts to appeal to a younger, female audience. Posts on the Tumblr account further advertise the artist's new album by using recognizable images from the album packaging to promote recognition and visibility of the account.
The middle ages
The document summarizes aspects of music during the Middle Ages, specifically the Dark Ages (450-1000 AD) and High Middle Ages (1000-1450 AD). It describes how the Roman Catholic Church filled a void of authority after the fall of Rome. Plainchant, or Gregorian chant, was the primary sacred music and was monophonic and unaccompanied. The High Middle Ages saw the development of polyphony, musical notation, and composers like Leonin and Perotin of the Notre Dame school. Secular music emerged through troubadours and trouveres. The 14th century was a time of crisis and saw the development of isorhythm and composers like Machaut in the Ars Nova style.
Powertech industrial-equipment
Powertech Industrial Equipment is a manufacturer and supplier of hydraulic equipment and accessories established in 2009. They offer a wide range of products including steam sterilizers, hydraulic powerpacks, cylinders, tube expanders, and other industrial equipment. The company prides itself on using advanced machinery and quality control processes to manufacture reliable, high-quality products for industries such as engineering, pharmaceuticals, and chemicals.
Tercera sesión taller de poesía
El documento trata sobre el origen de la poesía. Menciona que es difícil establecer una fecha precisa para su nacimiento, ya que sus orígenes se remontan al propio lenguaje humano. Señala algunos de los primeros registros poéticos que se han encontrado, como inscripciones jeroglíficas egipcias del año 2600 a.C. Además, indica que varios pueblos antiguos como los asirio-babilónicos y los judíos acudían a la poesía con fines comunitarios y rituales.
2ª sesión taller poesía.
El documento define la rima como la repetición de sonidos en los versos de un poema. Explica que los poemas están formados por versos agrupados en estrofas, como pareados o tercetos. Además, presenta algunas figuras literarias como la comparación, la personificación, la hipérbole y la metáfora, dando ejemplos de cada una.
La poesía.
Este documento define la poesía como un género literario que transmite estados de ánimo y sentimientos a través de versos breves. Explica que existen tres tipos principales de poesía: épica, que mezcla lo real y lo imaginario en prosa o verso largo; dramática, que cuenta historias a través de diálogos; y lírica, que expresa sentimientos a través de la canción en primera persona. Además, incluye un enlace a un video sobre la poesía.
Repaso.verano.matematicas.5o
Este documento contiene ejercicios de repaso de matemáticas para 5o curso. Está dividido en 7 unidades que abarcan números naturales, operaciones con números naturales, división de números naturales, números decimales, operaciones con números decimales, fracciones y operaciones con fracciones. El documento proporciona más de 50 ejercicios de diferentes temas matemáticos para que los estudiantes repasen durante el verano.
Network Forensics Intro
A 1-day short course developed for visiting guests from Tecsup on network forensics, prepared in a day : ]
The requirements/constraints were 5-7 hours of content and that the target audience had very little forensic or networking knowledge. [For that reason, flow analysis was not included as an exercise, discussion of network monitoring solutions was limited, and the focus was on end-node forensics, not networking devices/appliances themselves]
Papercrete
Papercrete is a building material made from a mixture of shredded paper, water, and Portland cement. It can be poured into molds and sets into strong, lightweight blocks like concrete. Papercrete has insulating and sound absorbing properties that make it suitable for construction. While it is not structurally strong enough for load-bearing walls, papercrete can be used for inner walls and decoration. It is an environmentally friendly alternative to concrete that utilizes waste paper but lacks regulatory approval and its use at large scale could increase deforestation.
Viewers also liked (18)
Similar to Polystyene coating
Green House Effect
This presentation discusses the greenhouse effect and its causes and impacts. It begins with defining a greenhouse as a structure that traps heat from sunlight and defines the greenhouse effect as the warming of the atmosphere due to heat being trapped by greenhouse gases like carbon dioxide. It then lists the main human causes of increased greenhouse gases as deforestation, increased population, burning fossil fuels, industrial emissions, CFCs, nuclear reactors, and unchecked urbanization. The document discusses how the greenhouse effect is influencing the environment through melting ice caps, rising sea levels, ecological imbalance, increased health risks, and threats to animals. It concludes by recommending actions like planting trees, reducing fuel burning, installing industrial emissions filters, abandoning CFCs, responsible urban
plastic to fuel conversion.pptx
The document discusses converting plastic waste into fuel through pyrolysis and catalytic reforming. Plastic waste like polyethylene, polypropylene, and polystyrene are fed into a two-stage reactor system. In the first reactor, pyrolysis breaks the plastics down into oil, gas, and solid residues at temperatures around 450°C. The gas is then reformed over catalysts like zeolites in the second reactor. Catalytic reforming increases the gas fraction and improves the fuel properties. Testing on different plastic feeds and catalysts showed high density polyethylene produced the most oil, while polyethylene bags produced more gasoline or diesel depending on processing. The plastic oil quality was lower than commercial fuels but showed potential as a supplemental
Green house effect
The document discusses the greenhouse effect and its exposures in Bangladesh. It provides background on the greenhouse effect and how it leads to warming of the Earth's surface. It then discusses how human activities like burning fossil fuels are enhancing the greenhouse effect by adding more greenhouse gases to the atmosphere. This can lead to issues like faster ocean warming, sea level rise, and melting of polar ice caps. It also discusses impacts on Bangladesh like rises in sea levels and increased health problems. The document provides examples of organizations taking steps to reduce greenhouse gas emissions.
green house effect and global warming
Greenhouse gases like carbon dioxide, methane, and chlorofluorocarbons trap heat in the atmosphere, causing global warming. While a natural greenhouse effect keeps the Earth habitable, human activities like burning fossil fuels have enhanced this effect. Rising global temperatures lead to sea level rise, worsening natural disasters, and threats to food production. International agreements like the Montreal Protocol and Kyoto Protocol aim to limit greenhouse gases and mitigate climate change.
Global warming and_the_greenhouse_effect
This document discusses global warming and the greenhouse effect from Ms. Kopchick's Earth Science class. It defines the greenhouse effect and how an increase in greenhouse gases leads to global warming. It outlines the major greenhouse gases like carbon dioxide, methane, and nitrous oxide and their sources. The effects of global warming include rising sea levels, more extreme weather, habitat damage, and species extinction. The document discusses potential solutions to slow global warming like transitioning to renewable energy, reducing deforestation, and individual actions like using energy efficient appliances and compact fluorescent light bulbs.
Green house by soikot saha
This presentation discusses greenhouses and the greenhouse effect. It explains that a greenhouse allows heat from sunlight to enter through glass or plastic but traps heat inside, keeping the interior warm even in cold weather. Main greenhouse gases that contribute to this effect are carbon dioxide, water vapor, methane, ozone, and chlorofluorocarbons. The document lists sources of CO2 emissions and suggests steps that can be taken to control the greenhouse effect, such as reducing fossil fuel combustion and increasing reforestation.
Incineration
This document provides information on incineration and pyrolysis processes for waste treatment. It defines incineration as the combustion of organic waste materials at high temperatures, producing ash, flue gas and heat. Multiple chamber incinerators and municipal incinerators are described. Pyrolysis is defined as the thermal decomposition of organic materials through heating without oxygen. Dry and oxidizing pyrolysis methods are outlined. The advantages of each process are noted, such as reduced emissions and reusable byproducts for incineration, while the disadvantages include costs and incomplete waste reduction.
Thermocol A Threat To The Environment.pptx
Thermocol, also known as styrofoam or expanded polystyrene, is made from polystyrene and carbon dioxide. It is lightweight but highly polluting as it does not biodegrade and releases toxic gases when burned. Thermocol contaminates soil and water bodies, harming plant growth and marine life. Researchers have developed methods to recycle thermocol by compressing it using heat and pressure or dissolving it using solvents like acetone or orange peel extract. However, thermocol remains a major threat to the environment if not disposed of properly.
Epoxy
This document provides an overview of epoxy resins, including their chemistry, industrial formulations, safety, measuring, mixing, application techniques, and troubleshooting. It explains that epoxy resins are made through a chemical reaction that bonds smaller molecules into larger ones. The most common epoxy resin is diglycidyl ether of bisphenol A, which is cured using polyamine hardeners in an exothermic reaction. The curing rate depends on temperature, with higher temperatures resulting in faster curing times. The document provides information on properly handling, measuring, mixing, and applying epoxy resins for various industrial and hobby uses.
Greenhouse effect With Global Warming (Earth and Space)
The document discusses the greenhouse effect and greenhouse gases. It begins by explaining what a greenhouse is and how it works, trapping heat from the sun. It then draws an analogy between the greenhouse and Earth's atmosphere, which contains greenhouse gases like carbon dioxide and methane. These gases allow sunlight to pass through and warm the Earth but prevent heat from escaping, similar to how a greenhouse functions. The document notes that the greenhouse effect is natural but that human activities like burning fossil fuels have increased greenhouse gas levels and caused global warming. It identifies various greenhouse gases and their natural and human sources. In conclusion, it discusses some of the impacts of climate change and methods for preventing further impacts.
presentation on Greenhouse effect & climate change
Greenhouses trap heat from sunlight due to the presence of greenhouse gases like carbon dioxide and water vapor, creating a warm environment for plants. Natural greenhouse gases include water vapor, carbon dioxide, methane and nitrous oxide. Man-made sources that increase greenhouse gases are the burning of fossil fuels, deforestation, aerosols, and refrigerants. Increased greenhouse gases are causing global warming by trapping more heat in the atmosphere. This is leading to rising sea levels, changes in climate and wildlife, and more frequent extreme weather events. Prevention efforts include using green technology, reducing emissions, increasing awareness, and supporting international agreements.
Carbon Footprint
Showing how Our Earth is moving towards the extinction, what is carbon foot print?, how can we contribute to reduce them at individual and global level and finally hoping for a safe and bright future.
Ablative Materials
This document discusses ablative materials, which are used to protect structures from extremely high temperatures. It covers the history of ablators from early meteorites to modern plastics and ceramics. The main types - subliming, charring, and intumescent - are described. Ablation involves melting, chemical reactions, and vaporization that remove heat from surfaces. Advantages include weight savings and insulation, while limitations include susceptibility to forces. Applications include aerospace, manufacturing, and atmospheric re-entry. Future work aims to improve materials for more severe conditions and expand their usage.
polystyrene
poly styrene is a synthetic aromatic polymer made from the monomer styrene. Polystyrene can be solid or foamed. General purpose polystyrene is clear, hard, and rather brittle. It is an inexpensive resin per unit weight. polystyrene is in a solid (glassy) state at room temperature but flows if heated above about 100 °C, its glass transition temperature. It becomes rigid again when cooled .
PRODUCTION OF HARD SHEETS FROM MUNICIPAL SOLID WASTE
PRODUCTION OF HARD SHEETS FROM MUNICIPAL SOLID WASTEInternational Journal of Technical Research & Application
Waste is actually the biggest feed stock available for
processing, to produce useful and usable products. The
increasing amount of waste is a characteristic of the modern
human, though this discloses a more luxury life it presents an
environmental hazard that cannot be ignored. Following this
understanding we decided to impact on method of utilizing waste
and converting it into useful and usable products as well as
reducing the nuisance of waste. The methodology followed comes
in steps; first a random trial to detect the use of unsorted waste
and evaluating the equipment design, secondly improvement of
blending of different components of waste, thirdly improvement
of facilities for uniformity of heat and pressure, finally arriving
at suitable formula regarding the ratio of the different waste
components to give uniformity and better hold of the product.FLAME RETARDANT FINISH ON TEXTILES
to overcome the problem of easily fire catching to fabrics
it will reduce the wealth loss and causing material saving as well as it will cause healthy environment without sudden damage due to fire
chemicals treated are chlorine bromine , and also the bad effects of flame retardants
Green House Effect : Global Warming & Climate Change
The document discusses greenhouse gases and their role in global warming. It defines key terms like greenhouse, greenhouse effect, greenhouse gases, and climate change. It explains that greenhouse gases like carbon dioxide, methane and water vapor trap heat in the atmosphere and cause the greenhouse effect, which is responsible for rising global temperatures and climate change. Without some greenhouse effect, the Earth would be too cold to support life, but excess greenhouse gases are warming the planet to dangerous levels.
30 years in geopolymer applications
This document summarizes the development of geopolymer applications over 30 years by Prof. Joseph Davidovits and his research organizations. It describes early successes with fire-resistant wood panels in the 1970s, followed by applications of geopolymers in ceramics, bricks, and cement from the 1970s-1980s. A key innovation was developing a low-temperature process to transform kaolinite clay into a geopolymer binder. This led to liquid geopolymer binders in the 1980s and the invention of high-strength geopolymer cement in 1983 through a collaboration between Prof. Davidovits and Lone Star Industries.
Master's presentation
The document discusses the design of wall cladding composites suitable for the Egyptian environment. It aims to 1) design wall coverings that function aesthetically and thermally, 2) increase thermal insulation to decrease air conditioning usage and save energy, and 3) design UV and easy-clean resistant coverings. The study tests various woven fabric composites of polyester and polypropylene with different densities and laminations. Results found laminated fabrics had higher thermal insulation and strength than single fabrics. The highest insulators were polyester fabrics with densities of 300-450 denier laminated with a nonwoven layer.
The role of_absorbent_building_materials_in_modera
This document discusses using absorbent building materials to moderate changes in indoor relative humidity. It presents an experimental climate chamber that controls water vapor flux instead of relative humidity. A variety of common building materials were tested for their ability to buffer indoor humidity, including brick, wood, earth, lime mortar and gypsum. The best performing materials were wood oriented with grain perpendicular to exposure and a specially developed bentonite/perlite mixture. Absorbent walls can effectively buffer daily and even annual humidity variations in low-exchange buildings like archives. Absorbent materials can also be combined with mechanical HVAC to provide simpler and more stable humidity control in buildings requiring ventilation, like museums.
Similar to Polystyene coating (20)
Greenhouse effect With Global Warming (Earth and Space)
Greenhouse effect With Global Warming (Earth and Space)
presentation on Greenhouse effect & climate change
presentation on Greenhouse effect & climate change
PRODUCTION OF HARD SHEETS FROM MUNICIPAL SOLID WASTE
PRODUCTION OF HARD SHEETS FROM MUNICIPAL SOLID WASTE
Green House Effect : Global Warming & Climate Change
Green House Effect : Global Warming & Climate Change
The role of_absorbent_building_materials_in_modera
The role of_absorbent_building_materials_in_modera
Recently uploaded
This study Examines the Effectiveness of Talent Procurement through the Imple...
In the world with high technology and fast
forward mindset recruiters are walking/showing interest
towards E-Recruitment. Present most of the HRs of
many companies are choosing E-Recruitment as the best
choice for recruitment. E-Recruitment is being done
through many online platforms like Linkedin, Naukri,
Instagram , Facebook etc. Now with high technology E-
Recruitment has gone through next level by using
Artificial Intelligence too.
Key Words : Talent Management, Talent Acquisition , E-
Recruitment , Artificial Intelligence Introduction
Effectiveness of Talent Acquisition through E-
Recruitment in this topic we will discuss about 4important
and interlinked topics which are
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Join us for this solutions-based webinar on the tools and techniques for commissioning and maintaining PV Systems. In this session, we'll review the process of building and maintaining a solar array, starting with installation and commissioning, then reviewing operations and maintenance of the system. This course will review insulation resistance testing, I-V curve testing, earth-bond continuity, ground resistance testing, performance tests, visual inspections, ground and arc fault testing procedures, and power quality analysis.
Fluke Solar Application Specialist Will White is presenting on this engaging topic:
Will has worked in the renewable energy industry since 2005, first as an installer for a small east coast solar integrator before adding sales, design, and project management to his skillset. In 2022, Will joined Fluke as a solar application specialist, where he supports their renewable energy testing equipment like IV-curve tracers, electrical meters, and thermal imaging cameras. Experienced in wind power, solar thermal, energy storage, and all scales of PV, Will has primarily focused on residential and small commercial systems. He is passionate about implementing high-quality, code-compliant installation techniques.
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Power Electronics- AC -AC Converters.pptx
This PPT is about AC-AC Converters, including AC Voltage controllers and Cycloconverters, their types, and control.
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
smart pill dispenser is designed to improve medication adherence and safety f...
Smart Pill Dispenser that boosts medication adherence, empowers patients, enables remote monitoring, enhances safety, reduces healthcare costs, and contributes to data-driven healthcare improvements
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques
Unit -II Spectroscopy - EC I B.Tech.pdf
Chemical engineering and electronics engineering and chemical development of the day of the almighty paw paw paw
Recently uploaded (20)
This study Examines the Effectiveness of Talent Procurement through the Imple...
This study Examines the Effectiveness of Talent Procurement through the Imple...
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
Tools & Techniques for Commissioning and Maintaining PV Systems W-Animations ...
openshift technical overview - Flow of openshift containerisatoin
openshift technical overview - Flow of openshift containerisatoin
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
smart pill dispenser is designed to improve medication adherence and safety f...
smart pill dispenser is designed to improve medication adherence and safety f...
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques.ppt
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
Zener Diode and its V-I Characteristics and Applications
Zener Diode and its V-I Characteristics and Applications
Polystyene coating
- 3. AIM: 1. To recycle the polystyene for eco-friendly environment. 2. To reduce the warmth under the asbestos roof.
- 5. DISADVANTAGES: ASBESTOS: It leads to cancer. It increases room temperature. THERMOCOL(Polystyene): It is Non-Biodegradable. The fumes affect living beings and global warming. causes
- 6. PROCEDURE: STEP1: Polystyrene dissolves in organic solvent (benzaldehyde or benzyl alcohol) STEP2: It attains the paint consistency
- 7. STEP3: Added dye and fragrance
- 8. STEP4: Coated on Asbestos roof.
- 9. RESULT: Difference in temperature is observed Before Coating: 108.5F After Coating: 102.5F
- 10. CONCLUSION: The penetration of heat is reduced under asbestos roof. Successfully achieved an eco-friendly environment.
- 11. “there is a sufficiency in the world for man’s need but not for man’s greed”
- 12. BE GREEN;GO GREEN THANK YOU BY II YEAR CIVIL